- 10 5月, 2009 2 次提交
-
-
由 Florian Westphal 提交于
If module initialisation failed (e.g. because the bonding sysfs entry cannot be created), kernel panics: IP: [<ffffffff8024910a>] destroy_workqueue+0x2d/0x146 Call Trace: [<ffffffff808268c4>] bond_destructor+0x28/0x78 [<ffffffff80b64471>] netdev_run_todo+0x231/0x25a [<ffffffff80b6dbcd>] rtnl_unlock+0x9/0xb [<ffffffff81567907>] bonding_init+0x83e/0x84a Remove the calls to bond_work_cancel_all() and destroy_workqueue(); both are also called/scheduled via bond_free_all(). bond_destroy_sysfs is unecessary because the sysfs entry has not been created in the error case. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
- 09 5月, 2009 4 次提交
-
-
由 Krzysztof Hałasa 提交于
Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>
-
由 Krzysztof Hałasa 提交于
ENOSYS makes modutils complain about missing kernel module support. Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>
-
由 Simon Horman 提交于
This fixes the use of fwmarks to denote IPv4 virtual services which was unfortunately broken as a result of the integration of IPv6 support into IPVS, which was included in 2.6.28. The problem arises because fwmarks are stored in the 4th octet of a union nf_inet_addr .all, however in the case of IPv4 only the first octet, corresponding to .ip, is assigned and compared. In other words, using .all = { 0, 0, 0, htonl(svc->fwmark) always results in a value of 0 (32bits) being stored for IPv4. This means that one fwmark can be used, as it ends up being mapped to 0, but things break down when multiple fwmarks are used, as they all end up being mapped to 0. As fwmarks are 32bits a reasonable fix seems to be to just store the fwmark in .ip, and comparing and storing .ip when fwmarks are used. This patch makes the assumption that in calls to ip_vs_ct_in_get() and ip_vs_sched_persist() if the proto parameter is IPPROTO_IP then we are dealing with an fwmark. I believe this is valid as ip_vs_in() does fairly strict filtering on the protocol and IPPROTO_IP should not be used in these calls unless explicitly passed when making these calls for fwmarks in ip_vs_sched_persist(). Tested-by: NFabien Duchêne <fabien.duchene@student.uclouvain.be> Cc: Joseph Mack NA3T <jmack@wm7d.net> Cc: Julius Volz <julius.volz@gmail.com> Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This code is used as a library by several device drivers, which select INET_LRO. If some are modules and some are statically built into the kernel, we get build failures if INET_LRO is modular. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 5月, 2009 1 次提交
-
-
由 Ashish Karkare 提交于
Signed-off-by: NAshish Karkare <akarkare@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 5月, 2009 7 次提交
-
-
由 Lennert Buytenhek 提交于
Commit ac45f602 ("net: infrastructure for hardware time stamping") added two skb initialization actions to __alloc_skb(), which need to be added to skb_recycle_check() as well. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NPatrick Ohly <patrick.ohly@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add barrier() to bnx2_get_hw_{tx|rx}_cons() to fix this issue: http://bugzilla.kernel.org/show_bug.cgi?id=12698 This issue was reported by multiple i386 users. Without barrier(), the compiled code looks like the following where %eax contains the address of the tx_cons or rx_cons in the DMA status block. The status block contents can change between the cmpb and the movzwl instruction. The driver would crash if the value was not 0xff during the cmpb instruction, but changed to 0xff during the movzwl instruction. 6828: 80 38 ff cmpb $0xff,(%eax) 682b: 0f b7 10 movzwl (%eax),%edx With the added barrier(), the compiled code now looks correct: 683d: 0f b7 10 movzwl (%eax),%edx 6840: 0f b6 c2 movzbl %dl,%eax 6843: 3d ff 00 00 00 cmp $0xff,%eax Thanks to Pascal de Bruijn <pmjdebruijn@pcode.nl> for reporting the problem and Holger Noefer <hnoefer@pironet-ndh.com> for patiently testing test patches for us. Also updated version to 2.0.1. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
