- 24 8月, 2017 11 次提交
-
-
由 Jiri Pirko 提交于
Add helpers to find out if a gact instance is goto_chain termination action and to get chain index. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Reflect chain index coming down from TC core and create a ruleset per chain. Note that only chain 0, being the implicit chain, is bound to the device for processing. The rest of chains have to be "jumped-to" by actions. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Antoine Tenart says: ==================== net: mvpp2: software TSO support This series adds the s/w TSO support in the PPv2 driver, in addition to two cosmetic commits. As stated in patch 3/3: Using iperf and 10G ports, using TSO shows a significant performance improvement by a factor 2 to reach around 9.5Gbps in TX; as well as a significant CPU usage drop (from 25% to 15%). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Ténart 提交于
The patch uses the tso API to implement the tso functionality in Marvell PPv2 driver. Using iperf and 10G ports, using TSO shows a significant performance improvement by a factor 2 to reach around 9.5Gbps in TX; as well as a significant CPU usage drop (from 25% to 15%). Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Ténart 提交于
The txq size is defined by MVPP2_AGGR_TXQ_SIZE, which is sometime not used directly but through variables. As it is a fixed value use the define everywhere in the driver. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Ténart 提交于
The TSO header size was defined in many drivers. Factorize the code and define its size in net/tso.h. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Now when ipv4 route inserts a fib_info, it memcmp fib_metrics. It means ipv4 route identifies one route also with metrics. But when removing a route, it tries to find the route without caring about the metrics. It will cause that the route with right metrics can't be removed. Thomas noticed this issue when doing the testing: 1. add: # ip route append 192.168.7.0/24 dev v window 1000 # ip route append 192.168.7.0/24 dev v window 1001 # ip route append 192.168.7.0/24 dev v window 1002 # ip route append 192.168.7.0/24 dev v window 1003 2. delete: # ip route delete 192.168.7.0/24 dev v window 1002 3. show: 192.168.7.0/24 proto boot scope link window 1001 192.168.7.0/24 proto boot scope link window 1002 192.168.7.0/24 proto boot scope link window 1003 The one with window 1002 wasn't deleted but the first one was. This patch is to do metrics match when looking up and deleting one route. Reported-by: NThomas Haller <thaller@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Mike Maloney says: ==================== net: Add software rx timestamp for TCP. Add software rx timestamps for TCP, and a test to ensure consistency of behavior between IP, UDP, and TCP implementation. Changes since v1: -Initialize tss->ts[1] to 0 if caller requested any timestamps. -Fix test case to validate that tss->ts[1] is zero. -Fix tests to actually use a raw socket. -Fix --tcp flag to work on the test. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Maloney 提交于
Validate the behavior of the combination of various timestamp socket options, and ensure consistency across ip, udp, and tcp. Signed-off-by: NMike Maloney <maloney@google.com> Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Maloney 提交于
When SOF_TIMESTAMPING_RX_SOFTWARE is enabled for tcp sockets, return the timestamp corresponding to the highest sequence number data returned. Previously the skb->tstamp is overwritten when a TCP packet is placed in the out of order queue. While the packet is in the ooo queue, save the timestamp in the TCB_SKB_CB. This space is shared with the gso_* options which are only used on the tx path, and a previously unused 4 byte hole. When skbs are coalesced either in the sk_receive_queue or the out_of_order_queue always choose the timestamp of the appended skb to maintain the invariant of returning the timestamp of the last byte in the recvmsg buffer. Signed-off-by: NMike Maloney <maloney@google.com> Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Felix Manlunas 提交于
In the NIC firmware, the 1-bit flag indicating "firmware is loaded" moved from SLI_SCRATCH_1 to SLI_SCRATCH_2 (these are Octeon general-purpose scratch registers). Make the PF driver conform to this change. Remove code that sets the "firmware is loaded" flag because it's now the firmware's job to do that. In the code that detects whether or not the firmware is loaded, don't just rely on checking the "firmware is loaded" flag because that may cause a rare false negative. Add code that deduces whether or not the firmware is loaded; that will never give a false negative. Also bump up driver version to match newer NIC firmware. Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com> Signed-off-by: NDerek Chickles <derek.chickles@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 8月, 2017 29 次提交
-
-
由 William Tu 提交于
