[try_]writeback_inodes_sb[_nr]() and sync_inodes_sb() currently only
handle dirty inodes on the root wb (bdi_writeback) of the target bdi.
This patch implements bdi_split_work_to_wbs() and use it to make these
functions handle multiple wb's.

bdi_split_work_to_wbs() takes a base wb_writeback_work and create
clones of it and issue them to the wb's of the target bdi.  The base
work's nr_pages is distributed using wb_split_bdi_pages() -
ie. according to each wb's write bandwidth's proportion in the bdi.

Cloning a bdi involves memory allocation which may fail.  In such
cases, bdi_split_work_to_wbs() issues the base work directly and waits
for its completion before proceeding to the next wb to guarantee
forward progress and correctness under memory pressure.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

try_writeback_inodes_sb_nr() wraps writeback_inodes_sb_nr() so that it
handles s_umount locking and skips if writeback is already in
progress.  The in progress test is performed on the root wb
(bdi_writeback) which isn't sufficient for cgroup writeback support.
The test must be done per-wb.

To prepare for the change, this patch factors out
__writeback_inodes_sb_nr() from writeback_inodes_sb_nr() and adds
@skip_if_busy and moves the in progress test right before queueing the
wb_writeback_work.  try_writeback_inodes_sb_nr() now just grabs
s_umount and invokes __writeback_inodes_sb_nr() with asserted
@skip_if_busy.  This way, later addition of multiple wb handling can
skip only the wb's which already have writeback in progress.

This swaps the order between in progress test and s_umount test which
can flip the return value when writeback is in progress and s_umount
is being held by someone else but this shouldn't cause any meaningful
difference.  It's a fringe condition and the return value is an
unsynchronized hint anyway.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

For cgroup writeback, multiple wb_writeback_work items may need to be
issuedto accomplish a single task.  The previous patch updated the
waiting mechanism such that wb_wait_for_completion() can wait for
multiple work items.

Issuing mulitple work items involves memory allocation which may fail.
As most writeback operations can't fail or blocked on memory
allocation, in such cases, we'll fall back to sequential issuing of an
on-stack work item, which would need to be waited upon sequentially.

This patch implements wb_wait_for_single_work() which waits for a
single work item independently from wb_completion waiting so that such
fallback mechanism can be used without getting tangled with the usual
issuing / completion operation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

If the completion of a wb_writeback_work can be waited upon by setting
its ->done to a struct completion and waiting on it; however, for
cgroup writeback support, it's necessary to issue multiple work items
to multiple bdi_writebacks and wait for the completion of all.

This patch implements wb_completion which can wait for multiple work
items and replaces the struct completion with it.  It can be defined
using DEFINE_WB_COMPLETION_ONSTACK(), used for multiple work items and
waited for by wb_wait_for_completion().

Nobody currently issues multiple work items and this patch doesn't
introduce any behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a wb_writeback_work is freed automatically on completion if
it doesn't have ->done set.  Add wb_writeback_work->auto_free to make
the switch explicit.  This will help cgroup writeback support where
waiting for completion and whether to free automatically don't
necessarily move together.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

wakeup_dirtytime_writeback() currently only starts writeback on the
root wb (bdi_writeback).  For cgroup writeback support, update the
function to check all wbs.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NJens Axboe <axboe@fb.com>

wakeup_flusher_threads() currently only starts writeback on the root
wb (bdi_writeback).  For cgroup writeback support, update the function
to wake up all wbs and distribute the number of pages to write
according to the proportion of each wb's write bandwidth, which is
implemented in wb_split_bdi_pages().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

bdi_start_background_writeback() currently takes @bdi and kicks the
root wb (bdi_writeback).  In preparation for cgroup writeback support,
make it take wb instead.

This patch doesn't make any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

writeback_in_progress() currently takes @bdi and returns whether
writeback is in progress on its root wb (bdi_writeback).  In
preparation for cgroup writeback support, make it take wb instead.
While at it, make it an inline function.

This patch doesn't make any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

For cgroup writeback support, all bdi-wide operations should be
distributed to all its wb's (bdi_writeback's).

This patch updates laptop_mode_timer_fn() so that it invokes
wb_start_writeback() on all wb's rather than just the root one.  As
the intent is writing out all dirty data, there's no reason to split
the number of pages to write.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

bdi_start_writeback() is a thin wrapper on top of
__wb_start_writeback() which is used only by laptop_mode_timer_fn().
This patches removes bdi_start_writeback(), renames
__wb_start_writeback() to wb_start_writeback() and makes
laptop_mode_timer_fn() use it instead.

