ftrace_dump is used for printing out the contents of the ftrace ring buffer
to the console on failure. Currently it uses a spinlock to synchronize
the output from multiple failures on different CPUs. This spin lock
currently is a normal spinlock and can cause issues with lockdep and
lock tracing.

This patch converts it to raw since it is for error handling only.
The lock is local to the ftrace_dump and is not used by any other
infrastructure.

[ Impact: prevent ftrace_dump from locking up by internal tracing ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

struct trace_entry->type is unsigned char, while trace event's id is
int type, thus for a event with id >= 256, it's entry->type is cast
to (id % 256), and then we can't see the trace output of this event.

 # insmod trace-events-sample.ko
 # echo foo_bar > /mnt/tracing/set_event
 # cat /debug/tracing/events/trace-events-sample/foo_bar/id
 256
 # cat /mnt/tracing/trace_pipe
           <...>-3548  [001]   215.091142: Unknown type 0
           <...>-3548  [001]   216.089207: Unknown type 0
           <...>-3548  [001]   217.087271: Unknown type 0
           <...>-3548  [001]   218.085332: Unknown type 0

[ Impact: fix output for trace events with id >= 256 ]
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <49EEDB0E.5070207@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

trace_printk can be called from any context, including NMIs.
If this happens, then we must test for for recursion before
grabbing any spinlocks.

This patch prevents trace_printk from being called recursively.

[ Impact: prevent hard lockup in lockdep event tracer ]

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Not all the necessary symbols were exported to allow for tracing
by modules. This patch adds them in.

[ Impact: allow modules to commit data to the ring buffer ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

trace is read-write and README is read-only.

[ Impact: fix /debug/tracing/ file permissions. ]
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
LKML-Reference: <49E7EAB6.4070605@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Export the cached task comms to userspace. This allows user apps to translate
the pids from a trace into their respective task command lines.

[ Impact: let userspace apps reading binary buffer know comm's of pids ]
Signed-off-by: NAvadh Patel <avadh4all@gmail.com>
[ added error checking and use of buf pointer to index file_buf ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Impact: let modules add trace events

The trace event code requires some functions to be exported to allow
modules to use TRACE_EVENT. This patch adds EXPORT_SYMBOL_GPL to the
necessary functions.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch changes filter_check_discard() to make use of the new
ring_buffer_discard_commit() function and modifies the current users to
call the old commit function in the non-discard case.

It also introduces a version of filter_check_discard() that uses the
global trace buffer (filter_current_check_discard()) for those cases.

v2 changes:

- fix compile error noticed by Ingo Molnar
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1239178554.10295.36.camel@tropicana>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The ring_buffer_discard_commit makes better usage of the ring_buffer
when an event has been discarded. It tries to remove it completely if
possible.

This patch converts the trace event filtering to use
ring_buffer_discard_commit instead of the ring_buffer_event_discard.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Frederic Weisbecker suggested that the trace_special event shouldn't be
filterable; this patch adds a TRACE_EVENT_FORMAT_NOFILTER event macro
that allows an event format to be exported without having a filter
attached, and removes filtering from the trace_special event.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds run-time field descriptions to all the event formats
exported using TRACE_EVENT_FORMAT.  It also hooks up all the tracers
that use them (i.e. the tracers in the 'ftrace subsystem') so they can
also have their output filtered by the event-filtering mechanism.

When I was testing this, there were a couple of things that fooled me
into thinking the filters weren't working, when actually they were -
I'll mention them here so others don't make the same mistakes (and file
bug reports. ;-)

One is that some of the tracers trace multiple events e.g. the
sched_switch tracer uses the context_switch and wakeup events, and if
you don't set filters on all of the traced events, the unfiltered output
from the events without filters on them can make it look like the
filtering as a whole isn't working properly, when actually it is doing
what it was asked to do - it just wasn't asked to do the right thing.

The other is that for the really high-volume tracers e.g. the function
tracer, the volume of filtered events can be so high that it pushes the
unfiltered events out of the ring buffer before they can be read so e.g.
cat'ing the trace file repeatedly shows either no output, or once in
awhile some output but that isn't there the next time you read the
trace, which isn't what you normally expect when reading the trace file.
If you read from the trace_pipe file though, you can catch them before
they disappear.

Changes from v1:

As suggested by Frederic Weisbecker:

- get rid of externs in functions
- added unlikely() to filter_check_discard()
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

I got these from strace:

 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 12288
 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 12288
 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 12288
 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 16384
 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 8192
 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 8192
 splice(0x3, 0, 0x5, 0, 0x1000, 0x1) = 8192

I wanted to splice_read 4096 bytes, but it returns 8192 or larger.

