- 21 4月, 2016 5 次提交
-
-
由 Anju T 提交于
Map ID values with corresponding register names. These names are then displayed when user issues perf record with the -I option followed by perf report/script with -D option. To test this patchset, Eg: $ perf record -I ls # record machine state at interrupt $ perf script -D # read the perf.data file Sample output obtained for this patch / output looks like as follows: 496768515470 0x1988 [0x188]: PERF_RECORD_SAMPLE(IP, 0x1): 4522/4522: 0xc0000000001e538c period: 1 addr: 0 ... intr regs: mask 0x7ffffffffff ABI 64-bit .... r0 0xc0000000001e5e34 .... r1 0xc000000fe733f9a0 .... r2 0xc000000001523100 .... r3 0xc000000ffaadeb60 .... r4 0xc000000003456800 .... r5 0x73a9b5e000 .... r6 0x1e000000 .... r7 0x0 .... r8 0x0 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0x24022822 .... r13 0xc00000000feec180 .... r14 0x0 .... r15 0xc000001e4be18800 .... r16 0x0 .... r17 0xc000000ffaac5000 .... r18 0xc000000fe733f8a0 .... r19 0xc000000001523100 .... r20 0xc00000000009fd1c .... r21 0xc000000fcaa69000 .... r22 0xc0000000001e4968 .... r23 0xc000000001523100 .... r24 0xc000000fe733f850 .... r25 0xc000000fcaa69000 .... r26 0xc000000003b8fcf0 .... r27 0xfffffffffffffead .... r28 0x0 .... r29 0xc000000fcaa69000 .... r30 0x1 .... r31 0x0 .... nip 0xc0000000001dd320 .... msr 0x9000000000009032 .... orig_r3 0xc0000000001e538c .... ctr 0xc00000000009d550 .... link 0xc0000000001e5e34 .... xer 0x0 .... ccr 0x84022882 .... softe 0x0 .... trap 0xf01 .... dar 0x0 .... dsisr 0xf00040060000004 ... thread: :4522:4522 ...... dso: /root/.debug/.build-id/b0/ef11b1a1629e62ac9de75199117ee5ef9469e9 :4522 4522 496.768515: 1 cycles: c0000000001e538c .perf_event_context_sched_in (/boot/vmlinux) Signed-off-by: NAnju T <anju@linux.vnet.ibm.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anju T 提交于
The perf infrastructure uses a bit mask to find out valid registers to display. Define a register mask for supported registers defined in uapi/asm/perf_regs.h. The bit positions also correspond to register IDs which is used by perf infrastructure to fetch the register values. CONFIG_HAVE_PERF_REGS enables sampling of the interrupted machine state. Signed-off-by: NAnju T <anju@linux.vnet.ibm.com> [mpe: Add license, use CONFIG_PPC64, fix 32-bit build] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anju T 提交于
The enum definition assigns an 'id' to each register in "struct pt_regs" of arch/powerpc. The order of these values in the enum definition are based on the order of members in pt_regs. Signed-off-by: NAnju T <anju@linux.vnet.ibm.com> [mpe: Rename LNK to LINK, use _UAPI_ASM for include guards] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Hari Bathini 提交于
The __end_handlers marker was intended to mark down upto code that gets called from exception prologs. But that hasn't kept pace with code changes. Case in point, slb_miss_realmode being called from exception prolog code but isn't below __end_handlers marker. So, __end_handlers marker is as good as a comment but could be misleading at times if it isn't in sync with the code, as is the case now. So, let us avoid this confusion by having a better comment and removing __end_handlers marker altogether. Signed-off-by: NHari Bathini <hbathini@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Hari Bathini 提交于
Some of the interrupt vectors on 64-bit POWER server processors are only 32 bytes long (8 instructions), which is not enough for the full first-level interrupt handler. For these we need to branch to an out-of-line (OOL) handler. But when we are running a relocatable kernel, interrupt vectors till __end_interrupts marker are copied down to real address 0x100. So, branching to labels (ie. OOL handlers) outside this section must be handled differently (see LOAD_HANDLER()), considering relocatable kernel, which would need at least 4 instructions. However, branching from interrupt vector means that we corrupt the CFAR (come-from address register) on POWER7 and later processors as mentioned in commit 1707dd16. So, EXCEPTION_PROLOG_0 (6 instructions) that contains the part up to the point where the CFAR is saved in the PACA should be part of the short interrupt vectors before we branch out to OOL handlers. But as mentioned already, there are interrupt vectors on 64-bit POWER server processors that are only 32 bytes long (like vectors 0x4f00, 0x4f20, etc.), which cannot accomodate the above two cases at the same time owing to space constraint. Currently, in these interrupt vectors, we simply branch out to OOL handlers, without using LOAD_HANDLER(), which leaves us vulnerable when running a relocatable kernel (eg. kdump case). While this has been the case for sometime now and kdump is used widely, we were fortunate not to see any problems so far, for three reasons: 1. In almost all cases, production kernel (relocatable) is used for kdump as well, which would mean that crashed kernel's OOL handler would be at the same place where we end up branching to, from short interrupt vector of kdump kernel. 