- 25 7月, 2020 1 次提交
-
-
由 Pavel Begunkov 提交于
req->work might be already initialised by the time it gets into __io_arm_poll_handler(), which will corrupt it by using fields that are in an union with req->work. Luckily, the only side effect is missing put_creds(). Clean req->work before going there. Suggested-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 24 7月, 2020 1 次提交
-
-
由 Pavel Begunkov 提交于
IOSQE_ASYNC branch of io_queue_sqe() is another place where an unitialised req->work can be accessed (i.e. prior io_req_init_async()). Nothing really bad though, it just looses IO_WQ_WORK_CONCURRENT flag. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 19 7月, 2020 1 次提交
-
-
由 Daniele Albano 提交于
We currently filter these for timeout_remove/async_cancel/files_update, but we only should be filtering for fixed file and buffer select. This also causes a second read of sqe->flags, which isn't needed. Just check req->flags for the relevant bits. This then allows these commands to be used in links, for example, like everything else. Signed-off-by: NDaniele Albano <d.albano@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 18 7月, 2020 1 次提交
-
-
由 Jens Axboe 提交于
The double poll additions were centered around doing POLL_ADD on file descriptors that use more than one waitqueue (typically one for read, one for write) when being polled. However, it can also end up being triggered for when we use poll triggered retry. For that case, we cannot safely use req->io, as that could be used by the request type itself. Add a second io_poll_iocb pointer in the structure we allocate for poll based retry, and ensure we use the right one from the two paths. Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 16 7月, 2020 1 次提交
-
-
由 Pavel Begunkov 提交于
io_recvmsg() doesn't free memory allocated for struct io_buffer. This can causes a leak when used with automatic buffer selection. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 12 7月, 2020 2 次提交
-
-
由 Pavel Begunkov 提交于
59960b9d ("io_uring: fix lazy work init") tried to fix missing io_req_init_async(), but left out work.flags and hash. Do it earlier. Fixes: 7cdaf587 ("io_uring: avoid whole io_wq_work copy for requests completed inline") Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
Ensure to set msg.msg_name for the async portion of send/recvmsg, as the header copy will copy to/from it. Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 10 7月, 2020 2 次提交
-
-
由 Jens Axboe 提交于
We currently account the memory after the exit work has been run, but that leaves a gap where a process has closed its ring and until the memory has been accounted as freed. If the memlocked ulimit is borderline, then that can introduce spurious setup errors returning -ENOMEM because the free work hasn't been run yet. Account this as freed when we close the ring, as not to expose a tiny gap where setting up a new ring can fail. Fixes: 85faa7b8 ("io_uring: punt final io_ring_ctx wait-and-free to workqueue") Cc: stable@vger.kernel.org # v5.7 Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Yang Yingliang 提交于
I got a memleak report when doing some fuzz test: BUG: memory leak unreferenced object 0x607eeac06e78 (size 8): comm "test", pid 295, jiffies 4294735835 (age 31.745s) hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace: [<00000000932632e6>] percpu_ref_init+0x2a/0x1b0 [<0000000092ddb796>] __io_uring_register+0x111d/0x22a0 [<00000000eadd6c77>] __x64_sys_io_uring_register+0x17b/0x480 [<00000000591b89a6>] do_syscall_64+0x56/0xa0 [<00000000864a281d>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Call percpu_ref_exit() on error path to avoid refcount memleak. Fixes: 05f3fb3c ("io_uring: avoid ring quiesce for fixed file set unregister and update") Cc: stable@vger.kernel.org Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 09 7月, 2020 2 次提交
-
-
由 Yang Yingliang 提交于
