- 29 1月, 2018 3 次提交
-
-
由 kbuild test robot 提交于
efx_default_channel_want_txqs() is only used in efx.c, while efx_ptp_want_txqs() and efx_ptp_channel_type (a struct) are only used in ptp.c. In all cases these symbols should be static. Fixes: 2935e3c3 ("sfc: on 8000 series use TX queues for TX timestamps") Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> [ecree@solarflare.com: rewrote commit message] Signed-off-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-01-26 This series contains updates to i40e and i40evf. Michal updates the driver to pass critical errors from the firmware to the caller. Patryk fixes an issue of creating multiple identical filters with the same location, by simply moving the functions so that we remove the existing filter and then add the new filter. Paweł adds back in the ability to turn off offloads when VLAN is set for the VF driver. Fixed an issue where the number of TC queue pairs was exceeding MSI-X vectors count, causing messages about invalid TC mapping and wrong selected Tx queue. Alex cleans up the i40e/i40evf_set_itr_per_queue() by dropping all the unneeded pointer chases. Puts to use the reg_idx value, which was going unused, so that we can avoid having to compute the vector every time throughout the driver. Upasana enable the driver to display LLDP information on the vSphere Web Client by exposing DCB parameters. Alice converts our flags from 32 to 64 bit size, since we have added more flags. Dave implements a private ethtool flag to disable the processing of LLDP packets by the firmware, so that the firmware will not consume LLDPDU and cause them to be sent up the stack. Alan adds a mechanism for detecting/storing the flag for processing of LLDP packets by the firmware, so that its current state is persistent across reboots/reloads of the driver. Avinash fixes kdump with i40e due to resource constraints. We were enabling VMDq and iWARP when we just have a single CPU, which was starving kdump for the lack of IRQs. Jake adds support to program the fragmented IPv4 input set PCTYPE. Fixed the reported masks to properly report that the entire field is masked, since we had accidentally swapped the mask values for the IPv4 addresses with the L4 port numbers. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next由 David S. Miller 提交于
Alexei Starovoitov says: ==================== pull-request: bpf-next 2018-01-26 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) A number of extensions to tcp-bpf, from Lawrence. - direct R or R/W access to many tcp_sock fields via bpf_sock_ops - passing up to 3 arguments to bpf_sock_ops functions - tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks - optionally calling bpf_sock_ops program when RTO fires - optionally calling bpf_sock_ops program when packet is retransmitted - optionally calling bpf_sock_ops program when TCP state changes - access to tclass and sk_txhash - new selftest 2) div/mod exception handling, from Daniel. One of the ugly leftovers from the early eBPF days is that div/mod operations based on registers have a hard-coded src_reg == 0 test in the interpreter as well as in JIT code generators that would return from the BPF program with exit code 0. This was basically adopted from cBPF interpreter for historical reasons. There are multiple reasons why this is very suboptimal and prone to bugs. To name one: the return code mapping for such abnormal program exit of 0 does not always match with a suitable program type's exit code mapping. For example, '0' in tc means action 'ok' where the packet gets passed further up the stack, which is just undesirable for such cases (e.g. when implementing policy) and also does not match with other program types. After considering _four_ different ways to address the problem, we adapt the same behavior as on some major archs like ARMv8: X div 0 results in 0, and X mod 0 results in X. aarch64 and aarch32 ISA do not generate any traps or otherwise aborts of program execution for unsigned divides. Given the options, it seems the most suitable from all of them, also since major archs have similar schemes in place. Given this is all in the realm of undefined behavior, we still have the option to adapt if deemed necessary. 3) sockmap sample refactoring, from John. 4) lpm map get_next_key fixes, from Yonghong. 5) test cleanups, from Alexei and Prashant. