- 08 6月, 2011 1 次提交
-
-
由 J Freyensee 提交于
This patch tidies up the documentation for pti_tty_install() function. Signed-off-by: NJ Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 6月, 2011 5 次提交
-
-
由 Linus Torvalds 提交于
-
由 Hugh Dickins 提交于
Al Viro observes that in the hugetlb case, handle_mm_fault() may return a value of the kind ENOSPC when its caller is expecting a value of the kind VM_FAULT_SIGBUS: fix alloc_huge_page()'s failure returns. Signed-off-by: NHugh Dickins <hughd@google.com> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: usb - turn off de-emphasis in s/pdif for cm6206 ALSA: asihpi: Use angle brackets for system includes ALSA: fm801: add error handling if auto-detect fails ALSA: hda - Check pin support EAPD in ad198x_power_eapd_write ALSA: hda - Fix HP and Front pins of ad1988/ad1989 in ad198x_power_eapd() ALSA: 6fire: Don't leak firmware in error path ASoC: Fix wm_hubs input PGA ZC bits ASoC: Fix dapm_is_shared_kcontrol so everything isn't shared
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (max6642): Better chip detection schema hwmon: (coretemp) Further relax temperature range checks hwmon: (coretemp) Fix TjMax detection for older CPUs hwmon: (coretemp) Relax target temperature range check hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_fault
-
由 Takashi Iwai 提交于
-
- 05 6月, 2011 4 次提交
-
-
git://android.git.kernel.org/kernel/tegra由 Linus Torvalds 提交于
* 'for-linus' of git://android.git.kernel.org/kernel/tegra: ARM: Tegra: Harmony: Fix conflicting GPIO numbering
-
由 Stephen Warren 提交于
Currently, both the WM8903 and TPS6586x chips attempt to register with gpiolib using the same GPIO numbers. This causes the audio driver to fail to initialize. To solve this, add a define to board-harmony.h for the TPS6586x, and make board-harmony-power.c use this define, instead of directly referencing TEGRA_NR_GPIOS. This fixes a regression introduced by commit 6f168f2f. ARM: tegra: harmony: initialize the TPS65862 PMIC Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NColin Cross <ccross@android.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits) btrfs: fix uninitialized variable warning btrfs: add helper for fs_info->closing Btrfs: add mount -o inode_cache btrfs: scrub: add explicit plugging btrfs: use btrfs_ino to access inode number Btrfs: don't save the inode cache if we are deleting this root btrfs: false BUG_ON when degraded Btrfs: don't save the inode cache in non-FS roots Btrfs: make sure we don't overflow the free space cache crc page Btrfs: fix uninit variable in the delayed inode code btrfs: scrub: don't reuse bios and pages Btrfs: leave spinning on lookup and map the leaf Btrfs: check for duplicate entries in the free space cache Btrfs: don't try to allocate from a block group that doesn't have enough space Btrfs: don't always do readahead Btrfs: try not to sleep as much when doing slow caching Btrfs: kill BTRFS_I(inode)->block_group Btrfs: don't look at the extent buffer level 3 times in a row Btrfs: map the node block when looking for readahead targets Btrfs: set range_start to the right start in count_range_bits ...
-
由 Per Dalén 提交于
Improve detection of MAX6642 by reading non existing registers (0x04, 0x06 and 0xff). Reading those registers returns the previously read value. Signed-off-by: NPer Dalen <per.dalen@appeartv.com> [guenter.roeck@ericsson.com: added second set of register reads] Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
- 04 6月, 2011 24 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Fix oops caused by queue refcounting failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits) tg3: Fix tg3_skb_error_unmap() net: tracepoint of net_dev_xmit sees freed skb and causes panic drivers/net/can/flexcan.c: add missing clk_put net: dm9000: Get the chip in a known good state before enabling interrupts drivers/net/davinci_emac.c: add missing clk_put af-packet: Add flag to distinguish VID 0 from no-vlan. caif: Fix race when conditionally taking rtnl lock usbnet/cdc_ncm: add missing .reset_resume hook vlan: fix typo in vlan_dev_hard_start_xmit() net/ipv4: Check for mistakenly passed in non-IPv4 address iwl4965: correctly validate temperature value bluetooth l2cap: fix locking in l2cap_global_chan_by_psm ath9k: fix two more bugs in tx power cfg80211: don't drop p2p probe responses Revert "net: fix section mismatches" drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run() sctp: stop pending timers and purge queues when peer restart asoc drivers/net: ks8842 Fix crash on received packet when in PIO mode. ip_options_compile: properly handle unaligned pointer iwlagn: fix incorrect PCI subsystem id for 6150 devices ...