I got a memleak report when doing some fuzz test: BUG: memory leak unreferenced object 0xffff888113e02300 (size 488): comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ a0 a4 ce 19 81 88 ff ff 60 ce 09 0d 81 88 ff ff ........`....... backtrace: [<00000000129a84ec>] kmem_cache_zalloc include/linux/slab.h:659 [inline] [<00000000129a84ec>] __alloc_file+0x25/0x310 fs/file_table.c:101 [<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151 [<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193 [<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233 [<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74 [<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720 [<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 BUG: memory leak unreferenced object 0xffff8881152dd5e0 (size 16): comm "syz-executor401", pid 356, jiffies 4294809529 (age 11.954s) hex dump (first 16 bytes): 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000074caa794>] kmem_cache_zalloc include/linux/slab.h:659 [inline] [<0000000074caa794>] lsm_file_alloc security/security.c:567 [inline] [<0000000074caa794>] security_file_alloc+0x32/0x160 security/security.c:1440 [<00000000c6745ea3>] __alloc_file+0xba/0x310 fs/file_table.c:106 [<000000003050ad84>] alloc_empty_file+0x4f/0x120 fs/file_table.c:151 [<000000004d0a41a3>] alloc_file+0x5e/0x550 fs/file_table.c:193 [<000000002cb242f0>] alloc_file_pseudo+0x16a/0x240 fs/file_table.c:233 [<00000000046a4baa>] anon_inode_getfile fs/anon_inodes.c:91 [inline] [<00000000046a4baa>] anon_inode_getfile+0xac/0x1c0 fs/anon_inodes.c:74 [<0000000035beb745>] __do_sys_perf_event_open+0xd4a/0x2680 kernel/events/core.c:11720 [<0000000049009dc7>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<00000000353731ca>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 If io_sqe_file_register() failed, we need put the file that get by fget() to avoid the memleak. Fixes: c3a31e60 ("io_uring: add support for IORING_REGISTER_FILES_UPDATE") Cc: stable@vger.kernel.org Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NYang Yingliang <yangyingliang@huawei.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Xiaoguang Wang 提交于
For those applications which are not willing to use io_uring_enter() to reap and handle cqes, they may completely rely on liburing's io_uring_peek_cqe(), but if cq ring has overflowed, currently because io_uring_peek_cqe() is not aware of this overflow, it won't enter kernel to flush cqes, below test program can reveal this bug: static void test_cq_overflow(struct io_uring *ring) { struct io_uring_cqe *cqe; struct io_uring_sqe *sqe; int issued = 0; int ret = 0; do { sqe = io_uring_get_sqe(ring); if (!sqe) { fprintf(stderr, "get sqe failed\n"); break;; } ret = io_uring_submit(ring); if (ret <= 0) { if (ret != -EBUSY) fprintf(stderr, "sqe submit failed: %d\n", ret); break; } issued++; } while (ret > 0); assert(ret == -EBUSY); printf("issued requests: %d\n", issued); while (issued) { ret = io_uring_peek_cqe(ring, &cqe); if (ret) { if (ret != -EAGAIN) { fprintf(stderr, "peek completion failed: %s\n", strerror(ret)); break; } printf("left requets: %d\n", issued); continue; } io_uring_cqe_seen(ring, cqe); issued--; printf("left requets: %d\n", issued); } } int main(int argc, char *argv[]) { int ret; struct io_uring ring; ret = io_uring_queue_init(16, &ring, 0); if (ret) { fprintf(stderr, "ring setup failed: %d\n", ret); return 1; } test_cq_overflow(&ring); return 0; } To fix this issue, export cq overflow status to userspace by adding new IORING_SQ_CQ_OVERFLOW flag, then helper functions() in liburing, such as io_uring_peek_cqe, can be aware of this cq overflow and do flush accordingly. Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 05 7月, 2020 1 次提交
-
-
由 Jens Axboe 提交于
When switching to TWA_SIGNAL for task_work notifications, we also made any signal based condition in io_cqring_wait() return -ERESTARTSYS. This breaks applications that rely on using signals to abort someone waiting for events. Check if we have a signal pending because of queued task_work, and repeat the signal check once we've run the task_work. This provides a reliable way of telling the two apart. Additionally, only use TWA_SIGNAL if we are using an eventfd. If not, we don't have the dependency situation described in the original commit, and we can get by with just using TWA_RESUME like we previously did. Fixes: ce593a6c ("io_uring: use signal based task_work running") Cc: stable@vger.kernel.org # v5.7 Reported-by: NAndres Freund <andres@anarazel.de> Tested-by: NAndres Freund <andres@anarazel.de> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 01 7月, 2020 2 次提交
