- 29 12月, 2017 5 次提交
-
-
由 David S. Miller 提交于
Tom Herbert says: ==================== strparser: Fix lockdep issue When sock_owned_by_user returns true in strparser. Fix is to add and call sock_owned_by_user_nocheck since the check for owned by user is not an error condition in this case. ==================== Fixes: 43a0c675 ("strparser: Stream parser for messages") Reported-by: Nsyzbot <syzkaller@googlegroups.com> Reported-and-tested-by: <syzbot+c91c53af67f9ebe599a337d2e70950366153b295@syzkaller.appspotmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
strparser wants to check socket ownership without producing any warnings. As indicated by the comment in the code, it is permissible for owned_by_user to return true. Fixes: 43a0c675 ("strparser: Stream parser for messages") Reported-by: Nsyzbot <syzkaller@googlegroups.com> Reported-and-tested-by: <syzbot+c91c53af67f9ebe599a337d2e70950366153b295@syzkaller.appspotmail.com> Signed-off-by: NTom Herbert <tom@quantonium.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
This allows checking socket lock ownership with producing lockdep warnings. Signed-off-by: NTom Herbert <tom@quantonium.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
skb_copy_ubufs must unclone before it is safe to modify its skb_shared_info with skb_zcopy_clear. Commit b90ddd56 ("skbuff: skb_copy_ubufs must release uarg even without user frags") ensures that all skbs release their zerocopy state, even those without frags. But I forgot an edge case where such an skb arrives that is cloned. The stack does not build such packets. Vhost/tun skbs have their frags orphaned before cloning. TCP skbs only attach zerocopy state when a frag is added. But if TCP packets can be trimmed or linearized, this might occur. Tracing the code I found no instance so far (e.g., skb_linearize ends up calling skb_zcopy_clear if !skb->data_len). Still, it is non-obvious that no path exists. And it is fragile to rely on this. Fixes: b90ddd56 ("skbuff: skb_copy_ubufs must release uarg even without user frags") Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Parthasarathy Bhuvaragan 提交于
In commit 42b531de ("tipc: Fix missing connection request handling"), we replaced unconditional wakeup() with condtional wakeup for clients with flags POLLIN | POLLRDNORM | POLLRDBAND. This breaks the applications which do a connect followed by poll with POLLOUT flag. These applications are not woken when the connection is ESTABLISHED and hence sleep forever. In this commit, we fix it by including the POLLOUT event for sockets in TIPC_CONNECTING state. Fixes: 42b531de ("tipc: Fix missing connection request handling") Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 12月, 2017 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf由 David S. Miller 提交于
Daniel Borkmann says: ==================== pull-request: bpf 2017-12-28 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Two small fixes for bpftool. Fix otherwise broken output if any of the system calls failed when listing maps in json format and instead of bailing out, skip maps or progs that disappeared between fetching next id and getting an fd for that id, both from Jakub. 2) Small fix in BPF selftests to respect LLC passed from command line when testing for -mcpu=probe presence, from Quentin. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tonghao Zhang 提交于
The patch(180d8cd9) replaces all uses of struct sock fields' memory_pressure, memory_allocated, sockets_allocated, and sysctl_mem to accessor macros. But the sockets_allocated field of sctp sock is not replaced at all. Then replace it now for unifying the code. Fixes: 180d8cd9 ("foundations of per-cgroup memory pressure controlling.") Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: NTonghao Zhang <zhangtonghao@didichuxing.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guilherme G. Piccoli 提交于
While in recovery process of PCI error (called EEH on PowerPC arch), another PCI transaction could be corrupted causing a situation of nested PCI errors. Also, this scenario could be reproduced with error injection mechanisms (for debug purposes). We observe that in case of nested PCI errors, bnx2x might attempt to initialize its shmem and cause a kernel crash due to bad addresses read from MCP. Multiple different stack traces were observed depending on the point the second PCI error happens. This patch avoids the crashes by: * failing PCI recovery in case of nested errors (since multiple PCI errors in a row are not expected to lead to a functional adapter anyway), and by, * preventing access to adapter FW when MCP is failed (we mark it as failed when shmem cannot get initialized properly). Reported-by: NAbdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: NGuilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: NShahed Shaikh <Shahed.Shaikh@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Siva Reddy Kallam says: ==================== tg3: update on copyright and couple of fixes First patch: Update copyright Second patch: Add workaround to restrict 5762 MRRS Third patch: Add PHY reset in change MTU path for 5720 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Siva Reddy Kallam 提交于
