This patch makes modpost able to process object files with more than
64k sections. Needed for huge kernel builds (allyesconfig, for example)
with -ffunction-sections. 64k sections handling is covered, for example,
by this document:

"IA-64 gABI Proposal 74: Section Indexes"
http://www.codesourcery.com/public/cxx-abi/abi/prop-74-sindex.htmlSigned-off-by: NDenys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: NAnders Kaseorg <andersk@mit.edu>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

It is now possible to assign options to AS and CC
on the command line - which is only used for built-in code.

{A,C}FLAGS_KERNEL was used both in the top-level Makefile
in the arch makefiles, thus users had no way to specify
additional options to AS, CC without overriding
the original value.

Introduce a new set of variables KBUILD_{A,C}FLAGS_KERNEL
that is used by arch specific files and free up
{A,C}FLAGS_KERNEL so they can be assigned on
the command line.

All arch Makefiles that used the old variables has been updated.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

It is now possible to assign options to AS, CC and LD
on the command line - which is only used when building modules.

{A,C,LD}FLAGS_MODULE was all used both in the top-level Makefile
in the arch makefiles, thus users had no way to specify
additional options to AS, CC, LD when building modules
without overriding the original value.

Introduce a new set of variables KBUILD_{A,C,LD}FLAGS_MODULE
that is used by arch specific files and free up
{A,C,LD}FLAGS_MODULE so they can be assigned on
the command line.

All arch Makefiles that used the old variables has been updated.

Note: Previously we had a MODFLAGS variable for both
AS and CC. But in favour of consistency this was dropped.
So in some cases arch Makefile has one assignmnet replaced by
two assignmnets.

Note2: MODFLAGS was not documented and is dropped
without any notice. I do not expect much/any breakage
from this.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [avr32]
Signed-off-by: NMichal Marek <mmarek@suse.cz>

nconfig segfaults when help text contains the character '%'. For a quick
example, navigate to the kernel compression options and get the help for
bzip2. Doing so triggers a call to mvwprintw() with a string containing
'%' and no extra arguments to fill in the specifier's value. Fix this
case by printing the literal string retrieved from the kconfig.

 #0  0x00002b52b6b11d83 in vfprintf () from /lib/libc.so.6
 #1  0x00002b52b6bad010 in __vsnprintf_chk () from /lib/libc.so.6
 #2  0x00002b52b623991b in _nc_printf_string () from
 /lib/libncursesw.so.5
 #3  0x00002b52b6234cff in vwprintw () from /lib/libncursesw.so.5
 #4  0x00002b52b6234db9 in mvwprintw () from /lib/libncursesw.so.5
 #5  0x00000000004151d8 in fill_window (win=0x21b64c0,
     text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression ratio and
     speed is intermediate.\nDecompression speed is slowest among the
     three.  The kernel\nsize is about 10% smaller with bzip2, in
     comparison to gzip.\nBzip2 us"...)
     at scripts/kconfig/nconf.gui.c:229
 #6  0x0000000000416335 in show_scroll_win (main_window=0x21a5630,
         title=0x157fa30 "Bzip2",
 	    text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression
 	    ratio and speed is intermediate.\nDecompression speed is
 	    slowest among the three.  The kernel\nsize is about 10%
 	    smaller with bzip2, in comparison to gzip.\nBzip2 us"...)
     at scripts/kconfig/nconf.gui.c:535
 #7  0x00000000004055b2 in show_help (menu=0x157f9d0)
         at scripts/kconfig/nconf.c:1257
 #8  0x0000000000405897 in conf_choice (menu=0x157f130)
 	    at scripts/kconfig/nconf.c:1321
 #9  0x0000000000405326 in conf (menu=0x157d130) at
 	    scripts/kconfig/nconf.c:1208
 #10 0x00000000004052e8 in conf (menu=0xb434a0) at
 	    scripts/kconfig/nconf.c:1203
 #11 0x0000000000406092 in main (ac=2, av=0x7fff96a93c38)

Cc: Michal Marek <mmarek@suse.cz>
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: NStephen Boyd <bebarino@gmail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

make rpm was broken by commit 09155120:
make clean
set -e; cd ..; ln -sf /usr/src/iwlwifi-2.6 kernel-2.6.35rc4wl
/bin/sh /usr/src/iwlwifi-2.6/scripts/setlocalversion --scm-only >
/usr/src/iwlwifi-2.6/.scmversion
cat: .scmversion: input file is output file
make[1]: *** [rpm] Error 1
Reported-and-tested-by: N"Zheng, Jiajia" <jiajia.zheng@intel.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

The 'source' builtin is a bash alias to the '.' (dot) builtin. While the
former is supported only by bash, the latter is specified in POSIX and
works fine with all POSIX-compliant shells I am aware of.

