- 30 10月, 2016 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging and IIO driver fixes from Greg KH: "Here are some small staging and iio driver fixes for reported issues for 4.9-rc3. Nothing major, the "largest" being a lustre fix for a sysfs file that was obviously wrong, and had never been tested, so it was moved to debugfs as that is where it belongs. The others are small bug fixes for reported issues with various staging or iio drivers. All have been in linux-next for a while with no reported issues" * tag 'staging-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: greybus: fix a leak on error in gb_module_create() greybus: es2: fix error return code in ap_probe() greybus: arche-platform: Add missing of_node_put() in arche_platform_change_state() staging: android: ion: Fix error handling in ion_query_heaps() iio: accel: sca3000_core: avoid potentially uninitialized variable iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value staging/lustre/llite: Move unstable_stats from sysfs to debugfs Staging: wilc1000: Fix kernel Oops on opening the device staging: android/ion: testing the wrong variable Staging: greybus: uart: Use gbphy_dev->dev instead of bundle->dev Staging: greybus: gpio: Use gbphy_dev->dev instead of bundle->dev iio: adc: ti-adc081c: Select IIO_TRIGGERED_BUFFER to prevent build errors iio: maxim_thermocouple: Align 16 bit big endian value of raw reads
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty and serial driver fixes for reported issues for 4.9-rc3. Nothing major, but they do resolve a bunch of problems with the tty core changes that are in 4.9-rc1, and finally the atmel serial driver is back working properly. All have been in linux-next with no reported issues" * tag 'tty-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial_core: fix NULL struct tty pointer access in uart_write_wakeup tty: serial_core: Fix serial console crash on port shutdown tty/serial: at91: fix hardware handshake on Atmel platforms vt: clear selection before resizing sc16is7xx: always write state when configuring GPIO as an output sh-sci: document R8A7743/5 support tty: serial: 8250: 8250_core: NXP SC16C2552 workaround tty: limit terminal size to 4M chars tty: serial: fsl_lpuart: Fix Tx DMA edge case serial: 8250_lpss: enable MSI for sure serial: core: fix console problems on uart_close serial: 8250_uniphier: fix clearing divisor latch access bit serial: 8250_uniphier: fix more unterminated string serial: pch_uart: add terminate entry for dmi_system_id tables devicetree: bindings: uart: Add new compatible string for ZynqMP serial: xuartps: Add new compatible string for ZynqMP serial: SERIAL_STM32 should depend on HAS_DMA serial: stm32: Fix comparisons with undefined register tty: vt, fix bogus division in csi_J
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 4.9-rc3. There is the usual number of gadget and xhci patches in here to resolved reported issues, as well as some usb-serial driver fixes and new device ids. All have been in linux-next with no reported issues" * tag 'usb-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) usb: chipidea: host: fix NULL ptr dereference during shutdown usb: renesas_usbhs: add wait after initialization for R-Car Gen3 usb: increase ohci watchdog delay to 275 msec usb: musb: Call pm_runtime from musb_gadget_queue usb: musb: Fix hardirq-safe hardirq-unsafe lock order error usb: ehci-platform: increase EHCI_MAX_RSTS to 4 usb: ohci-at91: Set RemoteWakeupConnected bit explicitly. USB: serial: fix potential NULL-dereference at probe xhci: use default USB_RESUME_TIMEOUT when resuming ports. xhci: workaround for hosts missing CAS bit xhci: add restart quirk for Intel Wildcatpoint PCH USB: serial: cp210x: fix tiocmget error handling wusb: fix error return code in wusb_prf() Revert "Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size" Revert "usb: dwc2: gadget: fix TX FIFO size and address initialization" Revert "usb: dwc2: gadget: change variable name to more meaningful" USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7 wusb: Stop using the stack for sg crypto scratch space usb: dwc3: Fix size used in dma_free_coherent() usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable ...