A customer noticed RX path hang when MTU is changed on the fly while running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720 belongs to same ASIC family, we observed same issue and same fix could solve this problem for 5720. Signed-off-by: NSiva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Siva Reddy Kallam 提交于
One of AMD based server with 5762 hangs with jumbo frame traffic. This AMD platform has southbridge limitation which is restricting MRRS to 4000. As a work around, driver to restricts the MRRS to 2048 for this particular 5762 NX1 card. Signed-off-by: NSiva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Siva Reddy Kallam 提交于
Signed-off-by: NSiva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 12月, 2017 12 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec由 David S. Miller 提交于
Steffen Klassert says: ==================== pull request (net): ipsec 2017-12-22 1) Check for valid id proto in validate_tmpl(), otherwise we may trigger a warning in xfrm_state_fini(). From Cong Wang. 2) Fix a typo on XFRMA_OUTPUT_MARK policy attribute. From Michal Kubecek. 3) Verify the state is valid when encap_type < 0, otherwise we may crash on IPsec GRO . From Aviv Heller. 4) Fix stack-out-of-bounds read on socket policy lookup. We access the flowi of the wrong address family in the IPv4 mapped IPv6 case, fix this by catching address family missmatches before we do the lookup. 5) fix xfrm_do_migrate() with AEAD to copy the geniv field too. Otherwise the state is not fully initialized and migration fails. From Antony Antony. 6) Fix stack-out-of-bounds with misconfigured transport mode policies. Our policy template validation is not strict enough. It is possible to configure policies with transport mode template where the address family of the template does not match the selectors address family. Fix this by refusing such a configuration, address family can not change on transport mode. 7) Fix a policy reference leak when reusing pcpu xdst entry. From Florian Westphal. 8) Reinject transport-mode packets through tasklet, otherwise it is possible to reate a recursion loop. From Herbert Xu. Please pull or let me know if there are problems. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fugang Duan 提交于
The enet IP only support 32 bit, it will use swiotlb buffer to do dma mapping when xmit buffer DMA memory address is bigger than 4G in i.MX platform. After stress suspend/resume test, it will print out: log: [12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes) [12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet [12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed The issue is that the ready xmit buffers that are dma mapped but DMA still don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped. So it should check the dma mapping buffer and unmap them. Signed-off-by: NFugang Duan <fugang.duan@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tommi Rantala 提交于
Calling tipc_mon_delete() before the monitor has been created will oops. This can happen in tipc_enable_bearer() error path if tipc_disc_create() fails. [ 48.589074] BUG: unable to handle kernel paging request at 0000000000001008 [ 48.590266] IP: tipc_mon_delete+0xea/0x270 [tipc] [ 48.591223] PGD 1e60c5067 P4D 1e60c5067 PUD 1eb0cf067 PMD 0 [ 48.592230] Oops: 0000 [#1] SMP KASAN [ 48.595610] CPU: 5 PID: 1199 Comm: tipc Tainted: G B 4.15.0-rc4-pc64-dirty #5 [ 48.597176] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 48.598489] RIP: 0010:tipc_mon_delete+0xea/0x270 [tipc] [ 48.599347] RSP: 0018:ffff8801d827f668 EFLAGS: 00010282 [ 48.600705] RAX: ffff8801ee813f00 RBX: 0000000000000204 RCX: 0000000000000000 [ 48.602183] RDX: 1ffffffff1de6a75 RSI: 0000000000000297 RDI: 0000000000000297 [ 48.604373] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff1dd1533 [ 48.605607] R10: ffffffff8eafbb05 R11: fffffbfff1dd1534 R12: 0000000000000050 [ 48.607082] R13: dead000000000200 R14: