Use the recently added support for bus operations to provide a standard
mapping for AC'97 register I/O.
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>

We return a pointer, not an int.
Signed-off-by: NMark Brown <broonie@linaro.org>

Add a new function regmap_get_device to obtain the underlying struct
device from a regmap.
Signed-off-by: NTuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Some busses do not support sending/receiving multiple registers in one go.
Such kind of busses just unpack the registers that have been previously
packed by the regmap core or pack registers that will be later unpacked by
the core code.

Add reg_write and reg_read callbacks in order to optimize access through
this kind of busses.
Signed-off-by: NBoris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This is the implementation of regmap_multi_reg_write()

There is a new capability 'can_multi_write' that device drivers
must set in order to use this multi reg write mode.

This replaces the first definition, which just defined the API.
Signed-off-by: NAnthony Olech <anthony.olech.opensource@diasemi.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

    In some cases, we need regmap's format parse_val function
to do be/le translation according to the bus configuration.
For example, snd_soc_bytes_put() uses regmap to write/read values,
and use cpu_to_be() directly to covert MASK into big endian. This
is a defect, and should use regmap's format function to do it according
to bus configuration.
Signed-off-by: NNenghua Cao <nhcao@marvell.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Devices with more complex boot proceedures may occasionally apply the
register patch manual. regmap_multi_reg_write is a logical way to do so,
however the patch must be applied with cache bypass on, such that it
doesn't override any user settings. This patch adds a
regmap_multi_reg_write_bypassed function that applies a set of writes
with the bypass enabled.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

There should be no need for the writes supplied to this function to be
edited by it so mark them as const.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Create special function regmap_attach_dev
which can be called separately out of regmap_init.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

SPMI states that a slave may contain two register spaces, the Base
register space is a 5-bit byte-addressable space accessed via the
Register Read/Write and Register Zero Write command sequences, and the
Extended register space: a 16-bit byte-addressable space accessed via
the Extended Read/Write and Extended Read/Write Long command sequences.

Provide support for accessing both of these spaces, taking advantage of
the more bandwidth-efficient commands ('Register 0 Write' vs 'Register
Write', and 'Extended Register Read/Write' vs 'Extended Register
Read/Write Long') when possible.
Signed-off-by: NJosh Cartwright <joshc@codeaurora.org>
Acked-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These sentences are not proper English due to the typos. I had initially caught
one of them while trying to understand the regmap feature, and then I just ran
the vim spell checker, and went through all the items that would need to be
fixed for this header file.
Signed-off-by: NLaszlo Papp <lpapp@kde.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

In some cases, clear interrupt register may be at address 0.
This patch allows to use such configurations by adding additional
configuration bit to indicate this.

[With doc fix from Levente Kurusa <levex@linux.com> -- broonie]
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add basic support for the System Power Management Interface (SPMI) bus.
This is a simple implementation which only implements register accesses
via the Extended Register Read/Write Long commands.
Signed-off-by: NJosh Cartwright <joshc@codeaurora.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

New API regmap_multi_reg_write() is defined that allows a set of reg,val
pairs to be written to a I2C client device as one block transfer from the
point of view of a single I2C master system.

A simple demonstration implementation is included that just splits the
block write request into a sequence of single register writes.

The implementation will be modified later to support those I2C clients
that implement the alternative non-standard MULTIWRITE block write mode
so to achieve a single I2C transfer that will be atomic even in multiple
I2C master systems.
Signed-off-by: NAnthony Olech <anthony.olech.opensource@diasemi.com>
Signed-off-by: NDavid Dajun Chen <david.chen@diasemi.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Make it easier for drivers to include single register writes in
asynchronous sequences by providing async versions of the write
and update bits operations. The update bits operations are only
likely to be effective when used with devices that have caches
but this is common enough to be useful.
Signed-off-by: NMark Brown <broonie@linaro.org>

Add helper macro to set the min and max value of the register range.

This is useful when initialising the register ranges of the device like

static const struct regmap_range readable_ranges[] = {
	regmap_reg_range(DEVICE_REG0, DEVICE_REG10),
};
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Current Linux kernel is supporting regmap_field method
and it is very useful feature.
It needs one regmap_filed for one register access.

OTOH, there is multi port device which
has many same registers in the market.
The difference for each register access is
only its address offset.

Current API needs many regmap_field for such device,
but it is not good.
This patch adds new regmap_fileds API which can care
about multi port/offset access via regmap.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Current regmap_field is supporting read/write functions.
This patch adds new update_bits function for it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The use of WARN_ON() needs the definitions from bug.h, without it
you can get:

include/linux/regmap.h: In function 'regmap_write':
include/linux/regmap.h:525:2: error: implicit declaration of function 'WARN_ONCE' [-Werror=implicit-function-declaration]
Signed-off-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

regmap.h requires linux/err.h if CONFIG_REGMAP is not defined. Without it I get
error.
CC      drivers/media/platform/exynos4-is/fimc-reg.o
In file included from drivers/media/platform/exynos4-is/fimc-reg.c:14:0:
include/linux/regmap.h: In function ‘regmap_write’:
include/linux/regmap.h:525:10: error: ‘EINVAL’ undeclared (first use in this function)
include/linux/regmap.h:525:10: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: NMateusz Krawczuk <m.krawczuk@partner.samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>
Cc: stable@kernel.org

Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch makes mask/wake_invert bool and puts all flags into a bitfield
for consistency and to save some space.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

In case the hardware interrupt mask register does not prevent the chip level
irq from being asserted by the corresponding interrupt status bit, already
set interrupt bits should to be cleared once after masking them during
initialization. Add a flag to let drivers enable this behavior.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

It is common to access regmap registers at bit level, using
regmap_update_bits or regmap_read functions, however the end user has to
take care of a mask or shifting. This becomes overhead when such use
cases are high. Having a common function to do this is much convenient
and less error prone.