-
由 David Sterba 提交于
With Linus' tree, today's linux-next build (powercp ppc64_defconfig) produced this warning: fs/btrfs/delayed-inode.c: In function 'btrfs_delayed_update_inode': fs/btrfs/delayed-inode.c:1598:6: warning: 'ret' may be used uninitialized in this function Introduced by commit 16cdcec7 ("btrfs: implement delayed inode items operation"). This fixes a bug in btrfs_update_inode(): if the returned value from btrfs_delayed_update_inode is a nonzero garbage, inode stat data are not updated and several call paths may hit a BUG_ON or fail with strange code. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
由 David Sterba 提交于
wrap checking of filesystem 'closing' flag and fix a few missing memory barriers. Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
由 Chris Mason 提交于
This makes the inode map cache default to off until we fix the overflow problem when the free space crcs don't fit inside a single page. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Arne Jansen 提交于
With the removal of the implicit plugging scrub ends up doing more and smaller I/O than necessary. This patch adds explicit plugging per chunk. Signed-off-by: NArne Jansen <sensille@gmx.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 David Sterba 提交于
commit 4cb5300b ("Btrfs: add mount -o auto_defrag") accesses inode number directly while it should use the helper with the new inode number allocator. Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
With xfstest 254 I can panic the box every time with the inode number caching stuff on. This is because we clean the inodes out when we delete the subvolume, but then we write out the inode cache which adds an inode to the subvolume inode tree, and then when it gets evicted again the root gets added back on the dead roots list and is deleted again, so we have a double free. To stop this from happening just return 0 if refs is 0 (and we're not the tree root since tree root always has refs of 0). With this fix 254 no longer panics. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Tested-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Arne Jansen 提交于
In degraded mode the struct btrfs_device of missing devs don't have device->name set. A kstrdup of NULL correctly returns NULL. Don't BUG in this case. Signed-off-by: NArne Jansen <sensille@gmx.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 liubo 提交于
This adds extra checks to make sure the inode map we are caching really belongs to a FS root instead of a special relocation tree. It prevents crashes during balancing operations. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
The free space cache uses only one page for crcs right now, which means we can't have a cache file bigger than the crcs we can fit in the first page. This adds a check to enforce that restriction. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
The nitems counter needs to start at zero Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Arne Jansen 提交于
The current scrub implementation reuses bios and pages as often as possible, allocating them only on start and releasing them when finished. This leads to more problems with the block layer than it's worth. The elevator gets confused when there are more pages added to the bio than bi_size suggests. This patch completely rips out the reuse of bios and pages and allocates them freshly for each submit. Signed-off-by: NArne Jansen <sensille@gmx.net> Signed-off-by: NChris Maosn <chris.mason@oracle.com>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-block: block: Use hlist_entry() for io_context.cic_list.first cfq-iosched: Remove bogus check in queue_fail path xen/blkback: potential null dereference in error handling xen/blkback: don't call vbd_size() if bd_disk is NULL block: blkdev_get() should access ->bd_disk only after success CFQ: Fix typo and remove unnecessary semicolon block: remove unwanted semicolons Revert "block: Remove extra discard_alignment from hd_struct." nbd: adjust 'max_part' according to part_shift nbd: limit module parameters to a sane value nbd: pass MSG_* flags to kernel_recvmsg() block: improve the bio_add_page() and bio_add_pc_page() descriptions
-
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: strncpy: fix handling of zero lengths
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: asm-generic/unistd.h: support sendmmsg syscall tile: enable CONFIG_BUGVERBOSE
-
git://git.infradead.org/ubifs-2.6由 Linus Torvalds 提交于
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix-up free space earlier UBIFS: intialize LPT earlier UBIFS: assert no fixup when writing a node UBIFS: fix clean znode counter corruption in error cases UBIFS: fix memory leak on error path UBIFS: fix shrinker object count reports UBIFS: fix recovery broken by the previous recovery fix UBIFS: amend ubifs_recover_leb interface UBIFS: introduce a "grouped" journal head flag UBIFS: supress false error messages
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest: ktest: Ignore unset values of the minconfig in config_bisect ktest: Fix result of rebooting the kernel ktest: Fix off-by-one in config bisect result
-
由 Linus Torvalds 提交于
Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: add DMAC clock definitions on SH7372 ARM: arch-shmobile: support SDHI card detection on mackerel, using a GPIO sh_mobile_meram: MERAM platform data for LCDC