It is because the return value of tracing_buffers_splice_read()
does not include "zero out any left over data" bytes.

But tracing_buffers_read() includes these bytes, we make them
consistent.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49D46674.9030804@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Cleanup

These two lines:

	if (unlikely(*ppos))
		return -ESPIPE;

in tracing_buffers_splice_read() are not needed, VFS layer
has disabled seek(2).

We remove these two lines, and then we can update file->f_pos.

And tracing_buffers_read() updates file->f_pos, this fix
make tracing_buffers_splice_read() updates file->f_pos too.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49D46670.4010503@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Cleanup

Sometimes, we open trace_pipe_raw, but we don't read(2) it,
we just splice(2) it, thus, the page is not used.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49D4666B.4010608@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: disable pread()

We set tracing_buffers_fops.llseek to no_llseek,
but we can still perform pread() to read this file.

That is not expected.

This fix uses nonseekable_open() to disable it.

tracing_buffers_fops.llseek is still set to no_llseek,
it mark this file is a "non-seekable device" and is used by
sys_splice(). See also do_splice() or manual of splice(2):

ERRORS
       EINVAL Target file system doesn't support  splicing;
              neither  of the descriptors refers to a pipe;
              or offset given for non-seekable device.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <49D46668.8030806@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Most of the tracing files creation follow the same pattern:

ret = debugfs_create_file(...)
if (!ret)
	pr_warning("Couldn't create ... entry\n")

Unify it!
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1238109938-11840-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Some of the tracers have been renamed, which was not updated in the in-kernel
run-time README file. Update it.
Signed-off-by: NNikanth Karthikesan <knikanth@suse.de>
LKML-Reference: <200903231158.32151.knikanth@suse.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix a crash while cat trace file

Currently we are using a cpumask to remind each cpu where a
trace occured. It lets us notice the user that a cpu just had
its first trace.

But on latest -tip we have the following crash once we cat the trace
file:

IP: [<c0270c4a>] print_trace_fmt+0x45/0xe7
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/class/net/eth0/carrier
Pid: 3897, comm: cat Not tainted (2.6.29-tip-02825-g0f22972-dirty #81)
EIP: 0060:[<c0270c4a>] EFLAGS: 00010297 CPU: 0
EIP is at print_trace_fmt+0x45/0xe7
EAX: 00000000 EBX: 00000000 ECX: c12d9e98 EDX: ccdb7010
ESI: d31f4000 EDI: 00322401 EBP: d31f3f10 ESP: d31f3efc
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Process cat (pid: 3897, ti=d31f2000 task=d3b3cf20 task.ti=d31f2000)
Stack:
d31f4080 ccdb7010 d31f4000 d691fe70 ccdb7010 d31f3f24 c0270e5c d31f4000
d691fe70 d31f4000 d31f3f34 c02718e8 c12d9e98 d691fe70 d31f3f70 c02bfc33
00001000 09130000 d3b46e00 d691fe98 00000000 00000079 00000001 00000000
Call Trace:
[<c0270e5c>] ? print_trace_line+0x170/0x17c
[<c02718e8>] ? s_show+0xa7/0xbd
[<c02bfc33>] ? seq_read+0x24a/0x327
[<c02bf9e9>] ? seq_read+0x0/0x327
[<c02ab18b>] ? vfs_read+0x86/0xe1
[<c02ab289>] ? sys_read+0x40/0x65
[<c0202d8f>] ? sysenter_do_call+0x12/0x3c
Code: 00 00 00 89 45 ec f7 c7 00 20 00 00 89 55 f0 74 4e f6 86 98 10 00 00 02 74 45 8b 86 8c 10 00 00 8b 9e a8 10 00 00 e8 52 f3 ff ff <0f> a3 03 19 c0 85 c0 75 2b 8b 86 8c 10 00 00 8b 9e a8 10 00 00
EIP: [<c0270c4a>] print_trace_fmt+0x45/0xe7 SS:ESP 0068:d31f3efc
CR2: 0000000000000000
---[ end trace aa9cf38e5ebed9dd ]---

This is because we alloc the iter->started cpumask on tracing_pipe_open but
not on tracing_open.

It hadn't been noticed until now because we need to have ring buffer overruns
to activate the starting of cpu buffer detection.