When no limit is given, the bfifo uses a default of tx_queue_len * mtu. Packets handled by qdiscs include the link layer header, so this should be taken into account, similar to what other qdiscs do. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The setup_rctl call was making a call into the ring structure after it had been freed. This was causing a panic on shutdown. This call wasn't necessary since it is possible to get the needed index from adapter->vfs_allocated_count. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Inaky Perez-Gonzalez 提交于
When a new wimax_dev is created, it's state has to be __WIMAX_ST_NULL until wimax_dev_add() is succesfully called. This allows calls into the stack that happen before said time to be rejected. Until now, the state was being set (by mistake) to UNINITIALIZED, which was allowing calls such as wimax_report_rfkill_hw() to go through even when a call to wimax_dev_add() had failed; that was causing an oops when touching uninitialized data. This situation is normal when the device starts reporting state before the whole initialization has been completed. It just has to be dealt with. Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
-
由 Inaky Perez-Gonzalez 提交于
When sending a message to user space using wimax_msg(), if nla_put() fails, correctly interpret the return code from wimax_msg_alloc() as an err ptr and return the error code instead of crashing (as it is assuming than non-NULL means the pointer is ok). Signed-off-by: NInaky Perez-Gonzalez <inaky@linux.intel.com>
-
- 06 5月, 2009 3 次提交
-
-
由 Marcel Holtmann 提交于
Setting the name of a sysfs device has to be done in a context that can actually sleep. It allocates its memory with GFP_KERNEL. Previously it was a static (size limited) string and that got changed to accommodate longer device names. So move the dev_set_name() just before calling device_add() which is executed in a work queue. This fixes the following error: [ 110.012125] BUG: sleeping function called from invalid context at mm/slub.c:1595 [ 110.012135] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper [ 110.012141] 2 locks held by swapper/0: [ 110.012145] #0: (hci_task_lock){++.-.+}, at: [<ffffffffa01f822f>] hci_rx_task+0x2f/0x2d0 [bluetooth] [ 110.012173] #1: (&hdev->lock){+.-.+.}, at: [<ffffffffa01fb9e2>] hci_event_packet+0x72/0x25c0 [bluetooth] [ 110.012198] Pid: 0, comm: swapper Tainted: G W 2.6.30-rc4-g953cdaa #1 [ 110.012203] Call Trace: [ 110.012207] <IRQ> [<ffffffff8023eabd>] __might_sleep+0x14d/0x170 [ 110.012228] [<ffffffff802cfbe1>] __kmalloc+0x111/0x170 [ 110.012239] [<ffffffff803c2094>] kvasprintf+0x64/0xb0 [ 110.012248] [<ffffffff803b7a5b>] kobject_set_name_vargs+0x3b/0xa0 [ 110.012257] [<ffffffff80465326>] dev_set_name+0x76/0xa0 [ 110.012273] [<ffffffffa01fb9e2>] ? hci_event_packet+0x72/0x25c0 [bluetooth] [ 110.012289] [<ffffffffa01ffc1d>] hci_conn_add_sysfs+0x3d/0x70 [bluetooth] [ 110.012303] [<ffffffffa01fba2c>] hci_event_packet+0xbc/0x25c0 [bluetooth] [ 110.012312] [<ffffffff80516eb0>] ? sock_def_readable+0x80/0xa0 [ 110.012328] [<ffffffffa01fee0c>] ? hci_send_to_sock+0xfc/0x1c0 [bluetooth] [ 110.012343] [<ffffffff80516eb0>] ? sock_def_readable+0x80/0xa0 [ 110.012347] [<ffffffff805e88c5>] ? _read_unlock+0x75/0x80 [ 110.012354] [<ffffffffa01fee0c>] ? hci_send_to_sock+0xfc/0x1c0 [bluetooth] [ 110.012360] [<ffffffffa01f8403>] hci_rx_task+0x203/0x2d0 [bluetooth] [ 110.012365] [<ffffffff80250ab5>] tasklet_action+0xb5/0x160 [ 110.012369] [<ffffffff8025116c>] __do_softirq+0x9c/0x150 [ 110.012372] [<ffffffff805e850f>] ? _spin_unlock+0x3f/0x80 [ 110.012376] [<ffffffff8020cbbc>] call_softirq+0x1c/0x30 [ 110.012380] [<ffffffff8020f01d>] do_softirq+0x8d/0xe0 [ 110.012383] [<ffffffff80250df5>] irq_exit+0xc5/0xe0 [ 110.012386] [<ffffffff8020e71d>] do_IRQ+0x9d/0x120 [ 110.012389] [<ffffffff8020c3d3>] ret_from_intr+0x0/0xf [ 110.012391] <EOI> [<ffffffff80431832>] ? acpi_idle_enter_bm+0x264/0x2a6 [ 