- 15 11月, 2016 1 次提交
-
-
由 Chris Metcalf 提交于
The tile architecture already marks RO_DATA as read-only in the kernel, so grouping RO_AFTER_INIT_DATA with RO_DATA, as is done by default, means the kernel faults in init when it tries to write to RO_AFTER_INIT_DATA. For now, just arrange that __ro_after_init is handled like __write_once, i.e. __read_mostly. Reviewed-by: NKees Cook <keescook@chromium.org> Signed-off-by: NChris Metcalf <cmetcalf@mellanox.com>
-
- 06 11月, 2016 12 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fix from Wolfram Sang: "A bugfix for the I2C core fixing a (rare) race condition" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: fix NULL pointer dereference under race condition
-
由 Linus Torvalds 提交于
Merge branches 'sched-urgent-for-linus' and 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull stack vmap fixups from Thomas Gleixner: "Two small patches related to sched_show_task(): - make sure to hold a reference on the task stack while accessing it - remove the thread_saved_pc printout .. and add a sanity check into release_task_stack() to catch problems with task stack references" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Remove pointless printout in sched_show_task() sched/core: Fix oops in sched_show_task() * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fork: Add task stack refcounting sanity check and prevent premature task stack freeing
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md由 Linus Torvalds 提交于
Pull MD fixes from Shaohua Li: "There are several bug fixes queued: - fix raid5-cache recovery bugs - fix discard IO error handling for raid1/10 - fix array sync writes bogus position to superblock - fix IO error handling for raid array with external metadata" * tag 'md/4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md: be careful not lot leak internal curr_resync value into metadata. -- (all) raid1: handle read error also in readonly mode raid5-cache: correct condition for empty metadata write md: report 'write_pending' state when array in sync md/raid5: write an empty meta-block when creating log super-block md/raid5: initialize next_checkpoint field before use RAID10: ignore discard error RAID1: ignore discard error
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "Two more important data integrity fixes related to RAID device drivers which wrongly throw away the SYNCHRONIZE CACHE command in the non-RAID path and a memory leak in the scsi_debug driver" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input subsystem updates from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - cleanup Focaltech code Input: i8042 - add XMG C504 to keyboard reset table
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394由 Linus Torvalds 提交于
Pull FireWire (IEEE 1394) fixes from Stefan Richter: - add missing input validation to the firewire-net driver. Invalid IP-over-1394 encapsulation headers could trigger buffer overflows (CVE 2016-8633). - IP-over-1394 link fragmentation headers were read and written incorrectly, breaking fragmented RX/TX with other OS's stacks. * tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: net: fix fragmented datagram_size off-by-one firewire: net: guard against rx buffer overflows
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "A series of fixup patches meant to fix the usage of DMA on stack, plus one warning fixup" * tag 'media/v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (32 commits) [media] radio-bcm2048: don't ignore errors [media] pctv452e: fix semicolon.cocci warnings [media] flexcop-usb: don't use stack for DMA [media] stk-webcam: don't use stack for DMA [media] s2255drv: don't use stack for DMA [media] cpia2_usb: don't use stack for DMA [media] digitv: handle error code on RC query [media] dw2102: return error if su3000_power_ctrl() fails [media] nova-t-usb2: handle error code on RC query [media] technisat-usb2: use DMA buffers for I2C transfers [media] pctv452e: don't call BUG_ON() on non-fatal error [media] pctv452e: don't do DMA on stack [media] nova-t-usb2: don't do DMA on stack [media] gp8psk: don't go past the buffer size [media] gp8psk: don't do DMA on stack [media] dtv5100: don't do DMA on stack [media] dtt200u: handle USB control message errors [media] dtt200u: don't do DMA on stack [media] dtt200u-fe: handle errors on USB control messages [media] dtt200u-fe: don't do DMA on stack ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: - fix for a Qualcomm driver issue that causes a use-before-set crash - fix for DesignWare iATU unroll support that causes external aborts when enabling the host bridge * tag 'pci-v4.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: designware: Check for iATU unroll support after initializing host PCI: qcom: Fix pp->dev usage before assignment