-
- 29 10月, 2016 29 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fixes from Rafael Wysocki: "These fix recent ACPICA regressions, an older PCI IRQ management regression, and an incorrect return value of a function in the APEI code. Specifics: - Fix three ACPICA issues related to the interpreter locking and introduced by recent changes in that area (Lv Zheng). - Fix a PCI IRQ management regression introduced during the 4.7 cycle and related to the configuration of shared IRQs on systems with an ISA bus (Sinan Kaya). - Fix up a return value of one function in the APEI code (Punit Agrawal)" * tag 'acpi-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region() ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method() ACPICA: Dispatcher: Fix order issue of method termination ACPI / APEI: Fix incorrect return value of ghes_proc() ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs ACPI/PCI: pci_link: penalize SCI correctly ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "These fix two intel_pstate issues related to the way it works when the scaling_governor sysfs attribute is set to "performance" and fix up messages in the system suspend core code. Specifics: - Fix a missing KERN_CONT in a system suspend message by converting the affected code to using pr_info() and pr_cont() instead of the "raw" printk() (Jon Hunter). - Make intel_pstate set the CPU P-state from its .set_policy() callback when the scaling_governor sysfs attribute is set to "performance" so that it interacts with NOHZ_FULL more predictably which was the case before 4.7 (Rafael Wysocki). - Make intel_pstate always request the maximum allowed P-state when the scaling_governor sysfs attribute is set to "performance" to prevent it from effectively ingoring that setting is some situations (Rafael Wysocki)" * tag 'pm-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Always set max P-state in performance mode PM / suspend: Fix missing KERN_CONT for suspend message cpufreq: intel_pstate: Set P-state upfront in performance mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC updates from Vineet Gupta: - support IDU intc for UP builds - support gz, lzma compressed uImage [Daniel Mentz] - adjust /proc/cpuinfo for non-continuous cpu ids [Noam Camus] - syscall for userspace cmpxchg assist for configs lacking hardware atomics - rework of boot log printing mainly for identifying older arc700 cores - retiring some old code, build toggles * tag 'arc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: module: print pretty section names ARC: module: elide loop to save reference to .eh_frame ARC: mm: retire ARC_DBG_TLB_MISS_COUNT... ARC: build: retire old toggles ARC: boot log: refactor cpu name/release printing ARC: boot log: remove awkward space comma from MMU line ARC: boot log: don't assume SWAPE instruction support ARC: boot log: refactor printing abt features not captured in BCRs ARCv2: boot log: print IOC exists as well as enabled status ARCv2: IOC: use @ioc_enable not @ioc_exist where intended ARC: syscall for userspace cmpxchg assist ARC: fix build warning in elf.h ARC: Adjust cpuinfo for non-continuous cpu ids ARC: [build] Support gz, lzma compressed uImage ARCv2: intc: untangle SMP, MCIP and IDU
-
由 Rafael J. Wysocki 提交于
* acpica-fixes: ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region() ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method() ACPICA: Dispatcher: Fix order issue of method termination * acpi-pci-fixes: ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs ACPI/PCI: pci_link: penalize SCI correctly ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages * acpi-apei-fixes: ACPI / APEI: Fix incorrect return value of ghes_proc()
-
由 Lv Zheng 提交于
In the code path of acpi_ev_initialize_region(), there is namespace modification code unlocked. This patch tunes the code to make sure such modification are always locked. Fixes: 74f51b80 (ACPICA: Namespace: Fix dynamic table loading issues) Tested-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
There is a lock unbalanced exit path in acpi_ds_initialize_method(), this patch corrects it. Fixes: 441ad11d (ACPICA: Dispatcher: Fix a mutex issue for method auto serialization) Tested-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Lv Zheng 提交于