110.012399] [<ffffffff80431828>] ? acpi_idle_enter_bm+0x25a/0x2a6 [ 110.012403] [<ffffffff804f50d5>] ? cpuidle_idle_call+0xc5/0x130 [ 110.012407] [<ffffffff8020a4b4>] ? cpu_idle+0xc4/0x130 [ 110.012411] [<ffffffff805d2268>] ? rest_init+0x88/0xb0 [ 110.012416] [<ffffffff807e2fbd>] ? start_kernel+0x3b5/0x412 [ 110.012420] [<ffffffff807e2281>] ? x86_64_start_reservations+0x91/0xb5 [ 110.012424] [<ffffffff807e2394>] ? x86_64_start_kernel+0xef/0x11b Based on a report by Davide Pesavento <davidepesa@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Tested-by: NHugo Mildenberger <hugo.mildenberger@namir.de> Tested-by: NBing Zhao <bzhao@marvell.com>
-
- 05 5月, 2009 20 次提交
-
-
由 Pablo Neira Ayuso 提交于
This patch fixes the wrong message type that are triggered by user updates, the following commands: (term1)# conntrack -I -p tcp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 --state LISTEN (term1)# conntrack -U -p tcp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 --state SYN_SENT (term1)# conntrack -U -p tcp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 --state SYN_RECV only trigger event message of type NEW, when only the first is NEW while others should be UPDATE. (term2)# conntrack -E [NEW] tcp 6 10 LISTEN src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0 [NEW] tcp 6 10 SYN_SENT src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0 [NEW] tcp 6 10 SYN_RECV src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0 This patch also removes IPCT_REFRESH from the bitmask since it is not of any use. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Pablo Neira Ayuso 提交于
This patch fixes a problem when you use 32 nodes in the cluster match: % iptables -I PREROUTING -t mangle -i eth0 -m cluster \ --cluster-total-nodes 32 --cluster-local-node 32 \ --cluster-hash-seed 0xdeadbeef -j MARK --set-mark 0xffff iptables: Invalid argument. Run `dmesg' for more information. % dmesg | tail -1 xt_cluster: this node mask cannot be higher than the total number of nodes The problem is related to this checking: if (info->node_mask >= (1 << info->total_nodes)) { printk(KERN_ERR "xt_cluster: this node mask cannot be " "higher than the total number of nodes\n"); return false; } (1 << 32) is 1. Thus, the checking fails. BTW, I said this before but I insist: I have only tested the cluster match with 2 nodes getting ~45% extra performance in an active-active setup. The maximum limit of 32 nodes is still completely arbitrary. I'd really appreciate if people that have more nodes in their setups let me know. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Christoph Paasch 提交于
As packets ending with NEXTHDR_NONE don't have a last extension header, the check for the length needs to be after the check for NEXTHDR_NONE. Signed-off-by: NChristoph Paasch <christoph.paasch@gmail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Patrick McHardy 提交于
Pointed out by Dave Miller: CHECK include/linux/netfilter (57 files) /home/davem/src/GIT/net-2.6/usr/include/linux/netfilter/xt_LED.h:6: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Jesse Brandeburg 提交于
a recent fix to e1000 (commit 15b2bee2) caused KVM/QEMU/VMware based virtualized e1000 interfaces to begin failing when resetting. This is because the driver in a virtual environment doesn't get to run instructions *AT ALL* when an interrupt is asserted. The interrupt code runs immediately and this recent bug fix allows an interrupt to be possible when the interrupt handler will reject it (due to the new code), when being called from any path in the driver that holds the E1000_RESETTING flag. the driver should use the __E1000_DOWN flag instead of the __E1000_RESETTING flag to prevent interrupt execution while reconfiguring the hardware. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jay Vosburgh 提交于