This doesn't cause any functional difference and will ease making
laptop_mode_timer_fn() cgroup writeback aware.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

This will be used to implement bdi-wide operations which should be
distributed across all its cgroup bdi_writebacks.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

bdi->min/max_ratio are user-configurable per-bdi knobs which regulate
dirty limit of each bdi.  For cgroup writeback, they need to be
further distributed across wb's (bdi_writeback's) belonging to the
configured bdi.

This patch introduces wb_min_max_ratio() which distributes
bdi->min/max_ratio according to a wb's proportion in the total active
bandwidth of its bdi.

v2: Update wb_min_max_ratio() to fix a bug where both min and max were
    assigned the min value and avoid calculations when possible.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

There are several places in fs/fs-writeback.c which queues
wb_writeback_work without checking whether the target wb
(bdi_writeback) has dirty inodes or not.  The only thing
wb_writeback_work does is writing back the dirty inodes for the target
wb and queueing a work item for a clean wb is essentially noop.  There
are some side effects such as bandwidth stats being updated and
triggering tracepoints but these don't affect the operation in any
meaningful way.

This patch makes all writeback_inodes_sb_nr() and sync_inodes_sb()
skip wb_queue_work() if the target bdi is clean.  Also, it moves
dirtiness check from wakeup_flusher_threads() to
__wb_start_writeback() so that all its callers benefit from the check.

While the overhead incurred by scheduling a noop work isn't currently
significant, the overhead may be higher with cgroup writeback support
as we may end up issuing noop work items to a lot of clean wb's.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

bdi_has_dirty_io() used to only reflect whether the root wb
(bdi_writeback) has dirty inodes.  For cgroup writeback support, it
needs to take all active wb's into account.  If any wb on the bdi has
dirty inodes, bdi_has_dirty_io() should return true.

To achieve that, as inode_wb_list_{move|del}_locked() now keep track
of the dirty state transition of each wb, the number of dirty wbs can
be counted in the bdi; however, bdi is already aggregating
wb->avg_write_bandwidth which can easily be guaranteed to be > 0 when
there are any dirty inodes by ensuring wb->avg_write_bandwidth can't
dip below 1.  bdi_has_dirty_io() can simply test whether
bdi->tot_write_bandwidth is zero or not.

While this bumps the value of wb->avg_write_bandwidth to one when it
used to be zero, this shouldn't cause any meaningful behavior
difference.

bdi_has_dirty_io() is made an inline function which tests whether
->tot_write_bandwidth is non-zero.  Also, WARN_ON_ONCE()'s on its
value are added to inode_wb_list_{move|del}_locked().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

cgroup writeback support needs to keep track of the sum of
avg_write_bandwidth of all wb's (bdi_writeback's) with dirty inodes to
distribute write workload.  This patch adds bdi->tot_write_bandwidth
and updates inode_wb_list_move_locked(), inode_wb_list_del_locked()
and wb_update_write_bandwidth() to adjust it as wb's gain and lose
dirty inodes and its avg_write_bandwidth gets updated.

As the update events are not synchronized with each other,
bdi->tot_write_bandwidth is an atomic_long_t.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, wb_has_dirty_io() determines whether a wb (bdi_writeback)
has any dirty inode by testing all three IO lists on each invocation
without actively keeping track.  For cgroup writeback support, a
single bdi will host multiple wb's each of which will host dirty
inodes separately and we'll need to make bdi_has_dirty_io(), which
currently only represents the root wb, aggregate has_dirty_io from all
member wb's, which requires tracking transitions in has_dirty_io state
on each wb.

This patch introduces inode_wb_list_{move|del}_locked() to consolidate
IO list operations leaving queue_io() the only other function which
directly manipulates IO lists (via move_expired_inodes()).  All three
functions are updated to call wb_io_lists_[de]populated() which keep
track of whether the wb has dirty inodes or not and record it using
the new WB_has_dirty_io flag.  inode_wb_list_moved_locked()'s return
value indicates whether the wb had no dirty inodes before.

mark_inode_dirty() is restructured so that the return value of
inode_wb_list_move_locked() can be used for deciding whether to wake
up the wb.