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD fixes from Brian Norris: - MAINTAINERS updates to reflect some new maintainers/submaintainers. We have some great volunteers who've been developing and reviewing already. We're going to try a group maintainership model, so eventually you'll probably see pull requests from people besides me. - NAND fixes from Boris: "Three simple fixes: - fix a non-critical bug in the gpmi driver - fix a bug in the 'automatic NAND timings selection' feature introduced in 4.9-rc1 - fix a false positive uninitialized-var warning" * tag 'for-linus-20161104' of git://git.infradead.org/linux-mtd: mtd: mtk: avoid warning in mtk_ecc_encode mtd: nand: Fix data interface configuration logic mtd: nand: gpmi: disable the clocks on errors MAINTAINERS: add more people to the MTD maintainer team MAINTAINERS: add a maintainer for the SPI NOR subsystem
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc由 Linus Torvalds 提交于
Pull MMC fixes from Ulf Hansson: "MMC host: - sdhci-msm: Fix error path in probe - dw_mmc-pltfm: Avoid NULL pointer dereference" * tag 'mmc-v4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-msm: Fix error return code in sdhci_msm_probe() mmc: dw_mmc-pltfm: fix the potential NULL pointer dereference
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO fixes from Linus Walleij: "Some GPIO fixes for the v4.9 series: - Fix a nasty file descriptor leak when getting line handles. - A fix for a cleanup that seemed innocent but created a problem for drivers instantiating several gpiochips for one single OF node. - Fix a unpredictable problem using irq_domain_simple() in the mvebu driver by converting it to a lineas irqdomain" * tag 'gpio-v4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio/mvebu: Use irq_domain_add_linear gpio: of: fix GPIO drivers with multiple gpio_chip for a single node gpio: GPIO_GET_LINE{HANDLE,EVENT}_IOCTL: Fix file descriptor leak
-
- 05 11月, 2016 9 次提交
-
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd bugfixes from Bruce Fields: "Fixes for some recent regressions including fallout from the vmalloc'd stack change (after which we can no longer encrypt stuff on the stack)" * tag 'nfsd-4.9-1' of git://linux-nfs.org/~bfields/linux: nfsd: Fix general protection fault in release_lock_stateid() svcrdma: backchannel cannot share a page for send and rcv buffers sunrpc: fix some missing rq_rbuffer assignments sunrpc: don't pass on-stack memory to sg_set_buf nfsd: move blocked lock handling under a dedicated spinlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "Some fixes that Dave Sterba collected. We held off on these last week because I was focused on the memory corruption testing" * 'for-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix WARNING in btrfs_select_ref_head() Btrfs: remove some no-op casts btrfs: pass correct args to btrfs_async_run_delayed_refs() btrfs: make file clone aware of fatal signals btrfs: qgroup: Prevent qgroup->reserved from going subzero Btrfs: kill BUG_ON in do_relocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs由 Linus Torvalds 提交于
Pull overlayfs fixes from Miklos Szeredi: "Fix two more POSIX ACL bugs introduced in 4.8 and add a missing fsync during copy up to prevent possible data loss" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fsync after copy-up ovl: fix get_acl() on tmpfs ovl: update S_ISGID when setting posix ACLs
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Fixes for amdgpu, radeon, intel, imx and virtio-gpu. This is a bit larger than I'd like, but I had some stuff I meant to send for -rc3 but was waiting for the PAT regression fix to land. So this is really fixes for rc3 and rc4 in one go. There are a set of fixes for an oops we've been seeing around MST display unplug, along with more suspend/resume and shutdown fixes for amdgpu, one power management follow on fix for nouveau, and set of imx fixes, and a single virtio-gpu regression fix" * tag 'drm-fixes-for-v4.9-rc4' of git://people.freedesktop.org/~airlied/linux: (54 commits) virtio-gpu: fix vblank events drm/nouveau/acpi: fix check for power resources support drm/i915: Fix SKL+ 90/270 degree rotated plane coordinate computation drm/i915: Remove two invalid warns drm/i915: Rotated view does not need a fence drm/i915/fbc: fix CFB size calculation for gen8+ drm: i915: Wait for fences on new fb, not old drm/i915: Clean up DDI DDC/AUX CH sanitation drm/i915: Respect alternate_aux_channel for all DDI ports drm/i915/gen9: fix watermarks when using the pipe scaler drm/i915: Fix mismatched INIT power domain disabling during suspend drm/i915: fix a read size argument drm/i915: Use fence_write() from rpm resume drm/i915/gen9: fix DDB partitioning for multi-screen cases drm/i915: workaround sparse warning on variable length arrays drm/i915: keep declarations in i915_drv.h drm/amd/powerplay: fix bug get wrong evv voltage of Polaris. drm/amdgpu/si_dpm: workaround for SI kickers drm/radeon/si_dpm: workaround for SI kickers drm/amdgpu: fix s3 resume back, uvd dpm randomly can't disable. ...