Also, we need a check to not print the messagge for the first trace on the file.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1238619188-6109-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Building a kernel with tracing can raise the following warning on
tip/master:

kernel/trace/trace.c:1249: error: implicit declaration of function 'vbin_printf'

We are missing an include to string.h
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1238160130-7437-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix time output bug in 32bits system

ns2usecs() returns 'long', it's incorrect.

(In i386)
...
          <idle>-0     [000]   521.442100: _spin_lock <-tick_do_update_jiffies64
          <idle>-0     [000]   521.442101: do_timer <-tick_do_update_jiffies64
          <idle>-0     [000]   521.442102: update_wall_time <-do_timer
          <idle>-0     [000]   521.442102: update_xtime_cache <-update_wall_time
....
(It always print the time less than 2200 seconds besides ...)
Because 'long' is 32bits in i386. ( (1<<31) useconds is about 2200 seconds)

...
          <idle>-0     [001] 4154502640.134759: rcu_bh_qsctr_inc <-__do_softirq
          <idle>-0     [001] 4154502640.134760: _local_bh_enable <-__do_softirq
          <idle>-0     [001] 4154502640.134761: idle_cpu <-irq_exit
...
(very large value)
Because 'long' is a signed type and it is 32bits in i386.

Changes in v2:
return 'unsigned long long' instead of 'cycle_t'
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <49D05D10.4030009@cn.fujitsu.com>
Reported-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

graph time is the time that a function is executing another function.
Thus if function A calls B, if graph-time is set, then the time for
A includes B. This is the default behavior. But if graph-time is off,
then the time spent executing B is subtracted from A.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

If the function graph trace is enabled, the function profiler will
use it to take the timing of the functions.

 cat /debug/tracing/trace_stat/functions

  Function                               Hit    Time
  --------                               ---    ----
  mwait_idle                             127    183028.4 us
  schedule                                26    151997.7 us
  __schedule                              31    151975.1 us
  sys_wait4                                2    74080.53 us
  do_wait                                  2    74077.80 us
  sys_newlstat                           138    39929.16 us
  do_path_lookup                         179    39845.79 us
  vfs_lstat_fd                           138    39761.97 us
  user_path_at                           153    39469.58 us
  path_walk                              179    39435.76 us
  __link_path_walk                       189    39143.73 us
[...]

Note the times are skewed due to the function graph tracer not taking
into account schedules.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: give user a choice to show times spent while sleeping

The user may want to see the time a function spent sleeping.
This patch adds the trace option "sleep-time" to allow that.
The "sleep-time" option is default on.

 echo sleep-time > /debug/tracing/trace_options

produces:

 ------------------------------------------
 2)  avahi-d-3428  =>    <idle>-0
 ------------------------------------------

 2)               |      finish_task_switch() {
 2)   0.621 us    |        _spin_unlock_irq();
 2)   2.202 us    |      }
 2) ! 1002.197 us |    }
 2) ! 1003.521 us |  }

where as,

 echo nosleep-time > /debug/tracing/trace_options

produces:

 0)    <idle>-0    =>  yum-upd-3416
 ------------------------------------------

 0)               |              finish_task_switch() {
 0)   0.643 us    |                _spin_unlock_irq();
 0)   2.342 us    |              }
 0) + 41.302 us   |            }
 0) + 42.453 us   |          }
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: fix traces output

Sometimes one can observe an imbalance in the traces between function
calls and function return traces:

func1() {
    }
}

The curly brace inside func1() is the return of another function nested
inside func1. The return trace have been inserted in the buffer but not
the entry.
We are storing a return address on the function traces stack while we
haven't inserted its entry on the buffer, hence the imbalance on the
traces.

This is because the tracers doesn't check all failures that can happen
on buffer insertion.

This patch reports the tracing recursion failures and the ring buffer
failures. In such cases, we now restore the original return address for
the function, giving up its return trace.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237843021-11695-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix a crash with ftrace={nop,boot} parameter

If the nop or initcall tracers are launched as boot tracers,
they will attempt to create their option directory and files.
But these tracers are registered very early and then assigned
as "boot tracers" very early if asked to.

Since they do this before debugfs has been registered (core initcall),
a crash is triggered.

Another early tracers could also come later. So we fix it by
checking if debugfs is initialized before creating the root
tracing directory.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237759847-21025-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix hard-lockup with sched switch events

Some ftrace events, such as sched wakeup, can be traced
while the runqueue lock is hold. Since they are using
trace_current_buffer_unlock_commit(), they call wake_up()
which can try to grab the runqueue lock too, resulting in
a deadlock.