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: dmaengine: shdma: fix a regression: initialise DMA channels for memcpy dmaengine: shdma: Fix up fallout from runtime PM changes. Revert "clocksource: sh_cmt: Runtime PM support" Revert "clocksource: sh_tmu: Runtime PM support" sh: Fix up asm-generic/ptrace.h fallout. sh64: Move from P1SEG to CAC_ADDR for consistent sync. sh64: asm/pgtable.h needs asm/mmu.h sh: asm/tlb.h needs linux/swap.h sh: mark DMA slave ID 0 as invalid sh: Update shmin to reflect PIO dependency. sh: arch/sh/kernel/process_32.c needs linux/prefetch.h. sh: add MMCIF runtime PM support on ecovec sh: switch ap325rxa to dynamically manage the platform camera
-
由 Linus Torvalds 提交于
This reverts commit ed0bd233. Since we reverted the TTY API change, we should revert the ASoC update to it too. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This reverts commit b1c43f82. It was broken in so many ways, and results in random odd pty issues. It re-introduced the buggy schedule_work() in flush_to_ldisc() that can cause endless work-loops (see commit a5660b41: "tty: fix endless work loop when the buffer fills up"). It also used an "unsigned int" return value fo the ->receive_buf() function, but then made multiple functions return a negative error code, and didn't actually check for the error in the caller. And it didn't actually work at all. BenH bisected down odd tty behavior to it: "It looks like the patch is causing some major malfunctions of the X server for me, possibly related to PTYs. For example, cat'ing a large file in a gnome terminal hangs the kernel for -minutes- in a loop of what looks like flush_to_ldisc/workqueue code, (some ftrace data in the quoted bits further down). ... Some more data: It -looks- like what happens is that the flush_to_ldisc work queue entry constantly re-queues itself (because the PTY is full ?) and the workqueue thread will basically loop forver calling it without ever scheduling, thus starving the consumer process that could have emptied the PTY." which is pretty much exactly the problem we fixed in a5660b41. Milton Miller pointed out the 'unsigned int' issue. Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: NMilton Miller <miltonm@bga.com> Cc: Stefan Bigler <stefan.bigler@keymile.com> Cc: Toby Gray <toby.gray@realvnc.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem
-
由 Eric Lammerts 提交于
CM6206: Turn off de-emphasis channel status bit in S/PDIF output. Signed-off-by: NEric Lammerts <eric@lammerts.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 6月, 2011 6 次提交
-
-
由 Ben Gardiner 提交于
The free space fixup is currently initiated during mount after the call to ubifs_write_master() which results in a write to PEBs; this has been observed with the patch 'assert no fixup when writing a node' applied: Move the free space fixup on mount to before the calls to ubifs_recover_inl_heads() and ubifs_write_master(). This results in no assertions with the previously mentioned patch applied. Artem: tweaked the patch a bit Signed-off-by: NBen Gardiner <bengardiner@nanometrics> Reviewed-by: NMatthew L. Creech <mlcreech@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Ben Gardiner 提交于
The current 'mount_ubifs()' implementation does not initialize the LPT until the the master node is marked dirty. Move the LPT initialization to before marking the master node dirty. This is a preparation for the next patch which will move the free-space-fixup check to before marking the master node dirty, because we have to fix-up the free space before doing any writes. Artem: massaged the patch and commit message. Signed-off-by: NBen Gardiner <bengardiner@nanometrics.ca> Reviewed-by: NMatthew L. Creech <mlcreech@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Ben Gardiner 提交于
The current free space fixup can result in some writing to the UBI volume when the space_fixup flag is set. To catch instances where UBIFS is writing to the NAND while the space_fixup flag is set, add an assert to ubifs_write_node(). Artem: tweaked the patch, added similar assertion to the write buffer write path. Signed-off-by: NBen Gardiner <bengardiner@nanometrics.ca> Reviewed-by: NMatthew L. Creech <mlcreech@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
UBIFS maintains per-filesystem and global clean znode counters ('c->clean_zn_cnt' and 'ubifs_clean_zn_cnt'). It is important to maintain correct values there since the shrinker relies on 'ubifs_clean_zn_cnt'. However, in case of failures during commit the counters were corrupted. E.g., if a failure happens in the middle of 'write_index()', then some nodes in the commit list ('c->cnext') are marked as clean, and some are marked as dirty. And the 'ubifs_destroy_tnc_subtree()' frees does not retrun correct count, and we end up with non-zero 'c->clean_zn_cnt' when unmounting. This means that if we have 2 file-sytem and one of them fails, and we unmount it, 'ubifs_clean_zn_cnt' stays incorrect and confuses the shrinker. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
UBIFS leaks memory on error path in 'ubifs_jnl_update()' in case of write failure because it forgets to free the 'struct ubifs_dent_node *dent' object. Although the object is small, the alignment can make it large - e.g., 2KiB if the min. I/O unit is 2KiB. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org
-
由 Artem Bityutskiy 提交于
Sometimes VM asks the shrinker to return amount of objects it can shrink, and we return the ubifs_clean_zn_cnt in that case. However, it is possible that this counter is negative for a short period of time, due to the way UBIFS TNC code updates it. And I can observe the following warnings sometimes: shrink_slab: ubifs_shrinker+0x0/0x2b7 [ubifs] negative objects to delete nr=-8541616642706119788 This patch makes sure UBIFS never returns negative count of objects. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org
-