Fix locking issue in alb MAC address management; removed incorrect locking and replaced with correct locking. This bug was introduced in commit 059fe7a5 ("bonding: Convert locks to _bh, rework alb locking for new locking") Bug reported by Paul Smith <paul@mad-scientist.net>, who also tested the fix. Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcel Holtmann 提交于
Due to a semantic changes in flush_workqueue() the current approach of synchronizing the sysfs handling for connections doesn't work anymore. The whole approach is actually fully broken and based on assumptions that are no longer valid. With the introduction of Simple Pairing support, the creation of low-level ACL links got changed. This change invalidates the reason why in the past two independent work queues have been used for adding/removing sysfs devices. The adding of the actual sysfs device is now postponed until the host controller successfully assigns an unique handle to that link. So the real synchronization happens inside the controller and not the host. The only left-over problem is that some internals of the sysfs device handling are not initialized ahead of time. This leaves potential access to invalid data and can cause various NULL pointer dereferences. To fix this a new function makes sure that all sysfs details are initialized when an connection attempt is made. The actual sysfs device is only registered when the connection has been successfully established. To avoid a race condition with the registration, the check if a device is registered has been moved into the removal work. As an extra protection two flush_work() calls are left in place to make sure a previous add/del work has been completed first. Based on a report by Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Tested-by: NJustin P. Mattock <justinmattock@gmail.com> Tested-by: NRoger Quadros <ext-roger.quadros@nokia.com> Tested-by: NMarc Pignat <marc.pignat@hevs.ch>
-
由 Jiri Slaby 提交于
pid doesn't count with some band having more bitrates than the one associated the first time. Fix that by counting the maximal available bitrate count and allocate big enough space. Secondly, fix touching uninitialized memory which causes panics. Index sucked from this random memory points to the hell. The fix is to sort the rates on each band change. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jiri Slaby 提交于
minstrel doesn't count max rate count in fact, since it doesn't use a loop variable `i' and hence allocs space only for bitrates found in the first band. Fix it by involving the `i' as an index so that it traverses all the bands now and finds the real max bitrate count. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
During initialization we would not have received any beacons so skip processing reg beacon hints, also adds a check to reg_is_world_roaming() for last_request before accessing its fields. This should fix this: BUG: unable to handle kernel NULL pointer dereference at IP: [<e0171332>] wiphy_update_regulatory+0x20f/0x295 *pdpt = 0000000008bf1001 *pde = 0000000000000000 Oops: 0000 [#1] last sysfs file: /sys/class/backlight/eeepc/brightness Modules linked in: ath5k(+) mac80211 led_class cfg80211 go_bit cfbcopyarea cfbimgblt cfbfillrect ipv6 ydev usual_tables(P) snd_hda_codec_realtek snd_hda_intel nd_hwdep uhci_hcd snd_pcm_oss snd_mixer_oss i2c_i801 e serio_raw i2c_core pcspkr atl2 snd_pcm intel_agp re agpgart eeepc_laptop snd_page_alloc ac video backlight rfkill button processor evdev thermal fan ata_generic Pid: 2909, comm: modprobe Tainted: Pc #112) 701 EIP: 0060:[<e0171332>] EFLAGS: 00010246 CPU: 0 EIP is at wiphy_update_regulatory+0x20f/0x295 [cfg80211] EAX: 00000000 EBX: c5da0000 ECX: 00000000 EDX: c5da0060 ESI: 0000001a EDI: c5da0060 EBP: df3bdd70 ESP: df3bdd40 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process modprobe (pid: 2909, ti=df3bc000 task=c5d030000) Stack: df3bdd90 c5da0060 c04277e0 00000001 00000044 c04277e402 00000002 c5da0000 0000001a c5da0060 df3bdda8 e01706a2 02 00000282 000080d0 00000068 c5d53500 00000080 0000028240 Call Trace: [<e01706a2>] ? wiphy_register+0x122/0x1b7 [cfg80211] [<e0328e02>] ? ieee80211_register_hw+0xd8/0x346 [<e06a7c9f>] ? ath5k_hw_set_bssid_mask+0x71/0x78 [ath5k] [<e06b0c52>] ? ath5k_pci_probe+0xa5c/0xd0a [ath5k] [<c01a6037>] ? sysfs_find_dirent+0x16/0x27 [<c01fec95>] ? local_pci_probe+0xe/0x10 [<c01ff526>] ? pci_device_probe+0x48/0x66 [<c024c9fd>] ? driver_probe_device+0x7f/0xf2 [<c024cab3>] ? __driver_attach+0x43/0x5f [<c024c0af>] ? bus_for_each_dev+0x39/0x5a [<c024c8d0>] ? driver_attach+0x14/0x16 [<c024ca70>] ? __driver_attach+0x0/0x5f [<c024c5b3>] ? bus_add_driver+0xd7/0x1e7 [<c024ccb9>] ? driver_register+0x7b/0xd7 [<c01ff827>] ? __pci_register_driver+0x32/0x85 [<e00a8018>] ? init_ath5k_pci+0x18/0x30 [ath5k] [<c0101131>] ? _stext+0x49/0x10b [<e00a8000>] ? init_ath5k_pci+0x0/0x30 [ath5k] [<c012f452>] ? __blocking_notifier_call_chain+0x40/0x4c [<c013a714>] ? sys_init_module+0x87/0x18b [<c0102804>] ? sysenter_do_call+0x12/0x22 Code: b8 da 17 e0 83 c0 04 e8 92 f9 ff ff 84 c0 75 2a 8b 85 c0 74 0c 83 c0 04 e8 7c f9 ff ff 84 c0 75 14 a1 bc da 4 03 74 66 8b 4d d4 80 79 08 00 74 5d a1 e0 d2 17 e0 48 EIP: [<e0171332>] wiphy_update_regulatory+0x20f/0x295 SP 0068:df3bdd40 CR2: 0000000000000004 ---[ end trace 830f2dd2a95fd1a8 ]--- This issue is hard to reproduce, but it was noticed and discussed on this thread: http://marc.info/?t=123938022700005&r=1&w=2 Cc: stable@kernel.org Reported-by: NAlan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We forgot to lock using the cfg80211_mutex in wiphy_apply_custom_regulatory(). Without the lock there is possible race between processing a reply from CRDA and a driver calling wiphy_apply_custom_regulatory(). During the processing of the reply from CRDA we free last_request and wiphy_apply_custom_regulatory() eventually accesses an element from last_request in the through freq_reg_info_regd(). This is very difficult to reproduce (I haven't), it takes us 3 hours and you need to be banging hard, but the race is obvious by looking at the code. This should only affect those who use this caller, which currently is ath5k, ath9k, and ar9170. EIP: 0060:[<f8ebec50>] EFLAGS: 00210282 CPU: 1 EIP is at freq_reg_info_regd+0x24/0x121 [cfg80211] EAX: 00000000 EBX: f7ca0060 ECX: f5183d94 EDX: 0024cde0 ESI: f8f56edc EDI: 00000000 EBP: 00000000 ESP: f5183d44 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 14617, ti=f5182000 task=f3934d10 task.ti=f5182000) Stack: c0505300 f7ca0ab4 f5183d94 0024cde0 f8f403a6 f8f63160 f7ca0060 00000000 00000000 f8ebedf8 f5183d90 f8f56edc 00000000 00000004 00000f40 f8f56edc f7ca0060 f7ca1234 00000000 00000000 00000000 f7ca14f0 f7ca0ab4 f7ca1289 Call Trace: [<f8ebedf8>] wiphy_apply_custom_regulatory+0x8f/0x122 [cfg80211] [<f8f3f798>] ath_attach+0x707/0x9e6 [ath9k] [<f8f45e46>] ath_pci_probe+0x18d/0x29a [ath9k] [<c023c7ba>] pci_device_probe+0xa3/0xe4 [<c02a860b>] really_probe+0xd7/0x1de [<c02a87e7>] __driver_attach+0x37/0x55 [<c02a7eed>] bus_for_each_dev+0x31/0x57 [<c02a83bd>] driver_attach+0x16/0x18 [<c02a78e6>] bus_add_driver+0xec/0x21b [<c02a8959>] driver_register+0x85/0xe2 [<c023c9bb>] __pci_register_driver+0x3c/0x69 [<f8e93043>] ath9k_init+0x43/0x68 [ath9k] [<c010112b>] _stext+0x3b/0x116 [<c014a872>] sys_init_module+0x8a/0x19e [<c01049ad>] sysenter_do_call+0x12/0x21 [<ffffe430>] 0xffffe430 ======================= Code: 0f 94 c0 c3 31 c0 c3 55 57 56 53 89 c3 83 ec 14 8b 74 24 2c 89 54 24 0c 89 4c 24 08 85 f6 75 06 8b 35 c8 bb ec f8 a1 cc bb ec f8 <8b> 40 04 83 f8 03 74 3a 48 74 37 8b 43 28 85 c0 74 30 89 c6 8b EIP: [<f8ebec50>] freq_reg_info_regd+0x24/0x121 [cfg80211] SS:ESP 0068:f5183d44 Cc: stable@kernel.org Reported-by: NNataraj Sadasivam <Nataraj.Sadasivam@Atheros.com> Reported-by: NVivek Natarajan <Vivek.Natarajan@Atheros.com> Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