The last step of the method termination should be the end of the method serialization. Otherwise, the steps happening after it will face the race issues that cannot be protected by the method serialization mechanism. This patch fixes this issue by moving the per-method-object deletion code prior than the end of the method serialization. Otherwise, the possible race issues may result in AE_ALREADY_EXISTS error in a parallel environment. Fixes: 74f51b80 (ACPICA: Namespace: Fix dynamic table loading issues) Reported-and-tested-by: NImre Deak <imre.deak@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "Fixes marked for stable: - Convert cmp to cmpd in idle enter sequence (Segher Boessenkool) - cxl: Fix leaking pid refs in some error paths (Vaibhav Jain) - Re-fix race condition between going idle and entering guest (Paul Mackerras) - Fix race condition in setting lock bit in idle/wakeup code (Paul Mackerras) - radix: Use tlbiel only if we ever ran on the current cpu (Aneesh Kumar K.V) - relocation, register save fixes for system reset interrupt (Nicholas Piggin) Fixes for code merged this cycle: - Fix CONFIG_ALIVEC typo in restore_tm_state() (Valentin Rothberg) - KVM: PPC: Book3S HV: Fix build error when SMP=n (Michael Ellerman)" * tag 'powerpc-4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: relocation, register save fixes for system reset interrupt powerpc/mm/radix: Use tlbiel only if we ever ran on the current cpu powerpc/process: Fix CONFIG_ALIVEC typo in restore_tm_state() powerpc/64: Fix race condition in setting lock bit in idle/wakeup code powerpc/64: Re-fix race condition between going idle and entering guest cxl: Fix leaking pid refs in some error paths powerpc: Convert cmp to cmpd in idle enter sequence KVM: PPC: Book3S HV: Fix build error when SMP=n
-
由 Rafael J. Wysocki 提交于
* pm-cpufreq-fixes: cpufreq: intel_pstate: Always set max P-state in performance mode cpufreq: intel_pstate: Set P-state upfront in performance mode * pm-sleep-fixes: PM / suspend: Fix missing KERN_CONT for suspend message
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Misc kernel fixes: a virtualization environment related fix, an uncore PMU driver removal handling fix, a PowerPC fix and new events for Knights Landing" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Honour the CPUID for number of fixed counters in hypervisors perf/powerpc: Don't call perf_event_disable() from atomic context perf/core: Protect PMU device removal with a 'pmu_bus_running' check, to fix CONFIG_DEBUG_TEST_DRIVER_REMOVE=y kernel panic perf/x86/intel/cstate: Add C-state residency events for Knights Landing
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: "A build fix, a NULL de-reference found by static analysis, a misuse of the percpu_ref_exit() (tagged for -stable), and notification of failed attempts to clear media errors. These patches have received a build success notification from the 0day- kbuild-robot and appeared in next-20161028" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix percpu_ref_exit ordering nvdimm: make CONFIG_NVDIMM_DAX 'bool' pmem: report error on clear poison failure libnvdimm, namespace: potential NULL deref on allocation error
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Will Deacon: "Three arm64 fixes for -rc3. They're all pretty straightforward: a couple of NUMA issues from the Huawei folks and a thinko in __page_to_voff that seems to be benign, but is certainly better off fixed. Summary: - couple of NUMA fixes - thinko in __page_to_voff" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: fix __page_to_voff definition arm64/numa: fix incorrect log for memory-less node arm64/numa: fix pcpu_cpu_distance() to get correct CPU proximity
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Misc fixes: three build fixes, an unwinder fix and a microcode loader fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/AMD: Fix more fallout from CONFIG_RANDOMIZE_MEMORY=y x86: Fix export for mcount and __fentry__ x86/quirks: Hide maybe-uninitialized warning x86/build: Fix build with older GCC versions x86/unwind: Fix empty stack dereference in guess unwinder
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Ingo Molnar: "Fix four timer locking races: two were noticed by Linus while reviewing the code while chasing for a corruption bug, and two from fixing spurious USB timeouts" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Prevent base clock corruption when forwarding timers: Prevent base clock rewind when forwarding clock timers: Lock base for same bucket optimization timers: Plug locking race vs. timer migration