-
由 Niklas Cassel 提交于
dw_pcie_iatu_unroll_enabled() reads a dbi_base register. Reading any dbi_base register before pp->ops->host_init has been called causes "imprecise external abort" on platforms like ARTPEC-6, where the PCIe module is disabled at boot and first enabled in pp->ops->host_init. Move dw_pcie_iatu_unroll_enabled() to dw_pcie_setup_rc(), since it is after pp->ops->host_init, but before pp->iatu_unroll_enabled is actually used. Fixes: a0601a47 ("PCI: designware: Add iATU Unroll feature") Tested-by: NJames Le Cuirot <chewi@gentoo.org> Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NJoao Pinto <jpinto@synopsys.com> Acked-by: NOlof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM updates from Paolo Bonzini: "One NULL pointer dereference, and two fixes for regressions introduced during the merge window. The rest are fixes for MIPS, s390 and nested VMX" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: Check memopp before dereference (CVE-2016-8630) kvm: nVMX: VMCLEAR an active shadow VMCS after last use KVM: x86: drop TSC offsetting kvm_x86_ops to fix KVM_GET/SET_CLOCK KVM: x86: fix wbinvd_dirty_mask use-after-free kvm/x86: Show WRMSR data is in hex kvm: nVMX: Fix kernel panics induced by illegal INVEPT/INVVPID types KVM: document lock orders KVM: fix OOPS on flush_work KVM: s390: Fix STHYI buffer alignment for diag224 KVM: MIPS: Precalculate MMIO load resume PC KVM: MIPS: Make ERET handle ERL before EXL KVM: MIPS: Fix lazy user ASID regenerate for SMP
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "A set of MIPS fixes for 4.9: - lots of fixes for printk continuations - six fixes for FP related code. - fix max_low_pfn with disabled highmem - fix KASLR handling of NULL FDT and KASLR for generic kernels - fix build of compressed image - provide default mips_cpc_default_phys_base to ignore CPC - fix reboot on Malta" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix max_low_pfn with disabled highmem MIPS: Correct MIPS I FP sigcontext layout MIPS: Fix ISA I/II FP signal context offsets MIPS: Remove FIR from ISA I FP signal context MIPS: Fix ISA I FP sigcontext access violation handling MIPS: Fix FCSR Cause bit handling for correct SIGFPE issue MIPS: ptrace: Also initialize the FP context on individual FCSR writes MIPS: dump_tlb: Fix printk continuations MIPS: Fix __show_regs() output MIPS: traps: Fix output of show_code MIPS: traps: Fix output of show_stacktrace MIPS: traps: Fix output of show_backtrace MIPS: Fix build of compressed image MIPS: generic: Fix KASLR for generic kernel. MIPS: KASLR: Fix handling of NULL FDT MIPS: Malta: Fixup reboot MIPS: CPC: Provide default mips_cpc_default_phys_base to ignore CPC
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc updates from Helge Deller: "The first three patches are trivial and add some required KERN_CONT, ignore the new pkey syscalls on parisc and use the LINUX_GATEWAY_ADDR define instead of hardcoded values. The two patches from Dave Anglin are important. The first one avoids trashing the sr2 and sr3 space registers in the Light-weight syscall path. Especially the usage of sr3 is critical since it may get trashed by the interrupt handler. The second patch is even more important and tagged for stable series. It protects one critical section in the syscall entry path by disabling local interrupts. Without disabling interrupts, the sr7 space register may not be in sync with the current stack setup and thus an incoming hardware interrupt may destroy memory in random userspace areas" * 'parisc-4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Ignore the pkey system calls for now parisc: Use LINUX_GATEWAY_ADDR define instead of hardcoded value parisc: Ensure consistent state when switching to kernel stack at syscall entry parisc: Avoid trashing sr2 and sr3 in LWS code parisc: use KERN_CONT when printing device inventory
-
由 Vladimir Zapolskiy 提交于
Race condition between registering an I2C device driver and deregistering an I2C adapter device which is assumed to manage that I2C device may lead to a NULL pointer dereference due to the uninitialized list head of driver clients. The root cause of the issue is that the I2C bus may know about the registered device driver and thus it is matched by bus_for_each_drv(), but the list of clients is not initialized and commonly it is NULL, because I2C device drivers define struct i2c_driver as static and clients field is expected to be initialized by I2C core: i2c_register_driver() i2c_del_adapter() driver_register() ... bus_add_driver() ... ... bus_for_each_drv(..., __process_removed_adapter) ... i2c_do_del_adapter() ... list_for_each_entry_safe(..., &driver->clients, ...) INIT_LIST_HEAD(&driver->clients); To solve the problem it is sufficient to do clients list head initialization before calling driver_register(). The problem was found while using an I2C device driver with a sluggish registration routine on a bus provided by a physically