ffffffff8e73f310 R15: 0000000000001020 [ 48.608228] FS: 00007fc686484800(0000) GS:ffff8801f5540000(0000) knlGS:0000000000000000 [ 48.610189] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 48.611459] CR2: 0000000000001008 CR3: 00000001dda70002 CR4: 00000000003606e0 [ 48.612759] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 48.613831] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 48.615038] Call Trace: [ 48.615635] tipc_enable_bearer+0x415/0x5e0 [tipc] [ 48.620623] tipc_nl_bearer_enable+0x1ab/0x200 [tipc] [ 48.625118] genl_family_rcv_msg+0x36b/0x570 [ 48.631233] genl_rcv_msg+0x5a/0xa0 [ 48.631867] netlink_rcv_skb+0x1cc/0x220 [ 48.636373] genl_rcv+0x24/0x40 [ 48.637306] netlink_unicast+0x29c/0x350 [ 48.639664] netlink_sendmsg+0x439/0x590 [ 48.642014] SYSC_sendto+0x199/0x250 [ 48.649912] do_syscall_64+0xfd/0x2c0 [ 48.650651] entry_SYSCALL64_slow_path+0x25/0x25 [ 48.651843] RIP: 0033:0x7fc6859848e3 [ 48.652539] RSP: 002b:00007ffd25dff938 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 48.654003] RAX: ffffffffffffffda RBX: 00007ffd25dff990 RCX: 00007fc6859848e3 [ 48.655303] RDX: 0000000000000054 RSI: 00007ffd25dff990 RDI: 0000000000000003 [ 48.656512] RBP: 00007ffd25dff980 R08: 00007fc685c35fc0 R09: 000000000000000c [ 48.657697] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000d13010 [ 48.658840] R13: 00007ffd25e009c0 R14: 0000000000000000 R15: 0000000000000000 [ 48.662972] RIP: tipc_mon_delete+0xea/0x270 [tipc] RSP: ffff8801d827f668 [ 48.664073] CR2: 0000000000001008 [ 48.664576] ---[ end trace e811818d54d5ce88 ]--- Acked-by: NYing Xue <ying.xue@windriver.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NTommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tommi Rantala 提交于
Fix memory leak in tipc_enable_bearer() if enable_media() fails, and cleanup with bearer_disable() if tipc_mon_create() fails. Acked-by: NYing Xue <ying.xue@windriver.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NTommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Avinash Repaka 提交于
RDS currently doesn't check if the length of the control message is large enough to hold the required data, before dereferencing the control message data. This results in following crash: BUG: KASAN: stack-out-of-bounds in rds_rdma_bytes net/rds/send.c:1013 [inline] BUG: KASAN: stack-out-of-bounds in rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066 Read of size 8 at addr ffff8801c928fb70 by task syzkaller455006/3157 CPU: 0 PID: 3157 Comm: syzkaller455006 Not tainted 4.15.0-rc3+ #161 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x25b/0x340 mm/kasan/report.c:409 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430 rds_rdma_bytes net/rds/send.c:1013 [inline] rds_sendmsg+0x1f02/0x1f90 net/rds/send.c:1066 sock_sendmsg_nosec net/socket.c:628 [inline] sock_sendmsg+0xca/0x110 net/socket.c:638 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2018 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2108 SYSC_sendmmsg net/socket.c:2139 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2134 entry_SYSCALL_64_fastpath+0x1f/0x96 RIP: 0033:0x43fe49 RSP: 002b:00007fffbe244ad8 EFLAGS: 00000217 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fe49 RDX: 0000000000000001 RSI: 000000002020c000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004017b0 R13: 0000000000401840 R14: 0000000000000000 R15: 0000000000000000 To fix this, we verify that the cmsg_len is large enough to hold the data to be read, before proceeding further. Reported-by: Nsyzbot <syzkaller-bugs@googlegroups.com> Signed-off-by: NAvinash Repaka <avinash.repaka@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mat Martineau 提交于
Using a preprocessor directive to check for CONFIG_IPV6 in the middle of a DECLARE_EVENT_CLASS macro's arg list causes sparse to report a series of errors: ./include/trace/events/tcp.h:68:1: error: directive in argument list ./include/trace/events/tcp.h:75:1: error: directive in argument list ./include/trace/events/tcp.h:144:1: error: directive in argument list ./include/trace/events/tcp.h:151:1: error: directive in argument list ./include/trace/events/tcp.h:216:1: error: directive in argument list ./include/trace/events/tcp.h:223:1: error: directive in argument list ./include/trace/events/tcp.h:274:1: error: directive in argument list ./include/trace/events/tcp.h:281:1: error: directive in argument list Once sparse finds an error, it stops printing warnings for the file it is checking. This masks any sparse warnings that would normally be reported for the core TCP code. Instead, handle the preprocessor conditionals in a couple of auxiliary macros. This also has the benefit of reducing duplicate code. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Maloy 提交于