-
由 Linus Torvalds 提交于
Merge branches 'core-urgent-for-linus', 'irq-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool, irq and scheduler fixes from Ingo Molnar: "One more objtool fixlet for GCC6 code generation patterns, an irq DocBook fix and an unused variable warning fix in the scheduler" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix rare switch jump table pattern detection * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: doc: Add missing parameter for msi_setup * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Remove unused but set variable 'rq'
-
由 Vineet Gupta 提交于
Now that we have referece to section name string table in apply_relocate_add(), use it to - print the name of section being relocated - print symbol with NULL name (since it refers to a section) before | Section to fixup 7000a060 | ========================================================= | rela->r_off | rela->addend | sym->st_value | ADDR | VALUE | ========================================================= | 1c 0 7000e000 7000a07c 7000e000 [] | 40 0 7000a000 7000a0a0 7000a000 [] after | Section to fixup .eh_frame @7000a060 | ========================================================= | r_off r_add st_value ADDRESS VALUE | ========================================================= | 1c 0 7000e000 7000a07c 7000e000 [.init.text] | 40 0 7000a000 7000a0a0 7000a000 [.exit.text] Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
The loop was really needed in .debug_frame regime where wanted make it as SH_ALLOC so that apply_relocate_add() would process it. That's not needed for .eh_frame, so we check this in apply_relocate_add() which gets called for each section. Note that we need to save reference to "section name strings" section in module_frob_arch_sections() since apply_relocate_add() doesn't get that Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
... given that we have perf counters abel to do the same thing non intrusively Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
These are really ancient toggles and tools no longer require them to be passed. This paves way for deprecating them in long run. Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
The motivation is to identify ARC750 vs. ARC770 (we currently print generic "ARC700"). A given ARC700 release could be 750 or 770, with same ARCNUM (or family identifier which is unfortunate). The existing arc_cpu_tbl[] kept a single concatenated string for core name and release which thus doesn't work for 750 vs. 770 identification. So split this into 2 tables, one with core names and other with release. And while we are at it, get rid of the range checking for family numbers. We just document the known to exist cores running Linux and ditch others. With this in place, we add detection of ARC750 which is - cores 0x33 and before - cores 0x34 and later with MMUv2 Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
This came to light when helping a customer with oldish ARC750 core who were getting instruction errors because of lack of SWAPE but boot log was incorrectly printing it as being present Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
On older arc700 cores, some of the features configured were not present in Build config registers. To print about them at boot, we just use the Kconfig option i.e. whether linux is built to use them or not. So yes this seems bogus, but what else can be done. Moreover if linux is booting with these enabled, then the Kconfig info is a good indicator anyways. Over time these "hacks" accumulated in read_arc_build_cfg_regs() as well as arc_cpu_mumbojumbo(). so refactor and move all of those in a single place: read_arc_build_cfg_regs(). This causes some code redcution too: | bloat-o-meter2 arch/arc/kernel/setup.o.0 arch/arc/kernel/setup.o.1 | add/remove: 0/0 grow/shrink: 2/1 up/down: 64/-132 (-68) | function old new delta | setup_processor 610 670 +60 | cpuinfo_arc700 76 80 +4 | arc_cpu_mumbojumbo 752 620 -132 Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "My patch fixes the btrfs list_head abuse that we tracked down during Dave Jones' memory corruption investigation. With both Jens and my patches in place, I'm no longer able to trigger problems. Filipe is fixing a difficult old bug between snapshots, balance and send. Dave is cooking a few more for the next rc, but these are tested and ready" * 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix races on root_log_ctx lists btrfs: fix incremental send failure caused by balance
