- 20 12月, 2019 8 次提交
-
-
由 Russell King 提交于
marvell_read_status_page_an() always reads the PHY status register, but marvell_update_link() has already done this. Rather than wastefully reading the register twice in quick succession, read it once in marvell_read_status_page() and use the result for both. This makes marvell_update_link() rather pointless, so move it into marvell_read_status_page(). Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
Rather than using negative logic: if (there is no link) set link = 0 else set link = 1 use the more natural positive logic: if (there is link) set link = 1 else set link = 0 Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
Move the initialisation of the link partner state earlier, inside marvell_read_status_page(), so we don't have the same initialisation scattered amongst the other files. This is in a similar place to the genphy implementation, so would result in the same behaviour if a PHY read error occurs. This allows us to get rid of marvell_read_status_page_fixed(), which became a pointless wrapper around genphy_read_status_fixed(). Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
Rearrange the Marvell PHY driver to use genphy_read_lpa() rather than open-coding this functionality. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
There are two drivers and generic code which contain exactly the same code to read the status of a PHY operating without autonegotiation enabled. Rather than duplicate this code, provide a helper to read this information. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
Add a helper for restarting autonegotiation(), similar to the clause 45 variant. Use it in __genphy_config_aneg() Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
Several drivers code their own version of this, working from the LPA register, after setting the ethtool link partner advertisement bitmask. Use the generic function instead. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
Remove initialisers that set .aneg_done to genphy_aneg_done - this is the default for clause 22 PHYs, so the initialiser is redundant. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 12月, 2019 32 次提交
-
-
由 Jose Abreu 提交于
For ARCHs that don't support 64 bits division we need to use the helpers. Fixes: b60189e0 ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by: NJose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Petr Machata says: ==================== Add a new Qdisc, ETS The IEEE standard 802.1Qaz (and 802.1Q-2014) specifies four principal transmission selection algorithms: strict priority, credit-based shaper, ETS (bandwidth sharing), and vendor-specific. All these have their corresponding knobs in DCB. But DCB does not have interfaces to configure RED and ECN, unlike Qdiscs. In the Qdisc land, strict priority is implemented by PRIO. Credit-based transmission selection algorithm can then be modeled by having e.g. TBF or CBS Qdisc below some of the PRIO bands. ETS would then be modeled by placing a DRR Qdisc under the last PRIO band. The problem with this approach is that DRR on its own, as well as the combination of PRIO and DRR, are tricky to configure and tricky to offload to 802.1Qaz-compliant hardware. This is due to several reasons: - As any classful Qdisc, DRR supports adding classifiers to decide in which class to enqueue packets. Unlike PRIO, there's however no fallback in the form of priomap. A way to achieve classification based on packet priority is e.g. like this: # tc filter add dev swp1 root handle 1: \ basic match 'meta(priority eq 0)' flowid 1:10 Expressing the priomap in this manner however forces drivers to deep dive into the classifier block to parse the individual rules. A possible solution would be to extend the classes with a "defmap" a la split / defmap mechanism of CBQ, and introduce this as a last resort classification. However, unlike priomap, this doesn't have the guarantee of covering all priorities. Traffic whose priority is not covered is dropped by DRR as unclassified. But ASICs tend to implement dropping in the ACL block, not in scheduling pipelines. The need to treat these configurations correctly (if only to decide to not offload at all) complicates a driver. It's not clear how to retrofit priomap with all its benefits to DRR without changing it beyond recognition. - The interplay between PRIO and DRR is also causing problems. 