When a group member receives a member WITHDRAW event, this might have two reasons: either the peer member is leaving the group, or the link to the member's node has been lost. In the latter case we need to issue a DOWN event to the user right away, and let function tipc_group_filter_msg() perform delete of the member item. However, in this case we miss to change the state of the member item to MBR_LEAVING, so the member item is not deleted, and we have a memory leak. We now separate better between the four sub-cases of a WITHRAW event and make sure that each case is handled correctly. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
We need to check block for being null in both tcf_block_put and tcf_block_put_ext. Fixes: 343723dd ("net: sched: fix clsact init error path") Reported-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Maloy 提交于
In commit 2f487712 ("tipc: guarantee that group broadcast doesn't bypass group unicast") we introduced a mechanism that requires the first (replicated) broadcast sent after a unicast to be acknowledged by all receivers before permitting sending of the next (true) broadcast. The counter for keeping track of the number of acknowledges to expect is based on the tipc_group::member_cnt variable. But this misses that some of the known members may not be ready for reception, and will never acknowledge the message, either because they haven't fully joined the group or because they are leaving the group. Such members are identified by not fulfilling the condition tested for in the function tipc_group_is_enabled(). We now set the counter for the actual number of acks to receive at the moment the message is sent, by just counting the number of recipients satisfying the tipc_group_is_enabled() test. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
The rcu_barrier_bh() in mini_qdisc_pair_swap() is to wait for flying RCU callback installed by a previous mini_qdisc_pair_swap(), however we miss it on the tp_head==NULL path, which leads to that the RCU callback still uses miniq_old->rcu after it is freed together with qdisc in qdisc_graft(). So just add it on that path too. Fixes: 46209401 ("net: core: introduce mini_Qdisc and eliminate usage of tp->q for clsact fastpath ") Reported-by: NJakub Kicinski <jakub.kicinski@netronome.com> Tested-by: NJakub Kicinski <jakub.kicinski@netronome.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Grygorii Strashko 提交于
Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719b ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kodanev 提交于
When ip6gre is created using ioctl, its features, such as scatter-gather, GSO and tx-checksumming will be turned off: # ip -f inet6 tunnel add gre6 mode ip6gre remote fd00::1 # ethtool -k gre6 (truncated output) tx-checksumming: off scatter-gather: off tcp-segmentation-offload: off generic-segmentation-offload: off [requested on] But when netlink is used, they will be enabled: # ip link add gre6 type ip6gre remote fd00::1 # ethtool -k gre6 (truncated output) tx-checksumming: on scatter-gather: on tcp-segmentation-offload: on generic-segmentation-offload: on This results in a loss of performance when gre6 is created via ioctl. The issue was found with LTP/gre tests. Fix it by moving the setup of device features to a separate function and invoke it with ndo_init callback because both netlink and ioctl will eventually call it via register_netdevice(): register_netdevice() - ndo_init() callback -> ip6gre_tunnel_init() or ip6gre_tap_init() - ip6gre_tunnel_init_common() - ip6gre_tnl_init_features() The moved code also contains two minor style fixes: * removed needless tab from GRE6_FEATURES on NETIF_F_HIGHDMA line. * fixed the issue reported by checkpatch: "Unnecessary parentheses around 'nt->encap.type == TUNNEL_ENCAP_NONE'" Fixes: ac4eb009 ("ip6gre: Add support for basic offloads offloads excluding GSO") Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 12月, 2017 2 次提交
-
-
由 Russell King 提交于
Ensure that we mark AN as enabled at boot time, rather than leaving it disabled. This is noticable if your SFP module is fiber, and it supports faster speeds than 1G with 2.5G support in place. Fixes: 9525ae83 ("phylink: add phylink infrastructure") Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