While at it, change {bdi|wb}_has_dirty_io()'s return values to bool.
These functions were returning 0 and 1 before.  Also, add a comment
explaining the synchronization of wb_state flags.

v2: Updated to accommodate b_dirty_time.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

In several places, bdi_congested() and its wrappers are used to
determine whether more IOs should be issued.  With cgroup writeback
support, this question can't be answered solely based on the bdi
(backing_dev_info).  It's dependent on whether the filesystem and bdi
support cgroup writeback and the blkcg the inode is associated with.

This patch implements inode_congested() and its wrappers which take
@inode and determines the congestion state considering cgroup
writeback.  The new functions replace bdi_*congested() calls in places
where the query is about specific inode and task.

There are several filesystem users which also fit this criteria but
they should be updated when each filesystem implements cgroup
writeback support.

v2: Now that a given inode is associated with only one wb, congestion
    state can be determined independent from the asking task.  Drop
    @task.  Spotted by Vivek.  Also, converted to take @inode instead
    of @mapping and renamed to inode_congested().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Now that bdi layer can handle per-blkcg bdi_writeback_congested state,
blk_{set|clear}_congested() can propagate non-root blkcg congestion
state to them.

This can be easily achieved by disabling the root_rl tests in
blk_{set|clear}_congested().  Note that we still need those tests when
!CONFIG_CGROUP_WRITEBACK as otherwise we'll end up flipping root blkcg
wb's congestion state for events happening on other blkcgs.

v2: Updated for bdi_writeback_congested.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

blk_{set|clear}_queue_congested() take @q and set or clear,
respectively, the congestion state of its bdi's root wb.  Because bdi
used to be able to handle congestion state only on the root wb, the
callers of those functions tested whether the congestion is on the
root blkcg and skipped if not.

This is cumbersome and makes implementation of per cgroup
bdi_writeback congestion state propagation difficult.  This patch
renames blk_{set|clear}_queue_congested() to
blk_{set|clear}_congested(), and makes them take request_list instead
of request_queue and test whether the specified request_list is the
root one before updating bdi_writeback congestion state.  This makes
the tests in the callers unnecessary and simplifies them.

As there are no external users of these functions, the definitions are
moved from include/linux/blkdev.h to block/blk-core.c.

This patch doesn't introduce any noticeable behavior difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, all congestion functions take bdi (backing_dev_info) and
always operate on the root wb (bdi->wb) and the congestion state from
the block layer is propagated only for the root blkcg.  This patch
introduces {set|clear}_wb_congested() and wb_congested() which take a
bdi_writeback_congested and bdi_writeback respectively.  The bdi
counteparts are now wrappers invoking the wb based functions on
@bdi->wb.

While converting clear_bdi_congested() to clear_wb_congested(), the
local variable declaration order between @wqh and @bit is swapped for
cosmetic reason.

This patch just adds the new wb based functions.  The following
patches will apply them.

v2: Updated for bdi_writeback_congested.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, balance_dirty_pages() always work on bdi->wb.  This patch
updates it to work on the wb (bdi_writeback) matching memcg and blkcg
of the current task as that's what the inode is being dirtied against.

balance_dirty_pages_ratelimited() now pins the current wb and passes
it to balance_dirty_pages().

As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to
visible behavior differences.

v2: Updated for per-inode wb association.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Until now, all WB_* stats were accounted against the root wb
(bdi_writeback), now that multiple wb (bdi_writeback) support is in
place, let's attributes the stats to the respective per-cgroup wb's.

As no filesystem has FS_CGROUP_WRITEBACK yet, this doesn't lead to
visible behavior differences.

v2: Updated for per-inode wb association.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

A blkg (blkcg_gq) can be congested and decongested independently from
other blkgs on the same request_queue.  Accordingly, for cgroup
writeback support, the congestion status at bdi (backing_dev_info)
should be split and updated separately from matching blkg's.

This patch prepares by adding blkg->wb_congested and associating a
blkg with its matching per-blkcg bdi_writeback_congested on creation.

v2: Updated to associate bdi_writeback_congested instead of
    bdi_writeback.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

For the planned cgroup writeback support, on each bdi
(backing_dev_info), each memcg will be served by a separate wb
(bdi_writeback).  This patch updates bdi so that a bdi can host
multiple wbs (bdi_writebacks).

