- 21 11月, 2019 2 次提交
-
-
由 Paolo Bonzini 提交于
"Shared MSRs" are guest MSRs that are written to the host MSRs but keep their value until the next return to userspace. They support a mask, so that some bits keep the host value, but this mask is only used to skip an unnecessary MSR write and the value written to the MSR is always the guest MSR. Fix this and, while at it, do not update smsr->values[slot].curr if for whatever reason the wrmsr fails. This should only happen due to reserved bits, so the value written to smsr->values[slot].curr will not match when the user-return notifier and the host value will always be restored. However, it is untidy and in rare cases this can actually avoid spurious WRMSRs on return to userspace. Cc: stable@vger.kernel.org Reviewed-by: NJim Mattson <jmattson@google.com> Tested-by: NJim Mattson <jmattson@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
KVM does not implement MSR_IA32_TSX_CTRL, so it must not be presented to the guests. It is also confusing to have !ARCH_CAP_TSX_CTRL_MSR && !RTM && ARCH_CAP_TAA_NO: lack of MSR_IA32_TSX_CTRL suggests TSX was not hidden (it actually was), yet the value says that TSX is not vulnerable to microarchitectural data sampling. Fix both. Cc: stable@vger.kernel.org Tested-by: NJim Mattson <jmattson@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 15 11月, 2019 1 次提交
-
-
由 Marc Zyngier 提交于
Add a comment explaining the rational behind having both no_compat open and ioctl callbacks to fend off compat tasks. Signed-off-by: NMarc Zyngier <maz@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 14 11月, 2019 2 次提交
-
-
由 Sean Christopherson 提交于
Acquire the per-VM slots_lock when zapping all shadow pages as part of toggling nx_huge_pages. The fast zap algorithm relies on exclusivity (via slots_lock) to identify obsolete vs. valid shadow pages, because it uses a single bit for its generation number. Holding slots_lock also obviates the need to acquire a read lock on the VM's srcu. Failing to take slots_lock when toggling nx_huge_pages allows multiple instances of kvm_mmu_zap_all_fast() to run concurrently, as the other user, KVM_SET_USER_MEMORY_REGION, does not take the global kvm_lock. (kvm_mmu_zap_all_fast() does take kvm->mmu_lock, but it can be temporarily dropped by kvm_zap_obsolete_pages(), so it is not enough to enforce exclusivity). Concurrent fast zap instances causes obsolete shadow pages to be incorrectly identified as valid due to the single bit generation number wrapping, which results in stale shadow pages being left in KVM's MMU and leads to all sorts of undesirable behavior. The bug is easily confirmed by running with CONFIG_PROVE_LOCKING and toggling nx_huge_pages via its module param. Note, until commit 4ae5acbc4936 ("KVM: x86/mmu: Take slots_lock when using kvm_mmu_zap_all_fast()", 2019-11-13) the fast zap algorithm used an ulong-sized generation instead of relying on exclusivity for correctness, but all callers except the recently added set_nx_huge_pages() needed to hold slots_lock anyways. Therefore, this patch does not have to be backported to stable kernels. Given that toggling nx_huge_pages is by no means a fast path, force it to conform to the current approach instead of reintroducing the previous generation count. Fixes: b8e8c830 ("kvm: mmu: ITLB_MULTIHIT mitigation", but NOT FOR STABLE) Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Marc Zyngier 提交于
On a system without KVM_COMPAT, we prevent IOCTLs from being issued by a compat task. Although this prevents most silly things from happening, it can still confuse a 32bit userspace that is able to open the kvm device (the qemu test suite seems to be pretty mad with this behaviour). Take a more radical approach and return a -ENODEV to the compat task. Reported-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NMarc Zyngier <maz@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 13 11月, 2019 5 次提交
-
-
由 Xiaoyao Li 提交于
When applying commit 7a5ee6ed ("KVM: X86: Fix initialization of MSR lists"), it forgot to reset the three MSR lists number varialbes to 0 while removing the useless conditionals. Fixes: 7a5ee6ed (KVM: X86: Fix initialization of MSR lists) Signed-off-by: NXiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Vitaly Kuznetsov 提交于