detachable I2C master controller, but practically the oops may be reproduced under the race between arbitraty I2C device driver registration and managing I2C bus device removal e.g. by unbinding the latter over sysfs: % echo 21a4000.i2c > /sys/bus/platform/drivers/imx-i2c/unbind Unable to handle kernel NULL pointer dereference at virtual address 00000000 Internal error: Oops: 17 [#1] SMP ARM CPU: 2 PID: 533 Comm: sh Not tainted 4.9.0-rc3+ #61 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: e5ada400 task.stack: e4936000 PC is at i2c_do_del_adapter+0x20/0xcc LR is at __process_removed_adapter+0x14/0x1c Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 35bd004a DAC: 00000051 Process sh (pid: 533, stack limit = 0xe4936210) Stack: (0xe4937d28 to 0xe4938000) Backtrace: [<c0667be0>] (i2c_do_del_adapter) from [<c0667cc0>] (__process_removed_adapter+0x14/0x1c) [<c0667cac>] (__process_removed_adapter) from [<c0516998>] (bus_for_each_drv+0x6c/0xa0) [<c051692c>] (bus_for_each_drv) from [<c06685ec>] (i2c_del_adapter+0xbc/0x284) [<c0668530>] (i2c_del_adapter) from [<bf0110ec>] (i2c_imx_remove+0x44/0x164 [i2c_imx]) [<bf0110a8>] (i2c_imx_remove [i2c_imx]) from [<c051a838>] (platform_drv_remove+0x2c/0x44) [<c051a80c>] (platform_drv_remove) from [<c05183d8>] (__device_release_driver+0x90/0x12c) [<c0518348>] (__device_release_driver) from [<c051849c>] (device_release_driver+0x28/0x34) [<c0518474>] (device_release_driver) from [<c0517150>] (unbind_store+0x80/0x104) [<c05170d0>] (unbind_store) from [<c0516520>] (drv_attr_store+0x28/0x34) [<c05164f8>] (drv_attr_store) from [<c0298acc>] (sysfs_kf_write+0x50/0x54) [<c0298a7c>] (sysfs_kf_write) from [<c029801c>] (kernfs_fop_write+0x100/0x214) [<c0297f1c>] (kernfs_fop_write) from [<c0220130>] (__vfs_write+0x34/0x120) [<c02200fc>] (__vfs_write) from [<c0221088>] (vfs_write+0xa8/0x170) [<c0220fe0>] (vfs_write) from [<c0221e74>] (SyS_write+0x4c/0xa8) [<c0221e28>] (SyS_write) from [<c0108a20>] (ret_fast_syscall+0x0/0x1c) Signed-off-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
- 04 11月, 2016 17 次提交
-
-
由 James Hogan 提交于
When low memory doesn't reach HIGHMEM_START (e.g. up to 256MB at PA=0 is common) and highmem is present above HIGHMEM_START (e.g. on Malta the RAM overlayed by the IO region is aliased at PA=0x90000000), max_low_pfn will be initially calculated very large and then clipped down to HIGHMEM_START. This causes crashes when reading /sys/kernel/mm/page_idle/bitmap (i.e. CONFIG_IDLE_PAGE_TRACKING=y) when highmem is disabled. pfn_valid() will compare against max_mapnr which is derived from max_low_pfn when there is no highend_pfn set up, and will return true for PFNs right up to HIGHMEM_START, even though they are beyond the end of low memory and no page structs will actually exist for these PFNs. This is fixed by skipping high memory regions when initially calculating max_low_pfn if highmem is disabled, so it doesn't get clipped too high. We also clip regions which overlap the highmem boundary when highmem is disabled, so that max_pfn doesn't extend into highmem either. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14490/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Complement commit 80cbfad7 ("MIPS: Correct MIPS I FP context layout") and correct the way Floating Point General registers are stored in a signal context with MIPS I hardware. Use the S.D and L.D assembly macros to have pairs of SWC1 instructions and pairs of LWC1 instructions produced, respectively, in an arrangement which makes the memory representation of floating-point data passed compatible with that used by hardware SDC1 and LDC1 instructions, where available, regardless of the hardware endianness used. This matches the layout used by r4k_fpu.S, ensuring run-time compatibility for MIPS I software across all o32 hardware platforms. Define an EX2 macro to handle exceptions from both hardware instructions implicitly produced from S.D and L.D assembly macros. Signed-off-by: NMaciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14477/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Fix a regression introduced with commit 2db9ca0a ("MIPS: Use struct mips_abi offsets to save FP context") for MIPS I/I FP signal contexts, by converting save/restore code to the updated internal API. Start FGR offsets from 0 rather than SC_FPREGS from $a0 and use $a1 rather than the offset of SC_FPC_CSR from $a0 for the Floating Point Control/Status Register (FCSR). Document the new internal API and adjust assembly code formatting for consistency. Signed-off-by: NMaciej W. Rozycki <macro@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14476/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Complement commit e50c0a8f ("Support the MIPS32 / MIPS64 DSP ASE.") and remove the Floating Point Implementation Register (FIR) from the FP register set recorded in a signal context with MIPS I processors too, in line with the change applied to r4k_fpu.S. The `sc_fpc_eir' slot is unused according to our current ABI and the FIR register is read-only and always directly accessible from user software. [ralf@linux-mips.org: This is also required because the next commit depends on it.] Signed-off-by: NMaciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14475/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Complement commit 0ae8dceaebe3 ("Merge with 2.3.10.") and use the local `fault' handler to recover from FP sigcontext access violation faults, like corresponding code does in r4k_fpu.S. The `bad_stack' handler is in syscall.c and is not suitable here as we want to propagate the error condition up through the caller rather than killing the thread outright. Signed-off-by: NMaciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14474/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Sanitize FCSR Cause bit handling, following a trail of past attempts: * commit 42495484 ("MIPS: ptrace: Fix FP context restoration FCSR regression"), * commit 443c4403 ("MIPS: Always clear FCSR cause bits after emulation"), * commit 64bedffe ("MIPS: Clear [MSA]FPE CSR.Cause after notify_die()"), * commit b1442d39 ("MIPS: Prevent user from setting FCSR cause bits"), * commit b54d2901517d ("Properly handle branch delay slots in connection with signals."). Specifically do not mask these bits out in ptrace(2) processing and send a SIGFPE signal instead whenever a matching pair of an FCSR Cause and Enable bit is seen as execution of an affected context is about to resume. Only then clear Cause bits, and even then do not clear any bits that are set but masked with the respective Enable bits. Adjust Cause bit clearing throughout code likewise, except within the FPU emulator proper where they are set according to IEEE 754 exceptions raised as the operation emulated executed. Do so so that any IEEE 754 exceptions subject to their default handling are recorded like with operations executed by FPU hardware. Signed-off-by: NMaciej W. Rozycki <macro@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14460/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
Complement commit ac9ad83b ("MIPS: prevent FP context set via ptrace being discarded") and also initialize the FP context whenever FCSR alone is written with a PTRACE_POKEUSR request addressing FPC_CSR, rather than along with the full FPU register set in the case of the PTRACE_SETFPREGS request. Signed-off-by: NMaciej W. Rozycki <macro@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14459/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 James Hogan 提交于
Since commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") the output from TLB dumps on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Continuation is also used for the second line of each TLB entry printed in dump_tlb.c even though it has a newline, since it is a continuation of the interpretation of the same TLB entry. For example: [ 46.371884] Index: 0 pgmask=16kb va=77654000 asid=73 gid=00 [ri=0 xi=0 pa=ffc18000 c=5 d=0 v=1 g=0] [ri=0 xi=0 pa=ffc1c000 c=5 d=0 v=1 g=0] [ 46.385380] Index: 12 pgmask=16kb va=004b4000 asid=73 gid=00 [ri=0 xi=0 pa=00000000 c=0 d=0 v=0 g=0] [ri=0 xi=0 pa=ffb00000 c=5 d=1 v=1 g=0] Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14444/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Since commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") the output from __show_regs() on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected register output. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14432/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Matt Redfearn 提交于
Since commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") the output from show_code on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14431/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Matt Redfearn 提交于
Since commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") the output from show_stacktrace on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Also start a new line with printk such that the presence of timing information does not interfere with output. Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14430/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Matt Redfearn 提交于
Since commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") the output from show_backtrace on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14429/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Matt Redfearn 提交于
Changes introduced to arch/mips/Makefile for the generic kernel resulted in build errors when making a compressed image if platform-y has multiple values, like this: make[2]: *** No rule to make target `alchemy/'. make[1]: *** [vmlinuz] Error 2 make[1]: Target `_all' not remade because of errors. make: *** [sub-make] Error 2 make: Target `_all' not remade because of errors. Fix this by quoting $(platform-y) as it is passed to the Makefile in arch/mips/boot/compressed/Makefile Reported-by: Nkernelci.org bot <bot@kernelci.org> Link: https://storage.kernelci.org/next/next-20161017/mips-gpr_defconfig/build.logSigned-off-by: NMatt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: NPaul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14405/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Matt Redfearn 提交于
