Tracking of dirty pages in shared writeable mmap()s.

The idea is simple: write protect clean shared writeable pages, catch the
write-fault, make writeable and set dirty.  On page write-back clean all the
PTE dirty bits and write protect them once again.

The implementation is a tad harder, mainly because the default
backing_dev_info capabilities were too loosely maintained.  Hence it is not
enough to test the backing_dev_info for cap_account_dirty.

The current heuristic is as follows, a VMA is eligible when:
 - its shared writeable
    (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED)
 - it is not a 'special' mapping
    (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0
 - the backing_dev_info is cap_account_dirty
    mapping_cap_account_dirty(vma->vm_file->f_mapping)
 - f_op->mmap() didn't change the default page protection

Page from remap_pfn_range() are explicitly excluded because their COW
semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and
because they don't have a backing store anyway.

mprotect() is taught about the new behaviour as well.  However it overrides
the last condition.

Cleaning the pages on write-back is done with page_mkclean() a new rmap call.
It can be called on any page, but is currently only implemented for mapped
pages, if the page is found the be of a VMA that accounts dirty pages it will
also wrprotect the PTE.

Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from
under ->private_lock.  This seems to be safe, since ->private_lock is used to
serialize access to the buffers, not the page itself.  This is needed because
clear_page_dirty() will call into page_mkclean() and would thereby violate
locking order.

[dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce a VM_BUG_ON, which is turned on with CONFIG_DEBUG_VM.  Use this
in the lightweight, inline refcounting functions; PageLRU and PageActive
checks in vmscan, because they're pretty well confined to vmscan.  And in
page allocate/free fastpaths which can be the hottest parts of the kernel
for kbuilds.

Unlike BUG_ON, VM_BUG_ON must not be used to execute statements with
side-effects, and should not be used outside core mm code.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Give non-highmem architectures access to the kmap API for the purposes of
overriding (this is what the attached patch does).

The proposal is that we should now require all architectures with coherence
issues to manage data coherence via the kmap/kunmap API.  Thus driver
writers never have to write code like

    kmap(page)
    modify data in page
    flush_kernel_dcache_page(page)
    kunmap(page)

instead, kmap/kunmap will manage the coherence and driver (and filesystem)
writers don't need to worry about how to flush between kmap and kunmap.

For most architectures, the page only needs to be flushed if it was
actually written to *and* there are user mappings of it, so the best
implementation looks to be: clear the page dirty pte bit in the kernel page
tables on kmap and on kunmap, check page->mappings for user maps, and then
the dirty bit, and only flush if it both has user mappings and is dirty.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Original commit code assumes, that when a buffer on BJ_SyncData list is
locked, it is being written to disk.  But this is not true and hence it can
lead to a potential data loss on crash.  Also the code didn't count with
the fact that journal_dirty_data() can steal buffers from committing
transaction and hence could write buffers that no longer belong to the
committing transaction.  Finally it could possibly happen that we tried
writing out one buffer several times.

The patch below tries to solve these problems by a complete rewrite of the
data commit code.  We go through buffers on t_sync_datalist, lock buffers
needing write out and store them in an array.  Buffers are also immediately
refiled to BJ_Locked list or unfiled (if the write out is completed).  When
the array is full or we have to block on buffer lock, we submit all
accumulated buffers for IO.

[suitable for 2.6.18.x around the 2.6.19-rc2 timeframe]
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

get_cpu_var()/per_cpu()/__get_cpu_var() arguments must be simple
identifiers.  Otherwise the arch dependent implementations might break.

This patch enforces the correct usage of the macros by producing a syntax
error if the variable is not a simple identifier.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The scheduler will stop load balancing if the most busy processor contains
processes pinned via processor affinity.

The scheduler currently only does one search for busiest cpu.  If it cannot
pull any tasks away from the busiest cpu because they were pinned then the
scheduler goes into a corner and sulks leaving the idle processors idle.

F.e.  If you have processor 0 busy running four tasks pinned via taskset,
there are none on processor 1 and one just started two processes on
processor 2 then the scheduler will not move one of the two processes away
from processor 2.

This patch fixes that issue by forcing the scheduler to come out of its
corner and retrying the load balancing by considering other processors for
load balancing.

This patch was originally developed by John Hawkes and discussed at

    http://marc.theaimsgroup.com/?l=linux-kernel&m=113901368523205&w=2.

I have removed extraneous material and gone back to equipping struct rq
with the cpu the queue is associated with since this makes the patch much
easier and it is likely that others in the future will have the same
difficulty of figuring out which processor owns which runqueue.