Glibc-2.30 gained gettid() wrapper, selftests fail to compile: lib/assert.c:58:14: error: static declaration of ‘gettid’ follows non-static declaration 58 | static pid_t gettid(void) | ^~~~~~ In file included from /usr/include/unistd.h:1170, from include/test_util.h:18, from lib/assert.c:10: /usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here 34 | extern __pid_t gettid (void) __THROW; | ^~~~~~ Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
If a huge page is recovered (and becomes no executable) while another thread is executing it, the resulting contention on mmu_lock can cause latency spikes. Disabling recovery for PREEMPT_RT kernels fixes this issue. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull kvm fixes from Paolo Bonzini: "Fix unwinding of KVM_CREATE_VM failure, VT-d posted interrupts, DAX/ZONE_DEVICE, and module unload/reload" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved KVM: VMX: Introduce pi_is_pir_empty() helper KVM: VMX: Do not change PID.NDST when loading a blocked vCPU KVM: VMX: Consider PID.PIR to determine if vCPU has pending interrupts KVM: VMX: Fix comment to specify PID.ON instead of PIR.ON KVM: X86: Fix initialization of MSR lists KVM: fix placement of refcount initialization KVM: Fix NULL-ptr deref after kvm_create_vm fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 TSX Async Abort and iTLB Multihit mitigations from Thomas Gleixner: "The performance deterioration departement is not proud at all of presenting the seventh installment of speculation mitigations and hardware misfeature workarounds: 1) TSX Async Abort (TAA) - 'The Annoying Affair' TAA is a hardware vulnerability that allows unprivileged speculative access to data which is available in various CPU internal buffers by using asynchronous aborts within an Intel TSX transactional region. The mitigation depends on a microcode update providing a new MSR which allows to disable TSX in the CPU. CPUs which have no microcode update can be mitigated by disabling TSX in the BIOS if the BIOS provides a tunable. Newer CPUs will have a bit set which indicates that the CPU is not vulnerable, but the MSR to disable TSX will be available nevertheless as it is an architected MSR. That means the kernel provides the ability to disable TSX on the kernel command line, which is useful as TSX is a truly useful mechanism to accelerate side channel attacks of all sorts. 2) iITLB Multihit (NX) - 'No eXcuses' iTLB Multihit is an erratum where some Intel processors may incur a machine check error, possibly resulting in an unrecoverable CPU lockup, when an instruction fetch hits multiple entries in the instruction TLB. This can occur when the page size is changed along with either the physical address or cache type. A malicious guest running on a virtualized system can exploit this erratum to perform a denial of service attack. The workaround is that KVM marks huge pages in the extended page tables as not executable (NX). If the guest attempts to execute in such a page, the page is broken down into 4k pages which are marked executable. The workaround comes with a mechanism to recover these shattered huge pages over time. Both issues come with full documentation in the hardware vulnerabilities section of the Linux kernel user's and administrator's guide. Thanks to all patch authors and reviewers who had the extraordinary priviledge to be exposed to this nuisance. Special thanks to Borislav Petkov for polishing the final TAA patch set and to Paolo Bonzini for shepherding the KVM iTLB workarounds and providing also the backports to stable kernels for those!" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation/taa: Fix printing of TAA_MSG_SMT on IBRS_ALL CPUs Documentation: Add ITLB_MULTIHIT documentation kvm: x86: mmu: Recovery of shattered NX large pages kvm: Add helper function for creating VM worker threads kvm: mmu: ITLB_MULTIHIT mitigation cpu/speculation: Uninline and export CPU mitigations helpers x86/cpu: Add Tremont to the cpu vulnerability whitelist x86/bugs: Add ITLB_MULTIHIT bug infrastructure x86/tsx: Add config options to set tsx=on|off|auto x86/speculation/taa: Add documentation for TSX Async Abort x86/tsx: Add "auto" option to the tsx= cmdline parameter kvm/x86: Export MDS_NO=0 to guests when TSX is enabled x86/speculation/taa: Add sysfs reporting for TSX Async Abort x86/speculation/taa: Add mitigation for TSX Async Abort x86/cpu: Add a "tsx=" cmdline option with TSX disabled by default x86/cpu: Add a helper function x86_read_arch_cap_msr() x86/msr: Add the IA32_TSX_CTRL MSR
-
- 12 11月, 2019 10 次提交
-
-
由 Sean Christopherson 提交于
Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and instead manually handle ZONE_DEVICE on a case-by-case basis. For things like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal pages, e.g. put pages grabbed via gup(). But for flows such as setting A/D bits or shifting refcounts for transparent huge pages, KVM needs to to avoid processing ZONE_DEVICE pages as the flows in question lack the underlying machinery for proper handling of ZONE_DEVICE pages. This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup() when running a KVM guest backed with /dev/dax memory, as KVM straight up doesn't put any references to ZONE_DEVICE pages acquired by gup(). Note, Dan Williams proposed an alternative solution of doing put_page() on ZONE_DEVICE pages immediately after gup() in order to simplify the auditing needed to ensure is_zone_device_page() is called if and only if the backing device is pinned (via gup()). But that approach would break kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til unmap() when accessing guest memory, unlike KVM's secondary MMU, which coordinates with mmu_notifier invalidations to avoid creating stale page references, i.e. doesn't rely on pages being pinned. [*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.plReported-by: NAdam Borowski <kilobyte@angband.pl> Analyzed-by: NDavid Hildenbrand <david@redhat.com> Acked-by: NDan Williams <dan.j.williams@intel.com> Cc: stable@vger.kernel.org Fixes: 3565fce3 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Joao Martins 提交于
Streamline the PID.PIR check and change its call sites to use the newly added helper. Suggested-by: NLiran Alon <liran.alon@oracle.com> Signed-off-by: NJoao Martins <joao.m.martins@oracle.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Joao Martins 提交于
When vCPU enters block phase, pi_pre_block() inserts vCPU to a per pCPU linked list of all vCPUs that are blocked on this pCPU. Afterwards, it changes PID.NV to POSTED_INTR_WAKEUP_VECTOR which its handler (wakeup_handler()) is responsible to kick (unblock) any vCPU on that linked list that now has pending posted interrupts. While vCPU is blocked (in kvm_vcpu_block()), it may be preempted which will cause vmx_vcpu_pi_put() to set PID.SN. If later the vCPU will be scheduled to run on a different pCPU, vmx_vcpu_pi_load() will clear PID.SN but will also *overwrite PID.NDST to this different pCPU*. Instead of keeping it with original pCPU which vCPU had entered block phase on. This results in an issue because when a posted interrupt is delivered, as the wakeup_handler() will be executed and fail to find blocked vCPU on its per pCPU linked list of all vCPUs that are blocked on this pCPU. Which is due to the vCPU being placed on a *different* per pCPU linked list i.e. the original pCPU in which it entered block phase. The regression is introduced by commit c112b5f5 ("KVM: x86: Recompute PID.ON when clearing PID.SN"). Therefore, partially revert it and reintroduce the condition in vmx_vcpu_pi_load() responsible for avoiding changing PID.NDST when loading a blocked vCPU. Fixes: c112b5f5 ("KVM: x86: Recompute PID.ON when clearing PID.SN") Tested-by: NNathan Ni <nathan.ni@oracle.com> Co-developed-by: NLiran Alon <liran.alon@oracle.com> Signed-off-by: NLiran Alon <liran.alon@oracle.com> Signed-off-by: NJoao Martins <joao.m.martins@oracle.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Joao Martins 提交于
Commit 17e433b5 ("KVM: Fix leak vCPU's VMCS value into other pCPU") introduced vmx_dy_apicv_has_pending_interrupt() in order to determine if a vCPU have a pending posted interrupt. This routine is used by kvm_vcpu_on_spin() when searching for a a new runnable vCPU to schedule on pCPU instead of a vCPU doing busy loop. vmx_dy_apicv_has_pending_interrupt() determines if a vCPU has a pending posted interrupt solely based on PID.ON. However, when a vCPU is preempted, vmx_vcpu_pi_put() sets PID.SN which cause raised posted interrupts to only set bit in PID.PIR without setting PID.ON (and without sending notification vector), as depicted in VT-d manual section 5.2.3 "Interrupt-Posting Hardware Operation". Therefore, checking PID.ON is insufficient to determine if a vCPU has pending posted interrupts and instead we should also check if there is some bit set on PID.PIR if PID.SN=1. Fixes: 17e433b5 ("KVM: Fix leak vCPU's VMCS value into other pCPU") Reviewed-by: NJagannathan Raman <jag.raman@oracle.com> Co-developed-by: NLiran Alon <liran.alon@oracle.com> Signed-off-by: NLiran Alon <liran.alon@oracle.com> Signed-off-by: NJoao Martins <joao.m.martins@oracle.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Liran Alon 提交于
