1. 20 10月, 2011 38 次提交
    • J
      Btrfs: only inherit btrfs specific flags when creating files · e27425d6
      Josef Bacik 提交于
      Xfstests 79 was failing because we were inheriting the S_APPEND flag when we
      weren't supposed to.  There isn't any specific documentation on this so I'm
      taking the test as the standard of how things work, and having S_APPEND set on a
      directory doesn't mean that S_APPEND gets inherited by its children according to
      this test.  So only inherit btrfs specific things.  This will let us set
      compress/nocompress on specific directories and everything in the directories
      will inherit this flag, same with nodatacow.  With this patch test 79 passes.
      Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      e27425d6
    • J
      Btrfs: allow us to overcommit our enospc reservations · 2bf64758
      Josef Bacik 提交于
      One of the things that kills us is the fact that our ENOSPC reservations are
      horribly over the top in most normal cases.  There isn't too much that can be
      done about this because when we are completely full we really need them to work
      like this so we don't under reserve.  However if there is plenty of unallocated
      chunks on the disk we can use that to gauge how much we can overcommit.  So this
      patch adds chunk free space accounting so we always know how much unallocated
      space we have.  Then if we fail to make a reservation within our allocated
      space, check to see if we can overcommit.  In the normal flushing case (like
      with delalloc metadata reservations) we'll take the free space and divide it by
      2 if our metadata profile is setup for DUP or any of those, and then divide it
      by 8 to make sure we don't overcommit too much.  Then if we're in a non-flushing
      case (we really need this reservation now!) we only limit ourselves to half of
      the free space.  This makes this fio test
      
      [torrent]
      filename=torrent-test
      rw=randwrite
      size=4g
      ioengine=sync
      directory=/mnt/btrfs-test
      
      go from taking around 45 minutes to 10 seconds on my freshly formatted 3 TiB
      file system.  This doesn't seem to break my other enospc tests, but could really
      use some more testing as this is a super scary change.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      2bf64758
    • J
      Btrfs: break out of orphan cleanup if we can't make progress · 8f6d7f4f
      Josef Bacik 提交于
      I noticed while running xfstests 83 that if we didn't have enough space to
      delete our inode the orphan cleanup would just loop.  This is because it keeps
      finding the same orphan item and keeps trying to kill it but can't because we
      don't get an error back from iput for deleting the inode.  So keep track of the
      last guy we tried to kill, if it's the same as the one we're trying to kill
      currently we know we are having problems and can just error out.  I don't have a
      way to test this so look hard and make sure it's right.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      8f6d7f4f
    • J
      Btrfs: use the global reserve as a backup for deleting inodes · 726c35fa
      Josef Bacik 提交于
      Xfstests 83 really stresses our ENOSPC since it uses a 100mb fs which ends up
      with the mixed block group stuff.  Because of this we can run into a situation
      where we don't have enough space to delete inodes, or even worse we can't free
      the inodes when we next mount the fs which causes the orphan code to lose its
      mind.  So if we fail to make our reservation, steal from the global reserve.
      The global reserve will end up taking up the entire rest of the free space on
      the fs in this worst case so there really is no other option.  With this patch
      test 83 doesn't freak out.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      726c35fa
    • J
      Btrfs: stop using write_one_page · 1728366e
      Josef Bacik 提交于
      While looking for a performance regression a user was complaining about, I
      noticed that we had a regression with the varmail test of filebench.  This was
      introduced by
      
      0d10ee2e
      
      which keeps us from calling writepages in writepage.  This is a correct change,
      however it happens to help the varmail test because we write out in larger
      chunks.  This is largly to do with how we write out dirty pages for each
      transaction.  If you run filebench with
      