When setting the ethtool settings, ensure that the validated PHY interface mode is propagated to the current link settings, so that 2500BaseX can be selected. Fixes: 9525ae83 ("phylink: add phylink infrastructure") Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 12月, 2017 3 次提交
-
-
由 Daniel Borkmann 提交于
Jakub Kicinski says: ==================== Two small fixes here to listing maps and programs. The loop for showing maps is written slightly differently to programs which was missed in JSON output support, and output would be broken if any of the system calls failed. Second fix is in very unlikely case that program or map disappears after we get its ID we should just skip over that object instead of failing. ==================== Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Jakub Kicinski 提交于
On program/map show we may get an ID of an object from GETNEXT, but the object may disappear before we call GET_FD_BY_ID. If that happens, ignore the object and continue. Fixes: 71bb428f ("tools: bpf: add bpftool") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NQuentin Monnet <quentin.monnet@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Jakub Kicinski 提交于
We can't return from the middle of do_show(), because json_array will not be closed. Break out of the loop. Note that the error handling after the loop depends on errno, so no need to set err. Fixes: 831a0aaf ("tools: bpftool: add JSON output for `bpftool map *` commands") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NQuentin Monnet <quentin.monnet@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 22 12月, 2017 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller" "What's a holiday weekend without some networking bug fixes? [1] 1) Fix some eBPF JIT bugs wrt. SKB pointers across helper function calls, from Daniel Borkmann. 2) Fix regression from errata limiting change to marvell PHY driver, from Zhao Qiang. 3) Fix u16 overflow in SCTP, from Xin Long. 4) Fix potential memory leak during bridge newlink, from Nikolay Aleksandrov. 5) Fix BPF selftest build on s390, from Hendrik Brueckner. 6) Don't append to cfg80211 automatically generated certs file, always write new ones from scratch. From Thierry Reding. 7) Fix sleep in atomic in mac80211 hwsim, from Jia-Ju Bai. 8) Fix hang on tg3 MTU change with certain chips, from Brian King. 9) Add stall detection to arc emac driver and reset chip when this happens, from Alexander Kochetkov. 10) Fix MTU limitng in GRE tunnel drivers, from Xin Long. 11) Fix stmmac timestamping bug due to mis-shifting of field. From Fredrik Hallenberg. 12) Fix metrics match when deleting an ipv4 route. The kernel sets some internal metrics bits which the user isn't going to set when it makes the delete request. From Phil Sutter. 13) mvneta driver loop over RX queues limits on "txq_number" :-) Fix from Yelena Krivosheev. 14) Fix double free and memory corruption in get_net_ns_by_id, from Eric W. Biederman. 15) Flush ipv4 FIB tables in the reverse order. Some tables can share their actual backing data, in particular this happens for the MAIN and LOCAL tables. We have to kill the LOCAL table first, because it uses MAIN's backing memory. Fix from Ido Schimmel. 16) Several eBPF verifier value tracking fixes, from Edward Cree, Jann Horn, and Alexei Starovoitov. 17) Make changes to ipv6 autoflowlabel sysctl really propagate to sockets, unless the socket has set the per-socket value explicitly. From Shaohua Li. 18) Fix leaks and double callback invocations of zerocopy SKBs, from Willem de Bruijn" [1] Is this a trick question? "Relaxing"? "Quiet"? "Fine"? - Linus. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) skbuff: skb_copy_ubufs must release uarg even without user frags skbuff: orphan frags before zerocopy clone net: reevalulate autoflowlabel setting after sysctl setting openvswitch: Fix pop_vlan action for double tagged frames ipv6: Honor specified parameters in fibmatch lookup bpf: do not allow root to mangle valid pointers selftests/bpf: add tests for recent bugfixes bpf: fix integer overflows bpf: don't prune branches when a scalar is replaced with a pointer bpf: force strict alignment checks for stack pointers bpf: fix missing error return in check_stack_boundary() bpf: fix 32-bit ALU op verification bpf: fix incorrect tracking of register size truncation bpf: fix incorrect sign extension in check_alu_op() bpf/verifier: fix bounds calculation on BPF_RSH ipv4: Fix use-after-free when flushing FIB tables s390/qeth: fix error handling in checksum cmd callback tipc: remove joining group member from congested list selftests: net: Adding config fragment CONFIG_NUMA=y nfp: bpf: keep track of the offloaded program ...