The Outstanding Notification (ON) bit is part of the Posted Interrupt Descriptor (PID) as opposed to the Posted Interrupts Register (PIR). The latter is a bitmap for pending vectors. Reviewed-by: NJoao Martins <joao.m.martins@oracle.com> Signed-off-by: NLiran Alon <liran.alon@oracle.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Chenyi Qiang 提交于
The three MSR lists(msrs_to_save[], emulated_msrs[] and msr_based_features[]) are global arrays of kvm.ko, which are adjusted (copy supported MSRs forward to override the unsupported MSRs) when insmod kvm-{intel,amd}.ko, but it doesn't reset these three arrays to their initial value when rmmod kvm-{intel,amd}.ko. Thus, at the next installation, kvm-{intel,amd}.ko will do operations on the modified arrays with some MSRs lost and some MSRs duplicated. So define three constant arrays to hold the initial MSR lists and initialize msrs_to_save[], emulated_msrs[] and msr_based_features[] based on the constant arrays. Cc: stable@vger.kernel.org Reviewed-by: NXiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: NChenyi Qiang <chenyi.qiang@intel.com> [Remove now useless conditionals. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Linus Torvalds 提交于
This fixes two different classes of bugs in the Intel graphics hardware: MMIO register read hang: "On Intels Gen8 and Gen9 Graphics hardware, a read of specific graphics MMIO registers when the product is in certain low power states causes a system hang. There are two potential triggers for DoS: a) H/W corruption of the RC6 save/restore vector b) Hard hang within the MIPI hardware This prevents the DoS in two areas of the hardware: 1) Detect corruption of RC6 address on exit from low-power state, and if we find it corrupted, disable RC6 and RPM 2) Permanently lower the MIPI MMIO timeout" Blitter command streamer unrestricted memory accesses: "On Intels Gen9 Graphics hardware the Blitter Command Streamer (BCS) allows writing to Memory Mapped Input Output (MMIO) that should be blocked. With modifications of page tables, this can lead to privilege escalation. This exposure is limited to the Guest Physical Address space and does not allow for access outside of the graphics virtual machine. This series establishes a software parser into the Blitter command stream to scan for, and prevent, reads or writes to MMIO's that should not be accessible to non-privileged contexts. Much of the command parser infrastructure has existed for some time, and is used on Ivybridge/Haswell/Valleyview derived products to allow the use of features normally blocked by hardware. In this legacy context, the command parser is employed to allow normally unprivileged submissions to be run with elevated privileges in order to grant access to a limited set of extra capabilities. In this mode the parser is optional; In the event that the parser finds any construct that it cannot properly validate (e.g. nested command buffers), it simply aborts the scan and submits the buffer in non-privileged mode. For Gen9 Graphics, this series makes the parser mandatory for all Blitter submissions. The incoming user buffer is first copied to a kernel owned buffer, and parsed. If all checks are successful the kernel owned buffer is mapped READ-ONLY and submitted on behalf of the user. If any checks fail, or the parser is unable to complete the scan (nested buffers), it is forcibly rejected. The successfully scanned buffer is executed with NORMAL user privileges (key difference from legacy usage). Modern usermode does not use the Blitter on later hardware, having switched over to using the 3D engine instead for performance reasons. There are however some legacy usermode apps that rely on Blitter, notably the SNA X-Server. There are no known usermode applications that require nested command buffers on the Blitter, so the forcible rejection of such buffers in this patch series is considered an acceptable limitation" * Intel graphics fixes in emailed bundle from Jon Bloomfield <jon.bloomfield@intel.com>: drm/i915/cmdparser: Fix jump whitelist clearing drm/i915/gen8+: Add RC6 CTX corruption WA drm/i915: Lower RM timeout to avoid DSI hard hangs drm/i915/cmdparser: Ignore Length operands during command matching drm/i915/cmdparser: Add support for backward jumps drm/i915/cmdparser: Use explicit goto for error paths drm/i915: Add gen9 BCS cmdparsing drm/i915: Allow parsing of unsized batches drm/i915: Support ro ppgtt mapped cmdparser shadow buffers drm/i915: Add support for mandatory cmdparsing drm/i915: Remove Master tables from cmdparser drm/i915: Disable Secure Batches for gen6+ drm/i915: Rename gen7 cmdparser tables
