The *at patches introduced fstatat and, due to inusfficient research, I
used the newfstat functions generally as the guideline.  The result is that
on 32-bit platforms we don't have all the information needed to implement
fstatat64.

This patch modifies the code to pass up 64-bit information if
__ARCH_WANT_STAT64 is defined.  I renamed the syscall entry point to make
this clear.  Other archs will continue to use the existing code.  On x86-64
the compat code is implemented using a new sys32_ function.  this is what
is done for the other stat syscalls as well.

This patch might break some other archs (those which define
__ARCH_WANT_STAT64 and which already wired up the syscall).  Yet others
might need changes to accomodate the compatibility mode.  I really don't
want to do that work because all this stat handling is a mess (more so in
glibc, but the kernel is also affected).  It should be done by the arch
maintainers.  I'll provide some stand-alone test shortly.  Those who are
eager could compile glibc and run 'make check' (no installation needed).

The patch below has been tested on x86 and x86-64.
Signed-off-by: NUlrich Drepper <drepper@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Ben Dooks

Define the bits for the two board control latches
that control various items on the H1940 iPAQ.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Serial drivers in general should not write uart_info->flags - they're
private to serial_core.  Serial drivers have no need to fiddle with
tty->alt_speed, nor manipulate TTY_IO_ERROR in tty->flags.  Fix the
ioc4 serial driver for both these points by simply removing the
offending code.

Acked-by: pfg@sgi.com
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/s390/kernel/compat_signal.c:199: error: conflicting types for 'do_sigaction'
include/linux/sched.h:1115: error: previous declaration of 'do_sigaction' was here
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This adds some additional comments in order to help others figure out how
exactly the code works.  And fix a variable name.

Also swap_page does need to ignore all reference bits when unmapping a
page.  Otherwise we may have to repeatedly unmap a frequently touched page.
So change the try_to_unmap parameter to 1.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Prevent stalled processing of received data when a driver allocates tty
buffer space but does not immediately follow the allocation with more data
and a call to schedule receive tty processing.  (example: hvc_console) This
bug was introduced by the first locking patch for the new tty buffering.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Prevents deadlock situation between
kmem_cache_create()/kmem_cache_destory(), and kmem_cache_create() /cpu
hotplug.  The locking order probably got moved over time.
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sys_shmdt() can manage shm segments which are covered by multiple vmas.  (This
can happen when a user uses mprotect() after shmat().)

This works well if shm is aligned to PAGE_SIZE, but if not, the last
segment cannot be detached.  It is because a comparison in sys_shmdt()

	(vma->vm_end - addr) < size
		addr == return address of shmat()
		size == shmsize, argments to shmget()

size should be aligned to PAGE_SIZE before being compared with vma->vm_end,
which is aligned.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: NHugh Dickins <hugh@veritas.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When panic_timeout is zero, suppress triggering a nested panic due to soft
lockup detection.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initialising cpu_possible_map to all-ones with CONFIG_HOTPLUG_CPU means that

a) All for_each_cpu() loops will iterate across all NR_CPUS CPUs, rather
   than over possible ones.  That can be quite expensive.

b) Soon we'll be allocating per-cpu areas only for possible CPUs.  So with
   CPU_MASK_ALL, we'll be wasting memory.

I also switched voyager over to not use CPU_MASK_ALL in the non-CPU-hotplug
case.  Should be OK..

I note that parisc is also using CPU_MASK_ALL.  Suggest that it stop doing
that.

Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Paul Jackson <pj@sgi.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Zwane Mwaikambo <zwane@linuxpower.ca>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We are setting up sources for building external modules like this:

  /usr/src/linux-obj> # create a .config file
  /usr/src/linux-obj> make -C /usr/src/linux O=$PWD oldconfig
  /usr/src/linux-obj> make -C /usr/src/linux O=$PWD prepare
  /usr/src/linux-obj> make -C /usr/src/linux O=$PWD scripts
  /usr/src/linux-obj> make -C /usr/src/linux O=$PWD clean

After that, external modules can be built with:

  /usr/src/module> make -C /usr/src/linux-obj M=$PWD

This fails for ppc32 because the `make clean' removes the
arch/powerpc/include directory.  This should be done in archmrproper
instead of in archclean.
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove bogus comment from init function which could lead to the assumption
that cpu_possible_map is setup in smp_prepare_cpus().
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It is possible that the reserved crashkernel region can be overlapped with
initrd since the bootloader sets the initrd location.  When the initrd
region is freed, the second kernel memory will not be contiguous.  The
Kexec_load can cause an oops since there is no contiguous memory to write
the second kernel or this memory could be used in the first kernel itself
and may not be part of the dump.  For example, on powerpc, the initrd is
located at 36MB and the crashkernel starts at 32MB.  The kexec_load caused
panic since writing into non-allocated memory (after 36MB).  We could see
the similar issue even on other archs.