802.1Qaz has all ETS TCs as a last resort. Switch ASICs that support ETS at all are likely to handle ETS traffic this way as well. However, the Linux model is more generic, allowing the DRR block in any band. Drivers would need to be careful to handle this case correctly, otherwise the offloaded model might not match the slow-path one. In a similar vein, PRIO and DRR need to agree on the list of priorities assigned to DRR. This is doubly problematic--the user needs to take care to keep the two in sync, and the driver needs to watch for any holes in DRR coverage and treat the traffic correctly, as discussed above. Note that at the time that DRR Qdisc is added, it has no classes, and thus any priorities assigned to that PRIO band are not covered. Thus this case is surprisingly rather common, and needs to be handled gracefully by the driver. - Similarly due to DRR flexibility, when a Qdisc (such as RED) is attached below it, it is not immediately clear which TC the class represents. This is unlike PRIO with its straightforward classid scheme. When DRR is combined with PRIO, the relationship between classes and TCs gets even more murky. This is a problem for users as well: the TC mapping is rather important for (devlink) shared buffer configuration and (ethtool) counters. So instead, this patch set introduces a new Qdisc, which is based on 802.1Qaz wording. It is PRIO-like in how it is configured, meaning one needs to specify how many bands there are, how many are strict and how many are ETS, quanta for the latter, and priomap. The new Qdisc operates like the PRIO / DRR combo would when configured as per the standard. The strict classes, if any, are tried for traffic first. When there's no traffic in any of the strict queues, the ETS ones (if any) are treated in the same way as in DRR. The chosen interface makes the overall system both reasonably easy to configure, and reasonably easy to offload. The extra code to support ETS in mlxsw (which already supports PRIO) is about 150 lines, of which perhaps 20 lines is bona fide new business logic. Credit-based shaping transmission selection algorithm can be configured by adding a CBS Qdisc under one of the strict bands (e.g. TBF can be used to a similar effect as well). As a non-work-conserving Qdisc, CBS can't be hooked under the ETS bands. This is detected and handled identically to DRR Qdisc at runtime. Note that offloading CBS is not subject of this patchset. The patchset proceeds in four stages: - Patches #1-#3 are cleanups. - Patches #4 and #5 contain the new Qdisc. - Patches #6 and #7 update mlxsw to offload the new Qdisc. - Patches #8-#10 add selftests for ETS. Examples: - Add a Qdisc with 6 bands, 3 strict and 3 ETS with 45%-30%-25% weights: # tc qdisc add dev swp1 root handle 1: \ ets strict 3 quanta 4500 3000 2500 priomap 0 1 1 1 2 3 4 5 # tc qdisc sh dev swp1 qdisc ets 1: root refcnt 2 bands 6 strict 3 quanta 4500 3000 2500 priomap 0 1 1 1 2 3 4 5 5 5 5 5 5 5 5 5 - Tweak quantum of one of the classes of the previous Qdisc: # tc class ch dev swp1 classid 1:4 ets quantum 1000 # tc qdisc sh dev swp1 qdisc ets 1: root refcnt 2 bands 6 strict 3 quanta 1000 3000 2500 priomap 0 1 1 1 2 3 4 5 5 5 5 5 5 5 5 5 # tc class ch dev swp1 classid 1:3 ets quantum 1000 Error: Strict bands do not have a configurable quantum. - Purely strict Qdisc with 1:1 mapping between priorities and TCs: # tc qdisc add dev swp1 root handle 1: \ ets strict 8 priomap 7 6 5 4 3 2 1 0 # tc qdisc sh dev swp1 qdisc ets 1: root refcnt 2 bands 8 strict 8 priomap 7 6 5 4 3 2 1 0 7 7 7 7 7 7 7 7 - Use "bands" to specify number of bands explicitly. Underspecified bands are implicitly ETS and their quantum is taken from MTU. The following thus gives each band the same weight: # tc qdisc add dev swp1 root handle 1: \ ets bands 8 priomap 7 6 5 4 3 2 1 0 # tc qdisc sh dev swp1 qdisc ets 1: root refcnt 2 bands 8 quanta 1514 1514 1514 1514 1514 1514 1514 1514 priomap 7 6 5 4 3 2 1 0 7 7 7 7 7 7 7 7 v2: - This addresses points raised by David Miller. - Patch #4: - sch_ets.c: Add a comment with description of the Qdisc and the dequeuing algorithm. - Kconfig: Add a high-level description to the help blurb. v1: - No changes, first upstream submission after RFC. v3 (internal): - This addresses review from Jiri Pirko. - Patch #3: - Rename to _HR_ instead of to _HIERARCHY_. - Patch #4: - pkt_sched.h: Keep all the TCA_ETS_ constants in one enum. - pkt_sched.h: Rename TCA_ETS_BANDS to _NBANDS, _STRICT to _NSTRICT, _BAND_QUANTUM to _QUANTA_BAND and _PMAP_BAND to _PRIOMAP_BAND. - sch_ets.c: Update to reflect the above changes. Add a new policy, ets_class_policy, which is used when parsing class changes. Currently that policy is the same as the quanta policy, but that might change. - sch_ets.c: Move MTU handling from ets_quantum_parse() to the one caller