-
-
由 Jens Axboe 提交于
Since 5.7, we've been using task_work to trigger async running of requests in the context of the original task. This generally works great, but there's a case where if the task is currently blocked in the kernel waiting on a condition to become true, it won't process task_work. Even though the task is woken, it just checks whatever condition it's waiting on, and goes back to sleep if it's still false. This is a problem if that very condition only becomes true when that task_work is run. An example of that is the task registering an eventfd with io_uring, and it's now blocked waiting on an eventfd read. That read could depend on a completion event, and that completion event won't get trigged until task_work has been run. Use the TWA_SIGNAL notification for task_work, so that we ensure that the task always runs the work when queued. Cc: stable@vger.kernel.org # v5.7 Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Oleg Nesterov 提交于
So that the target task will exit the wait_event_interruptible-like loop and call task_work_run() asap. The patch turns "bool notify" into 0,TWA_RESUME,TWA_SIGNAL enum, the new TWA_SIGNAL flag implies signal_wake_up(). However, it needs to avoid the race with recalc_sigpending(), so the patch also adds the new JOBCTL_TASK_WORK bit included in JOBCTL_PENDING_MASK. TODO: once this patch is merged we need to change all current users of task_work_add(notify = true) to use TWA_RESUME. Cc: stable@vger.kernel.org # v5.7 Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 25 6月, 2020 2 次提交
-
-
由 Pavel Begunkov 提交于
Don't reissue requests from io_iopoll_reap_events(), the task may not have mm, which ends up with NULL. It's better to kill everything off on exit anyway. [ 677.734670] RIP: 0010:io_iopoll_complete+0x27e/0x630 ... [ 677.734679] Call Trace: [ 677.734695] ? __send_signal+0x1f2/0x420 [ 677.734698] ? _raw_spin_unlock_irqrestore+0x24/0x40 [ 677.734699] ? send_signal+0xf5/0x140 [ 677.734700] io_iopoll_getevents+0x12f/0x1a0 [ 677.734702] io_iopoll_reap_events.part.0+0x5e/0xa0 [ 677.734703] io_ring_ctx_wait_and_kill+0x132/0x1c0 [ 677.734704] io_uring_release+0x20/0x30 [ 677.734706] __fput+0xcd/0x230 [ 677.734707] ____fput+0xe/0x10 [ 677.734709] task_work_run+0x67/0xa0 [ 677.734710] do_exit+0x35d/0xb70 [ 677.734712] do_group_exit+0x43/0xa0 [ 677.734713] get_signal+0x140/0x900 [ 677.734715] do_signal+0x37/0x780 [ 677.734717] ? enqueue_hrtimer+0x41/0xb0 [ 677.734718] ? recalibrate_cpu_khz+0x10/0x10 [ 677.734720] ? ktime_get+0x3e/0xa0 [ 677.734721] ? lapic_next_deadline+0x26/0x30 [ 677.734723] ? tick_program_event+0x4d/0x90 [ 677.734724] ? __hrtimer_get_next_event+0x4d/0x80 [ 677.734726] __prepare_exit_to_usermode+0x126/0x1c0 [ 677.734741] prepare_exit_to_usermode+0x9/0x40 [ 677.734742] idtentry_exit_cond_rcu+0x4c/0x60 [ 677.734743] sysvec_reschedule_ipi+0x92/0x160 [ 677.734744] ? asm_sysvec_reschedule_ipi+0xa/0x20 [ 677.734745] asm_sysvec_reschedule_ipi+0x12/0x20 Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
io_do_iopoll() won't do anything with a request unless req->iopoll_completed is set. So io_complete_rw_iopoll() has to set it, otherwise io_do_iopoll() will poll a file again and again even though the request of interest was completed long time ago. Also, remove -EAGAIN check from io_issue_sqe() as it races with the changed lines. The request will take the long way and be resubmitted from io_iopoll*(). io_kiocb's result and iopoll_completed") Fixes: bbde017a ("io_uring: add memory barrier to synchronize Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 24 6月, 2020 1 次提交
-
-
由 Xuan Zhuo 提交于
When the user consumes and generates sqe at a fast rate, io_sqring_entries can always get sqe, and ret will not be equal to -EBUSY, so that io_sq_thread will never call cond_resched or schedule, and then we will get the following system error prompt: rcu: INFO: rcu_sched self-detected stall on CPU or watchdog: BUG: soft lockup-CPU#23 stuck for 112s! [io_uring-sq:1863] This patch checks whether need to call cond_resched() by checking the need_resched() function every cycle. Suggested-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NXuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 22 6月, 2020 7 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux由 Linus Torvalds 提交于