On the default hierarchy, blkcg implicitly enables memcg.  This allows
using memcg's page ownership for attributing writeback IOs, and every
memcg - blkcg combination can be served by its own wb by assigning a
dedicated wb to each memcg.  This means that there may be multiple
wb's of a bdi mapped to the same blkcg.  As congested state is per
blkcg - bdi combination, those wb's should share the same congested
state.  This is achieved by tracking congested state via
bdi_writeback_congested structs which are keyed by blkcg.

bdi->wb remains unchanged and will keep serving the root cgroup.
cgwb's (cgroup wb's) for non-root cgroups are created on-demand or
looked up while dirtying an inode according to the memcg of the page
being dirtied or current task.  Each cgwb is indexed on bdi->cgwb_tree
by its memcg id.  Once an inode is associated with its wb, it can be
retrieved using inode_to_wb().

Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all
pages will keep being associated with bdi->wb.

v3: inode_attach_wb() in account_page_dirtied() moved inside
    mapping_cap_account_dirty() block where it's known to be !NULL.
    Also, an unnecessary NULL check before kfree() removed.  Both
    detected by the kbuild bot.

v2: Updated so that wb association is per inode and wb is per memcg
    rather than blkcg.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

cgroup writeback requires support from both bdi and filesystem sides.
Add BDI_CAP_CGROUP_WRITEBACK and FS_CGROUP_WRITEBACK to indicate
support and enable BDI_CAP_CGROUP_WRITEBACK on block based bdi's by
default.  Also, define CONFIG_CGROUP_WRITEBACK which is enabled if
both MEMCG and BLK_CGROUP are enabled.

inode_cgwb_enabled() which determines whether a given inode's both bdi
and fs support cgroup writeback is added.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a wb's (bdi_writeback) congestion state is carried in its
->state field; however, cgroup writeback support will require multiple
wb's sharing the same congestion state.  This patch separates out
congestion state into its own struct - struct bdi_writeback_congested.
A new field wb field, wb_congested, points to its associated congested
struct.  The default wb, bdi->wb, always points to bdi->wb_congested.

While this patch adds a layer of indirection, it doesn't introduce any
behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

wb_init() currently always uses GFP_KERNEL but the planned cgroup
writeback support needs using other allocation masks.  Add @gfp to
wb_init().

This patch doesn't introduce any behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

Now that bdi definitions are moved to backing-dev-defs.h,
backing-dev.h can include blkdev.h and inline inode_to_bdi() without
worrying about introducing circular include dependency.  The function
gets called from hot paths and fairly trivial.

This patch makes inode_to_bdi() and sb_is_blkdev_sb() that the
function calls inline.  blockdev_superblock and noop_backing_dev_info
are EXPORT_GPL'd to allow the inline functions to be used from
modules.

While at it, make sb_is_blkdev_sb() return bool instead of int.

v2: Fixed typo in description as suggested by Jan.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.

This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it.  c files
which need access to more backing-dev details now include
backing-dev.h directly.  This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.

v2: fs/fat build failure fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

Move wb_shutdown(), bdi_register(), bdi_register_dev(),
bdi_prune_sb(), bdi_remove_from_list() and bdi_unregister() so that
init / exit functions are grouped together.  This will make updating
init / exit paths for cgroup writeback support easier.

This is pure source file reorganization.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bdi->wb_lock and ->worklist into wb.

* The lock protects bdi->worklist and bdi->wb.dwork scheduling.  While
  moving, rename it to wb->work_lock as wb->wb_lock is confusing.
  Also, move wb->dwork downwards so that it's colocated with the new
  ->work_lock and ->work_list fields.

* bdi_writeback_workfn()		-> wb_workfn()
  bdi_wakeup_thread_delayed(bdi)	-> wb_wakeup_delayed(wb)
  bdi_wakeup_thread(bdi)		-> wb_wakeup(wb)
  bdi_queue_work(bdi, ...)		-> wb_queue_work(wb, ...)
  __bdi_start_writeback(bdi, ...)	-> __wb_start_writeback(wb, ...)
  get_next_work_item(bdi)		-> get_next_work_item(wb)

* bdi_wb_shutdown() is renamed to wb_shutdown() and now takes @wb.
  The function contained parts which belong to the containing bdi
  rather than the wb itself - testing cap_writeback_dirty and
  bdi_remove_from_list() invocation.  Those are moved to
  bdi_unregister().

* bdi_wb_{init|exit}() are renamed to wb_{init|exit}().
  Initializations of the moved bdi->wb_lock and ->work_list are
  relocated from bdi_init() to wb_init().