-
由 Vineet Gupta 提交于
Previously we would not print the case when IOC existed but was not enabled. And while at it, reduce one line off boot printing by consolidating the Peripheral address space and IO-Coherency which in a way applies to them Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "This contains the usual stuff -- the fixups and quirks for HD-audio and USB-audio, in addition to a bad regression fix in ALSA sequencer timer since 4.8, and a trivial fix for asihpi PCI driver" * tag 'sound-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add quirk for Syntek STK1160 ALSA: seq: Fix time account regression ALSA: hda - Fix surround output pins for ASRock B150M mobo ALSA: hda - Fix headset mic detection problem for two Dell laptops ALSA: asihpi: fix kernel memory disclosure ALSA: hda - Adding a new group of pin cfg into ALC295 pin quirk table ALSA: hda - allow 40 bit DMA mask for NVidia devices
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm x86/pat regression fixes from Dave Airlie: "This is a standalone pull request for the fix for a regression introduced in -rc1 by a change to vm_insert_mixed to start using the PAT range tracking to validate page protections. With this fix in place, all the VRAM mappings for GPU drivers ended up at UC instead of WC. There are probably better ways to fix this long term, but nothing I'd considered for -fixes that wouldn't need more settling in time. So I've just created a new arch API that the drivers can reserve all their VRAM aperture ranges as WC" * tag 'drm-x86-pat-regression-fix' of git://people.freedesktop.org/~airlied/linux: drm/drivers: add support for using the arch wc mapping API. x86/io: add interface to reserve io memtype for a resource range. (v1.1)
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device mapper fixes from Mike Snitzer: - a couple DM raid and DM mirror fixes - a couple .request_fn request-based DM NULL pointer fixes - a fix for a DM target reference count leak, on target load error, that prevented associated DM target kernel module(s) from being removed * tag 'dm-4.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm table: fix missing dm_put_target_type() in dm_table_add_target() dm rq: clear kworker_task if kthread_run() returned an error dm: free io_barrier after blk_cleanup_queue call dm raid: fix activation of existing raid4/10 devices dm mirror: use all available legs on multiple failures dm mirror: fix read error on recovery after default leg failure dm raid: fix compat_features validation
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull key fixes from James Morris: - fix a buffer overflow when displaying /proc/keys [CVE-2016-7042]. - fix broken initialisation in the big_key implementation that can result in an oops. - make big_key depend on having a random number generator available in Kconfig. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security/keys: make BIG_KEYS dependent on stdrng. KEYS: Sort out big_key initialisation KEYS: Fix short sprintf buffer in /proc/keys show function
-
- 28 10月, 2016 8 次提交
-
-
由 Rob Herring 提交于
Since commit 761ed4a9 ("tty: serial_core: convert uart_close to use tty_port_close"), the serial console is broken on various systems and typing "reboot" splats the following on the serial console: INIT: Sending p[ 427.863916] BUG: unable to handle kernel NULL pointer dereference at 00000000000001e0 [ 427.885156] IP: [] tty_wakeup+0xc/0x70 [ 427.898337] PGD 0 [ 427.902051] [ 427.907498] Oops: 0000 [#1] PREEMPT SMP [ 427.917635] Modules linked in: nfsv3 nfs_acl nfs fscache lockd sunrpc grace edd af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave fuse loop md_mod dm_mod joydev hid_generic usbhid ipmi_ssif ohci_pci ohci_hcd ehci_pci ehci_hcd e1000e ptp firewire_ohci edac_core pps_core tpm_infineon sp5100_tco firewire_core acpi_cpufreq serio_raw pcspkr fjes usbcore shpchp edac_mce_amd tpm_tis ipmi_si tpm_tis_core i2c_piix4 k10temp