Pull SELinux fixes from Paul Moore: "Three small patches to fix problems in the SELinux code, all found via clang. Two patches fix potential double-free conditions and one fixes an undefined return value" * tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix undefined return of cond_evaluate_expr selinux: fix a double free in cond_read_node()/cond_read_list() selinux: fix double free
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control fixes from Linus Walleij: "Some early fixes collected during the first week after the merge window, all pretty self-evident, with the details below. The revert is the crucial thing. - Fix a warning on the Qualcomm SPMI GPIO chip being instatiated twice without a unique irqchip struct - Use the noirq variants of the suspend and resume callbacks in the Tegra driver - Clean up the errorpath on the MCP23s08 driver - Revert the use of devm_of_iomap() in the Freescale driver as it was regressing the platform - Add some missing pins in the Qualcomm IPQ6018 driver - Fix a simple documentation bug in the pinctrl-single driver" * tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: single: fix function name in documentation pinctrl: qcom: ipq6018 Add missing pins in qpic pin group Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'" pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings pinctrl: tegra: Use noirq suspend/resume callbacks pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage
-
由 Linus Torvalds 提交于
Merge tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED - improve cc-option in scripts/Kbuild.include to clean up temp files - improve cc-option in scripts/Kconfig.include for more reliable compile option test - do not copy modules.builtin by 'make install' because it would break existing systems - use 'userprogs' syntax for watch_queue sample * tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: samples: watch_queue: build sample program for target architecture Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n" scripts: Fix typo in headers_install.sh kconfig: unify cc-option and as-option kbuild: improve cc-option to clean up all temporary files Makefile: Improve compressed debug info support detection
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - One fix for the interrupt rework we did last release which broke KVM-PR - Three commits fixing some fallout from the READ_ONCE() changes interacting badly with our 8xx 16K pages support, which uses a pte_t that is a structure of 4 actual PTEs - A cleanup of the 8xx pte_update() to use the newly added pmd_off() - A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is enabled - A minor fix for the SPU syscall generation Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike Rapoport, Nicholas Piggin. * tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/8xx: Provide ptep_get() with 16k pages mm: Allow arches to provide ptep_get() mm/gup: Use huge_ptep_get() in gup_hugepte() powerpc/syscalls: Use the number when building SPU syscall table powerpc/8xx: use pmd_off() to access a PMD entry in pte_update() powerpc/64s: Fix KVM interrupt using wrong save area powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: - NULL dereference in octeontx - PM reference imbalance in ks-sa - deadlock in crypto manager - memory leak in drbg - missing socket limit check on receive SG list size in algif_skcipher - typos in caam - warnings in ccp and hisilicon * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: drbg - always try to free Jitter RNG instance crypto: marvell/octeontx - Fix a potential NULL dereference crypto: algboss - don't wait during notifier callback crypto: caam - fix typos crypto: ccp - Fix sparse warnings in sev-dev crypto: hisilicon - Cap block size at 2^31 crypto: algif_skcipher - Cap recv SG list at ctx->used hwrng: ks-sa - Fix runtime PM imbalance on error
-
由 Masahiro Yamada 提交于