that makes use of it. - sch_ets.c: ets_qdisc_priomap_parse(): WARN_ON_ONCE on invalid attribute instead of returning an extack. - Patch #6: - __mlxsw_sp_qdisc_ets_replace(): Pass the weights argument to this function in this patch already. Drop the weight computation. - mlxsw_sp_qdisc_prio_replace(): Rename "quanta" to "zeroes" and pass for the abovementioned "weights". - mlxsw_sp_qdisc_prio_graft(): Convert to a wrapper around __mlxsw_sp_qdisc_ets_graft(), instead of invoking the latter directly from mlxsw_sp_setup_tc_prio(). - Update to follow the _HIERARCHY_ -> _HR_ renaming. - Patch #7: - __mlxsw_sp_qdisc_ets_replace(): The "weights" argument passing and weight computation removal are now done in a previous patch. - mlxsw_sp_setup_tc_ets(): Drop case TC_ETS_REPLACE, which is handled earlier in the function. - Patch #3 (iproute2): - Add an example output to the commit message. - tc-ets.8: Fix output of two examples. - tc-ets.8: Describe default values of "bands", "quanta". - q_ets.c: A number of fixes in error messages. - q_ets.c: Comment formatting: /*padding*/ -> /* padding */ - q_ets.c: parse_nbands: Move duplicate checking to callers. - q_ets.c: Don't accept both "quantum" and "quanta" as equivalent. v2 (internal): - This addresses review from Ido Schimmel and comments from Alexander Kushnarov. - Patch #2: - s/coment/comment in the commit message. - Patch #4: - sch_ets: ets_class_is_strict(), ets_class_id(): Constify an argument - ets_class_find(): RXTify - Patch #3 (iproute2): - tc-ets.8: some spelling fixes - tc-ets.8: add another example - tc.8: add an ETS to "CLASSFUL QDISCS" section v1 (internal): - This addresses RFC reviews from Ido Schimmel and Roman Mashak, bugs found by Alexander Petrovskiy and myself, and other improvements. - Patch #2: - Expand the explanation with an explicit example. - Patch #4: - Kconfig: s/sch_drr/sch_ets/ - sch_ets: Reorder includes to be in alphabetical order - sch_ets: ets_quantum_parse(): Rename the return-pointer argument from pquantum to quantum, and use it directly, not going through a local temporary. - sch_ets: ets_qdisc_quanta_parse(): Convert syntax of function argument "quanta" from an array to a pointer. - sch_ets: ets_qdisc_priomap_parse(): Likewise with "priomap". - sch_ets: ets_qdisc_quanta_parse(), ets_qdisc_priomap_parse(): Invoke __nla_validate_nested directly instead of nl80211_validate_nested(). - sch_ets: ets_qdisc_quanta_parse(): WARN_ON_ONCE on invalid attribute instead of returning an extack. - sch_ets: ets_qdisc_change(): Make the last band the default one for unmentioned priomap priorities. - sch_ets: Fix a panic when an offloaded child in a bandwidth-sharing band notified its ETS parent. - sch_ets: When ungrafting, add the newly-created invisible FIFO to the Qdisc hash - Patch #5: - pkt_cls.h: Note that quantum=0 signifies a strict band. - Fix error path handling when ets_offload_dump() fails. - Patch #6: - __mlxsw_sp_qdisc_ets_replace(): Convert syntax of function arguments "quanta" and "priomap" from arrays to pointers. - Patch #7: - __mlxsw_sp_qdisc_ets_replace(): Convert syntax of function argument "weights" from an array to a pointer. - Patch #9: - mlxsw/sch_ets.sh: Add a comment explaining packet prioritization. - Adjust the whole suite to allow testing of traffic classifiers in addition to testing priomap. - Patch #10: - Add a number of new tests to test default priomap band, overlarge number of bands, zeroes in quanta, and altogether missing quanta. - Patch #1 (iproute2): - State motivation for inclusion of this patch in the patcheset in the commit message. - Patch #3 (iproute2): - tc-ets.8: it is now December - tc-ets.8: explain inactivity WRT using non-WC Qdiscs under ETS band - tc-ets.8: s/flow/band in explanation of quantum - tc-ets.8: explain what happens with priorities not covered by priomap - tc-ets.8: default priomap band is now the last one - q_ets.c: ets_parse_opt(): Remove unnecessary initialization of priomap and quanta. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Add TDC coverage for the new ETS Qdisc. Signed-off-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
This tests the newly-added ETS Qdisc. It runs two to three streams of traffic, each with a different priority. ETS Qdisc is supposed to allocate bandwidth according to the DRR algorithm and given weights. After running the traffic for a while, counters are compared for each stream to check that the expected ratio is in fact observed. In order for the DRR process to kick in, a traffic bottleneck must exist in the first place. In slow path, such bottleneck can be implemented by wrapping the ETS Qdisc inside a TBF or other shaper. This might however make the configuration unoffloadable. Instead, on HW datapath, the bottleneck would be set up by lowering port speed and configuring shared buffer suitably. Therefore the test is structured as a core component that implements the testing, with two wrapper scripts that implement the details of slow path resp. fast path configuration. Signed-off-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