2. Also, OOL handler was unlikely the reason for crash in almost all the kdump scenarios, which meant we had a sane OOL handler from crashed kernel that we branched to. 3. On most 64-bit POWER server processors, page size is large enough that marking interrupt vector code as executable (see commit 429d2e83) leads to marking OOL handler code from crashed kernel, that sits right below interrupt vector code from kdump kernel, as executable as well. Let us fix this by moving the __end_interrupts marker down past OOL handlers to make sure that we also copy OOL handlers to real address 0x100 when running a relocatable kernel. This fix has been tested successfully in kdump scenario, on an LPAR with 4K page size by using different default/production kernel and kdump kernel. Also tested by manually corrupting the OOL handlers in the first kernel and then kdump'ing, and then causing the OOL handlers to fire - mpe. Fixes: c1fb6816 ("powerpc: Add relocation on exception vector handlers") Cc: stable@vger.kernel.org Signed-off-by: NHari Bathini <hbathini@linux.vnet.ibm.com> Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 18 4月, 2016 1 次提交
-
-
由 Michael Ellerman 提交于
Merge the support for live patching on ppc64le using mprofile-kernel. This branch has also been merged into the livepatching tree for v4.7.
-
- 14 4月, 2016 5 次提交
-
-
由 Michael Ellerman 提交于
Add the kconfig logic & assembly support for handling live patched functions. This depends on DYNAMIC_FTRACE_WITH_REGS, which in turn depends on the new -mprofile-kernel ftrace ABI, which is only supported currently on ppc64le. Live patching is handled by a special ftrace handler. This means it runs from ftrace_caller(). The live patch handler modifies the NIP so as to redirect the return from ftrace_caller() to the new patched function. However there is one particularly tricky case we need to handle. If a function A calls another function B, and it is known at link time that they share the same TOC, then A will not save or restore its TOC, and will call the local entry point of B. When we live patch B, we replace it with a new function C, which may not have the same TOC as A. At live patch time it's too late to modify A to do the TOC save/restore, so the live patching code must interpose itself between A and C, and do the TOC save/restore that A omitted. An additionaly complication is that the livepatch code can not create a stack frame in order to save the TOC. That is because if C takes > 8 arguments, or is varargs, A will have written the arguments for C in A's stack frame. To solve this, we introduce a "livepatch stack" which grows upward from the base of the regular stack, and is used to store the TOC & LR when calling a live patched function. When the patched function returns, we retrieve the real LR & TOC from the livepatch stack, restore them, and pop the livepatch "stack frame". Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NTorsten Duwe <duwe@suse.de> Reviewed-by: NBalbir Singh <bsingharora@gmail.com>
-
由 Michael Ellerman 提交于
In order to support live patching we need to maintain an alternate stack of TOC & LR values. We use the base of the stack for this, and store the "live patch stack pointer" in struct thread_info. Unlike the other fields of thread_info, we can not statically initialise that value, so it must be done at run time. This patch just adds the code to support that, it is not enabled until the next patch which actually adds live patch support. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Acked-by: NBalbir Singh <bsingharora@gmail.com>
-
由 Michael Ellerman 提交于
Add the powerpc specific livepatch definitions. In particular we provide a non-default implementation of klp_get_ftrace_location(). This is required because the location of the mcount call is not constant when using -mprofile-kernel (which we always do for live patching). Signed-off-by: NTorsten Duwe <duwe@suse.de> Signed-off-by: NBalbir Singh <bsingharora@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
When livepatch tries to patch a function it takes the function address and asks ftrace to install the livepatch handler at that location. ftrace will look for an mcount call site at that exact address. On powerpc the mcount location is not the first instruction of the function, and in fact it's not at a constant offset from the start of the function. To accommodate this add a hook which arch code can override to customise the behaviour. Signed-off-by: NTorsten Duwe <duwe@suse.de> Signed-off-by: NBalbir Singh <bsingharora@gmail.com> Signed-off-by: NPetr Mladek <pmladek@suse.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