      load varmail
      set $dir=/mnt/btrfs-test
      run 60
      
      prior to this patch you would get ~1420 ops/second, but with the patch you get
      ~1200 ops/second.  This is a 16% decrease.  So since we know the range of dirty
      pages we want to write out, don't write out in one page chunks, write out in
      ranges.  So to do this we call filemap_fdatawrite_range() on the range of bytes.
      Then we convert the DIRTY extents to NEED_WAIT extents.  When we then call
      btrfs_wait_marked_extents() we only have to filemap_fdatawait_range() on that
      range and clear the NEED_WAIT extents.  This doesn't get us back to our original
      speeds, but I've been seeing ~1380 ops/second, which is a <5% regression as
      opposed to a >15% regression.  That is acceptable given that the original commit
      greatly reduces our latency to begin with.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      1728366e
    • J
      Btrfs: introduce convert_extent_bit · 462d6fac
      Josef Bacik 提交于
      If I have a range where I know a certain bit is and I want to set it to another
      bit the only option I have is to call set and then clear bit, which will result
      in 2 tree searches.  This is inefficient, so introduce convert_extent_bit which
      will go through and set the bit I want and clear the old bit I don't want.
      Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      462d6fac
    • J
      Btrfs: check unused against how much space we actually want · ef3be457
      Josef Bacik 提交于
      There is a bug that may lead to early ENOSPC in our reservation code.  We've
      been checking against num_bytes which may be above and beyond what we want to
      actually reserve, which could give us a false ENOSPC.  Fix this by making sure
      the unused space is above how much we want to reserve and not how much we're
      trying to flush.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      ef3be457
    • J
      Btrfs: fix orphan cleanup regression · a8c9e576
      Josef Bacik 提交于
      In fixing how we deal with bad inodes, we had a regression in the orphan cleanup
      code, since it expects to get a bad inode back.  So fix it to deal with getting
      -ESTALE back by deleting the orphan item manually and moving on.  Thanks,
      Reported-by: NSimon Kirby <sim@hostway.ca>
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      a8c9e576
    • J
      Btrfs: use the inode's mapping mask for allocating pages · 3b16a4e3
      Josef Bacik 提交于
      Johannes pointed out we were allocating only kernel pages for doing writes,
      which is kind of a big deal if you are on 32bit and have more than a gig of ram.
      So fix our allocations to use the mapping's gfp but still clear __GFP_FS so we
      don't re-enter.  Thanks,
      Reported-by: NJohannes Weiner <jweiner@redhat.com>
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      3b16a4e3
    • J
      Btrfs: delay iput when deleting a block group · 455757c3
      Josef Bacik 提交于
      I kept getting warnings from evict because we were calling
      btrfs_start_transaction() with a transaction already started when doing a
      balance.  This is because we remove a block group which requires a transaction,
      and the put the last reference on the cache inode.  Instead of doing this we
      need to delay the iput so it is done not within a transaction having started.
      This gets rid of our warnings.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      455757c3
    • J
      Btrfs: make sure to unset trans->block_rsv before running delayed refs · 9c8d86db
      Josef Bacik 提交于
      Checksums are charged in 2 different ways.  The first case is when we're writing
      to the disk, we account for the new checksums with the delalloc block rsv.  In
      order for this to work we check if we're allocating a block for the csum root
      and if trans->block_rsv == the delalloc block rsv.  But when we're deleting the
      csums because of cow, this is charged to the global block rsv, and is done when
      we run the delayed refs.  So we need to make sure that trans->block_rsv == NULL
      when running the delayed refs.  So set it to NULL and reset it in
      should_end_transaction, and set it to NULL in commit_transaction.  This got rid
      of the ridiculous amount of warnings I was seeing when trying to do a balance.
      Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      9c8d86db
    • J
      Btrfs: stop passing a trans handle all around the reservation code · 4a92b1b8
      Josef Bacik 提交于
      The only thing that we need to have a trans handle for is in
      reserve_metadata_bytes and thats to know how much flushing we can do.  So
      instead of passing it around, just check current->journal_info for a
      trans_handle so we know if we can commit a transaction to try and free up space
      or not.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      4a92b1b8
    • J
      Btrfs: don't get the block_rsv in btrfs_free_tree_block · d02c9955
      Josef Bacik 提交于
      Since the durable block rsv stuff has been killed there is no need to get the
      block_rsv in btrfs_free_tree_block anymore.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      d02c9955
    • J
      Btrfs: use the transactions block_rsv for the csum root · 4c13d758
      Josef Bacik 提交于
      The alloc warnings everybody has been seeing is because we have been reserving
      space for csums, but we weren't actually using that space.  So make
      get_block_rsv() return the trans->block_rsv if we're modifying the csum root.