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fix from Tejun Heo: "There's an inadvertent preemption point in ptrace_stop() which was reliably triggering for a test scenario significantly slowing it down. This contains Oleg's fix to remove the unwanted preemption point" * 'for-5.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: freezer: call cgroup_enter_frozen() with preemption disabled in ptrace_stop()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "Three small changes: two in the core and one in the qla2xxx driver. The sg_tablesize fix affects a thinko in the migration to blk-mq of certain legacy drivers which could cause an oops and the sd core change should only affect zoned block devices which were wrongly suppressing error messages for reset all zones" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Handle drivers which set sg_tablesize to zero scsi: qla2xxx: fix NPIV tear down process scsi: sd_zbc: Fix sd_zbc_complete()
-
由 Ben Hutchings 提交于
When a jump_whitelist bitmap is reused, it needs to be cleared. Currently this is done with memset() and the size calculation assumes bitmaps are made of 32-bit words, not longs. So on 64-bit architectures, only the first half of the bitmap is cleared. If some whitelist bits are carried over between successive batches submitted on the same context, this will presumably allow embedding the rogue instructions that we're trying to reject. Use bitmap_zero() instead, which gets the calculation right. Fixes: f8c08d8f ("drm/i915/cmdparser: Add support for backward jumps") Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NJon Bloomfield <jon.bloomfield@intel.com>
-
- 11 11月, 2019 15 次提交
-
-
由 Paolo Bonzini 提交于
Reported by syzkaller: ============================= WARNING: suspicious RCU usage ----------------------------- ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by repro_11/12688. stack backtrace: Call Trace: dump_stack+0x7d/0xc5 lockdep_rcu_suspicious+0x123/0x170 kvm_dev_ioctl+0x9a9/0x1260 [kvm] do_vfs_ioctl+0x1a1/0xfb0 ksys_ioctl+0x6d/0x80 __x64_sys_ioctl+0x73/0xb0 do_syscall_64+0x108/0xaa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Commit a97b0e77 (kvm: call kvm_arch_destroy_vm if vm creation fails) sets users_count to 1 before kvm_arch_init_vm(), however, if kvm_arch_init_vm() fails, we need to decrease this count. By moving it earlier, we can push the decrease to out_err_no_arch_destroy_vm without introducing yet another error label. syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=15209b84e00000 Reported-by: syzbot+75475908cd0910f141ee@syzkaller.appspotmail.com Fixes: a97b0e77 ("kvm: call kvm_arch_destroy_vm if vm creation fails") Cc: Jim Mattson <jmattson@google.com> Analyzed-by: NWanpeng Li <wanpengli@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Reported by syzkaller: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 14727 Comm: syz-executor.3 Not tainted 5.4.0-rc4+ #0 RIP: 0010:kvm_coalesced_mmio_init+0x5d/0x110 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:121 Call Trace: kvm_dev_ioctl_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:3446 [inline] kvm_dev_ioctl+0x781/0x1490 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3494 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x196/0x1150 fs/ioctl.c:696 ksys_ioctl+0x62/0x90 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x6e/0xb0 fs/ioctl.c:718 do_syscall_64+0xca/0x5d0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Commit 9121923c ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm") moves memslots and buses allocations around, however, if kvm->srcu/irq_srcu fails initialization, NULL will be returned instead of error code, NULL will not be intercepted in kvm_dev_ioctl_create_vm() and be dereferenced by kvm_coalesced_mmio_init(), this patch fixes it. Moving the initialization is required anyway to avoid an incorrect synchronize_srcu that was also reported by syzkaller: wait_for_completion+0x29c/0x440 kernel/sched/completion.c:136 __synchronize_srcu+0x197/0x250 kernel/rcu/srcutree.c:921 synchronize_srcu_expedited kernel/rcu/srcutree.c:946 [inline] synchronize_srcu+0x239/0x3e8 kernel/rcu/srcutree.c:997 kvm_page_track_unregister_notifier+0xe7/0x130 arch/x86/kvm/page_track.c:212 