In order to support live patching on powerpc we would like to call ftrace_location_range(), so make it global. Signed-off-by: NTorsten Duwe <duwe@suse.de> Signed-off-by: NBalbir Singh <bsingharora@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 12 4月, 2016 5 次提交
-
-
由 Markus Elfring 提交于
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aaro Koskinen 提交于
Fix bogus memsets pointed out by sparse: linux-v4.3/drivers/macintosh/rack-meter.c:157:15: warning: memset with byte count of 0 linux-v4.3/drivers/macintosh/rack-meter.c:158:15: warning: memset with byte count of 0 Probably "&" is mistyped "*"; use ARRAY_SIZE to make it more safe. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aaro Koskinen 提交于
Limit idle ticks to total ticks. This prevents the annoying rackmeter leds fully ON / OFF blinking state that happens on fully idling G5 Xserve systems. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Daniel Axtens 提交于
Sometimes when sparse warns about undefined symbols, it isn't because they should have 'static' added, it's because they're overriding __weak symbols defined elsewhere, and the header has been missed. Fix a few of them by adding appropriate headers. Signed-off-by: NDaniel Axtens <dja@axtens.net> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Daniel Axtens 提交于
As sparse suggests, these should be made static. Signed-off-by: NDaniel Axtens <dja@axtens.net> Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: NStewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 11 4月, 2016 22 次提交
-
-
由 Philippe Bergheaud 提交于
The POWER8NVL chip has two CAPI ports. Configure the PSL to route data to the port corresponding to the CAPP unit. Signed-off-by: NPhilippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Philippe Bergheaud 提交于
Signed-off-by: NPhilippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Vipin K Parashar 提交于
This patch assigns numbers to OPAL_MSG macros of enum opal_msg_type to prevent accidental insertion of any new value in between and thus break OPAL API. This is also helpful while backporting mainline kernel changes to distros which run downlevel kernel and thus don't have all OPAL messages defined, avoiding unnecessary bugs due to enum values order mismatch. Signed-off-by: NVipin K Parashar <vipin@linux.vnet.ibm.com> Acked-by: NStewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
We'd like folks working on drivers for powerpc to also Cc linuxppc-dev, so we can be aware of what's going on in drivers and/or review the changes. So add patterns to the powerpc MAINTAINERS section to catch some of the drivers we're interested in. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Russell Currey 提交于
If CONFIG_HIBERNATION and CONFIG_PPC_BOOK3S_64 are set, code in arch/powerpc/kernel/swsusp_amd64.S which uses the tlbia macro is enabled. tlbia in turn uses tlbie, an instruction which takes more than one operand in newer versions of POWER. As such, the kernel fails to build due to the assembler complaining about missing operands. This can be worked around by assembling the instruction as in POWER4. This fixes the build breakage caused by enabling CONFIG_HIBERNATION. Hibernation is currently only tested on G5 PowerMacs, which should be unaffected by this change. For other platforms it may now build, whether or not it works is a different story. Signed-off-by: NRussell Currey <ruscur@russell.cc> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Rashmica Gupta 提交于
Currently on PPC64 changing kernel pagesize from 4K to 64K leaves FORCE_MAX_ZONEORDER set to 13 - which produces a compile error. The error occurs because of the following constraint (from include/linux/mmzone.h) being violated: MAX_ORDER -1 + PAGESHIFT <= SECTION_SIZE_BITS. Expanding this out, we get: FORCE_MAX_ZONEBITS <= 25 - PAGESHIFT, which requires, for a 64K page, FORCE_MAX_ZONEBITS <= 9. Thus set max value of FORCE_MAX_ZONEORDER for 64K pages to 9, and 4K pages to 13. Also, check the minimum value: In include/linux/huge_mm.h, we have the constraint HPAGE_PMD_ORDER < MAX_ORDER which expands out to: PTE_INDEX_SIZE < FORCE_MAX_ZONEORDER. PTE_INDEX_SIZE is: 9 (4k hash or no hash 4K pgtable) or 8 (64K hash or no hash 64K pgtable). Thus a min value of 8 for 64K pages and 9 for 4K pages is reasonable. So, update the range of FORCE_MAX_ZONEORDER from 9-64 to 8-9 for 64K pages and from 13-64 to 9-13 for 4K pages. Signed-off-by: NRashmica Gupta <rashmicy@gmail.com> Reviewed-by: NBalbir Singh <bsingharora@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Paul Gortmaker 提交于