The overhead added through these patches is a single word on the stack if
the kernel is configured to support 32 cpus or less (32 bit).  For 32 bit
environments the maximum number of cpus that can be configued is 255 which
would result in the use of 32 bytes additional on the stack.  On IA64 up to
1k cpus can be configured which will result in the use of 128 additional
bytes on the stack.  The maximum additional cache footprint is one
cacheline.  Typically memory use will be much less than a cacheline and the
additional cpumask will be placed on the stack in a cacheline that already
contains other local variable.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: John Hawkes <hawkes@sgi.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Peter Williams <pwil3058@bigpond.net.au>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] Fix oops introduced in non-uniform port handling fix
  [PATCH] ata-piix: fixes kerneldoc error

Noticed by several people.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NetLabel]: update docs with website information
  [NetLabel]: rework the Netlink attribute handling (part 2)
  [NetLabel]: rework the Netlink attribute handling (part 1)
  [Netlink]: add nla_validate_nested()
  [NETLINK]: add nla_for_each_nested() to the interface list
  [NetLabel]: change the SELinux permissions
  [NetLabel]: make the CIPSOv4 cache spinlocks bottom half safe
  [NetLabel]: correct improper handling of non-NetLabel peer contexts
  [TCP]: make cubic the default
  [TCP]: default congestion control menu
  [ATM] he: Fix __init/__devinit conflict
  [NETFILTER]: Add dscp,DSCP headers to header-y
  [DCCP]: Introduce dccp_probe
  [DCCP]: Use constants for CCIDs
  [DCCP]: Introduce constants for CCID numbers
  [DCCP]: Allow default/fallback service code.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SOUND] sparc/amd7930: Use __devinit and __devinitdata as needed.
  [SUNLANCE]: Mark sparc_lance_probe_one as __devinit.
  [SPARC64]: Fix section-mismatch errors in solaris emul module.

The v4l2 API documentation for VIDIOC_ENUMSTD says:

	To enumerate all standards applications shall begin at index
	zero, incrementing by one until the driver returns EINVAL.

The actual code, however, tests the index this way:

               if (index<=0 || index >= vfd->tvnormsize) {
                        ret=-EINVAL;

So any application which passes in index=0 gets EINVAL right off the bat
- and, in fact, this is what happens to mplayer.  So I think the
following patch is called for, and maybe even appropriate for a 2.6.18.x
stable release.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Invoking load_module() before param_sysfs_init() is called crashes in
mod_sysfs_setup(), since the kset in module_subsys is not initialized yet.

In my case, net-pf-1 is getting modprobed as a result of hotplug trying to
create a UNIX socket.  Calls to hotplug begin after the topology_init
initcall.

Another patch for the same symptom (module_subsys-initialize-earlier.patch)
moves param_sysfs_init() to the subsys initcalls, but this is still not
early enough in the boot process in some cases.  In particular,
topology_init() causes /sbin/hotplug to run, which requests net-pf-1 (the
UNIX socket protocol) which can be compiled as a module.  Moving
param_sysfs_init() to the postcore initcalls fixes this particular race,
but there might well be other cases where a usermodehelper causes a module
to load earlier still.

The patch makes load_module() return an error rather than crashing the
kernel if invoked before module_subsys is initialized.

Cc: Mark Huang <mlhuang@cs.princeton.edu>
Cc: Greg KH <greg@kroah.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If there is only 1 node in the system cpus should think they are apart of
some other node.

If cases where a real numa system boots the Flat numa option make sure the
cpus don't claim to be apart on a non-existent node.
Signed-off-by: NKeith Mannthey <kmannth@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Assume that a cpu is *physically* offlined at boot time...

Because smpboot.c::smp_boot_cpu_map() canoot find cpu's sapicid,
numa.c::build_cpu_to_node_map() cannot build cpu<->node map for
offlined cpu.

For such cpus, cpu_to_node map should be fixed at cpu-hot-add.
This mapping should be done before cpu onlining.

This patch also handles cpu hotremove case.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Problem description:

  We have additional_cpus= option for allocating possible_cpus.  But nid
  for possible cpus are not fixed at boot time.  cpus which is offlined at
  boot or cpus which is not on SRAT is not tied to its node.  This will
  cause panic at cpu onlining.

Usually, pxm_to_nid() mapping is fixed at boot time by SRAT.

But, unfortunately, some system (my system!) do not include
full SRAT table for possible cpus.  (Then, I use
additiona_cpus= option.)

For such possible cpus, pxm<->nid should be fixed at
hot-add.  We now have acpi_map_pxm_to_node() which is also
used at boot.  It's suitable here.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Seems like not all drivers use the framebuffer_alloc() function and won't
have an initialized mutex.  But those don't have a backlight, anyway.
Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch>
Cc: Olaf Hering <olaf@aepfle.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Daniel R Thompson <daniel.thompson@st.com>
Cc: Jon Smirl <jonsmirl@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Stops panic associated with attempting to free a non slab-allocated
per_cpu_pageset.
Signed-off-by: NDavid Rientjes <rientjes@cs.washington.edu>
Acked-by: NChristoph Lameter <clameter@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With CONFIG_PHYSICAL_START set to a non default values the i386
boot_ioremap code calculated its pte index wrong and users of boot_ioremap
have their areas incorrectly mapped (for me SRAT table not mapped during
early boot).  This patch removes the addr < BOOT_PTE_PTRS constraint.