-
由 Quentin Monnet 提交于
Makefile has a LLC variable that is initialised to "llc", but can theoretically be overridden from the command line ("make LLC=llc-6.0"). However, this fails because for LLVM probe check, "llc" is called directly. Use the $(LLC) variable instead to fix this. Fixes: 22c88526 ("bpf: improve selftests and add tests for meta pointer") Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com> Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 David S. Miller 提交于
Saeed Mahameed says: =================== Mellanox, mlx5 fixes 2017-12-19 The follwoing series includes some fixes for mlx5 core and etherent driver. Please pull and let me know if there is any problem. This series doesn't introduce any conflict with the ongoing mlx5 for-next submission. For -stable: kernels >= v4.7.y ("net/mlx5e: Fix possible deadlock of VXLAN lock") ("net/mlx5e: Add refcount to VXLAN structure") ("net/mlx5e: Prevent possible races in VXLAN control flow") ("net/mlx5e: Fix features check of IPv6 traffic") kernels >= v4.9.y ("net/mlx5: Fix error flow in CREATE_QP command") ("net/mlx5: Fix rate limit packet pacing naming and struct") kernels >= v4.13.y ("net/mlx5: FPGA, return -EINVAL if size is zero") kernels >= v4.14.y ("Revert "mlx5: move affinity hints assignments to generic code") All above patches apply and compile with no issues on corresponding -stable. =================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
skb_copy_ubufs creates a private copy of frags[] to release its hold on user frags, then calls uarg->callback to notify the owner. Call uarg->callback even when no frags exist. This edge case can happen when zerocopy_sg_from_iter finds enough room in skb_headlen to copy all the data. Fixes: 3ece7826 ("sock: skb_copy_ubufs support for compound pages") Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Call skb_zerocopy_clone after skb_orphan_frags, to avoid duplicate calls to skb_uarg(skb)->callback for the same data. skb_zerocopy_clone associates skb_shinfo(skb)->uarg from frag_skb with each segment. This is only safe for uargs that do refcounting, which is those that pass skb_orphan_frags without dropping their shared frags. For others, skb_orphan_frags drops the user frags and sets the uarg to NULL, after which sock_zerocopy_clone has no effect. Qemu hangs were reported due to duplicate vhost_net_zerocopy_callback calls for the same data causing the vhost_net_ubuf_ref_>refcount to drop below zero. Link: http://lkml.kernel.org/r/<CAF=yD-LWyCD4Y0aJ9O0e_CHLR+3JOeKicRRTEVCPxgw4XOcqGQ@mail.gmail.com> Fixes: 1f8b977a ("sock: enable MSG_ZEROCOPY") Reported-by: NAndreas Hartmann <andihartmann@01019freenet.de> Reported-by: NDavid Hill <dhill@redhat.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "It's been a few weeks, so here's a small collection of fixes that should go into the current series. This contains: - NVMe pull request from Christoph, with a few important fixes. - kyber hang fix from Omar. - A blk-throttl fix from Shaohua, fixing a case where we double charge a bio. - Two call_single_data alignment fixes from me, fixing up some unfortunate changes that went into 4.14 without being properly reviewed on the block side (since nobody was CC'ed on the patch...). - A bounce buffer fix in two parts, one from me and one from Ming. - Revert bdi debug error handling patch. It's causing boot issues for some folks, and a week down the line, we're still no closer to a fix. Revert this patch for now until it's figured out, then we can retry for 4.16" * 'for-linus' of git://git.kernel.dk/linux-block: Revert "bdi: add error handle for bdi_debug_register" null_blk: unalign call_single_data block: unalign call_single_data in struct request block-throttle: avoid double charge block: fix blk_rq_append_bio block: don't let passthrough IO go into .make_request_fn() nvme: setup streams after initializing namespace head nvme: check hw sectors before setting chunk sectors nvme: call blk_integrity_unregister after queue is cleaned up nvme-fc: remove double put reference if admin connect fails nvme: set discard_alignment to zero kyber: fix another domain token wait queue hang
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: "ARM fixes: - A bug in handling of SPE state for non-vhe systems - A fix for a crash on system shutdown - Three timer fixes, introduced by the timer optimizations for v4.15 x86 fixes: - fix for a WARN that was introduced in 4.15 - fix for SMM when guest uses PCID - fixes for several bugs found by syzkaller ... and a dozen papercut fixes for the kvm_stat tool" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits) tools/kvm_stat: sort '-f help' output kvm: x86: fix RSM when PCID is non-zero KVM: Fix stack-out-of-bounds read in write_mmio KVM: arm/arm64: Fix timer enable flow KVM: arm/arm64: Properly handle arch-timer IRQs after vtimer_save_state KVM: arm/arm64: timer: Don't set irq as forwarded if no usable GIC KVM: arm/arm64: Fix HYP unmapping going off limits arm64: kvm: Prevent restoring stale PMSCR_EL1 for vcpu KVM/x86: Check input paging mode when cs.l is set tools/kvm_stat: add line for totals tools/kvm_stat: stop ignoring unhandled arguments tools/kvm_stat: suppress usage information on command line errors tools/kvm_stat: handle invalid regular expressions tools/kvm_stat: add hint on '-f help' to man page tools/kvm_stat: fix child trace events accounting tools/kvm_stat: fix extra handling of 'help' with fields filter tools/kvm_stat: fix missing field update after filter change tools/kvm_stat: fix drilldown in events-by-guests mode tools/kvm_stat: fix command line option '-g' kvm: x86: fix WARN due to uninitialized guest FPU state ...