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->state are mechanically replaced with bdi->wb.state
  introducing no behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Writeback operations will now be per wb (bdi_writeback) instead of
bdi.  Replace the relevant bdi references in symbol names and comments
with wb.  This patch is purely cosmetic and doesn't make any
functional changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bandwidth related fields from backing_dev_info into
bdi_writeback.

* The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp,
  write_bandwidth, avg_write_bandwidth, dirty_ratelimit,
  balanced_dirty_ratelimit, completions and dirty_exceeded.

* writeback_chunk_size() and over_bground_thresh() now take @wb
  instead of @bdi.

* bdi_writeout_fraction(bdi, ...)	-> wb_writeout_fraction(wb, ...)
  bdi_dirty_limit(bdi, ...)		-> wb_dirty_limit(wb, ...)
  bdi_position_ration(bdi, ...)		-> wb_position_ratio(wb, ...)
  bdi_update_writebandwidth(bdi, ...)	-> wb_update_write_bandwidth(wb, ...)
  [__]bdi_update_bandwidth(bdi, ...)	-> [__]wb_update_bandwidth(wb, ...)
  bdi_{max|min}_pause(bdi, ...)		-> wb_{max|min}_pause(wb, ...)
  bdi_dirty_limits(bdi, ...)		-> wb_dirty_limits(wb, ...)

* Init/exits of the relocated fields are moved to bdi_wb_init/exit()
  respectively.  Note that explicit zeroing is dropped in the process
  as wb's are cleared in entirety anyway.

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
  introducing no behavior changes.

v2: Typo in description fixed as suggested by Jan.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bdi->bdi_stat[] into wb.

* enum bdi_stat_item is renamed to wb_stat_item and the prefix of all
  enums is changed from BDI_ to WB_.

* BDI_STAT_BATCH() -> WB_STAT_BATCH()

* [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...)

* bdi_stat[_error]() -> wb_stat[_error]()

* bdi_writeout_inc() -> wb_writeout_inc()

* stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and
  frees stat.

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
  introducing no behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bdi->state into wb.

* enum bdi_state is renamed to wb_state and the prefix of all enums is
  changed from BDI_ to WB_.

* Explicit zeroing of bdi->state is removed without adding zeoring of
  wb->state as the whole data structure is zeroed on init anyway.

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->state are mechanically replaced with bdi->wb.state
  introducing no behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: drbd-dev@lists.linbit.com
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Implement mem_cgroup_css_from_page() which returns the
cgroup_subsys_state of the memcg associated with a given page on the
default hierarchy.  This will be used by cgroup writeback support.

This function assumes that page->mem_cgroup association doesn't change
until the page is released, which is true on the default hierarchy as
long as replace_page_cache_page() is not used.  As the only user of
replace_page_cache_page() is FUSE which won't support cgroup writeback
for the time being, this works for now, and replace_page_cache_page()
will soon be updated so that the invariant actually holds.

Note that the RCU protected page->mem_cgroup access is consistent with
other usages across memcg but ultimately incorrect.  These unlocked
accesses are missing required barriers.  page->mem_cgroup should be
made an RCU pointer and updated and accessed using RCU operations.

v4: Instead of triggering WARN, return the root css on the traditional
    hierarchies.  This makes the function a lot easier to deal with
    especially as there's no light way to synchronize against
    hierarchy rebinding.

v3: s/mem_cgroup_migrate()/mem_cgroup_css_from_page()/

v2: Trigger WARN if the function is used on the traditional
    hierarchies and add comment about the assumed invariant.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a bio can only be associated with the io_context and blkcg
of %current using bio_associate_current().  This is too restrictive
for cgroup writeback support.  Implement bio_associate_blkcg() which
associates a bio with the specified blkcg.

bio_associate_blkcg() leaves the io_context unassociated.
bio_associate_current() is updated so that it considers a bio as
already associated if it has a blkcg_css, instead of an io_context,
associated with it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Implement a wrapper around task_get_css() to acquire the blkcg css for
a given task.  The wrapper is necessary for cgroup writeback support
as there will be places outside blkcg proper trying to acquire
blkcg_css and blkio_cgrp_id will be undefined when !CONFIG_BLK_CGROUP.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

bio_associate_current() currently open codes task_css() and
css_tryget_online() to find and pin $current's blkcg css.  Abstract it
into task_get_css() which is implemented from cgroup side.  As a task
is always associated with an online css for every subsystem except
while the css_set update is propagating, task_get_css() retries till
css_tryget_online() succeeds.

This is a cleanup and shouldn't lead to noticeable behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>