Now for all event, we call a new helper:
trace_nowake_buffer_unlock_commit() which do pretty the same than
trace_current_buffer_unlock_commit() except than it doesn't call
trace_wake_up().
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237759847-21025-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup.

This patch fixes the following sparse warnings:

 kernel/trace/trace.c:385:9: warning: symbol 'trace_seq_to_buffer' was
 not declared. Should it be static?

 kernel/trace/trace_clock.c:29:13: warning: symbol 'trace_clock_local'
 was not declared. Should it be static?

 kernel/trace/trace_clock.c:54:13: warning: symbol 'trace_clock' was not
 declared. Should it be static?

 kernel/trace/trace_clock.c:74:13: warning: symbol 'trace_clock_global'
 was not declared. Should it be static?
Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com>
LKML-Reference: <1237741871-5827-4-git-send-email-dmitri.vorobiev@movial.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: detect tracing related hangs

Sometimes, with some configs, the function graph tracer can make
the timer interrupt too much slow, hanging the kernel in an endless
loop of timer interrupts servicing.

As suggested by Ingo, this patch brings a watchdog which stops the
selftest after a defined number of functions traced, definitely
disabling this tracer.

For those who want to debug the cause of the function graph trace
hang, you can pass the ftrace_dump_on_oops kernel parameter to dump
the traces after this hang detection.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237694675-23509-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The function depth in trace_printk was to facilitate the function
graph output. Now that the function graph calculates the depth within
the trace output, we no longer need to record the depth when the
trace_printk is called.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch makes print_printk_msg_only and print_bprintk_msg_only
global for other functions to use. It also renames them by adding
a "trace_" to the beginning to avoid namespace collisions.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

There is currently no easy way to clear the trace buffer. Currently
the only way is to change the current tracer.

This patch lets the user clear the trace buffer by simply writing
into the trace files.

 echo > /debug/tracing/trace

or to clear a single cpu (i.e. for CPU 1):

 echo > /debug/tracing/per_cpu/cpu1/trace
Requested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: fix command line to pid mapping

map_cmdline_to_pid[] is checked in trace_save_cmdline(), but never
updated. This results in stale pid to command line mappings and the
tracer output will associate the wrong comm string.
Signed-off-by: NCarsten Emde <Carsten.Emde@osadl.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: prevent stale command line output

In case there is no valid command line mapping for a pid
trace_find_cmdline() returns without updating the comm buffer. The
trace dump keeps the previous entry which results in confusing trace
output:

     <idle>-0     [000]   280.702056 ....
     <idle>-23456 [000]   280.702080 ....

Update the comm buffer with "<...>" when no mapping is found.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

The command line recorder uses (unsigned) -1 to mark non mapped
entries in the pid to command line maps. The validity check is
completely unintuitive: idx >= SAVED_CMDLINES

There is no need for such casting games. Use a constant to mark
unmapped entries and check for that constant to make the code readable
and understandable.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: prevent overwrite of command line entries

When the tracer is stopped the command line recording continues to
record. The check for tracing_is_on() is not sufficient here as the
ringbuffer status is not affected by setting
debug/tracing/tracing_enabled to 0. On a non idle system this can
result in the loss of the command line information for the stopped
trace, which makes the trace harder to read and analyse.

Check tracer_enabled to allow further recording.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: feature to allow better serialized clock

This patch adds an option called "global-clock" that will allow
the tracer to switch to a slower but more accurate (across CPUs)
clock.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch adds a new function called ring_buffer_set_clock that
allows a tracer to assign its own clock source to the buffer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: fix for losing comms in trace

The command lines of tasks are cached at sched switch to not need
to record them at every trace point.  Disabling the tracing on stops
the recording of traces, but does not stop the caching of command lines.
When the tracing is off the cache may overflow and cause the tracing
to show incorrect tasks matching the PIDs.

This patch disables prevents updates to the comm cache when the ring buffer
is off.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: fix to one cause of incorrect comm outputs in trace

The spinlock only protected the creation of a comm <=> pid pair.
But it was possible that a reader could look up a pid, and get the
wrong comm because it had no locking.

This also required changing trace_find_cmdline to copy the comm cache
and not just send back a pointer to it.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: fix crashes when tracing cpumasks

While ring-buffer allocation, the cpumasks are allocated too,
including the tracing cpumask and the per-cpu file mask handler.
But these cpumasks are freed accidentally just after.
Fix it.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237164303-11476-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>