The idea of regmap_field is simple, regmap_field gives a logical
structure to bits of the regmap register, and the driver can use this
logical entity without the knowledge of the bit positions and masks all
over the code. This way code looks much neat and it need not handle the
masks, shifts every time it access the those entities.

With this new regmap_field_read/write apis the end user can setup a
regmap field using regmap_field_init and use the return regmap_field to
read write the register field without worrying about the masks or
shifts.

Also this apis will be useful for drivers which are based on regmaps,
like some clocks or pinctrls which can work on the regmap_fields
directly without having to worry about bit positions.
Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Allow drivers to use an access table as part of their implementation.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Allow drivers to discard parts of the register cache, for example if part
of the hardware has been reset.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Mainly useful internally but exported since this is a public API that's
being checked for.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Some mmio devices have a dedicated interface clock that needs
to be enabled to access their registers. This patch optionally
enables a clock before accessing registers in the regmap_bus
callbacks.

I added (devm_)regmap_init_mmio_clk variants of the init
functions that have an added clk_id string parameter. This
is passed to clk_get to request the clock from the clk
framework.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Some use cases like firmware download can transfer a lot of data in quick
succession. With high speed buses these use cases can benefit from having
multiple transfers scheduled at once since this allows the bus to minimise
the delay between transfers.

Support this by adding regmap_raw_write_async(), allowing raw transfers to
be scheduled, and regmap_async_complete() to wait for them to finish.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This commit adds provision for "no-bus" usage of the regmap API. In
this configuration user can provide API with two callbacks 'reg_read'
and 'reg_write' which are to be called when reads and writes to one of
device's registers is performed. This is useful for devices that
expose registers but whose register access sequence does not fit the 'bus'
abstraction.
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Support devices which have an enable rather than mask register for wake
sources.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

While for I2C and SPI devices the overhead of using rbtree for devices with
only one block of registers is negligible the same isn't always going to
be true for MMIO devices where the I/O costs are very much lower. Cater
for these devices by adding a simple flat array type for them where the
lookups are simple array accesses, taking us right back to the original
ASoC cache implementation.

Thanks to Magnus Damm for the discussion which prompted this.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Many of the regmap enabled drivers implementing one or more of the
readable, writeable, volatile and precious methods use the same code
pattern:

	return ((reg >= X && reg <= Y) || (reg >= W && reg <= Z) || ...)

Switch to a data driven approach, using tables to describe
readable/writeable/volatile and precious registers ranges instead.
The table based check can still be overridden by passing the usual function
pointers via struct regmap_config.
Signed-off-by: NDavide Ciminaghi <ciminaghi@gnudd.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

It is sometimes convenient for a regmap user to override the standard
regmap lock/unlock functions with custom functions.
For instance this can be useful in case an already existing spinlock
or mutex has to be used for locking a set of registers instead of the
internal regmap spinlock/mutex.
Note that the fast_io field of struct regmap_bus is ignored in case
custom locking functions are used.
Signed-off-by: NDavide Ciminaghi <ciminaghi@gnudd.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

For more useful diagnostics.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This makes things consistent with the rest of the API and is actually what
the documentation says. We don't currently have any in tree users so low
cost.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This is useful for integration with other subsystems, especially MFD,
and provides an alternative API for users that request their own IRQs.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Currently, regmap will write 1 to mask_base to mask
an interrupt and write 0 to unmask it.

But some chips do not have an interrupt mask register,
and only have interrupt enable register.
Then we should write 0 to disable interrupt and 1 to enable.

So add an mask_invert flag to handle this.
If it is not set, behavior is same as previous.
If set it to 1, the mask value will be inverted
before written to mask_base
Signed-off-by: NXiaofan Tian <tianxf@marvell.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Some devices need to have a runtime PM reference while handling interrupts
to ensure that the register I/O is available. Support this with a flag in
the chip.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Devices with register paging or indirectly accessed registers can configure
register mapping to map those on virtual address range. During access to
virtually mapped register range, indirect addressing is processed
automatically, in following steps:
  1. selector for page or indirect register is updated (when needed);
  2. register in data window is accessed.

Configuration should provide minimum and maximum register for virtual range,
details of selector field for page selection, minimum and maximum register of
data window for indirect access.

Virtual range registers are managed by cache as well as direct access
registers. In order to make indirect access more efficient, selector register
should be declared as non-volatile, if possible.

struct regmap_config is extended with the following:
struct regmap_range_cfg	*ranges;
unsigned int		n_ranges;

[Also reordered debugfs init to later on since the cleanup code was
conflicting with the new cleanup code for ranges anyway -- broonie]
Signed-off-by: NKrystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>