sg ipmi_msghandler tpm sr_mod button cdrom kvm_amd kvm irqbypass crc_itu_t ast ttm drm_kms_helper drm fb_sys_fops sysimgblt sysfillrect syscopyarea i2c_algo_bit scsi_dh_rdac scsi_dh_alua scsi_dh_emc scsi_dh_hp_sw ata_generic pata_atiixp [ 428.054179] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc1-1.g73e3f23-default #1 [ 428.072868] Hardware name: System manufacturer System Product Name/KGP(M)E-D16, BIOS 0902 12/03/2010 [ 428.094755] task: ffffffffa2c0d500 task.stack: ffffffffa2c00000 [ 428.109717] RIP: 0010:[] [] tty_wakeup+0xc/0x70 [ 428.128407] RSP: 0018:ffff9a1a5fc03df8 EFLAGS: 00010086 [ 428.142184] RAX: ffff9a1857258000 RBX: ffffffffa3050ea0 RCX: 0000000000000000 [ 428.159649] RDX: 000000000000001b RSI: 0000000000000000 RDI: 0000000000000000 [ 428.177109] RBP: ffff9a1a5fc03e08 R08: 0000000000000000 R09: 0000000000000000 [ 428.194547] R10: 0000000000021c77 R11: 0000000000000000 R12: ffff9a1857258000 [ 428.212002] R13: 0000000000000000 R14: 0000000000000020 R15: 0000000000000020 [ 428.229481] FS: 0000000000000000(0000) GS:ffff9a1a5fc00000(0000) knlGS:0000000000000000 [ 428.248938] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 428.263726] CR2: 00000000000001e0 CR3: 0000000390c06000 CR4: 00000000000006f0 [ 428.281331] Stack: [ 428.288696] ffffffffa3050ea0 ffff9a1857258000 ffff9a1a5fc03e18 ffffffffa24e0ab1 [ 428.307064] ffff9a1a5fc03e40 ffffffffa24e8865 ffffffffa3050ea0 00000000000000c2 [ 428.325456] 0000000000000046 ffff9a1a5fc03e78 ffffffffa24e8a5f ffffffffa3050ea0 [ 428.343905] Call Trace: [ 428.352319] [ 428.356216] [] uart_write_wakeup+0x21/0x30 The problem is for console ports, the serial port is not shutdown and interrupts may fire after the struct tty is gone. Simply calling the tty_port helper tty_port_tty_wakeup instead of tty_wakeup directly will ensure there is a valid struct tty. Fixes: 761ed4a9 ("tty: serial_core: convert uart_close to use tty_port_close") Reported-by: NBorislav Petkov <bp@alien8.de> Reported-by: NMike Galbraith <mgalbraith@suse.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Signed-off-by: NRob Herring <robh@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Geert Uytterhoeven 提交于
The port->console flag is always false, as uart_console() is called before the serial console has been registered. Hence for a serial port used as the console, uart_tty_port_shutdown() will still be called when userspace closes the port, powering it down. This may lead to a system lock up when the serial console driver writes to the serial port's registers. To fix this, move the setting of port->console after the call to uart_configure_port(), which registers the serial console. Fixes: 761ed4a9 ("tty: serial_core: convert uart_close to use tty_port_close") Reported-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NRob Herring <robh@kernel.org> Tested-by: NMugunthan V N <mugunthanvnm@ti.com> Tested-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> [robh: rebased on tty-linus] Signed-off-by: NRob Herring <robh@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Richard Genoud 提交于
After commit 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), the hardware handshake wasn't functional anymore on Atmel platforms (beside SAMA5D2). To understand why, one has to understand the flag ATMEL_US_USMODE_HWHS first: Before commit 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled"), this flag was never set. Thus, the CTS/RTS where only handled by serial_core (and everything worked just fine). This commit introduced the use of the ATMEL_US_USMODE_HWHS flag, enabling it for all boards when the user space enables flow control. When the ATMEL_US_USMODE_HWHS is set, the Atmel USART controller handles a part of the flow control job: - disable the transmitter when the CTS pin gets high. - drive the RTS pin high when the DMA buffer transfer is completed or PDC RX buffer full or RX FIFO is beyond threshold. (depending on the controller version). NB: This feature is *not* mandatory for the flow control to work. (Nevertheless, it's very useful if low latencies are needed.) Now, the specifics of the ATMEL_US_USMODE_HWHS flag: - For platforms with DMAC and no FIFOs (sam9x25, sam9x35, sama5D3, sama5D4, sam9g15, sam9g25, sam9g35)* this feature simply doesn't work. ( source: https://lkml.org/lkml/2016/9/7/598 ) Tested it on sam9g35, the