Fix typo: pnet_tap_faied. Signed-off-by: NWilliam Tu <u9012063@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Daniel Borkmann says: ==================== Two minor BPF cleanups Two minor cleanups on devmap and redirect I still had in my queue. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Some minor code cleanups, while going over it I also noticed that we're accounting the bitmap only for one CPU currently, so fix that up as well. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Few cleanups including: bpf_redirect_map() is really XDP only due to the return code. Move it to a more appropriate location where we do the XDP redirect handling and change it's name into bpf_xdp_redirect_map() to make it consistent to the bpf_xdp_redirect() helper. xdp_do_redirect_map() helper can be static since only used out of filter.c file. Drop the goto in xdp_do_generic_redirect() and only return errors directly. In xdp_do_flush_map() only clear ri->map_to_flush which is the arg we're using in that function, ri->map is cleared earlier along with ri->ifindex. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Currently, iproute2's BPF ELF loader works fine with array of maps when retrieving the fd from a pinned node and doing a selfcheck against the provided map attributes from the object file, but we fail to do the same for hash of maps and thus refuse to get the map from pinned node. Reason is that when allocating hash of maps, fd_htab_map_alloc() will set the value size to sizeof(void *), and any user space map creation requests are forced to set 4 bytes as value size. Thus, selfcheck will complain about exposed 8 bytes on 64 bit archs vs. 4 bytes from object file as value size. Contract is that fdinfo or BPF_MAP_GET_FD_BY_ID returns the value size used to create the map. Fix it by handling it the same way as we do for array of maps, which means that we leave value size at 4 bytes and in the allocation phase round up value size to 8 bytes. alloc_htab_elem() needs an adjustment in order to copy rounded up 8 bytes due to bpf_fd_htab_map_update_elem() calling into htab_map_update_elem() with the pointer of the map pointer as value. Unlike array of maps where we just xchg(), we're using the generic htab_map_update_elem() callback also used from helper calls, which published the key/value already on return, so we need to ensure to memcpy() the right size. Fixes: bcc6b1b7 ("bpf: Add hash of maps support") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
There is a missing break causing a fall-through and setting ctx.use_bbit_insns to the wrong value. Fix this by adding the missing break. Detected with cppcheck: "Variable 'ctx.use_bbit_insns' is reassigned a value before the old one has been used. 'break;' missing?" Fixes: 8d8d18c3 ("MIPS,bpf: Fix using smp_processor_id() in preemptible splat.") Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NDavid Daney <david.daney@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
High order GFP_KERNEL allocations can stress the host badly. Use modern kvmalloc_array()/kvfree() instead of custom allocations. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arvind Yadav 提交于
zorro_device_id are not supposed to change at runtime. All functions working with zorro_device_id provided by <linux/zorro.h> work with const zorro_device_id. So mark the non-const structs as const. Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Antoine Tenart says: ==================== net: mvpp2: MAC/GoP configuration This is based on net-next (e2a7c34f). I removed the GoP interrupt and PHY optional parts in this v2 to ease the review process as the MAC/GoP initialization seemed to start less discussions :) This series now only aims at making the PPv2 driver less depending on the firmware/bootloader initialization. Some patches cleanup some parts as well, and add new interface descriptions in the dt. The current implementation of the PPv2 driver relies on the firmware/bootloader initialization to configure some parts, as the Group of Ports (GoP) and the MACs (GMAC and/or XLG MAC --for 10G--). The drawback is the kernel must be configured to match exactly what the bootloader configures which is not convenient and is an issue when using boards having an Ethernet port and an SFP port wired to the same GoP port, as no dynamic configuration can be done. This series adds the GoP and GMAC/XLG MAC initializations so that the PPV2 does not have to rely on a previous initialization. One part is still missing from this series, and that would be the 'comphy' which provides shared serdes PHYs and which must be configured as well for a full kernel initialization to work. This comphy support will be part of a following up series. (This series was also tested with this 'comphy' support, as it's nearly ready). @Dave: patches 9 and 10 should go through the mvebu tree. Thanks! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Ténart 提交于
This patch documents the new marvell,system-controller property used by the Marvell ppv2 network driver. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Tested-by: NMarcin Wojtas <mw@semihalf.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Ténart 提交于
The patch adds GoP (group of ports) initialization functions. The mvpp2 driver was relying on the firmware/bootloader initialization; this patch moves this setup to the mvpp2 driver. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Tested-by: NMarcin Wojtas <mw@semihalf.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Chulski 提交于
Set maximum packet size for XLG 10G ports. Missing maximum packet size for XLG configuration will cause kernel panic if oversized packet is received by port. Signed-off-by: NStefan Chulski <stefanc@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Ténart 提交于
This adds a routine to initialize the XLG MAC at the port level when using a port and the XAUI/10GKR interface mode. This wasn't done until this commit, and the mvpp2 driver was relying on the bootloader/firmware initialization. This doesn't mean everything is configured in the mvpp2 driver now, but it helps reducing the gap. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Tested-by: NMarcin Wojtas <mw@semihalf.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Ténart 提交于
