- 29 7月, 2008 1 次提交
-
-
由 Linus Torvalds 提交于
Clean up and optimize cpumask_of_cpu(), by sharing all the zero words. Instead of stupidly generating all possible i=0...NR_CPUS 2^i patterns creating a huge array of constant bitmasks, realize that the zero words can be shared. In other words, on a 64-bit architecture, we only ever need 64 of these arrays - with a different bit set in one single world (with enough zero words around it so that we can create any bitmask by just offsetting in that big array). And then we just put enough zeroes around it that we can point every single cpumask to be one of those things. So when we have 4k CPU's, instead of having 4k arrays (of 4k bits each, with one bit set in each array - 2MB memory total), we have exactly 64 arrays instead, each 8k bits in size (64kB total). And then we just point cpumask(n) to the right position (which we can calculate dynamically). Once we have the right arrays, getting "cpumask(n)" ends up being: static inline const cpumask_t *get_cpu_mask(unsigned int cpu) { const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG]; p -= cpu / BITS_PER_LONG; return (const cpumask_t *)p; } This brings other advantages and simplifications as well: - we are not wasting memory that is just filled with a single bit in various different places - we don't need all those games to re-create the arrays in some dense format, because they're already going to be dense enough. if we compile a kernel for up to 4k CPU's, "wasting" that 64kB of memory is a non-issue (especially since by doing this "overlapping" trick we probably get better cache behaviour anyway). [ mingo@elte.hu: Converted Linus's mails into a commit. See: http://lkml.org/lkml/2008/7/27/156 http://lkml.org/lkml/2008/7/28/320 Also applied a family filter - which also has the side-effect of leaving out the bits where Linus calls me an idio... Oh, never mind ;-) ] Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Mike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 7月, 2008 1 次提交
-
-
由 Mike Travis 提交于
* Create the cpumask_of_cpu_map statically in the init data section using NR_CPUS but replace it during boot up with one sized by nr_cpu_ids (num possible cpus). Signed-off-by: NMike Travis <travis@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 7月, 2008 1 次提交
-
-
由 Thomas Gleixner 提交于
There are a couple of places where (P)Dprintk is used which is an old compile time enabled printk wrapper. Convert it to the generic pr_debug(). Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 14 7月, 2008 1 次提交
-
-
由 Mike Travis 提交于
* Strengthen the return type for the _node_to_cpumask_ptr to be a const pointer. This adds compiler checking to insure that node_to_cpumask_map[] is not changed inadvertently. Signed-off-by: NMike Travis <travis@sgi.com> Cc: "akpm@linux-foundation.org" <akpm@linux-foundation.org> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Acked-by: NVegard Nossum <vegard.nossum@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 7月, 2008 21 次提交
-
-
由 Yinghai Lu 提交于
call it right after we are done with MADT/mptable handling, instead of doing that in setup_per_cpu_areas() later on... this way for_possible_cpu() can be used early. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
* When CONFIG_DEBUG_PER_CPU_MAPS is set, the node passed to node_to_cpumask and node_to_cpumask_ptr should be validated. If invalid, then a dump_stack is performed and a zero cpumask is returned. v2: Slightly different version to remove a compiler warning. v3: Redone to reflect moving setup.c -> setup_percpu.c Signed-off-by: NMike Travis <travis@sgi.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: "akpm@linux-foundation.org" <akpm@linux-foundation.org> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
some functions need to be moved to setup_numa.c after we merge setup32/64.c, some funcs need to be moved back to setup.c Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
if acpi=off, acpi=noirq and pci=noacpi, we need to disable apic. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Bernhard Walle 提交于
This patch moves the reserve_crashkernel() to setup.c and removes the architecture-specific version. Both versions were more or less the same. I tested it on both x86-64 and i386, with CONFIG_KEXEC on and off (so that it compiles). Signed-off-by: NBernhard Walle <bwalle@suse.de> Cc: yhlu.kernel@gmail.com Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Randy Dunlap 提交于
Fix setup.c printk format warning: linux-next-20080605/arch/x86/kernel/setup.c: In function 'setup_per_cpu_areas': linux-next-20080605/arch/x86/kernel/setup.c:173: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ssize_t' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Vegard Nossum 提交于
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
* Remove the boot_cpu_pda array and pointer table from the data section. Allocate the pointer table and array during init. do_boot_cpu() will reallocate the pda in node local memory and if the cpu is being brought up before the bootmem array is released (after_bootmem = 0), then it will free the initial pda. This will happen for all cpus present at system startup. This removes 512k + 32k bytes from the data section. For inclusion into sched-devel/latest tree. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + sched-devel/latest .../mingo/linux-2.6-sched-devel.git Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Mike Travis 提交于
* Consolidate node_to_cpumask operations and remove the 256k byte node_to_cpumask_map. This is done by allocating the node_to_cpumask_map array after the number of possible nodes (nr_node_ids) is known. * Debug printouts when CONFIG_DEBUG_PER_CPU_MAPS is active have been increased. It now shows faults when calling node_to_cpumask() and node_to_cpumask_ptr(). For inclusion into sched-devel/latest tree. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + sched-devel/latest .../mingo/linux-2.6-sched-devel.git Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Mike Travis 提交于
* Restore the nodenumber field in the x86_64 pda. This field is slightly different than the x86_cpu_to_node_map mainly because it's a static indication of which node the cpu is on while the cpu to node map is a dyanamic mapping that may get reset if the cpu goes offline. This also simplifies the numa_node_id() macro. For inclusion into sched-devel/latest tree. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + sched-devel/latest .../mingo/linux-2.6-sched-devel.git Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Mike Travis 提交于