This userspace program includes UAPI headers exported to usr/include/. 'make headers' always works for the target architecture (i.e. the same architecture as the kernel), so the sample program should be built for the target as well. Kbuild now supports 'userprogs' for that. I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because $(CC) may not provide libc. Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
-
- 21 6月, 2020 13 次提交
-
-
由 Masahiro Yamada 提交于
This reverts commit e0b250b5, which broke build systems that need to install files to a certain path, but do not set INSTALL_MOD_PATH when invoking 'make install'. $ make INSTALL_PATH=/tmp/destdir install mkdir: cannot create directory ‘/lib/modules/5.8.0-rc1+/’: Permission denied Makefile:1342: recipe for target '_builtin_inst_' failed make: *** [_builtin_inst_] Error 1 While modules.builtin is useful also for CONFIG_MODULES=n, this change in the behavior is quite unexpected. Maybe "make modules_install" can install modules.builtin irrespective of CONFIG_MODULES as Jonas originally suggested. Anyway, that commit should be reverted ASAP. Reported-by: NDouglas Anderson <dianders@chromium.org> Reported-by: NGuenter Roeck <linux@roeck-us.net> Cc: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Tested-by: NGuenter Roeck <linux@roeck-us.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "One minor fix and two patches reworking the ata dma drain for the !CONFIG_LIBATA case. The latter is a 5.7 regression fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA scsi: ufs-bsg: Fix runtime PM imbalance on error
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: - a small collection of remaining API conversion patches (all acked) which allow to finally remove the deprecated API - some documentation fixes and a MAINTAINERS addition * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Add robert and myself as qcom i2c cci maintainers i2c: smbus: Fix spelling mistake in the comments Documentation/i2c: SMBus start signal is S not A i2c: remove deprecated i2c_new_device API Documentation: media: convert to use i2c_new_client_device() video: backlight: tosa_lcd: convert to use i2c_new_client_device() x86/platform/intel-mid: convert to use i2c_new_client_device() drm: encoder_slave: use new I2C API drm: encoder_slave: fix refcouting error for modules
-
由 Drew Fustini 提交于
Use the correct the function name in the documentation for "pcs_parse_one_pinctrl_entry()". "smux_parse_one_pinctrl_entry()" appears to be an artifact from the development of a prior patch series ("simple pinmux driver") which transformed into pinctrl-single. Signed-off-by: NDrew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20200612112758.GA3407886@x1Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fixes from Steven Rostedt: - Have recordmcount work with > 64K sections (to support LTO) - kprobe RCU fixes - Correct a kprobe critical section with missing mutex - Remove redundant arch_disarm_kprobe() call - Fix lockup when kretprobe triggers within kprobe_flush_task() - Fix memory leak in fetch_op_data operations - Fix sleep in atomic in ftrace trace array sample code - Free up memory on failure in sample trace array code - Fix incorrect reporting of function_graph fields in format file - Fix quote within quote parsing in bootconfig - Fix return value of bootconfig tool - Add testcases for bootconfig tool - Fix maybe uninitialized warning in ftrace pid file code - Remove unused variable in tracing_iter_reset() - Fix some typos * tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix maybe-uninitialized compiler warning tools/bootconfig: Add testcase for show-command and quotes test tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig tools/bootconfig: Fix to use correct quotes for value proc/bootconfig: Fix to use correct quotes for value tracing: Remove unused event variable in tracing_iter_reset tracing/probe: Fix memleak in fetch_op_data operations trace: Fix typo in allocate_ftrace_ops()'s comment tracing: Make ftrace packed events have align of 1 sample-trace-array: Remove trace_array 'sample-instance' sample-trace-array: Fix sleeping function called from invalid context kretprobe: Prevent triggering kretprobe from within kprobe_flush_task kprobes: Remove redundant arch_disarm_kprobe() call kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex kprobes: Use non RCU traversal APIs on kprobe_tables if possible kprobes: Suppress the suspicious RCU warning on kprobes recordmcount: support >64k sections