This adds a routine to initialize the GMAC at the port level when using a port. This wasn't done until this commit, and the mvpp2 driver was relying on the bootloader/firmware initialization. This doesn't mean everything is configured in the mvpp2 driver now, but it helps reducing the gap. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Tested-by: NMarcin Wojtas <mw@semihalf.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Ténart 提交于
This moves the mii configuration in the ndo_open path, to allow handling different mii configurations later and to switch between these configurations at runtime. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Tested-by: NMarcin Wojtas <mw@semihalf.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Ténart 提交于
The macro defining the bit to toggle to bypass or not the synchronization module is wrongly named. Writing 1 will disable bypass. This patch s/MVPP22_CTRL4_SYNC_BYPASS/MVPP22_CTRL4_SYNC_BYPASS_DIS/. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Tested-by: NMarcin Wojtas <mw@semihalf.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Ténart 提交于
Cosmetic patch to use the same formatting rules on all register definitions. Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com> Tested-by: NMarcin Wojtas <mw@semihalf.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 William Tu 提交于
The patch adds ERSPAN type II tunnel support. The implementation is based on the draft at [1]. One of the purposes is for Linux box to be able to receive ERSPAN monitoring traffic sent from the Cisco switch, by creating a ERSPAN tunnel device. In addition, the patch also adds ERSPAN TX, so Linux virtual switch can redirect monitored traffic to the ERSPAN tunnel device. The traffic will be encapsulated into ERSPAN and sent out. The implementation reuses tunnel key as ERSPAN session ID, and field 'erspan' as ERSPAN Index fields: ./ip link add dev ers11 type erspan seq key 100 erspan 123 \ local 172.16.1.200 remote 172.16.1.100 To use the above device as ERSPAN receiver, configure Nexus 5000 switch as below: monitor session 100 type erspan-source erspan-id 123 vrf default destination ip 172.16.1.200 source interface Ethernet1/11 both source interface Ethernet1/12 both no shut monitor erspan origin ip-address 172.16.1.100 global [1] https://tools.ietf.org/html/draft-foschiano-erspan-01 [2] iproute2 patch: http://marc.info/?l=linux-netdev&m=150306086924951&w=2 [3] test script: http://marc.info/?l=linux-netdev&m=150231021807304&w=2Signed-off-by: NWilliam Tu <u9012063@gmail.com> Signed-off-by: NMeenakshi Vohra <mvohra@vmware.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Remove two references to ufo in the udp send path that are no longer reachable now that ufo has been removed. Commit 85f1bd9a ("udp: consistently apply ufo or fragmentation") is a fix to ufo. It is safe to revert what remains of it. Also, no skb can enter ip_append_page with skb_is_gso true now that skb_shinfo(skb)->gso_type is no longer set in ip_append_page/_data. Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bhumika Goyal 提交于
Make this const as it is only stored in a const field of a mdiobb_ctrl structure. Signed-off-by: NBhumika Goyal <bhumirks@gmail.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bhumika Goyal 提交于
Make this const as it is only stored in a const field of a mdiobb_ctrl structure. Signed-off-by: NBhumika Goyal <bhumirks@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bhumika Goyal 提交于
Make this const as it is only stored in a const field of a mdiobb_ctrl structure. Signed-off-by: NBhumika Goyal <bhumirks@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Tonghao Zhang says: ==================== tcp: Simplify the tcp_conn_request. Just simplify the tcp_conn_request function. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tonghao Zhang 提交于
Signed-off-by: NTonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tonghao Zhang 提交于
tcp_peer_is_proven needs a proper route to make the determination, but dst always is NULL. This bug may be there at the beginning of git tree. This does not look serious enough to deserve backports to stable versions. Signed-off-by: NTonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Haiyang Zhang says: ==================== hv_netvsc: Ethtool handler to change UDP hash levels The patch set adds the functions to switch UDP hash level between L3 and L4 by ethtool command. UDP over IPv4 and v6 can be set differently. The default hash level is L4. We currently only allow switching TX hash level from within the guests. The ethtool callback function is triggered by command line, and update the per device variables of the hash level. On Azure, fragmented UDP packets is not yet supported with L4 hashing, and may have high packet loss rate. Using L3 hashing is recommended in this case. This ethtool option allows a user to make this selection. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
Update Documentation/networking/netvsc.txt for UDP hash level setting and related info. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
The patch add the functions to switch UDP hash level between L3 and L4 by ethtool command. UDP over IPv4 and v6 can be set differently. The default hash level is L4. We currently only allow switching TX hash level from within the guests. On Azure, fragmented UDP packets have high loss rate with L4 hashing. Using L3 hashing is recommended in this case. For example, for UDP over IPv4 on eth0: To include UDP port numbers in hasing: ethtool -N eth0 rx-flow-hash udp4 sdfn To exclude UDP port numbers in hasing: ethtool -N eth0 rx-flow-hash udp4 sd To show UDP hash level: ethtool -n eth0 rx-flow-hash udp4 Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
The parameter "nvdev" is not in use. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-