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 1月, 2018 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2018-01-26 This series contains updates to ixgbe and ixgbevf. Emil updates ixgbevf to match ixgbe functionality, starting with the consolidating of functions that represent logical steps in the receive process so we can later update them more easily. Updated ixgbevf to only synchronize the length of the frame, which will typically be the MTU or smaller. Updated the VF driver to use the length of the packet instead of the DD status bit to determine if a new descriptor is ready to be processed, which saves on reads and we can save time on initialization. Added support for DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING to help improve performance on some platforms. Updated the VF driver to do bulk updates of the page reference count instead of just incrementing it by one reference at a time. Updated the VF driver to only go through the region of the receive ring that was designated to be cleaned up, rather than process the entire ring. Colin Ian King adds the use of ARRAY_SIZE() on various arrays. Miroslav Lichvar fixes an issue where ethtool was reporting timestamping filters unsupported for X550, which is incorrect. Paul adds support for reporting 5G link speed for some devices. Dan Carpenter fixes a typo where && was used when it should have been ||. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Leon Romanovsky 提交于
The "return 0" instruction follows other return instruction and it makes it impossible to execute, hence remove it. Fixes: 00fc0c51 ("rocker: Change world_ops API and implementation to be switchdev independant") Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 1月, 2018 35 次提交
-
-
由 Alexei Starovoitov 提交于
Yonghong Song says: ==================== A kernel page fault which happens in lpm map trie_get_next_key is reported by syzbot and Eric. The issue was introduced by commit b471f2f1 ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map"). Patch #1 fixed the issue in the kernel and patch #2 adds a multithreaded test case in tools/testing/selftests/bpf/test_lpm_map. ==================== Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Yonghong Song 提交于
The new test will spawn four threads, doing map update, delete, lookup and get_next_key in parallel. It is able to reproduce the issue in the previous commit found by syzbot and Eric Dumazet. Signed-off-by: NYonghong Song <yhs@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Yonghong Song 提交于
Commit b471f2f1 ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map") introduces a bug likes below: if (!rcu_dereference(trie->root)) return -ENOENT; if (!key || key->prefixlen > trie->max_prefixlen) { root = &trie->root; goto find_leftmost; } ...... find_leftmost: for (node = rcu_dereference(*root); node;) { In the code after label find_leftmost, it is assumed that *root should not be NULL, but it is not true as it is possbile trie->root is changed to NULL by an asynchronous delete operation. The issue is reported by syzbot and Eric Dumazet with the below error log: ...... kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 8033 Comm: syz-executor3 Not tainted 4.15.0-rc8+ #4 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:trie_get_next_key+0x3c2/0xf10 kernel/bpf/lpm_trie.c:682 ...... This patch fixed the issue by use local rcu_dereferenced pointer instead of *(&trie->root) later on. Fixes: b471f2f1 ("bpf: implement MAP_GET_NEXT_KEY command or LPM_TRIE map") Reported-by: Nsyzbot <syzkaller@googlegroups.com> Reported-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NYonghong Song <yhs@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Alexei Starovoitov 提交于
Daniel Borkmann says: ==================== This set contains a small cleanup in cBPF prologue generation and otherwise fixes an outstanding issue related to BPF to BPF calls and exception handling. For details please see related patches. Last but not least, BPF selftests is extended with several new test cases. Thanks! ==================== Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Update selftests to relfect recent changes and add various new test cases. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Since we've changed div/mod exception handling for src_reg in eBPF verifier itself, remove the leftovers from arm32 JIT. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Shubham Bansal <illusionist.neo@gmail.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