The '$_' special parameter is specific to bash. It is partially
supported in dash too but it always evaluates to the current script path
(which causes the script to enter a loop recursively re-executing
itself). This is why I have replaced the two occurences of '$_' with the
explicit parameter.

The 'local' builtin is another example of bash-specific code. Although
it is supported by all POSIX-compliant shells I am aware of, it is not
part of POSIX specification and thus the code should not rely on it
assigning a specific value to the local variable. Moreover, the 'posh'
shell has a limited version of 'local' builtin not supporting direct
variable assignments. Thus, I have broken one of the 'local'
declarations down into a (non-POSIX) 'local' declaration and a plain
(POSIX-compliant) variable assignment.
Signed-off-by: NMichał Górny <gentoo@mgorny.alt.pl>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Gcc 4.5 is now generating out of line register save and restore
in the function prefix and postfix when we use -Os.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Now that we run scripts/setlocalversion during every build, it makes
sense to move all the localversion logic there. This cleans up the
toplevel Makefile and also makes sure that the script is called only
once in 'make prepare' (previously, it would be called every time due to
a variable expansion in an ifneq statement). No user-visible change is
intended, unless one runs the setlocalversion script directly.
Reported-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Alan <alan@clueserver.org> writes:

> program: /home/alan/GitTrees/linux-2.6-mid-ref/scripts/mod/modpost -o
> Module.symvers -S vmlinux.o
>
> Program received signal SIGSEGV, Segmentation fault.

It just hit me.
It's the offset calculation in reloc_location() which overflows:
        return (void *)elf->hdr + sechdrs[section].sh_offset +
               (r->r_offset - sechdrs[section].sh_addr);

E.g. for the first rodata r entry:
r->r_offset < sechdrs[section].sh_addr
and the expression in the parenthesis produces 0xFFFFFFE0 or something
equally wise.
Reported-by: NAlan <alan@clueserver.org>
Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>
Tested-by: NAlan <alan@clueserver.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

commit 37a8d9f6 tried to combine some
duplicate code and accidentally broke how KBUILD_SYMTYPES worked

This fixes the code to match the original intention by the author who
originally added the code I believe.

The fixes include:
- removing extra whitespaces in the if-statements
- moving the if-statement from around the -r to the -T
- adding a second arg to cmd_gensymtypes to simplify the options passed
  to genksyms.

Tested by instrumenting genksyms and seeing what options were passed in
during a make, KBUILD_SYMTYPES make, and when a foo.symref was created.

Everything compiled and looked ok.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Making gconfig fails on fedora 13 as the linker cannot resolve dlsym.

Adding libdl to the link command fixes this.

make shows this error :-
    /usr/bin/ld: scripts/kconfig/kconfig_load.o: undefined reference to symbol 'dlsym@@GLIBC_2.2.5'
    /usr/bin/ld: note: 'dlsym@@GLIBC_2.2.5' is defined in DSO /lib64/libdl.so.2 so try adding it to the linker command line
    /lib64/libdl.so.2: could not read symbols: Invalid operation

tested on x86_64 fedora 13.
Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Finding the list of Makefiles in streamline-config should not report errors.

Also move the "chomp" to the @makefiles array instead of doing it in the
for loop. This is more efficient, and does not make it any less readable
by C programmers.
Signed-off-by: NToralf Foerster <toralf.foerster@gmx.de>
LKML-Reference: <201005262022.02928.toralf.foerster@gmx.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Signed-off-by: NToralf Foerster <toralf.foerster@gmx.de>
LKML-Reference: <201005281025.52753.toralf.foerster@gmx.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Proper perl requires that local variables should be declared with 'my',
otherwise this may produce errors.
Signed-off-by: NToralf Foerster <toralf.foerster@gmx.de>
LKML-Reference: <201005281025.00358.toralf.foerster@gmx.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add the necessary parts to be enable the use of LZO-compressed initramfs
build into the kernel.
Signed-off-by: NAlbin Tonnerre <albin.tonnerre@free-electrons.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NJean Delvare <khali@linux-fr.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I've seen various new Kconfigs with rather unhelpful one liner
descriptions.  Add a Kconfig warning for a minimum length of the Kconfig
help section.

Right now I arbitarily chose 4. The exact value can be debated.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This changes the default of the option --git-all-signature-types to be
disabled by default.

The effect being, that only certain (currently Signed-Off-By:, Acked-by:
and Reviewed-By:) tags are used to get adresses of potential maintainers.