[ Keith says this is applicable to 2.6.16 and 2.6.17 as well ]

Signed-off-by: Keith Mannthey<kmannth@us.ibm.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: <stable@kernel.org>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

BUG: warning at kernel/lockdep.c:1816/trace_hardirqs_on() (Not tainted)
 [<c04051ee>] show_trace_log_lvl+0x58/0x171
 [<c0405802>] show_trace+0xd/0x10
 [<c040591b>] dump_stack+0x19/0x1b
 [<c043abee>] trace_hardirqs_on+0xa2/0x11e
 [<c06143c3>] _spin_unlock_irq+0x22/0x26
 [<c0541540>] rtc_get_rtc_time+0x32/0x176
 [<c0419ba4>] hpet_rtc_interrupt+0x92/0x14d
 [<c0450f94>] handle_IRQ_event+0x20/0x4d
 [<c0451055>] __do_IRQ+0x94/0xef
 [<c040678d>] do_IRQ+0x9e/0xbd
 [<c0404a49>] common_interrupt+0x25/0x2c
DWARF2 unwinder stuck at common_interrupt+0x25/0x2c
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If the timeout of an autofs mount is set to zero then umounts are disabled.
 This works fine, however the kernel module checks the expire timeout and
goes no further if it is zero.  This is not the right thing to do at
shutdown as the module is passed an option to expire mounts regardless of
their timeout setting.

This patch allows autofs to honor the force expire option.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixes an error in kerneldoc of ata_piix.c.
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fixes section-mismatch errors.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes section mismatch warnings when built as a module.

Also, mark find_ledma and sun4 init function as __devinit
too.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

init_socksys() was marked __init but invoked from a
non-__init function.

Use the correct module_{init,exit}() faciltiies while we're
here and eliminate some seriously bogus ifdefs.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that all of the supporting pieces of NetLabel have a home at SourceForge
update the Kconfig help text and add an entry to the MAINTAINERS file.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At the suggestion of Thomas Graf, rewrite NetLabel's use of Netlink attributes
to better follow the common Netlink attribute usage.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At the suggestion of Thomas Graf, rewrite NetLabel's use of Netlink attributes
to better follow the common Netlink attribute usage.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new function, nla_validate_nested(), to validate nested Netlink
attributes.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At the top of include/net/netlink.h is a list of Netlink interfaces, however,
the nla_for_each_nested() macro was not listed.  This patch adds this interface
to the list at the top of the header file.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change NetLabel to use the 'recvfrom' socket permission and the
SECINITSID_NETMSG SELinux SID as the NetLabel base SID for incoming packets.
This patch effectively makes the old, and currently unused, SELinux NETMSG
permissions NetLabel permissions.
Signed-of-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The CIPSOv4 cache traversal routines are triggered both the userspace events
(cache invalidation due to DOI removal or updated SELinux policy) and network
packet processing events.  As a result there is a problem with the existing
CIPSOv4 cache spinlocks as they are not bottom-half/softirq safe.  This patch
converts the CIPSOv4 cache spin_[un]lock() calls into spin_[un]lock_bh() calls
to address this problem.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a problem where NetLabel would always set the value of 
sk_security_struct->peer_sid in selinux_netlbl_sock_graft() to the context of
the socket, causing problems when users would query the context of the
connection.  This patch fixes this so that the value in
sk_security_struct->peer_sid is only set when the connection is NetLabel based,
otherwise the value is untouched.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

They all contain the same thing.  Instead, have a single generic one in
include/asm-generic, and permit an arch to override as needed.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Change default congestion control used from BIC to the newer CUBIC
which it the successor to BIC but has better properties over long delay links.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change how default TCP congestion control is chosen. Don't just use
last installed module, instead allow selection during configuration,
and make sure and use the default regardless of load order.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

he_init_one() is declared __devinit, but calls lots of init functions
that are marked __init.  However, if CONFIG_HOTPLUG is enabled,
__devinit functions go into normal .text, which leads to

    WARNING: drivers/atm/he.o - Section mismatch: reference to .init.text: from .text between 'he_start' (at offset 0x2130) and 'he_service_tbrq'

Fix this by changing the __init functions to __devinit.
Signed-off-by: NRoland Dreier <roland@digitalvampire.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

To whoever had written that code:

 a) priority of >> is higher than that of &
 b) priority of typecast is higher than that of any binary operator
 c) learn the fscking C
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ql3xxx_probe() does ioremap and stores result in ->mem_map_registers.
On failure exit it does iounmap() of the same thing.

OTOH, ql3xxx_remove() does iounmap() of ->mmap_virt_base which is
 (a) never assigned and
 (b) never used other than in that iounmap() call.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>