The verifier in both cBPF and eBPF reject div/mod by 0 imm, so this can never load. Remove emitting such test and reject it from being JITed instead (the latter is actually also not needed, but given practice in sparc64, ppc64 today, so doesn't hurt to add it here either). Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: David Daney <david.daney@cavium.com> Reviewed-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Since we've changed div/mod exception handling for src_reg in eBPF verifier itself, remove the leftovers from mips64 JIT. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: David Daney <david.daney@cavium.com> Reviewed-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Since we've changed div/mod exception handling for src_reg in eBPF verifier itself, remove the leftovers from sparc64 JIT. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Since we've changed div/mod exception handling for src_reg in eBPF verifier itself, remove the leftovers from ppc64 JIT. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Since we've changed div/mod exception handling for src_reg in eBPF verifier itself, remove the leftovers from s390x JIT. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Since we've changed div/mod exception handling for src_reg in eBPF verifier itself, remove the leftovers from arm64 JIT. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Since we've changed div/mod exception handling for src_reg in eBPF verifier itself, remove the leftovers from x86_64 JIT. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
One of the ugly leftovers from the early eBPF days is that div/mod operations based on registers have a hard-coded src_reg == 0 test in the interpreter as well as in JIT code generators that would return from the BPF program with exit code 0. This was basically adopted from cBPF interpreter for historical reasons. There are multiple reasons why this is very suboptimal and prone to bugs. To name one: the return code mapping for such abnormal program exit of 0 does not always match with a suitable program type's exit code mapping. For example, '0' in tc means action 'ok' where the packet gets passed further up the stack, which is just undesirable for such cases (e.g. when implementing policy) and also does not match with other program types. While trying to work out an exception handling scheme, I also noticed that programs crafted like the following will currently pass the verifier: 0: (bf) r6 = r1 1: (85) call pc+8 caller: R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 callee: frame1: R1=ctx(id=0,off=0,imm=0) R10=fp0,call_1 10: (b4) (u32) r2 = (u32) 0 11: (b4) (u32) r3 = (u32) 1 12: (3c) (u32) r3 /= (u32) r2 13: (61) r0 = *(u32 *)(r1 +76) 14: (95) exit returning from callee: frame1: R0_w=pkt(id=0,off=0,r=0,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=inv0 R3_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0,call_1 to caller at 2: R0_w=pkt(id=0,off=0,r=0,imm=0) R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 from 14 to 2: R0=pkt(id=0,off=0,r=0,imm=0) R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 2: (bf) r1 = r6 3: (61) r1 = *(u32 *)(r1 +80) 4: (bf) r2 = r0 5: (07) r2 += 8 6: (2d) if r2 > r1 goto pc+1 R0=pkt(id=0,off=0,r=8,imm=0) R1=pkt_end(id=0,off=0,imm=0) R2=pkt(id=0,off=8,r=8,imm=0) R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 7: (71) r0 = *(u8 *)(r0 +0) 8: (b7) r0 = 1 9: (95) exit from 6 to 8: safe processed 16 insns (limit 131072), stack depth 0+0 Basically what happens is that in the subprog we make use of a div/mod by 0 exception and in the 'normal' subprog's exit path we just return skb->data back to the main prog. This has the implication that the verifier thinks we always get a pkt pointer in R0 while we still have the implicit 'return 0' from the div as an alternative unconditional return path earlier. Thus, R0 then contains 0, meaning back in the parent prog we get the address range of [0x0, skb->data_end] as read and writeable. Similar can be crafted with other pointer register types. Since i) BPF_ABS/IND is not allowed in programs that contain BPF to BPF calls (and generally it's also disadvised to use in native eBPF context), ii) unknown opcodes don't return zero anymore, iii) we don't return an exception code in dead branches, the only last missing case affected and to fix is the div/mod handling. What we would really need is some infrastructure to propagate exceptions all the way to the original prog unwinding the current stack and returning that code to the caller of the BPF program. In user space such exception handling for similar runtimes is typically implemented with setjmp(3) and longjmp(3) as one possibility which is not available in the kernel, though (kgdb used to implement it in kernel long time ago). I implemented a PoC exception handling mechanism into the BPF interpreter with porting setjmp()/longjmp() into x86_64 and adding a new internal BPF_ABRT opcode that can use a program specific exception code for all exception cases we have (e.g. div/mod by 0, unknown opcodes, etc). While this seems to work in the constrained BPF environment (meaning, here, we don't need to deal with state e.g. from memory allocations that we would need to undo before going into exception state), it still has various drawbacks: i) we would need to implement the setjmp()/longjmp() for every arch supported in the kernel and for