- 28 2月, 2013 22 次提交
-
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: NJoel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Note that the adhoc cyclic id allocation is buggy. If wraparound happens, the previous code with idr_get_new_above() may segfault and the converted code will trigger WARN and return -EINVAL. Even if it's fixed to wrap to zero, the code will be prone to unnecessary -ENOSPC failures after the first wraparound. We probably need to implement proper cyclic support in idr. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Error return values from recover_idr_add() mix -1 and -errno. The conversion doesn't change that but it looks iffy. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop reference to idr_remove_all(). Note that the code wasn't completely correct before because idr_remove() on all entries doesn't necessarily release all idr_layers which could lead to memory leak. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. The conversion isn't completely trivial for recover_idr_clear() as it's the only place in kernel which makes legitimate use of idr_remove_all() w/o idr_destroy(). Replace it with idr_remove() call inside idr_for_each_entry() loop. It goes on top so that it matches the operation order in recover_idr_del(). Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Christine Caulfield <ccaulfie@redhat.com> Cc: David Teigland <teigland@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert recover_idr_clear() to use idr_for_each_entry() instead of idr_for_each(). It's somewhat less efficient this way but it shouldn't matter in an error path. This is to help with deprecation of idr_remove_all(). Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Christine Caulfield <ccaulfie@redhat.com> Cc: David Teigland <teigland@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
[akpm@linux-foundation.org: checkpatch fixes] Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyrill Gorcunov 提交于
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Yanfei 提交于
In read_vmcore() two `if' tests are duplicated. Change the position of them could reduce the duplication. This change does not affect the behaviour of the function. [akpm@linux-foundation.org: avoid `if (foo = bar)' thing, use min_t()] [akpm@linux-foundation.org: s/max_t/min_t/] Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
- use pr_foo() throughout - remove a couple of duplicated KERN_WARNINGs, via WARN(KERN_WARNING "...") - nuke a few warnings which I've never seen happen, ever. Cc: Joe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
The existing SUID_DUMP_* defines duplicate the newer SUID_DUMPABLE_* defines introduced in 54b50199 ("coredump: warn about unsafe suid_dumpable / core_pattern combo"). Remove the new ones, and use the prior values instead. Signed-off-by: NKees Cook <keescook@chromium.org> Reported-by: NChen Gang <gang.chen@asianux.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alan Cox <alan@linux.intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: James Morris <james.l.morris@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleksij Rempel 提交于
There is no documented methods to mark FAT as dirty. Unofficially MS started to use reserved Byte in boot sector for this purpose, at least since Win 2000. With Win 7 user is warned if fs is dirty and asked to clean it. Different versions of Win, handle it in different ways, but always have same meaning: - Win 2000 and XP, set it on write operations and remove it after operation was finnished - Win 7, set dirty flag on first write and remove it on umount. We will do it as follows: - set dirty flag on mount. If fs was initially dirty, warn user, remember it and do not do any changes to boot sector. - clean it on umount. If fs was initially dirty, leave it dirty. - do not do any thing if fs mounted read-only. - TODO: leave fs dirty if we found some error after mount. Signed-off-by: NOleksij Rempel <bug-track@fisher-privat.net> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleksij Rempel 提交于
Later we will need "state" field to check if volume was cleanly unmounted. Signed-off-by: NOleksij Rempel <bug-track@fisher-privat.net> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vyacheslav Dubeyko 提交于
The fsck_hfs (under MacOS X) complains about unzeroed unused b-tree nodes after deletion of folders' tree under Linux. SYMPTOMS: Running Disk Utiltiy's "Verify Disk" on "test" gives the following: Verifying volume “Test” Checking file systemChecking Journaled HFS Plus volume. Checking extents overflow file. Checking catalog file. Unused node is not erased (node = 3111) Checking multi-linked files. Checking catalog hierarchy. Checking extended attributes file. Checking volume bitmap. Checking volume information. The volume Test was found corrupt and needs to be repaired. Error: This disk needs to be repaired. Click Repair Disk. REPRODUCING PATH: 1. Prepare HFS+ (non-case sensitive) partition (for example, 5GB) under MacOS X. 2. Copy linux kernel source tree (for example, 3.7-rc6 version) on this partition under MacOS X. 3. Then switch to Linux and mount this prepared partition. 4. Execute `sudo rm -r` under prepared directory with linux kernel source tree. 5. Unmount and boot back into OS X. 6. Open up Disk Utility and verify partition. REPRODUCIBILITY: 100% FIX: It is added code of node clearing in hfs_bnode_put() method for the case when node has flag HFS_BNODE_DELETED. Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com> Reported-by: NKyle Laracey <kalaracey@gmail.com> Acked-by: NHin-Tak Leung <htl10@users.sourceforge.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vyacheslav Dubeyko 提交于