      Also set the trans->block_rsv to NULL so that if we modify the csum root when
      running delayed ref's that comes out of the global reserve like it's supposed
      to.  With this patch I'm not seeing those alloc warnings anymore.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      4c13d758
    • J
      Btrfs: handle enospc accounting for free space inodes · c09544e0
      Josef Bacik 提交于
      Since free space inodes now use normal checksumming we need to make sure to
      account for their metadata use.  So reserve metadata space, and then if we fail
      to write out the metadata we can just release it, otherwise it will be freed up
      when the io completes.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      c09544e0
    • J
      Btrfs: put the block group cache after we commit the super · 300e4f8a
      Josef Bacik 提交于
      In moving some enospc stuff around I noticed that when we unmount we are often
      evicting the free space cache inodes before we do our last commit.  This isn't
      bad, but it makes us constantly have to re-read the inodes back.  So instead
      don't evict the cache until after we do our last commit, this will make things a
      little less crappy and makes a future enospc change work properly.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      300e4f8a
    • J
      Btrfs: set truncate block rsv's size · 4a338542
      Josef Bacik 提交于
      While debugging a different issue I noticed that we were always reserving space
      when we tried to use our truncate block rsv's.  This is because they didn't have
      a ->size value, so use_block_rsv just assumes there is nothing reserved and it
      does a reserve_metadata_bytes.  This is because btrfs_check_block_rsv() doesn't
      actually add to the size of the block rsv.  That seems to be the right thing to
      do so set ->size to the minimum truncate size we need, since we will always only
      refill to that size anyway, and this way everything works out correctly.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      4a338542
    • J
      Btrfs: don't increase the block_rsv's size when emergency allocating space · 7f701508
      Josef Bacik 提交于
      If we have to emergency reserve space we need to not increase the block_rsv
      size, otherwise we'll leak space.  Take for instance delalloc, say we reserve
      4k, and we use that 4k, and then we have to emergency allocate another 4k, we
      bump the size up to 8k, however we've only accounted for 4k in reservations in
      all of our supporting logic, so we'll go to free the 4k and end up having a size
      of 4k, which will cause us to later not free as much space.  I saw this doing
      testing where I wasn't reserving enough space for something but was still
      leaking space, very frustrating.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      7f701508
    • J
      Btrfs: fix space leak when we fail to make an allocation · 7ed49f18
      Josef Bacik 提交于
      When changing back to using a spin_lock to protect the extent counters I decided
      that since we would only be dropping our original extent, it was ok to just drop
      the extent and return.  However since somebody else could have come in and done
      a reservation, we need to do the normal song and dance to clear the reservation
      out properly.  So calculate how much space we need to free, and then subtract
      what we just attempted to reserve.  If it's more then we know we need to drop
      those bytes from the delalloc block rsv.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      7ed49f18
    • J
      Btrfs: fix call to btrfs_search_slot in free space cache · a9b5fcdd
      Josef Bacik 提交于
      We are setting ins_len to 1 even tho we are just modifying an item that should
      be there already.  This may cause the search stuff to split nodes on the way
      down needelessly.  Set this to 0 since we aren't inserting anything.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      a9b5fcdd
    • J
      Btrfs: allow callers to specify if flushing can occur for btrfs_block_rsv_check · 482e6dc5
      Josef Bacik 提交于
      If you run xfstest 224 it you will get lots of messages about not being able to
      delete inodes and that they will be cleaned up next mount.  This is because
      btrfs_block_rsv_check was not calling reserve_metadata_bytes with the ability to
      flush, so if there was not enough space, it simply failed.  But in truncate and
      evict case we could easily flush space to try and get enough space to do our
      work, so make btrfs_block_rsv_check take a flush argument to pass down to
      reserve_metadata_bytes.  Now xfstests 224 runs fine without all those
      complaints.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      482e6dc5
    • J
      Btrfs: reduce the amount of space needed for truncates · 07127184
      Josef Bacik 提交于
      With btrfs_truncate_inode_items we always return if we have to go to another
      leaf, which makes us do our reservation again.  This means we will only ever
      modify one leaf at a time, so we only need 1 items worth of slack space.  Also,
      since we are deleting we will not be creating nodes as we go down, if anything
      we'll be free'ing them as we merge them together, so make a different
      calculation for truncate which will only have the worst case useage of COW'ing
      the entire path down to the leaf.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      07127184
    • J