-
由 Shaohua Li 提交于
sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2. If sockopt doesn't set autoflowlabel, outcome packets from the hosts are supposed to not include flowlabel. This is true for normal packet, but not for reset packet. The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't changed, so the sock will keep the old behavior in terms of auto flowlabel. Reset packet is suffering from this problem, because reset packet is sent from a special control socket, which is created at boot time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control socket will always have its ipv6_pinfo.autoflowlabel set, even after user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always have flowlabel. Normal sock created before sysctl setting suffers from the same issue. We can't even turn off autoflowlabel unless we kill all socks in the hosts. To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the autoflowlabel setting from user, otherwise we always call ip6_default_np_autolabel() which has the new settings of sysctl. Note, this changes behavior a little bit. Before commit 42240901 (ipv6: Implement different admin modes for automatic flow labels), the autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes, existing connection will change autoflowlabel behavior. After that commit, autoflowlabel behavior is sticky in the whole life of the sock. With this patch, the behavior isn't sticky again. Cc: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Tom Herbert <tom@quantonium.net> Signed-off-by: NShaohua Li <shli@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Garver 提交于
skb_vlan_pop() expects skb->protocol to be a valid TPID for double tagged frames. So set skb->protocol to the TPID and let skb_vlan_pop() shift the true ethertype into position for us. Fixes: 5108bbad ("openvswitch: add processing of L3 packets") Signed-off-by: NEric Garver <e@erig.me> Reviewed-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jens Axboe 提交于
This reverts commit a0747a85. It breaks some booting for some users, and more than a week into this, there's still no good fix. Revert this commit for now until a solution has been found. Reported-by: NLaura Abbott <labbott@redhat.com> Reported-by: NBruno Wolff III <bruno@wolff.to> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Ido Schimmel 提交于
Currently, parameters such as oif and source address are not taken into account during fibmatch lookup. Example (IPv4 for reference) before patch: $ ip -4 route show 192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1 198.51.100.0/24 dev dummy1 proto kernel scope link src 198.51.100.1 $ ip -6 route show 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium 2001:db8:2::/64 dev dummy1 proto kernel metric 256 pref medium fe80::/64 dev dummy0 proto kernel metric 256 pref medium fe80::/64 dev dummy1 proto kernel metric 256 pref medium $ ip -4 route get fibmatch 192.0.2.2 oif dummy0 192.0.2.0/24 dev dummy0 proto kernel scope link src 192.0.2.1 $ ip -4 route get fibmatch 192.0.2.2 oif dummy1 RTNETLINK answers: No route to host $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium After: $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy0 2001:db8:1::/64 dev dummy0 proto kernel metric 256 pref medium $ ip -6 route get fibmatch 2001:db8:1::2 oif dummy1 RTNETLINK answers: Network is unreachable The problem stems from the fact that the necessary route lookup flags are not set based on these parameters. Instead of duplicating the same logic for fibmatch, we can simply resolve the original route from its copy and dump it instead. Fixes: 18c3a61c ("net: ipv6: RTM_GETROUTE: return matched fib result when requested") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-