We need to be symmetrical in what is done when key is set and cleared. This is important wrt the key flags as they are used during key clearing and if they are not set when the key is set the key cannot be cleared completely. This addresses the many occurences of the WARN found in iwl_set_tkip_dynamic_key_info() and tracked in http://www.kerneloops.org/searchweek.php?search=iwl_set_dynamic_key If calling iwl_set_tkip_dynamic_key_info()/iwl_remove_dynamic_key() pair a few times in a row will cause that we run out of key space. This is because the index stored in the key flags is used by iwl_remove_dynamic_key() to decide if it should remove the key. Unfortunately the key flags, and hence the key index is currently only set at the time the key is written to the device (in iwl_update_tkip_key()) and _not_ in iwl_set_tkip_dynamic_key_info(). Fix this by setting flags in iwl_set_tkip_dynamic_key_info(). Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Another bug in the "cfg80211: do not replace BSS structs" patch, a forgotten length update leads to bogus data being stored and passed to userspace, often truncated. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The fragmentation threshold is defined to be including the FCS, and the code that sets the TX_FRAGMENTED flag correctly accounts for those four bytes. The code that verifies this doesn't though, which could lead to spurious warnings and frames being dropped although everything is ok. Correct the code by accounting for the FCS. (JWL -- The problem is described here: http://article.gmane.org/gmane.linux.kernel.wireless.general/32205 ) Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andreas Schwab 提交于
It does not make sense to apply EXPORT_SYMBOL to a static symbol. Fixes this build error: drivers/net/wireless/iwlwifi/iwl3945-base.c:1697: error: __ksymtab_iwl3945_rx_queue_reset causes a section type conflict Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Omar Laazimani 提交于
This introduces a CDC Ethernet Emulation Model (EEM) host side driver to support USB EEM devices. EEM is different from the Ethernet Control Model (ECM) currently supported by the "CDC Ethernet" driver. One key difference is that it doesn't require of USB interface alternate settings to manage interface state; some maldesigned hardware can't handle that part of USB. It also avoids a separate USB interface for control and status updates. [ dbrownell@users.sourceforge.net: fix skb leaks, add rx packet checks, improve fault handling, EEM conformance updates, cleanup ] Signed-off-by: NOmar Laazimani <omar.oberthur@gmail.com> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satoru SATOH 提交于
tcp_prequeue() refers to the constant value (TCP_RTO_MIN) regardless of the actual value might be tuned. The following patches fix this and make tcp_prequeue get the actual value returns from tcp_rto_min(). Signed-off-by: NSatoru SATOH <satoru.satoh@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Hering 提交于
This patch fixes an invalid pointer access in case the receive queue holds no pointer to the next skb when the queue is empty. Signed-off-by: NHannes Hering <hering2@de.ibm.com> Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2009 3 次提交
-
-
由 Lubomir Rintel 提交于
Doing it in reverse order causes uevent to be sent before we have a MAC address, which confuses udev. Signed-off-by: NLubomir Rintel <lkundrak@v3.sk> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rabin Vincent 提交于
Commit 0ba25ff4 ("br2684: convert to net_device_ops") inadvertently deleted the initialization of the net_dev pointer in the br2684_dev structure, leading to crashes. This patch adds it back. Reported-by: NMikko Vinni <mmvinni@yahoo.com> Tested-by: NMikko Vinni <mmvinni@yahoo.com> Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Love 提交于
The kernel should only be using the high 16 bits of a kernel generated priority. Filter priorities in all other cases only use the upper 16 bits of the u32 'prio' field of 'struct tcf_proto', but when the kernel generates the priority of a filter is saves all 32 bits which can result in incorrect lookup failures when a filter needs to be deleted or modified. Signed-off-by: NRobert Love <robert.w.love@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-