kvm_mmu_uninit_vm+0x1e/0x30 arch/x86/kvm/mmu.c:5828 kvm_arch_destroy_vm+0x4a2/0x5f0 arch/x86/kvm/x86.c:9579 kvm_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:702 [inline] so do it. Reported-by: syzbot+89a8060879fa0bd2db4f@syzkaller.appspotmail.com Reported-by: syzbot+e27e7027eb2b80e44225@syzkaller.appspotmail.com Fixes: 9121923c ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm") Cc: Jim Mattson <jmattson@google.com> Cc: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A set of fixes that have trickled in over the last couple of weeks: - MAINTAINER update for Cavium/Marvell ThunderX2 - stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for CAN interfaces - i.MX fixes for voltage regulator GPIO mappings, fixes voltage scaling issues - More i.MX fixes for various issues on i.MX eval boards: interrupt storm due to u-boot leaving pins in new states, fixing power button config, a couple of compatible-string corrections. - Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets - A few documentation tweaks and a fix of a memory leak in the reset subsystem" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: update Cavium ThunderX2 maintainers ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 arm64: dts: zii-ultra: fix ARM regulator GPIO handle ARM: sunxi: Fix CPU powerdown on A83T ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend arm64: dts: imx8mn: fix compatible string for sdma arm64: dts: imx8mm: fix compatible string for sdma reset: fix reset_control_ops kerneldoc comment ARM: dts: imx6-logicpd: Re-enable SNVS power key soc: imx: gpc: fix initialiser format ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts arm64: dts: ls1028a: fix a compatible issue reset: fix reset_control_get_exclusive kerneldoc comment reset: fix reset_control_lookup kerneldoc comment reset: fix of_reset_control_get_count kerneldoc comment reset: fix of_reset_simple_xlate kerneldoc comment reset: Fix memory leak in reset_control_array_put()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull IIO fixes and staging driver from Greg KH: "Here is a mix of a number of IIO driver fixes for 5.4-rc7, and a whole new staging driver. The IIO fixes resolve some reported issues, all are tiny. The staging driver addition is the vboxsf filesystem, which is the VirtualBox guest shared folder code. Hans has been trying to get filesystem reviewers to review the code for many months now, and Christoph finally said to just merge it in staging now as it is stand-alone and the filesystem people can review it easier over time that way. I know it's late for this big of an addition, but it is stand-alone. The code has been in linux-next for a while, long enough to pick up a few tiny fixes for it already so people are looking at it. All of these have been in linux-next with no reported issues" * tag 'staging-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: Fix error return code in vboxsf_fill_super() staging: vboxsf: fix dereference of pointer dentry before it is null checked staging: vboxsf: Remove unused including <linux/version.h> staging: Add VirtualBox guest shared folder (vboxsf) support iio: adc: stm32-adc: fix stopping dma iio: imu: inv_mpu6050: fix no data on MPU6050 iio: srf04: fix wrong limitation in distance measuring iio: imu: adis16480: make sure provided frequency is positive
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc driver fixes from Greg KH: "Here are a number of late-arrival driver fixes for issues reported for some char/misc drivers for 5.4-rc7 These all come from the different subsystem/driver maintainers as things that they had reports for and wanted to see fixed. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: intel_th: pci: Add Jasper Lake PCH support intel_th: pci: Add Comet Lake PCH support intel_th: msu: Fix possible memory leak in mode_store() intel_th: msu: Fix overflow in shift of an unsigned int intel_th: msu: Fix missing allocation failure check on a kstrndup intel_th: msu: Fix an uninitialized mutex intel_th: gth: Fix the window switching sequence soundwire: slave: fix scanf format soundwire: intel: fix intel_register_dai PDI offsets and numbers interconnect: Add locking in icc_set_tag() interconnect: qcom: Fix icc_onecell_data allocation soundwire: depend on ACPI || OF soundwire: depend on ACPI thunderbolt: Drop unnecessary read when writing LC command in Ice Lake thunderbolt: Fix lockdep circular locking depedency warning thunderbolt: Read DP IN adapter first two dwords in one go