      Btrfs: only reserve space in fallocate if we have to do a preallocate · 1b9c332b
      Josef Bacik 提交于
      Lukas found a problem where if he tries to fallocate over the same region twice
      and the first fallocate took up all the space we would fail with ENOSPC.  This
      is because we reserve the total space we want to use for fallocate, regardless
      of wether or not we will have to actually preallocate.  So instead move the
      check into the loop where we actually have to do the preallocate.  Thanks,
      Tested-by: NLukas Czerner <lczerner@redhat.com>
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      1b9c332b
    • J
      Btrfs: kill btrfs_truncate_reserve_metadata · 5e962c78
      Josef Bacik 提交于
      Since we've optimized the truncate path, we no longer require this function.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      5e962c78
    • J
      Btrfs: optimize how we account for space in truncate · 907cbceb
      Josef Bacik 提交于
      Currently we're starting and stopping a transaction for no real reason, so kill
      that and just reserve enough space as if we can truncate all in one transaction.
      Also use btrfs_block_rsv_check() for our reserve to minimize the amount of space
      we may have to allocate for our slack space.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      907cbceb
    • J
      Btrfs: don't try to commit in btrfs_block_rsv_check · 13553e52
      Josef Bacik 提交于
      We will try and reserve metadata bytes in btrfs_block_rsv_check and if we cannot
      because we have a transaction open it will return EAGAIN, so we do not need to
      try and commit the transaction again.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      13553e52
    • J
      Btrfs: kill unused parts of block_rsv · dabdb640
      Josef Bacik 提交于
      The priority and refill_used flags are not used anymore, and neither is the
      usage counter, so just remove them from btrfs_block_rsv.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      dabdb640
    • J
      Btrfs: ratelimit the generation printk for the free space cache · 6ab60601
      Josef Bacik 提交于
      A user reported getting spammed when moving to 3.0 by this message.  Since we
      switched to the normal checksumming infrastructure all old free space caches
      will be wrong and need to be regenerated so people are likely to see this
      message a lot, so ratelimit it so it doesn't fill up their logs and freak them
      out.  Thanks,
      Reported-by: NAndrew Lutomirski <luto@mit.edu>
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      6ab60601
    • J
      Btrfs: fix how we reserve space for deleting inodes · 4289a667
      Josef Bacik 提交于
      I converted btrfs_truncate to do sane reservations for truncate, but didn't
      convert btrfs_evict_inode.  Basically we need to save the orphan_rsv for
      deleting the orphan item, and do normal reservations for our truncate.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      4289a667
    • J
      Btrfs: kill the durable block rsv stuff · 37be25bc
      Josef Bacik 提交于
      This is confusing code and isn't used by anything anymore, so delete it.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      37be25bc
    • J
      Btrfs: kill the orphan space calculation for snapshots · dba68306
      Josef Bacik 提交于
      This patch kills off the calculation for the amount of space needed for the
      orphan operations during a snapshot.  The thing is we only do snapshots on
      commit, so any space that is in the block_rsv->freed[] isn't going to be in the
      new snapshot anyway, so there isn't any reason to require that space to be
      reserved for the snapshot to occur.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      dba68306
    • J
      Btrfs: calculate checksum space correctly · 7709cde3
      Josef Bacik 提交于
      We have not been reserving enough space for checksums.  We were just reserving
      bytes for the checksum items themselves, we were not taking into account having
      to cow the tree and such.  This patch adds a csum_bytes counter to the inode for
      keeping track of the number of bytes outstanding we have for checksums.  Then we
      calculate how many leaves would be required for the checksums we are given and
      use that to reserve space.  This adds a significant amount of bytes to our
      reservations, but we will handle this later.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      7709cde3
    • J
      Btrfs: skip looking for delalloc if we don't have ->fill_delalloc · 9e487107
      Josef Bacik 提交于
      We always look for delalloc bytes in our io_tree so we can fill in delalloc.
      This is fine in most cases, but if we're writing out the btree_inode this is
      just a superfluous tree search on the io_tree, and if we have a lot of metadata
      dirty this could be an expensive check.  So instead check to see if our io_tree
      has a ->fill_delalloc op, and if not don't even bother doing the lookup.
      Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      9e487107
    • J
      Btrfs: use bytes_may_use for all ENOSPC reservations · fb25e914
      Josef Bacik 提交于
      We have been using bytes_reserved for metadata reservations, which is wrong
      since we use that to keep track of outstanding reservations from the allocator.
      This resulted in us doing a lot of silly things to make sure we don't allocate a
      bunch of metadata chunks since we never had a real view of how much space was
      actually in use by metadata.
      