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm updates from Dan Williams: "A feature (papr_scm health retrieval) and a fix (sysfs attribute visibility) for v5.8. Vaibhav explains in the merge commit below why missing v5.8 would be painful and I agreed to try a -rc2 pull because only cosmetics kept this out of -rc1 and his initial versions were posted in more than enough time for v5.8 consideration: 'These patches are tied to specific features that were committed to customers in upcoming distros releases (RHEL and SLES) whose time-lines are tied to 5.8 kernel release. Being able to track the health of an nvdimm is critical for our customers that are running workloads leveraging papr-scm nvdimms. Missing the 5.8 kernel would mean missing the distro timelines and shifting forward the availability of this feature in distro kernels by at least 6 months' Summary: - Fix the visibility of the region 'align' attribute. The new unit tests for region alignment handling caught a corner case where the alignment cannot be specified if the region is converted from static to dynamic provisioning at runtime. - Add support for device health retrieval for the persistent memory supported by the papr_scm driver. This includes both the standard sysfs "health flags" that the nfit persistent memory driver publishes and a mechanism for the ndctl tool to retrieve a health-command payload" * tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/region: always show the 'align' attribute powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods powerpc/papr_scm: Improve error logging and handling papr_scm_ndctl() powerpc/papr_scm: Fetch nvdimm health information from PHYP seq_buf: Export seq_buf_printf powerpc: Document details on H_SCM_HEALTH hcall
-
由 Sivaprakash Murugesan 提交于
The patch adds missing qpic data pins to qpic pingroup. These pins are necessary for the qpic nand to work. Fixes: ef1ea54e ("pinctrl: qcom: Add ipq6018 pinctrl driver") Signed-off-by: NSivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1592541089-17700-1-git-send-email-sivaprak@codeaurora.orgSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Haibo Chen 提交于
Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'" This reverts commit ba403242. After commit 26d8cde5 ("pinctrl: freescale: imx: add shared input select reg support"). i.MX7D has two iomux controllers iomuxc and iomuxc-lpsr which share select_input register for daisy chain settings. If use 'devm_of_iomap()', when probe the iomuxc-lpsr, will call devm_request_mem_region() for the region <0x30330000-0x3033ffff> for the first time. Then, next time when probe the iomuxc, API devm_platform_ioremap_resource() will also use the API devm_request_mem_region() for the share region <0x30330000-0x3033ffff> again, then cause issue, log like below: [ 0.179561] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver [ 0.191742] imx7d-pinctrl 30330000.pinctrl: can't request region for resource [mem 0x30330000-0x3033ffff] [ 0.191842] imx7d-pinctrl: probe of 30330000.pinctrl failed with error -16 Fixes: ba403242 ("pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'") Signed-off-by: NHaibo Chen <haibo.chen@nxp.com> Reviewed-by: NDong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1591673223-1680-1-git-send-email-haibo.chen@nxp.comSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Vasily Gorbik: - a few ptrace fixes mostly for strace and seccomp_bpf kernel tests findings - cleanup unused pm callbacks in virtio ccw - replace kmalloc + memset with kzalloc in crypto - use $(LD) for vDSO linkage to make clang happy - fix vDSO clock_getres() to preserve the same behaviour as posix_get_hrtimer_res() - fix workqueue cpumask warning when NUMA=n and nr_node_ids=2 - reduce SLSB writes during input processing, improve warnings and cleanup qdio_data usage in qdio - a few fixes to use scnprintf() instead of snprintf() * tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix syscall_get_error for