The KASLR code requires that the plat_get_fdt() function return the address of the device tree, and it must be available early in the boot, before prom_init() is called. Move the code determining the address of the device tree into plat_get_fdt, and call that from prom_init(). The fdt pointer will be set up by plat_get_fdt() called from relocate_kernel initially and once the relocated kernel has started, prom_init() will use it again to determine the address in the relocated image. Fixes: eed0eabd ("MIPS: generic: Introduce generic DT-based board support") Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Reviewed-by: NPaul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14415/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Matt Redfearn 提交于
If platform code returns a NULL pointer to the FDT, initial_boot_params will not get set to a valid pointer and attempting to find the /chosen node in it will cause a NULL pointer dereference and the kernel to crash immediately on startup - with no output to the console. Fix this by checking that initial_boot_params is valid before using it. Fixes: 405bc8fd ("MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE") Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14414/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Commit 10b6ea09 ("MIPS: Malta: Use syscon-reboot driver to reboot") converted the Malta board to use the generic syscon-reboot driver to handle reboots, but incorrectly used the value 0x4d rather than 0x42 as the magic to write to the reboot register. I also incorrectly believed that syscon/regmap would default to native endianness, but this isn't the case. Force this by specifying with a native-endian property in the devicetree. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Fixes: 10b6ea09 ("MIPS: Malta: Use syscon-reboot driver to reboot") Reported-by: NGuenter Roeck <linux@roeck-us.net> Cc: linux-mips@linux-mips.org Tested-by: NGuenter Roeck <linux@roeck-us.net> Tested-by: NMaciej W. Rozycki <macro@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/14396/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Provide a default implementation of mips_cpc_default_phys_base() which simply returns 0, and adjust mips_cpc_phys_base() to allow for mips_cpc_default_phys_base() returning 0. This allows kernels which include CPC support to be built without platform code & simply ignore the CPC if it wasn't already enabled by the bootloader. This fixes link failures such as the following from generic defconfigs: arch/mips/built-in.o: In function `mips_cpc_phys_base': arch/mips/kernel/mips-cpc.c:47: undefined reference to `mips_cpc_default_phys_base' [ralf@linux-mips.org: changed prototype for coding style compliance.] Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14401/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 03 11月, 2016 1 次提交
-
-
由 Stefan Richter 提交于
RFC 2734 defines the datagram_size field in fragment encapsulation headers thus: datagram_size: The encoded size of the entire IP datagram. The value of datagram_size [...] SHALL be one less than the value of Total Length in the datagram's IP header (see STD 5, RFC 791). Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got this field with a -/+1 offset: ether1394_tx() /* transmit */ ether1394_encapsulate_prep() hdr->ff.dg_size = dg_size - 1; ether1394_data_handler() /* receive */ if (hdr->common.lf == ETH1394_HDR_LF_FF) dg_size = hdr->ff.dg_size + 1; else dg_size = hdr->sf.dg_size + 1; Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500 byte sized datagrams in fragments with datagram_size=1499 if link fragmentation is required. Only firewire-net sets and gets datagram_size without this offset. The result is lacking interoperability of firewire-net with OS X, Windows XP, and presumably Linux' eth1394. (I did not test with the latter.) For example, FTP data transfers to a Linux firewire-net box with max_rec smaller than the 1500 bytes MTU - from OS X fail entirely, - from Win XP start out with a bunch of fragmented datagrams which time out, then continue with unfragmented datagrams because Win XP temporarily reduces the MTU to 576 bytes. So let's fix firewire-net's datagram_size accessors. Note that firewire-net thereby loses interoperability with unpatched firewire-net, but only if link fragmentation is employed. (This happens with large broadcast datagrams, and with large datagrams on several FireWire CardBus cards with smaller max_rec than equivalent PCI cards, and it can be worked around by setting a small enough MTU.) Cc: stable@vger.kernel.org Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-