-
git://git.infradead.org/users/hch/configfs由 Linus Torvalds 提交于
Pull configfs regression fix from Christoph Hellwig: "Fix a regression from this merge window in the configfs symlink handling (Honggang Li)" * tag 'configfs-for-5.4-2' of git://git.infradead.org/users/hch/configfs: configfs: calculate the depth of parent item
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "A small set of fixes for x86: - Make the tsc=reliable/nowatchdog command line parameter work again. It was broken with the introduction of the early TSC clocksource. - Prevent the evaluation of exception stacks before they are set up. This causes a crash in dumpstack because the stack walk termination gets screwed up. - Prevent a NULL pointer dereference in the rescource control file system. - Avoid bogus warnings about APIC id mismatch related to the LDR which can happen when the LDR is not in use and therefore not initialized. Only evaluate that when the APIC is in logical destination mode" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Respect tsc command line paraemeter for clocksource_tsc_early x86/dumpstack/64: Don't evaluate exception stacks before setup x86/apic/32: Avoid bogus LDR warnings x86/resctrl: Prevent NULL pointer dereference when reading mondata
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Thomas Gleixner: "A small set of fixes for timekeepoing and clocksource drivers: - VDSO data was updated conditional on the availability of a VDSO capable clocksource. This causes the VDSO functions which do not depend on a VDSO capable clocksource to operate on stale data. Always update unconditionally. - Prevent a double free in the mediatek driver - Use the proper helper in the sh_mtu2 driver so it won't attempt to initialize non-existing interrupts" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping/vsyscall: Update VDSO data unconditionally clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name() clocksource/drivers/mediatek: Fix error handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Thomas Gleixner: "Two fixes for scheduler regressions: - Plug a subtle race condition which was introduced with the rework of the next task selection functionality. The change of task properties became unprotected which can be observed inconsistently causing state corruption. - A trivial compile fix for CONFIG_CGROUPS=n" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix pick_next_task() vs 'change' pattern race sched/core: Fix compilation error when cgroup not selected
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf tooling fixes from Thomas Gleixner: - Fix the time sorting algorithm which was broken due to truncation of big numbers - Fix the python script generator fail caused by a broken tracepoint array iterator * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix time sorting perf tools: Remove unused trace_find_next_event() perf scripting engines: Iterate on tep event arrays directly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixlet from Thomas Gleixner: "A trivial fix for a kernel doc regression where an argument change was not reflected in the documentation" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull stacktrace fix from Thomas Gleixner: "A small fix for a stacktrace regression. Saving a stacktrace for a foreign task skipped an extra entry which makes e.g. the output of /proc/$PID/stack incomplete" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: stacktrace: Don't skip first entry on noncurrent tasks
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fix from Steve French: "Small fix for an smb3 reconnect bug (also marked for stable)" * tag '5.4-rc7-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Fix persistent handles reconnect
-
由 Corentin Labbe 提交于
config option GENERIC_IO was removed but still selected by lib/kconfig This patch finish the cleaning. Fixes: 9de8da47 ("kconfig: kill off GENERIC_IO option") Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NCorentin Labbe <clabbe@baylibre.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 11月, 2019 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control fixes from Linus Walleij: - Fix glitch risks in the Intel GPIO - Fix the Intel Cherryview valid irq mask calculation. - Allocate the Intel Cherryview irqchip dynamically. - Fix the valid mask init sequency on the ST STMFX driver. * tag 'pinctrl-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: stmfx: fix valid_mask init sequence pinctrl: cherryview: Allocate IRQ chip dynamic pinctrl: cherryview: Fix irq_valid_mask calculation pinctrl: intel: Avoid potential glitches if pin is in GPIO mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux由 Linus Torvalds 提交于