These two functions are used for starting several streams of traffic, and then stopping them later. They will be handy for the test coverage of ETS Qdisc. Move them from mlxsw-specific qos_lib.sh to the generic lib.sh. Signed-off-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Handle TC_SETUP_QDISC_ETS, add a new ops structure for the ETS Qdisc. Invoke the extended prio handlers implemented in the previous patch. For stats ops, invoke directly the prio callbacks, which are not sensitive to differences between PRIO and ETS. Signed-off-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Thanks to the similarity between PRIO and ETS it is possible to simply reuse most of the code for offloading PRIO Qdisc. Extract the common functionality into separate functions, making the current PRIO handlers thin API adapters. Extend the new functions to pass quanta for individual bands, which allows configuring a subset of bands as WRR. Invoke mlxsw_sp_port_ets_set() as appropriate to de/configure WRR-ness and weight of individual bands. Signed-off-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Add hooks at appropriate points to make it possible to offload the ETS Qdisc. Signed-off-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Introduces a new Qdisc, which is based on 802.1Q-2014 wording. It is PRIO-like in how it is configured, meaning one needs to specify how many bands there are, how many are strict and how many are dwrr, quanta for the latter, and priomap. The new Qdisc operates like the PRIO / DRR combo would when configured as per the standard. The strict classes, if any, are tried for traffic first. When there's no traffic in any of the strict queues, the ETS ones (if any) are treated in the same way as in DRR. Signed-off-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
These enums want to be named MLXSW_REG_QEEC_HIERARCHY_, but due to a typo lack the second H. That is confusing and complicates searching. But actually the enumerators should be named _HR_, because that is how their enum type is called. So rename them as appropriate. Signed-off-by: NPetr Machata <petrm@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
Expand the comment at mlxsw_sp_qdisc_prio_graft() to make the problem that this function is trying to handle clearer. Signed-off-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Machata 提交于
The bit about negating HW backlog left me scratching my head. Clarify the comment. Signed-off-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Turns out tin_quantum_prio isn't used anymore and is a leftover from a previous implementation of diffserv tins. Since the variable isn't used in any calculations it can be eliminated. Drop variable and places where it was set. Rename remaining variable and consolidate naming of intermediate variables that set it. Signed-off-by: NKevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: NToke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Julian Wiedmann says: ==================== s390/qeth: features 2019-12-18 please apply the following patch series to your net-next tree. Nothing major, just the usual mix of small improvements and cleanups. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
qeth_qdio_start_poll() is called from the qdio layer's IRQ handler, while IRQs are masked. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
Convert the old code to use struct qeth_ipa_caps, and while at it remove all unused helper macros. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
As commit df2a2a52 ("s390/qeth: convert IP table spinlock to mutex") converted the ip_lock to a mutex, we no longer have to yield it while the subsequent IO sleep-waits for completion. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
This is a leftover from back when a recovery action didn't go through dev_close(), and was meant to shoot down all remaining af_iucv sockets on the interface. Now that the offline path always calls dev_close(), the NETDEV_GOING_DOWN event from __dev_close_many() is sufficient and this hack can be removed. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