      This passes Arne's enospc test and xfstests as well as my own enospc tests.
      Hopefully this will get us moving in the right direction.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      fb25e914
    • J
      Btrfs: fix how we mount subvol=<whatever> · 830c4adb
      Josef Bacik 提交于
      We've only been able to mount with subvol=<whatever> where whatever was a subvol
      within whatever root we had as the default.  This allows us to mount -o
      subvol=path/to/subvol/you/want relative from the normal fs_tree root.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      830c4adb
    • J
      Btrfs: use d_obtain_alias when mounting subvol/subvolid · ba5b8958
      Josef Bacik 提交于
      Currently what we do is just wrong.  We either
      
      1) Alloc a new "root" dentry with sb->s_root as it's parent which is just wrong
      as we could walk into this subvol later on via another path and hilarity could
      ensue.  Also we don't check the return value of d_splice_alias which isn't good
      either.
      
      or
      
      2) Do a d_find_alias() which we could have lost our dentry from cache at this
      point and found nothing.
      
      So use d_obtain_alias().  In the case that we already have the inode/dentry in
      cache we will get the correct dentry.  If not we will get a disconnected dentry
      tree so if we walk into it later on everything will be connected up properly.
      Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      ba5b8958
    • J
      Btrfs: kill reserved_bytes in inode · 0cbbdf7c
      Josef Bacik 提交于
      reserved_bytes is not used for anything in the inode, remove it.
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      0cbbdf7c
    • J
      Btrfs: move stuff around in btrfs_inode to get better packing · f1bdcc0a
      Josef Bacik 提交于
      Moving things around to give us better packing in the btrfs_inode.  This reduces
      the size of our inode by 8 bytes.  Thanks,
      Signed-off-by: NJosef Bacik <josef@redhat.com>
      f1bdcc0a
  2. 05 10月, 2011 2 次提交
    • L
      Linux 3.1-rc9 · 976d1676
      Linus Torvalds 提交于
      976d1676
    • L
      Merge git://github.com/davem330/net · 8a04b453
      Linus Torvalds 提交于
      * git://github.com/davem330/net:
        pch_gbe: Fixed the issue on which a network freezes
        pch_gbe: Fixed the issue on which PC was frozen when link was downed.
        make PACKET_STATISTICS getsockopt report consistently between ring and non-ring
        net: xen-netback: correctly restart Tx after a VM restore/migrate
        bonding: properly stop queuing work when requested
        can bcm: fix incomplete tx_setup fix
        RDSRDMA: Fix cleanup of rds_iw_mr_pool
        net: Documentation: Fix type of variables
        ibmveth: Fix oops on request_irq failure
        ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket
        cxgb4: Fix EEH on IBM P7IOC
        can bcm: fix tx_setup off-by-one errors
        MAINTAINERS: tehuti: Alexander Indenbaum's address bounces
        dp83640: reduce driver noise
        ptp: fix L2 event message recognition
      8a04b453