Pull btrfs fixes from David Sterba: "A few regressions and fixes for stable. Regressions: - fix a race leading to metadata space leak after task received a signal - un-deprecate 2 ioctls, marked as deprecated by mistake Fixes: - fix limit check for number of devices during chunk allocation - fix a race due to double evaluation of i_size_read inside max() macro, can cause a crash - remove wrong device id check in tree-checker" * tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: un-deprecate ioctls START_SYNC and WAIT_SYNC btrfs: save i_size to avoid double evaluation of i_size_read in compress_file_range Btrfs: fix race leading to metadata space leak after task received signal btrfs: tree-checker: Fix wrong check on max devid btrfs: Consider system chunk array size for new SYSTEM chunks
-
git://www.linux-watchdog.org/linux-watchdog由 Linus Torvalds 提交于
Pull watchdog fixes from Wim Van Sebroeck: - cpwd: fix build regression - pm8916_wdt: fix pretimeout registration flow - meson: Fix the wrong value of left time - imx_sc_wdt: Pretimeout should follow SCU firmware format - bd70528: Add MODULE_ALIAS to allow module auto loading * tag 'linux-watchdog-5.4-rc7' of git://www.linux-watchdog.org/linux-watchdog: watchdog: bd70528: Add MODULE_ALIAS to allow module auto loading watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware format watchdog: meson: Fix the wrong value of left time watchdog: pm8916_wdt: fix pretimeout registration flow watchdog: cpwd: fix build regression
-
- 09 11月, 2019 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) BPF sample build fixes from Björn Töpel 2) Fix powerpc bpf tail call implementation, from Eric Dumazet. 3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet. 4) Fix crash in ebtables when using dnat target, from Florian Westphal. 5) Fix port disable handling whne removing bcm_sf2 driver, from Florian Fainelli. 6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski. 7) Various KCSAN fixes all over the networking, from Eric Dumazet. 8) Memory leaks in mlx5 driver, from Alex Vesker. 9) SMC interface refcounting fix, from Ursula Braun. 10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu. 11) Add a TX lock to synchonize the kTLS TX path properly with crypto operations. From Jakub Kicinski. 12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano Garzarella. 13) Infinite loop in Intel ice driver, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits) ixgbe: need_wakeup flag might not be set for Tx i40e: need_wakeup flag might not be set for Tx igb/igc: use ktime accessors for skb->tstamp i40e: Fix for ethtool -m issue on X722 NIC iavf: initialize ITRN registers with correct values ice: fix potential infinite loop because loop counter being too small qede: fix NULL pointer deref in __qede_remove() net: fix data-race in neigh_event_send() vsock/virtio: fix sock refcnt holding during the shutdown net: ethernet: octeon_mgmt: Account for second possible VLAN header mac80211: fix station inactive_time shortly after boot net/fq_impl: Switch to kvmalloc() for memory allocation mac80211: fix ieee80211_txq_setup_flows() failure path ipv4: Fix table id reference in fib_sync_down_addr ipv6: fixes rt6_probe() and fib6_nh->last_probe init net: hns: Fix the stray netpoll locks causing deadlock in NAPI path net: usb: qmi_wwan: add support for DW5821e with eSIM support CDC-NCM: handle incomplete transfer of MTU nfc: netlink: fix double device reference drop NFC: st21nfca: fix double free ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: - Two NVMe device removal crash fixes, and a compat fixup for for an ioctl that was introduced in this release (Anton, Charles, Max - via Keith) - Missing error path mutex unlock for drbd (Dan) - cgroup writeback fixup on dead memcg (Tejun) - blkcg online stats print fix (Tejun) * tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block: cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead block: drbd: remove a stray unlock in __drbd_send_protocol() blkcg: make blkcg_print_stat() print stats only for online blkgs nvme: change nvme_passthru_cmd64 to explicitly mark rsvd nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths nvme-rdma: fix a segmentation fault during module unload
-