One possibility is to move the initrd outside of crashkernel region.  But,
the initrd region will be freed anyway before the system is up.  This patch
fixes this issue and frees only regions that are not part of crashkernel
memory in case overlaps.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Firmware should go into /lib/firmware, not /etc/firmware.

Found by Alejandro Bonilla.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I don't think the code is quite ready, which is why I asked for Peter's
additions to also be merged before I acked it (although it turned out that
it still isn't quite ready with his additions either).

Basically I have had similar observations to Suresh in that it does not
play nicely with the rest of the balancing infrastructure (and raised
similar concerns in my review).

The samples (group of 4) I got for "maximum recorded imbalance" on a 2x2
SMP+HT Xeon are as follows:

            | Following boot | hackbench 20        | hackbench 40
 -----------+----------------+---------------------+---------------------
 2.6.16-rc2 | 30,37,100,112  | 5600,5530,6020,6090 | 6390,7090,8760,8470
 +nosmpnice |  3, 2,  4,  2  |   28, 150, 294, 132 |  348, 348, 294, 347

Hackbench raw performance is down around 15% with smpnice (but that in
itself isn't a huge deal because it is just a benchmark).  However, the
samples show that the imbalance passed into move_tasks is increased by
about a factor of 10-30.  I think this would also go some way to explaining
latency blips turning up in the balancing code (though I haven't actually
measured that).

We'll probably have to revert this in the SUSE kernel.

Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Peter Williams <pwil3058@bigpond.net.au>
Cc: "Martin J. Bligh" <mbligh@aracnet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Embedded boards that u-boot require a kernel image in the uImage format.
This allows a given board to specify it wants a uImage built by default.

This also fixes a warning at config time, as this symbol is referred
to in arch/powerpc/platforms/83xx/Kconfig.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Updated the documentation to include the definition of the USB device
node format for Freescale SOC devices.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Registers system call for the powerpc architecture.
Signed-off-by: NJanak Desai <janak@us.ibm.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

With this, new system calls only have to be wired up in one place
for ARCH=ppc and ARCH=powerpc, rather than 2.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Refactor how the bridge code interacts with kobject system.
It should still use kobjects even if not using sysfs.
Fix the error unwind handling in br_add_if.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Bridge netfilter code needs to handle the case where device is
removed from bridge while packet in process. In these cases the
bridge_parent can become null while processing.

This should fix: http://bugzilla.kernel.org/show_bug.cgi?id=5803Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change Bridge receive path to correctly handle RCU removal of device
from bridge.  Also fixes deadlock between carrier_check and del_nbp.
This replaces the previous deleted flag fix.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rcvbuf lock should probably be honored here.
Signed-off-by: NJohn Heffner <jheffner@psc.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes an out of range array access in irnet_irda.c.

Author: David Binderman <dcb314@hotmail.com>
Signed-off-by: NSamuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch set IrDA's addr_len properly, i.e to 4 bytes, the size of the
IrLAP device address.
Signed-off-by: NSamuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a netlink message is not related to a netlink socket,
it is issued by kernel socket with pid 0. Netlink "pid" has nothing
to do with current->pid. I called it incorrectly, if it was named "port",
the confusion would be avoided.
Signed-off-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netlink overrun was broken while improvement of netlink.
Destination socket is used in the place where it was meant to be source socket,
so that now overrun is never sent to user netlink sockets, when it should be,
and it even can be set on kernel socket, which results in complete deadlock
of rtnetlink.

Suggested fix is to restore status quo passing source socket as additional
argument to netlink_attachskb().

A little explanation: overrun is set on a socket, when it failed
to receive some message and sender of this messages does not or even
have no way to handle this error. This happens in two cases:
1. when kernel sends something. Kernel never retransmits and cannot
   wait for buffer space.
2. when user sends a broadcast and the message was not delivered
   to some recipients.
Signed-off-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clear unblockable signals beforehand.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Pointed out by Linus Torvalds.

sys_signal() forgets to initialize ->sa_mask.

( I suspect arch/ia64/ia32/ia32_signal.c:sys32_signal()
  also needs this fix )
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The sparc64 64 bit syscall table seems to be broken as it has
compat_sys_newfstatat in its syscall table instead of sys_newfstatat.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MCA driver can cause panic if kernel gets a state info with no minstate.
This patch adds minstate validation before handling it.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Pointed out by Oleg Nesterov <oleg@tv-sign.ru>, who in turn
got the hint from Linus.
Signed-off-by: NTony Luck <tony.luck@intel.com>