RTS pins always stays up, even when RXEN=1 or a new DMA transfer descriptor is set. => ATMEL_US_USMODE_HWHS must not be used for those platforms - For platforms with a PDC (sam926{0,1,3}, sam9g10, sam9g20, sam9g45, sam9g46)*, there's another kind of problem. Once the flag ATMEL_US_USMODE_HWHS is set, the RTS pin can't be driven anymore via RTSEN/RTSDIS in USART Control Register. The RTS pin can only be driven by enabling/disabling the receiver or setting RCR=RNCR=0 in the PDC (Receive (Next) Counter Register). => Doing this is beyond the scope of this patch and could add other bugs, so the original (and working) behaviour should be set for those platforms (meaning ATMEL_US_USMODE_HWHS flag should be unset). - For platforms with a FIFO (sama5d2)*, the RTS pin is driven according to the RX FIFO thresholds, and can be also driven by RTSEN/RTSDIS in USART Control Register. No problem here. (This was the use case of commit 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled")) NB: If the CTS pin declared as a GPIO in the DTS, (for instance cts-gpios = <&pioA PIN_PB31 GPIO_ACTIVE_LOW>), the transmitter will be disabled. => ATMEL_US_USMODE_HWHS flag can be set for this platform ONLY IF the CTS pin is not a GPIO. So, the only case when ATMEL_US_USMODE_HWHS can be enabled is when (atmel_use_fifo(port) && !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) Tested on all Atmel USART controller flavours: AT91SAM9G35-CM (DMAC flavour), AT91SAM9G20-EK (PDC flavour), SAMA5D2xplained (FIFO flavour). * the list may not be exhaustive Cc: <stable@vger.kernel.org> #4.4+ (beware, missing atmel_port variable) Fixes: 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") Signed-off-by: NRichard Genoud <richard.genoud@gmail.com> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NCyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Imre Palik 提交于
perf doesn't seem to honour the number of fixed counters specified by CPUID leaf 0xa. It always assumes that Intel CPUs have at least 3 fixed counters. So if some of the fixed counters are masked out by the hypervisor, it still tries to check/set them. This patch makes perf behave nicer when the kernel is running under a hypervisor that doesn't expose all the counters. This patch contains some ideas from Matt Wilson. Signed-off-by: NImre Palik <imrep@amazon.de> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: NAndi Kleen <ak@linux.intel.com> Cc: Alexander Kozyrev <alexander.kozyrev@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Artyom Kuanbekov <artyom.kuanbekov@intel.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Wilson <msw@amazon.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1477037939-15605-1-git-send-email-imrep.amz@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
The trinity syscall fuzzer triggered following WARN() on powerpc: WARNING: CPU: 9 PID: 2998 at arch/powerpc/kernel/hw_breakpoint.c:278 ... NIP [c00000000093aedc] .hw_breakpoint_handler+0x28c/0x2b0 LR [c00000000093aed8] .hw_breakpoint_handler+0x288/0x2b0 Call Trace: [c0000002f7933580] [c00000000093aed8] .hw_breakpoint_handler+0x288/0x2b0 (unreliable) [c0000002f7933630] [c0000000000f671c] .notifier_call_chain+0x7c/0xf0 [c0000002f79336d0] [c0000000000f6abc] .__atomic_notifier_call_chain+0xbc/0x1c0 [c0000002f7933780] [c0000000000f6c40] .notify_die+0x70/0xd0 [c0000002f7933820] [c00000000001a74c] .do_break+0x4c/0x100 [c0000002f7933920] [c0000000000089fc] handle_dabr_fault+0x14/0x48 Followed by a lockdep warning: =============================== [ INFO: suspicious RCU usage. ] 4.8.0-rc5+ #7 Tainted: G W ------------------------------- ./include/linux/rcupdate.h:556 Illegal context switch in RCU read-side critical section! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by ls/2998: #0: (rcu_read_lock){......}, at: [<c0000000000f6a00>] .__atomic_notifier_call_chain+0x0/0x1c0 #1: (rcu_read_lock){......}, at: [<c00000000093ac50>] .hw_breakpoint_handler+0x0/0x2b0 stack backtrace: CPU: 9 PID: 2998 Comm: ls Tainted: G W 4.8.0-rc5+ #7 Call Trace: [c0000002f7933150] [c00000000094b1f8] .dump_stack+0xe0/0x14c (unreliable) [c0000002f79331e0] [c00000000013c468] .lockdep_rcu_suspicious+0x138/0x180 [c0000002f7933270] [c0000000001005d8] .