Add support of manipulation by attributes file. Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com> Reported-by: NHin-Tak Leung <htl10@users.sourceforge.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vyacheslav Dubeyko 提交于
Rework functionality of getting, setting and deleting of extended attributes. Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com> Reported-by: NHin-Tak Leung <htl10@users.sourceforge.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vyacheslav Dubeyko 提交于
Add functionality of manipulating by records in attributes tree. Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com> Reported-by: NHin-Tak Leung <htl10@users.sourceforge.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vyacheslav Dubeyko 提交于
Add all necessary on-disk layout declarations related to attributes file. Signed-off-by: NVyacheslav Dubeyko <slava@dubeyko.com> Reported-by: NHin-Tak Leung <htl10@users.sourceforge.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xiaowei.Hu 提交于
ocfs2_block_group_alloc_discontig() disables chain relink by setting ac->ac_allow_chain_relink = 0 because it grabs clusters from multiple cluster groups. It doesn't keep the credits for all chain relink,but ocfs2_claim_suballoc_bits overrides this in this call trace: ocfs2_block_group_claim_bits()->ocfs2_claim_clusters()-> __ocfs2_claim_clusters()->ocfs2_claim_suballoc_bits() ocfs2_claim_suballoc_bits set ac->ac_allow_chain_relink = 1; then call ocfs2_search_chain() one time and disable it again, and then we run out of credits. Fix is to allow relink by default and disable it in ocfs2_block_group_alloc_discontig. Without this patch, End-users will run into a crash due to run out of credits, backtrace like this: RIP: 0010:[<ffffffffa0808b14>] [<ffffffffa0808b14>] jbd2_journal_dirty_metadata+0x164/0x170 [jbd2] RSP: 0018:ffff8801b919b5b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88022139ddc0 RCX: ffff880159f652d0 RDX: ffff880178aa3000 RSI: ffff880159f652d0 RDI: ffff880087f09bf8 RBP: ffff8801b919b5e8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000001e00 R11: 00000000000150b0 R12: ffff880159f652d0 R13: ffff8801a0cae908 R14: ffff880087f09bf8 R15: ffff88018d177800 FS: 00007fc9b0b6b6e0(0000) GS:ffff88022fd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000040819c CR3: 0000000184017000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process dd (pid: 9945, threadinfo ffff8801b919a000, task ffff880149a264c0) Call Trace: ocfs2_journal_dirty+0x2f/0x70 [ocfs2] ocfs2_relink_block_group+0x111/0x480 [ocfs2] ocfs2_search_chain+0x455/0x9a0 [ocfs2] ... Signed-off-by: NXiaowei.Hu <xiaowei.hu@oracle.com> Reviewed-by: NSrinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Liu 提交于
We need to re-initialize the security for a new reflinked inode with its parent dirs if it isn't specified to be preserved for ocfs2_reflink(). However, the code logic is broken at ocfs2_init_security_and_acl() although ocfs2_init_security_get() succeed. As a result, ocfs2_acl_init() does not involked and therefore the default ACL of parent dir was missing on the new inode. Note this was introduced by 9d8f13ba ("security: new security_inode_init_security API adds function callback") To reproduce: set default ACL for the parent dir(ocfs2 in this case): $ setfacl -m default:user:jeff:rwx ../ocfs2/ $ getfacl ../ocfs2/ # file: ../ocfs2/ # owner: jeff # group: jeff user::rwx group::r-x other::r-x default:user::rwx default:user:jeff:rwx default:group::r-x default:mask::rwx default:other::r-x $ touch a $ getfacl a # file: a # owner: jeff # group: jeff user::rw- group::rw- other::r-- Before patching, create reflink file b from a, the user default ACL entry(user:jeff:rwx)was missing: $ ./ocfs2_reflink a b $ getfacl b # file: b # owner: jeff # group: jeff user::rw- group::rw- other::r-- In this case, the end user can also observed an error message at syslog: (ocfs2_reflink,3229,2):ocfs2_init_security_and_acl:7193 ERROR: status = 0 After applying this patch, create reflink file c from a: $ ./ocfs2_reflink a c $ getfacl c # file: c # owner: jeff # group: jeff user::rw- user:jeff:rwx #effective:rw- group::r-x #effective:r-- mask::rw- other::r-- Test program: /* Usage: reflink <source> <dest> */ #include <stdio.h> #include <stdint.h> #include <stdbool.h> #include <string.h> #include <errno.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <sys/ioctl.h> static int reflink_file(char const *src_name, char const *dst_name, bool preserve_attrs) { int fd; #ifndef REFLINK_ATTR_NONE # define REFLINK_ATTR_NONE 0 #endif #ifndef REFLINK_ATTR_PRESERVE # define REFLINK_ATTR_PRESERVE 1 #endif #ifndef OCFS2_IOC_REFLINK struct reflink_arguments { uint64_t old_path; uint64_t new_path; uint64_t preserve; }; # define OCFS2_IOC_REFLINK _IOW ('o', 4, struct reflink_arguments) #endif struct reflink_arguments args = { .old_path = (unsigned long) src_name, .new_path = (unsigned long) dst_name, .preserve = preserve_attrs ? REFLINK_ATTR_PRESERVE : REFLINK_ATTR_NONE, }; fd = open(src_name, O_RDONLY); if (fd < 0) { fprintf(stderr, "Failed to open %s: %s\n", src_name, strerror(errno)); return -1; } if (ioctl(fd, OCFS2_IOC_REFLINK, &args) < 0) { fprintf(stderr, "Failed to reflink %s to %s: %s\n", src_name, dst_name, strerror(errno)); return -1; } } int main(int argc, char *argv[]) { if (argc != 3) { fprintf(stdout, "Usage: %s source dest\n", argv[0]); return 1; } return reflink_file(argv[1], argv[2], 0); } Signed-off-by: NJie Liu <jeff.liu@oracle.com> Reviewed-by: NTao Ma <boyu.mt@taobao.com> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 2月, 2013 18 次提交