x86_64, arm64, sparc64 JITs currently supporting calls, ii) it has unconditional additional cost on main program entry to store CPU register state in initial setjmp() call, and we would need some way to pass the jmp_buf down into ___bpf_prog_run() for main prog and all subprogs, but also storing on stack is not really nice (other option would be per-cpu storage for this, but it also has the drawback that we need to disable preemption for every BPF program types). All in all this approach would add a lot of complexity. Another poor-man's solution would be to have some sort of additional shared register or scratch buffer to hold state for exceptions, and test that after every call return to chain returns and pass R0 all the way down to BPF prog caller. This is also problematic in various ways: i) an additional register doesn't map well into JITs, and some other scratch space could only be on per-cpu storage, which, again has the side-effect that this only works when we disable preemption, or somewhere in the input context which is not available everywhere either, and ii) this adds significant runtime overhead by putting conditionals after each and every call, as well as implementation complexity. Yet another option is to teach verifier that div/mod can return an integer, which however is also complex to implement as verifier would need to walk such fake 'mov r0,<code>; exit;' sequeuence and there would still be no guarantee for having propagation of this further down to the BPF caller as proper exception code. For parent prog, it is also is not distinguishable from a normal return of a constant scalar value. The approach taken here is a completely different one with little complexity and no additional overhead involved in that we make use of the fact that a div/mod by 0 is undefined behavior. Instead of bailing out, we adapt the same behavior as on some major archs like ARMv8 [0] into eBPF as well: X div 0 results in 0, and X mod 0 results in X. aarch64 and aarch32 ISA do not generate any traps or otherwise aborts of program execution for unsigned divides. I verified this also with a test program compiled by gcc and clang, and the behavior matches with the spec. Going forward we adapt the eBPF verifier to emit such rewrites once div/mod by register was seen. cBPF is not touched and will keep existing 'return 0' semantics. Given the options, it seems the most suitable from all of them, also since major archs have similar schemes in place. Given this is all in the realm of undefined behavior, we still have the option to adapt if deemed necessary and this way we would also have the option of more flexibility from LLVM code generation side (which is then fully visible to verifier). Thus, this patch i) fixes the panic seen in above program and ii) doesn't bypass the verifier observations. [0] ARM Architecture Reference Manual, ARMv8 [ARM DDI 0487B.b] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0487b.b/DDI0487B_b_armv8_arm.pdf 1) aarch64 instruction set: section C3.4.7 and C6.2.279 (UDIV) "A division by zero results in a zero being written to the destination register, without any indication that the division by zero occurred." 2) aarch32 instruction set: section F1.4.8 and F5.1.263 (UDIV) "For the SDIV and UDIV instructions, division by zero always returns a zero result." Fixes: f4d7e40a ("bpf: introduce function calls (verification)") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Recent findings by syzcaller fixed in 7891a87e ("bpf: arsh is not supported in 32 bit alu thus reject it") triggered a warning in the interpreter due to unknown opcode not being rejected by the verifier. The 'return 0' for an unknown opcode is really not optimal, since with BPF to BPF calls, this would go untracked by the verifier. Do two things here to improve the situation: i) perform basic insn sanity check early on in the verification phase and reject every non-uapi insn right there. The bpf_opcode_in_insntable() table reuses the same mapping as the jumptable in ___bpf_prog_run() sans the non-public mappings. And ii) in ___bpf_prog_run() we do need to BUG in the case where the verifier would ever create an unknown opcode due to some rewrites. Note that JITs do not have such issues since they would punt to interpreter in these situations. Moreover, the BPF_JIT_ALWAYS_ON would also help to avoid such unknown opcodes in the first place. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Given we recently had c131187d ("bpf: fix branch pruning logic") and 95a762e2 ("bpf: fix incorrect sign extension in check_alu_op()") in particular where before verifier skipped verification of the wrongly assumed dead branch, we should not just replace the dead code parts with nops (mov r0,r0). If there is a bug such as fixed in 95a762e2 in future again, where runtime could execute those insns, then one of the potential issues with the current setting would be that given the nops would be at the end of the program, we could execute out of bounds at some point. The best in such case would be to just exit the BPF program altogether and return an exception code. However, given this would require two instructions, and such a dead code gap could just be a single insn long, we would need to place 'r0 = X; ret' snippet at the very end after the user program or at the start before the program (where we'd skip that region on prog entry), and then place unconditional ja's into the dead code gap. While more complex but possible, there's still another block in the road that currently prevents from this, namely BPF to BPF calls. The issue here is that such exception could be returned from a callee, but the caller would not know that it's an exception that needs to be propagated further down. Alternative that has little complexity is to just use a ja-1 code for now which will trap the execution here instead of silently doing bad things if we ever get there due to bugs. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Very minor optimization; saves 1 byte per program in x86_64 JIT in cBPF prologue. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Mickaël Salaün 提交于
Do not build lib/bpf/bpf.o with this Makefile but use the one from the library directory. This avoid making a buggy bpf.o file (e.g. missing symbols). This patch is useful if some code (e.g. Landlock tests) needs both the bpf.o (from tools/lib/bpf) and the bpf_load.o (from samples/bpf). Signed-off-by: NMickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Lawrence Brakmo 提交于
Removed commented lines from test_tcpbpf_kern.c Fixes: d6d4f60c bpf: add selftest for tcpbpf Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Paweł Jabłoński 提交于
This patch suppresses the message about invalid TC mapping and wrong selected TX queue. The root cause of this bug was setting too many TC queue pairs on huge multiprocessor machines. When quantity of the TC queue pairs is exceeding MSI-X vectors count then TX queue number can be selected beyond actual TX queues amount. Signed-off-by: NPaweł Jabłoński <pawel.jablonski@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
The drivers for i40e and i40evf had a reg_idx value stored in the q_vector that was going completely unused. I can only assume this was copied over from ixgbe and nobody knew how to use it. I'm going to make use of the value to avoid having to compute the vector and thus the register index for multiple paths throughout the drivers. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
In commit 36777d9f ("i40e: check current configured input set when adding ntuple filters") some code was added to report the input set mask for a given filter when reporting it to the user. This code is necessary so that the reported filter correctly displays that it is or is not masking certain fields. Unfortunately the code was incorrect. Development error accidentally swapped the mask values for the IPv4 addresses with the L4 port numbers. The port numbers are only 16bits wide while IPv4 addresses are 32 bits. Unfortunately we assigned only 16 bits to the IPv4 address masks. Additionally we assigned 32bit value 0xFFFFFFF to the TCP port numbers. This second part does not matter as the value would be truncated to 16bits regardless, but it is unnecessary. Fix the reported masks to properly report that the entire field is masked. Fixes: 36777d9f ("i40e: check current configured input set when adding ntuple filters") Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
Our hardware does not allow situations where two filters might conflict when matching. Essentially hardware only programs one filter for each set of matching criteria. We don't support filters with overlapping input sets, because each flow type can only use a single input set. Additionally, different flow types will never have overlapping matches, because of how the hardware parses the flow type before checking matching criteria. For this reason, we do not need or use the location number when programming filters to hardware. In order to avoid confusing scenarios with filters that match the same criteria but program the flow to different queues, do not allow multiple filters that match identical criteria to be programmed. This ensures that we avoid odd scenarios when deleting filters, and when programming new filters that match the same criteria. Instead, users that wish to update the criteria for a filter must use the same location id, or must delete all the matching filters first. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