Use inet_make_mask() to replace some complicated bit-fiddling. Also use the right data types to replace some raw memcpy calls with proper assignments. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
Consolidate some duplicated code for adding RXIP/VIPA addresses, and move the locking to where it's actually needed. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
The current code that dumps the RXIP/VIPA/IPATO addresses via sysfs first checks whether the buffer still provides sufficient space to hold another formatted address. But the maximum length of an formatted IPv4 address is 15 characters, not 12. So we underestimate the max required length and if the buffer was previously filled to _just_ the right level, a formatted address can end up being truncated. Revamp these code paths to use the _actually_ required length of the formatted IP address, and while at it suppress a gratuitous newline. Also use scnprintf() to format the output. In case of a truncation, this would allow us to return the number of characters that were actually written. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
card->wait_q is shared by different users, for different wake-up conditions. qeth_irq() can potentially trigger multiple of these conditions: 1) A change to channel->irq_pending, which qeth_send_control_data() is waiting for. 2) A change to card->state, which qeth_clear_channel() and qeth_halt_channel() are waiting for. As qeth_irq() does only a single wake_up(), we might miss to wake up a second eligible waiter. Luckily all waiters are guarded with a timeout, so this situation should recover on its own eventually. To make things work robustly, add an additional wake_up() for changes to channel->state. And extract a helper that updates channel->irq_pending along with the needed wake_up(). Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julian Wiedmann 提交于
A qeth device that's offline should not be receiving any IRQs - all pending IOs have been terminated, and we avoid starting any new ones. So rather than immediately registering the IRQ handler when the device is probed, only register it while the device is online. Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jose Abreu says: ==================== net: stmmac: TSN support using TAPRIO API This series adds TSN support (EST and Frame Preemption) for stmmac driver. 1) Adds the HW specific support for EST in GMAC5+ cores. 2) Adds the HW specific support for EST in XGMAC3+ cores. 3) Integrates EST HW specific support with TAPRIO scheduler API. 4) Adds the Frame Preemption suppor on stmmac TAPRIO implementation. 5) Adds the HW specific support for Frame Preemption in GMAC5+ cores. 6) Adds the HW specific support for Frame Preemption in XGMAC3+ cores. 7) Adds support for HW debug counters for Frame Preemption available in GMAC5+ cores. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
This can be useful for debug. Add these counters on GMAC5+ cores just like we did for XGMAC. Signed-off-by: NJose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
Adds the HW specific support for Frame Preemption on XGMAC3+ cores. Signed-off-by: NJose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
Adds the HW specific support for Frame Preemption on GMAC5+ cores. Signed-off-by: NJose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
Adds the support for Frame Preemption using TAPRIO API. This works along with EST feature and allows to select if preemptable traffic shall be sent during specific queues opening time. Signed-off-by: NJose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
Now that we have the EST code for XGMAC and QoS we can use it with the TAPRIO scheduler. Integrate it into the main driver and use the API to configure the EST feature. Signed-off-by: NJose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
Adds the support for EST in XGMAC cores. This feature allows to offload scheduling of queues opening time to the IP. Signed-off-by: NJose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jose Abreu 提交于
Adds the support for EST in GMAC5+ cores. This feature allows to offload scheduling of queues opening time to the IP. Signed-off-by: NJose Abreu <joabreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jose Abreu says: ==================== net: stmmac: Improvements for -next Misc improvements for stmmac. 1) Adds more information regarding HW Caps in the DebugFS file. 2) Allows interrupts to be independently enabled or disabled so that we don't have to schedule both TX and RX NAPIs. 3) Stops using a magic number in coalesce timer re-arm. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-