-
-
由 Al Viro 提交于
Make it drop the pde in *all* cases when no new reference to it is put into an inode - both when an inode had already been set up (as we were already doing) and when inode allocation has failed. Makes for simpler logics in callers... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Maxim Patlasov 提交于
If proc_get_inode() succeeded, but d_make_root() failed, pde_put() for proc_root will be called twice: the first time due to iput() called from d_make_root() and the second time directly in the end of proc_fill_super(). Signed-off-by: NMaxim Patlasov <mpatlasov@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Zhao Hongjiang 提交于
According to SUSv3: [EACCES] Permission denied. An attempt was made to access a file in a way forbidden by its file access permissions. [EPERM] Operation not permitted. An attempt was made to perform an operation limited to processes with appropriate privileges or to the owner of a file or other resource. So -EPERM should be returned if capability checks fails. Strictly speaking this is an API change since the error code user sees is altered. Signed-off-by: NZhao Hongjiang <zhaohongjiang@huawei.com> Acked-by: NJan Kara <jack@suse.cz> Acked-by: NSteven Whitehouse <swhiteho@redhat.com> Acked-by: NIan Kent <raven@themaw.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Yuanhan Liu 提交于
There is only one user of bprm_mm_init, and it's inside the same file. Signed-off-by: NYuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dan Carpenter 提交于
My static checker complains that this is called with a spin_lock held in dlm_master_requery_handler() from dlmrecovery.c. Probably the reason we have not received any bug reports about this is that recovery is not a common operation. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJoel Becker <jlbec@evilplan.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jan Kara 提交于
Running AIO is pinning inode in memory using file reference. Once AIO is completed using aio_complete(), file reference is put and inode can be freed from memory. So we have to be sure that calling aio_complete() is the last thing we do with the inode. Signed-off-by: NJan Kara <jack@suse.cz> Acked-by: NJeff Moyer <jmoyer@redhat.com> Acked-by: NJoel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Sunil Mushran 提交于
Commit ea022dfb was missing a var init. Reported-and-Tested-by: NVincent Etienne <vetienne@aprogsys.com> Signed-off-by: NSunil Mushran <sunil.mushran@gmail.com> Signed-off-by: NJoel Becker <jlbec@evilplan.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Namjae Jeon 提交于
This patch is a follow up on below patch: [PATCH] exportfs: add FILEID_INVALID to indicate invalid fid_type commit: 216b6cbdSigned-off-by: NNamjae Jeon <namjae.jeon@samsung.com> Signed-off-by: NVivek Trivedi <t.vivek@samsung.com> Acked-by: NSteven Whitehouse <swhiteho@redhat.com> Acked-by: NSage Weil <sage@inktank.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
very few users left... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jeff Layton 提交于
The following set of operations on a NFS client and server will cause server# mkdir a client# cd a server# mv a a.bak client# sleep 30 # (or whatever the dir attrcache timeout is) client# stat . stat: cannot stat `.': Stale NFS file handle Obviously, we should not be getting an ESTALE error back there since the inode still exists on the server. The problem is that the lookup code will call d_revalidate on the dentry that "." refers to, because NFS has FS_REVAL_DOT set. nfs_lookup_revalidate will see that the parent directory has changed and will try to reverify the dentry by redoing a LOOKUP. That of course fails, so the lookup code returns ESTALE. The problem here is that d_revalidate is really a bad fit for this case. What we really want to know at this point is whether the inode is still good or not, but we don't really care what name it goes by or whether the dcache is still valid. Add a new d_op->d_weak_revalidate operation and have complete_walk call that instead of d_revalidate. The intent there is to allow for a "weaker" d_revalidate that just checks to see whether the inode is still good. This is also gives us an opportunity to kill off the FS_REVAL_DOT special casing. [AV: changed method name, added note in porting, fixed confusion re having it possibly called from RCU mode (it won't be)] Cc: NeilBrown <neilb@suse.de> Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 J. Bruce Fields 提交于
We're currently ignoring errors from vfs_getattr. The correct thing to do is to do the stat in the main service procedure not in the response encoding. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Sage Weil 提交于
If r_aborted is true, we do not hold the dir i_mutex, and cannot touch the dcache. However, we still need to update the inodes with the state returned by the MDS. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NSage Weil <sage@inktank.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* calling conventions change - ERR_PTR() is returned on ->d_hash() errors; NULL is just for dcache miss now. * exported, open-coded instances in ncpfs and cifs converted. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-