When implementing support for IP_USER_FLOW filters, we correctly programmed a filter for both the non fragmented IPv4/Other filter, as well as the fragmented IPv4 filters. However, we did not properly program the input set for fragmented IPv4 PCTYPE. This meant that the filters would almost certainly not match, unless the user specified all of the flow types. Add support to program the fragmented IPv4 filter input set. Since we always program these filters together, we'll assume that the two input sets must match, and will thus always program the input sets to the same value. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Avinash Dayanand 提交于
kdump fails in the system when used in conjunction with Ethernet driver X722/X710. This is mainly because when we are resource constrained i.e. when we have just one online_cpus, we are enabling VMDq and iWARP. It doesn't make sense to enable them with just one CPU and starve kdump for lack of IRQs. So don't enable VMDq or iWARP when we just have a single CPU. Signed-off-by: NAvinash Dayanand <avinash.dayanand@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jeff Kirsher 提交于
Clean up unnecessary parenthesis. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
-
由 Alan Brady 提交于
Using ethtool --set-priv-flags disable-fw-lldp <on/off> is persistent across reboots/reloads so we need some mechanism in the driver to detect if it's on or off on init so we can set the ethtool private flag appropriately. Without this, every time the driver is reloaded the flag will default to off regardless of whether it's on or off in FW. We detect this by first attempting to program DCB and if AQ fails returning I40E_AQ_RC_EPERM, we know that LLDP is disabled in FW. Signed-off-by: NAlan Brady <alan.brady@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Dave Ertman 提交于
Implement the private flag disable-fw-lldp for ethtool to disable the processing of LLDP packets by the FW. This will stop the FW from consuming LLDPDU and cause them to be sent up the stack. The FW is also being configured to apply a default DCB configuration on link up. Toggling the value of this flag will also cause a PF reset. Disabling FW DCB will also disable DCBx. Signed-off-by: NDave Ertman <david.m.ertman@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alice Michael 提交于
As we have added more flags, we need to now use more bits and have over flooded the 32 bit size. So make it 64. Also change all the existing bits to unsigned long long bits. Signed-off-by: NAlice Michael <alice.michael@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Upasana Menon 提交于
This patch enables driver to display LLDP information on the vSphere Web Client with Intel adapters (X710, XL710) and Distributed Virtual Switch. Signed-off-by: NUpasana Menon <upasana.menon@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change cleans up the i40e/i40evf_set_itr_per_queue function by dropping all the unneeded pointer chases. Instead we can just pull out the pointers for the Tx and Rx rings and use them throughout the function. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Paweł Jabłoński 提交于
This patch adds back the capability to turn off offloads when VF has VLAN set. The commit 0a3b4f70 ("i40evf: enable support for VF VLAN tag stripping control") adds the i40evf_set_features function and changes the 'turn off' flow for offloads. This patch adds that capability back by moving checking the VLAN option for VF to the next statement. Signed-off-by: NPaweł Jabłoński <pawel.jablonski@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Patryk Małek 提交于
This patch reorders i40e_add_del_fdir and i40e_update_ethtool_fdir_entry calls so that we first remove an already existing filter (inside i40e_update_ethtool_fdir_entry using i40e_add_del_fdir) and then we add a new one with i40e_add_del_fdir. After applying this patch, creating multiple identical filters (with the same location) one after another doesn't revert their behavior but behaves correctly. Signed-off-by: NPatryk Małek <patryk.malek@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Michal Kosiarz 提交于
The FW has the ability to return a critical error on every AQ command. When this critical error occurs then we need to send the correct response to the caller. Signed-off-by: NMichal Kosiarz <michal.kosiarz@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
commit 2de6aa3a ("ixgbe: Add support for padding packet") Uses RXDCTL.RLPML to limit the maximum frame size on Rx when using build_skb. Unfortunately that register does not work on 82599. Added an explicit check to avoid setting this register on 82599 MAC. Extended the comment related to the setting of RXDCTL.RLPML to better explain its purpose. Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-