Motivated is this change by the desire to not 'spam' people unnecessary: A
Tested-By or a Reported-By is not ment as a hint that those people want
to/are able to review patches to the code in question.

In a quest to find resilient statistics for this i came up with this:

I produced a list of all the tag-signers not already covered with a
signed-off/acked/reviewed tag somewhere in the last year of git history.

Those were 650 addresses of "assumed non-developers".

And to check if those "assumed non-developers" are professional
testers/reporters worth cc'ing, i then counted their total appearences
in the git log:

469 were mentioned only once.
123 were mentioned twice.
38 three times
8 four times
5 six times
5 five times
1 eight times
1 fourteen times

I believe this supports my thesis, that the ''non-maintainer-tags'' are
not actively useful for patch-review.  (except probably the guy mentioned
fourteen times...)

But of course one could also find arguments to poke holes in this
statistics, for example does this statistic not include code-locality: A
tested-by on a patch that touches some specific piece of code can be more
worth than a signed-off in another part of the tree.

But...  let's play it safe and let's err on the "safe" side meaning to not
spam those people when in doubt.  We already have the signed-off's and
Maintainers file.  So this should be ok.  And if need be, the maintainers
can always forward the patch.

[i probably could make a diploma thesis out of this changelog :)]
Signed-off-by: NFlorian Mickler <florian@mickler.org>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Joe Perches <joe@perches.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow the use of a .get_maintainer.conf file to control the default
options applied when scripts/get_maintainer.pl is run.

.get_maintainer.conf can contain any valid command-line argument.

File contents are prepended to any additional command line arguments.

Multiple lines may be used, blank lines ignored, # is a comment.

Updated scripts/get_maintainer.pl version to 0.24
Signed-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NFlorian Mickler <florian@mickler.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When using --git to determine who to send a patch to, get_maintainers will
currently include all signatures.  This can include signers that simply
report an issue or test a patch.  Signers that use this tag are not
necessarily good candidates to review new patches.

This patch allows get_maintainers to optionally restrict output to only
signatures that use Signed-off-by:, Acked-by:, or Reviewed-by:.

Signed-off-by: is included because those are people who are responsible
for the code.

Acked-by: is questionable, but as signers that use this tag tend to be
active linux gatekeepers, false positives are tolerable.

Reviewed-by: is included because signers responsible for the code thought
that the review feedback for a changeset by that signer was valuable.

This patch has been modified from Florian's original submission to change
the supported signature types to the canonical forms and use slightly
different spacing.  A couple of spacing issues were also corrected in the
original source.  The command line argument was also renamed.
Original-patch-by: NFlorian Mickler <florian@mickler.org>
Signed-off-by: NFlorian Mickler <florian@mickler.org>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The conversion of device->sem to device->mutex resulted in lockdep
warnings. Create a novalidate class for now until the driver folks
come up with separate classes. That way we have at least the basic
mutex debugging coverage.

Add a checkpatch error so the usage is reserved for device->mutex.

[ tglx: checkpatch and compile fix for LOCKDEP=n ]
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

On Monday 23 November 2009 04:29:53 Rusty Russell wrote:
> On Mon, 23 Nov 2009 07:31:57 am Ondrej Zary wrote:
> > The problem is that
> > scripts/mod/file2alias.c simply ignores isapnp.
>
> AFAICT it always has, and noone has complained until now.  Perhaps
> something was still reading /lib/modules/`uname -r`/modules.isapnpmap?

The patch below works fine (at least with Debian). It needs your first
patch that moves the definitions to mod_devicetable.h. Verified that
aliases for these modules are generated correctly:

drivers/media/radio/radio-sf16fmi.c
drivers/net/ne.c
drivers/net/3c515.c
drivers/net/smc-ultra.c
drivers/pcmcia/i82365.c
drivers/scsi/aha1542.c
drivers/scsi/aha152x.c
drivers/scsi/sym53c416.c
drivers/scsi/g_NCR5380.c

Tested with RTL8019AS (ne), AVA-1505AE (aha152x) and dtc436e (g_NCR5380)
cards - they now work automatically.

Generate pnp:d aliases for isapnp_device_tables. This allows udev to load
these modules automatically.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Add Amiga Zorro bus modalias and uevent support
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

There's a button in gconfig to "Show all options", but I think
normally we are not interested in those configs which have no
prompt and thus can't be changed, so here I add a new button to
show hidden options which have prompts.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Usage:
  Press <Z> to show all config symbols which have prompts.