* Introduce a new PER_CPU macro called "EARLY_PER_CPU". This is used by some per_cpu variables that are initialized and accessed before there are per_cpu areas allocated. ["Early" in respect to per_cpu variables is "earlier than the per_cpu areas have been setup".] This patchset adds these new macros: DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) EXPORT_EARLY_PER_CPU_SYMBOL(_name) DECLARE_EARLY_PER_CPU(_type, _name) early_per_cpu_ptr(_name) early_per_cpu_map(_name, _idx) early_per_cpu(_name, _cpu) The DEFINE macro defines the per_cpu variable as well as the early map and pointer. It also initializes the per_cpu variable and map elements to "_initvalue". The early_* macros provide access to the initial map (usually setup during system init) and the early pointer. This pointer is initialized to point to the early map but is then NULL'ed when the actual per_cpu areas are setup. After that the per_cpu variable is the correct access to the variable. The early_per_cpu() macro is not very efficient but does show how to access the variable if you have a function that can be called both "early" and "late". It tests the early ptr to be NULL, and if not then it's still valid. Otherwise, the per_cpu variable is used instead: #define early_per_cpu(_name, _cpu) \ (early_per_cpu_ptr(_name) ? \ early_per_cpu_ptr(_name)[_cpu] : \ per_cpu(_name, _cpu)) A better method is to actually check the pointer manually. In the case below, numa_set_node can be called both "early" and "late": void __cpuinit numa_set_node(int cpu, int node) { int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); if (cpu_to_node_map) cpu_to_node_map[cpu] = node; else per_cpu(x86_cpu_to_node_map, cpu) = node; } * Add a flag "arch_provides_topology_pointers" that indicates pointers to topology cpumask_t maps are available. Otherwise, use the function returning the cpumask_t value. This is useful if cpumask_t set size is very large to avoid copying data on to/off of the stack. * The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while the non-debug case has been optimized a bit. * Remove an unreferenced compiler warning in drivers/base/topology.c * Clean up #ifdef in setup.c For inclusion into sched-devel/latest tree. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + sched-devel/latest .../mingo/linux-2.6-sched-devel.git Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Huang, Ying 提交于
Because of the size limits of struct boot_params (zero page), the maximum number of E820 memory map entries can be passed to kernel is 128. As pointed by Paul Jackson, there is some machine produced by SGI with so many nodes that the number of E820 memory map entries is more than 128. To enabling Linux kernel on these system, a new setup data type named SETUP_E820_EXT is defined to pass additional memory map entries to Linux kernel. This patch is based on x86/auto-latest branch of git-x86 tree and has been tested on x86_64 and i386 platform. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Robert Richter 提交于
"Form follows function". Code is now where it belongs to. Signed-off-by: NRobert Richter <robert.richter@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 6月, 2008 2 次提交
-
-
由 Robert Richter 提交于
Also much less code now. Signed-off-by: NRobert Richter <robert.richter@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
a multi-socket test-system with 3 or 4 ioapics, when 4 dualcore cpus or 2 quadcore cpus installed, needs to switch to bigsmp or physflat. CPU apic id is [4,11] instead of [0,7], and we need to check max apic id instead of cpu numbers. also add check for 32 bit when acpi is not compiled in or acpi=off. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 05 6月, 2008 1 次提交
-
-
由 Huang, Ying 提交于
This patch adds linked list of struct setup_data supported for i386. Signed-off-by: NHuang Ying <ying.huang@intel.com> Cc: andi@firstfloor.org Cc: mingo@redhat.com Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 02 6月, 2008 1 次提交
-
-
由 Robert Richter 提交于
This patch implements PCI extended configuration space access for AMD's Barcelona CPUs. It extends the method using CF8/CFC IO addresses. An x86 capability bit has been introduced that is set for CPUs supporting PCI extended config space accesses. Signed-off-by: NRobert Richter <robert.richter@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 5月, 2008 1 次提交
-
-
由 James Bottomley 提交于
The phys_cpu_present_map is an expected symbol in the SMP harness. Unfortunately, x86 recently moved this and a few others to kernel/setup.c where it doesn't quite work because voyager has to define its own. Use CONFIG_X86_LOCAL_APIC to isolate these definitions and fix up another area in setup.c where CONFIG_X86_SMP should be used instead of CONFIG_SMP. Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: toralf.foerster@gmx.de Cc: Mike Travis <travis@sgi.com> Cc: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 11 5月, 2008 1 次提交
-
-
由 Thomas Gleixner 提交于
commit 62179849 x86: fix setup printk format warning is for linux-next and not for .26 Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 05 5月, 2008 1 次提交
-
-
由 Randy Dunlap 提交于
Fix x86 setup printk format warming: next-20080430/arch/x86/kernel/setup.c:172: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ssize_t' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: mingo@elte.hu Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 4月, 2008 1 次提交
-
-
由 Alexey Starikovskiy 提交于
Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 4月, 2008 1 次提交
-
-
由 Mike Travis 提交于
* Here is a simple patch to use an allocated array of cpumasks to represent cpumask_of_cpu() instead of constructing one on the stack. It's based on the Kconfig option "HAVE_CPUMASK_OF_CPU_MAP" which is currently only set for x86_64 SMP. Otherwise the the existing cpumask_of_cpu() is used but has been changed to produce an lvalue so a pointer to it can be used. Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 4月, 2008 5 次提交
-
-
由 Alexey Starikovskiy 提交于
Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexey Starikovskiy 提交于
Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexey Starikovskiy 提交于
Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Travis 提交于
Cleanup references to the early cpu maps for the non-SMP configuration and remove some functions called for SMP configurations only. Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
We use the same routing as x86_64, moved now to setup.c. Just with a few ifdefs inside. Note that this routing uses prefill_possible_map(). It has the very nice side effect of allowing hotplugging of cpus that are marked as present but disabled by acpi bios. Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-