___might_sleep+0x278/0x2e0 [c0000002f7933300] [c000000000935584] .mutex_lock_nested+0x64/0x5a0 [c0000002f7933410] [c00000000023084c] .perf_event_ctx_lock_nested+0x16c/0x380 [c0000002f7933500] [c000000000230a80] .perf_event_disable+0x20/0x60 [c0000002f7933580] [c00000000093aeec] .hw_breakpoint_handler+0x29c/0x2b0 [c0000002f7933630] [c0000000000f671c] .notifier_call_chain+0x7c/0xf0 [c0000002f79336d0] [c0000000000f6abc] .__atomic_notifier_call_chain+0xbc/0x1c0 [c0000002f7933780] [c0000000000f6c40] .notify_die+0x70/0xd0 [c0000002f7933820] [c00000000001a74c] .do_break+0x4c/0x100 [c0000002f7933920] [c0000000000089fc] handle_dabr_fault+0x14/0x48 While it looks like the first WARN() is probably valid, the other one is triggered by disabling event via perf_event_disable() from atomic context. The event is disabled here in case we were not able to emulate the instruction that hit the breakpoint. By disabling the event we unschedule the event and make sure it's not scheduled back. But we can't call perf_event_disable() from atomic context, instead we need to use the event's pending_disable irq_work method to disable it. Reported-by: NJan Stancek <jstancek@redhat.com> Signed-off-by: NJiri Olsa <jolsa@kernel.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161026094824.GA21397@kravaSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
perf/core: Protect PMU device removal with a 'pmu_bus_running' check, to fix CONFIG_DEBUG_TEST_DRIVER_REMOVE=y kernel panic CAI Qian reported a crash in the PMU uncore device removal code, enabled by the CONFIG_DEBUG_TEST_DRIVER_REMOVE=y option: https://marc.info/?l=linux-kernel&m=147688837328451 The reason for the crash is that perf_pmu_unregister() tries to remove a PMU device which is not added at this point. We add PMU devices only after pmu_bus is registered, which happens in the perf_event_sysfs_init() call and sets the 'pmu_bus_running' flag. The fix is to get the 'pmu_bus_running' flag state at the point the PMU is taken out of the PMU list and remove the device later only if it's set. Reported-by: NCAI Qian <caiqian@redhat.com> Tested-by: NCAI Qian <caiqian@redhat.com> Signed-off-by: NJiri Olsa <jolsa@kernel.org> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161020111011.GA13361@kravaSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Borislav Petkov 提交于
We needed the physical address of the container in order to compute the offset within the relocated ramdisk. And we did this by doing __pa() on the virtual address. However, __pa() does checks whether the physical address is within PAGE_OFFSET and __START_KERNEL_map - see __phys_addr() - which fail if we have CONFIG_RANDOMIZE_MEMORY enabled: we feed a virtual address which *doesn't* have the randomization offset into a function which uses PAGE_OFFSET which *does* have that offset. This makes this check fire: VIRTUAL_BUG_ON((x > y) || !phys_addr_valid(x)); ^^^^^^ due to the randomization offset. The fix is as simple as using __pa_nodebug() because we do that randomization offset accounting later in that function ourselves. Reported-by: NBob Peterson <rpeterso@redhat.com> Tested-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm <linux-mm@kvack.org> Cc: stable@vger.kernel.org # 4.9 Link: http://lkml.kernel.org/r/20161027123623.j2jri5bandimboff@pd.tnicSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "20 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: drivers/misc/sgi-gru/grumain.c: remove bogus 0x prefix from printk cris/arch-v32: cryptocop: print a hex number after a 0x prefix ipack: print a hex number after a 0x prefix block: DAC960: print a hex number after a 0x prefix fs: exofs: print a hex number after a 0x prefix lib/genalloc.c: start search from start of chunk mm: memcontrol: do not recurse in direct reclaim CREDITS: update credit information for Martin Kepplinger proc: fix NULL dereference when reading /proc/<pid>/auxv mm: kmemleak: ensure that the task stack is not freed during scanning lib/stackdepot.c: bump stackdepot capacity from 16MB to 128MB latent_entropy: raise CONFIG_FRAME_WARN by default kconfig.h: remove config_enabled() macro ipc: account for kmem usage on mqueue and msg mm/slab: improve performance of gathering slabinfo stats mm: page_alloc: use KERN_CONT where appropriate mm/list_lru.c: avoid error-path NULL pointer deref h8300: fix syscall restarting kcov: properly check if we are in an interrupt mm/slab: fix kmemcg cache creation delayed issue
-