Quote Tim Bird:

| I've been bitten by this numerous times.  I most often
| use ftrace on ARM, but when I go back to x86, I almost
| always go through a sequence of searching for the
| function graph tracer in the menus, then realizing it's
| completely missing until I disable CC_OPTIMIZE_FOR_SIZE.
|
| Is there any way to have the menu item appear, but be
| unsettable unless the SIZE option is disabled?  I'm
| not a Kconfig guru...

I myself found this useful too. For example, I need to test
ftrace/tracing and want to be sure all the tracing features are
enabled, so I  enter the "Tracers" menu, and press <Z> to
see if there is any config hidden.

I also noticed gconfig and xconfig have a button "Show all options",
but that's a bit too much, and I think normally what we are not
interested in those configs which have no prompt thus can't be
changed by users.

Exmaple:

      --- Tracers
      -*-   Kernel Function Tracer
      - -     Kernel Function Graph Tracer
      [*]   Interrupts-off Latency Tracer
      - -   Preemption-off Latency Tracer
      [*]   Sysprof Tracer

Here you can see 2 tracers are not selectable, and then can find
out how to make them selectable.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

This option is a no-op, so remove it.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Just use sym_get_type() and prop_get_type_name().
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

zconfdump(), which is used for debugging, can't recognize P_SELECT,
P_RANGE and P_MENU (if associated with a symbol, aka "menuconfig"),
and output something like this:

config X86
  boolean
  default y
  unknown prop 6!
  unknown prop 6!
  unknown prop 6!
  ...
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

- fix a typo in documentation
- fix a typo in a printk on error
- fix comments in dialog_inputbox()
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Add support for the hardware version of the Hamming weight function,
popcnt, present in CPUs which advertize it under CPUID, Function
0x0000_0001_ECX[23]. On CPUs which don't support it, we fallback to the
default lib/hweight.c sw versions.

A synthetic benchmark comparing popcnt with __sw_hweight64 showed almost
a 3x speedup on a F10h machine.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20100318112015.GC11152@aftab>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

We don't use the normal hotplug mechanism because it doesn't work. It will
load the module some time after the device appears, but that's not good
enough for us -- we need the driver loaded _immediately_ because otherwise
the NIC driver may just abort and then the phy 'device' goes away.

[bwh: s/phy/mdio/ in module alias, kerneldoc for struct mdio_device_id]
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Acked-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NGilles Espinasse <g.esp@free.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix a fatal error in scripts/kernel-doc when a function signature uses
__init_or_module (just ignore that string):

Error(drivers/base/platform.c:568): cannot understand prototype: 'struct platform_device * __init_or_module platform_create_bundle(struct platform_driver *driver, int (*probe)(struct platform_device *), struct resource *res, unsigned int n_res, const void *data, size_t size) '
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 22dd5b0c (fix perlcritic warnings)
broke the ability to handle STDIN because the three argument version of
open() cannot handle standard IO-streams (which is mentioned in
PerlBestPractices, too).
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

scripts/kernel-doc erroneously says:

Warning(include/linux/skbuff.h:410): Excess struct/union/enum/typedef member 'cb' description in 'sk_buff'

on this line in struct sk_buff:
	char			cb[48] __aligned(8);

due to treating the last field as the struct member name, so teach
kernel-doc to ignore __aligned(x) in structs.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Expand the dependency set used for the initrd to include the
CONFIG_INITRAMFS_SOURCE file and the generator script itself.
Otherwise changing the initramfs file list does not rebuild the CPIO.
Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

A symbol's value won't be recalc-ed until we save config file or
enter the menu where the symbol sits.

So If I enable OPTIMIZE_FOR_SIZE, and search FUNCTION_GRAPH_TRACER:

  Symbol: FUNCTION_GRAPH_TRACER [=y]
  Prompt: Kernel Function Graph Tracer
    Defined at kernel/trace/Kconfig:140
    Depends on: ... [=y] && (!X86_32 [=y] || !CC_OPTIMIZE_FOR_SIZE [=y])
    ...

From the dependency it should result in FUNCTION_GRAPH_TRACER=n,
but it still shows FUNCTION_GRAPH_TRACER=y.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Minor perlcritic warning:
headerdep.pl: "return" statement with explicit "undef" at line 84, column 2.  See page 199 of PBP.  (Severity: 5)

The rationale according to PBP is that an explicit return of undef
(contrary to most people's expectations) doesn't
always evaluate as false. It has to with the fact that perl return value
depends on context the function is called. If function is used in
list context, the appropriate return value for false is an empty list;
whereas in scalar context the return value for false is undefined.
By just using a "return" both cases are handled.

In the context of a trivial script this doesn't matter. But one script
may be cut-paste into later code (most people like me only know 50%
of perl), that is why perlcritic always complains
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>