The Kconfig for this driver is currently: config CPU_FREQ_CBE_PMI bool "CBE frequency scaling using PMI interface" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular and unused code here, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Christian Krafft <krafft@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-pm@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Paul Gortmaker 提交于
The Makefile/Kconfig currently controlling compilation of this code is: obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ signal_64.o ptrace32.o \ paca.o nvram_64.o firmware.o arch/powerpc/platforms/Kconfig.cputype:config PPC64 arch/powerpc/platforms/Kconfig.cputype: bool "64-bit kernel" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. We delete the MODULE_LICENSE tag since that information is already contained at the top of the file in the comments. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Anton Blanchard <anton@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Paul Gortmaker 提交于
The Kconfig currently controlling compilation of this code is: arch/powerpc/platforms/cell/Kconfig:config SPU_BASE arch/powerpc/platforms/cell/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Russell Currey 提交于
IBM online documentation for EEH uses "extended error handling" and "enhanced error handling" to refer to the same thing, in different places. The only place mentioning it as "enhanced error handling" in the kernel is the MAINTAINERS file, and it's "extended" in some documentation. IBM originally defined EEH as "enhanced error handling", so standardise all mentions of EEH to use that term. Signed-off-by: NRussell Currey <ruscur@russell.cc> Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
generic_memcpy() is only called from copy_32.S, so there's no reason for it to be global. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
This has been unused since ~2004, remove it. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
We have a bunch of SLB related code in the tree which is there to handle dynamic VSIDs - but currently it's all disabled at compile time. The comments say "Keep that around for when we re-implement dynamic VSIDs". But that was over 10 years ago (commit 3c726f8d ("[PATCH] ppc64: support 64k pages")). The chance that it would still work unchanged is minimal, and in the meantime it's confusing to folks browsing/grepping the code. If we ever want to re-instate it, it's in the git history. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Acked-by: NBalbir Singh <bsingharora@gmail.com>
-
由 Russell Currey 提交于
The HMI code knows about three types of errors: CORE, NX and UNKNOWN. If OPAL were to add a new type, it would not be handled at all since there is no fallback case. Instead of explicitly checking for UNKNOWN, treat any checkstop type without a handler as unknown. Signed-off-by: NRussell Currey <ruscur@russell.cc> Reviewed-by: NDaniel Axtens <dja@axtens.net> Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Frederic Barrat 提交于
Function cxl_get_phys_dev() was removed from the kernel API by a previous patch, but it's actually dead code. Remove it. Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Nathan Fontenot 提交于
The associativity array index specified for a LMB in the device tree, /ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory, needs to be updated prior to DLPAR adding a LMB and after DLPAR removing a LMB. Without doing this step in the DLPAR add process a LMB could be configured with the incorrect affinity. For a LMB that was not present at boot the affinity index is set to 0xffffffff, which defaults to adding the LMB to the first online node since the index is not a valid value. Or, the affinity index could contain a stale value if the LMB was present at boot but later DLPAR removed and is being DLPAR added back to the system. This patch adds a step in the DLPAR add flow to look up the associativity index for a LMB prior to adding a LMB and setting the associativity to 0xffffffff when a LMB is removed. This patch also modifies the DLPAR add/remove flow to no longer do a single update of the device tree property after all of the requested DLPAR operations are complete and now does a property update during the add or remove of each LMB. Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Nathan Fontenot 提交于
Re-factor dlpar_lmb_add() routine by moving the validation of the lmb flags and the acquireing of the DRC to a wrapper around the work to add the memory to the system. This is done to make handling of errors during the addition of the memory easier and to facilitate the upcoming addition of updating the lmb's affinity prior to adding the memory. Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Linus Torvalds 提交于