compat processes s390/qdio: warn about unexpected SLSB states s390/qdio: clean up usage of qdio_data s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES s390/vdso: fix vDSO clock_getres() s390/vdso: Use $(LD) instead of $(CC) to link vDSO s390/protvirt: use scnprintf() instead of snprintf() s390: use scnprintf() in sys_##_prefix##_##_name##_show s390/crypto: use scnprintf() instead of snprintf() s390/zcrypt: use kzalloc s390/virtio: remove unused pm callbacks s390/qdio: reduce SLSB writes during Input Queue processing selftests/seccomp: s390 shares the syscall and return value register s390/ptrace: fix setting syscall number s390/ptrace: pass invalid syscall numbers to tracing s390/ptrace: return -ENOSYS when invalid syscall is supplied s390/seccomp: pass syscall arguments via seccomp_data s390/qdio: fine-tune SLSB update
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux由 Linus Torvalds 提交于
Pull RISC-V fixes from Palmer Dabbelt: - a workaround for a compiler surprise related to the "r" inline assembly that allows LLVM to boot. - a fix to avoid WX-only mappings, which the ISA does not allow. While this probably manifests in many ways, the bug was found in stress-ng. - a missing lock in set_direct_map_*(), which due to a recent lockdep change started asserting. * tag 'riscv-for-linus-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Acquire mmap lock before invoking walk_page_range RISC-V: Don't allow write+exec only page mapping request in mmap riscv/atomic: Fix sign extension for RV64I
-
由 Linus Torvalds 提交于
Merge tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest cleanups from Shuah Khan: - ftrace "requires:" list for simplifying and unifying requirement checks for each test case, adding "requires:" line instead of checking required ftrace interfaces in each test case. - a minor spelling correction patch * tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: Support ":README" suffix for requires selftests/ftrace: Support ":tracer" suffix for requires selftests/ftrace: Convert check_filter_file() with requires list selftests/ftrace: Convert required interface checks into requires list selftests/ftrace: Add "requires:" list support selftests/ftrace: Return unsupported for the unconfigured features selftests/ftrace: Allow ":" in description tools: testing: ftrace: trigger: fix spelling mistake
-
由 David Howells 提交于
The fileserver probe timer, net->fs_probe_timer, isn't cancelled when the kafs module is being removed and so the count it holds on net->servers_outstanding doesn't get dropped.. This causes rmmod to wait forever. The hung process shows a stack like: afs_purge_servers+0x1b5/0x23c [kafs] afs_net_exit+0x44/0x6e [kafs] ops_exit_list+0x72/0x93 unregister_pernet_operations+0x14c/0x1ba unregister_pernet_subsys+0x1d/0x2a afs_exit+0x29/0x6f [kafs] __do_sys_delete_module.isra.0+0x1a2/0x24b do_syscall_64+0x51/0x95 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by: (1) Attempting to cancel the probe timer and, if successful, drop the count that the timer was holding. (2) Make the timer function just drop the count and not schedule the prober if the afs portion of net namespace is being destroyed. Also, whilst we're at it, make the following changes: (3) Initialise net->servers_outstanding to 1 and decrement it before waiting on it so that it doesn't generate wake up events by being decremented to 0 until we're cleaning up. (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in afs_purge_servers() to use the helper function for that. Fixes: f6cbb368 ("afs: Actively poll fileservers to maintain NAT or firewall openings") Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Fix afs_do_lookup()'s fallback case for when FS.InlineBulkStatus isn't supported by the server. In the fallback, it calls FS.FetchStatus for the specific vnode it's meant to be looking up. Commit b6489a49 broke this by renaming one of the two identically-named afs_fetch_status_operation descriptors to something else so that one of them could be made non-static. The site that used the renamed one, however, wasn't renamed and didn't produce any warning because the other was declared in a header. Fix this by making afs_do_lookup() use