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "A couple of small fixes, and wiring up the new syscalls which appeared during the merge window" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8550/1: protect idiv patching against undefined gcc behavior ARM: wire up preadv2 and pwritev2 syscalls ARM: SMP enable of cache maintanence broadcast
-
git://git.linaro.org/people/ulf.hansson/mmc由 Linus Torvalds 提交于
Pull MMC fixes from Ulf Hansson: "Here are a couple of mmc fixes intended for v4.6 rc3: MMC host: - sdhci: Fix regression setting power on Trats2 board - sdhci-pci: Add support and PCI IDs for more Broxton host controllers" * tag 'mmc-v4.6-rc1' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers mmc: sdhci: Fix regression setting power on Trats2 board
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Some bugfixes from I2C: - fix a uevent triggered boot problem by removing a useless debug print - fix sysfs-attributes of the new i2c-demux-pinctrl driver to follow standard kernel behaviour - fix a potential division-by-zero error (needed two takes)" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: jz4780: really prevent potential division by zero Revert "i2c: jz4780: prevent potential division by zero" i2c: jz4780: prevent potential division by zero i2c: mux: demux-pinctrl: Update docs to new sysfs-attributes i2c: mux: demux-pinctrl: Clean up sysfs attributes i2c: prevent endless uevent loop with CONFIG_I2C_DEBUG_CORE
-
由 Linus Torvalds 提交于
This reverts commit 1028b55b. It's broken: it makes ext4 return an error at an invalid point, causing the readdir wrappers to write the the position of the last successful directory entry into the position field, which means that the next readdir will now return that last successful entry _again_. You can only return fatal errors (that terminate the readdir directory walk) from within the filesystem readdir functions, the "normal" errors (that happen when the readdir buffer fills up, for example) happen in the iterorator where we know the position of the actual failing entry. I do have a very different patch that does the "signal_pending()" handling inside the iterator function where it is allowable, but while that one passes all the sanity checks, I screwed up something like four times while emailing it out, so I'm not going to commit it today. So my track record is not good enough, and the stars will have to align better before that one gets committed. And it would be good to get some review too, of course, since celestial alignments are always an iffy debugging model. IOW, let's just revert the commit that caused the problem for now. Reported-by: NGreg Thelen <gthelen@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 4月, 2016 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: "Since commit 0de79858 ("parisc: Use generic extable search and sort routines") module loading is boken on parisc, because the parisc module loader wasn't prepared for the new R_PARISC_PCREL32 relocations. In addition, due to that breakage, Mikulas Patocka noticed that handling exceptions from modules probably never worked on parisc. It was just masked by the fact that exceptions from modules don't happen during normal use. This patch series fixes those issues and survives the tests of the lib/test_user_copy kernel module test. Some patches are tagged for stable" * 'parisc-4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Update comment regarding relative extable support parisc: Unbreak handling exceptions from kernel modules parisc: Fix kernel crash with reversed copy_from_user() parisc: Avoid function pointers for kernel exception routines parisc: Handle R_PARISC_PCREL32 relocations in kernel modules
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: "Three fixes, the first two are tagged for -stable: - The ndctl utility/library gained expanded unit tests illuminating a long standing bug in the libnvdimm SMART data retrieval implementation. It has been broken since its initial implementation, now fixed. - Another one line fix for the detection of stale info blocks. Without this change userspace can get into a situation where it is unable to reconfigure a namespace. - Fix the badblock initialization path in the presence of the new (in v4.6-rc1) section alignment workarounds. Without this change badblocks will be reported at the wrong offset. These have received a build success report from the kbuild robot and have appeared in -next with no reported issues" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, pfn: fix nvdimm_namespace_add_poison() vs section alignment libnvdimm, pfn: fix uuid validation libnvdimm: fix smart data retrieval
-