the renamed variant. Note that there are two variants of the success method because one is called from ->lookup() where we may or may not have an inode, but can't call iget until after we've talked to the server - whereas the other is called from within iget where we have an inode, but it may or may not be initialised. The latter variant expects there to be an inode, but because it's being called from there former case, there might not be - resulting in an oops like the following: BUG: kernel NULL pointer dereference, address: 00000000000000b0 ... RIP: 0010:afs_fetch_status_success+0x27/0x7e ... Call Trace: afs_wait_for_operation+0xda/0x234 afs_do_lookup+0x2fe/0x3c1 afs_lookup+0x3c5/0x4bd __lookup_slow+0xcd/0x10f walk_component+0xa2/0x10c path_lookupat.isra.0+0x80/0x110 filename_lookup+0x81/0x104 vfs_statx+0x76/0x109 __do_sys_newlstat+0x39/0x6b do_syscall_64+0x4c/0x78 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: b6489a49 ("afs: Fix silly rename") Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 6月, 2020 3 次提交
-
-
由 Christophe Leroy 提交于
READ_ONCE() now enforces atomic read, which leads to: CC mm/gup.o In file included from ./include/linux/kernel.h:11:0, from mm/gup.c:2: In function 'gup_hugepte.constprop', inlined from 'gup_huge_pd.isra.79' at mm/gup.c:2465:8: ./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_222' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE(). _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert' prefix ## suffix(); \ ^ ./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert' compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \ ^ ./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type' compiletime_assert_rwonce_type(x); \ ^ mm/gup.c:2428:8: note: in expansion of macro 'READ_ONCE' pte = READ_ONCE(*ptep); ^ In function 'gup_get_pte', inlined from 'gup_pte_range' at mm/gup.c:2228:9, inlined from 'gup_pmd_range' at mm/gup.c:2613:15, inlined from 'gup_pud_range' at mm/gup.c:2641:15, inlined from 'gup_p4d_range' at mm/gup.c:2666:15, inlined from 'gup_pgd_range' at mm/gup.c:2694:15, inlined from 'internal_get_user_pages_fast' at mm/gup.c:2795:3: ./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_219' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE(). _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert' prefix ## suffix(); \ ^ ./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ^ ./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert' compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \ ^ ./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type' compiletime_assert_rwonce_type(x); \ ^ mm/gup.c:2199:9: note: in expansion of macro 'READ_ONCE' return READ_ONCE(*ptep); ^ make[2]: *** [mm/gup.o] Error 1 Define ptep_get() on 8xx when using 16k pages. Fixes: 9e343b46 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: NChristophe Leroy <christophe.leroy@csgroup.eu> Acked-by: NWill Deacon <will@kernel.org> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/341688399c1b102756046d19ea6ce39db1ae4742.1592225558.git.christophe.leroy@csgroup.eu
-
由 Christophe Leroy 提交于
Since commit 9e343b46 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") it is not possible anymore to use READ_ONCE() to access complex page table entries like the one defined for powerpc 8xx with 16k size pages. Define a ptep_get() helper that architectures can override instead of performing a READ_ONCE() on the page table entry pointer. Fixes: 9e343b46 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: NChristophe Leroy <christophe.leroy@csgroup.eu> Acked-by: NWill Deacon <will@kernel.org> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/087fa12b6e920e32315136b998aa834f99242695.1592225558.git.christophe.leroy@csgroup.eu
-
由 Christophe Leroy 提交于
gup_hugepte() reads hugepage table entries, it can't read them directly, huge_ptep_get() must be used. Fixes: 9e343b46 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses") Signed-off-by: NChristophe Leroy <christophe.leroy@csgroup.eu> Acked-by: NWill Deacon <will@kernel.org> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ffc3714334c3bfaca6f13788ad039e8759ae413f.1592225558.git.christophe.leroy@csgroup.eu
-