Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (212 commits)
  [PATCH] Fix breakage with CONFIG_SYSFS_DEPRECATED
  [ALSA] version 1.0.14rc2
  [ALSA] ASoC documentation updates
  [ALSA] ca0106 - Add missing sysfs device assignment
  [ALSA] aoa i2sbus: Stop Apple i2s DMA gracefully
  [ALSA] hda-codec - Add support for Fujitsu PI1556 Realtek ALC880
  [ALSA] aoa: remove suspend/resume printks
  [ALSA] Fix possible deadlocks in sequencer at removal of ports
  [ALSA] emu10k1 - Fix STAC9758 front channel
  [ALSA] soc - Clean up with kmemdup()
  [ALSA] snd-ak4114: Fix two array overflows
  [ALSA] ac97_bus power management
  [ALSA] usbaudio - Add support for Edirol UA-101
  [ALSA] hda-codec - Add ALC861VD/ALC660VD support
  [ALSA] soc - ASoC 0.13 Sharp poodle machine
  [ALSA] soc - ASoC 0.13 Sharp tosa machine
  [ALSA] soc - ASoC 0.13 spitz machine
  [ALSA] soc - ASoC Sharp corgi machine
  [ALSA] soc - ASoC 0.13 pxa2xx DMA
  [ALSA] soc - ASoC 0.13 pxa2xx AC97 driver
  ...

* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32:
  [AVR32] Add missing #include <linux/module.h>
  [AVR32] ssize_t should be long, not int
  [AVR32] Remove last remains of libgcc
  [AVR32] SPI platform code update
  [AVR32] Add PIOE device and reserve SDRAM pins
  [AVR32] Introduce at32_reserve_pin()
  [AVR32] Don't reset PIO state at bootup
  [AVR32] GPIO API implementation
  [AVR32] Use ARRAY_SIZE macro when appropriate
  [AVR32] Implement dma_mapping_error()
  [AVR32] Fix incorrect invalidation of shared cachelines
  [AVR32] ext int fixes
  [AVR32] fix serial port setup on ATSTK1000
  [AVR32] /proc/interrupts display
  Remove a couple final references to obsolete verify_area().

Remove find_trylock_page as per the removal schedule.
Signed-off-by: NNick Piggin <npiggin@suse.de>
[ Let's see if anybody screams ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (79 commits)
  [IPX]: Fix NULL pointer dereference on ipx unload
  [ATM]: atmarp.h needs to always include linux/types.h
  [NET]: Fix net/socket.c warnings.
  [NET]: cleanup sock_from_file()
  [NET]: change layout of ehash table
  [S390]: Add AF_IUCV socket support
  [S390]: Adapt special message interface to new IUCV API
  [S390]: Adapt netiucv driver to new IUCV API
  [S390]: Adapt vmlogrdr driver to new IUCV API
  [S390]: Adapt monreader driver to new IUCV API
  [S390]: Rewrite of the IUCV base code, part 2
  [S390]: Rewrite of the IUCV base code, part 1
  [X.25]: Adds /proc/net/x25/forward to view active forwarded calls.
  [X.25]: Adds /proc/sys/net/x25/x25_forward to control forwarding.
  [X.25]: Add call forwarding
  [XFRM]: xfrm_migrate() needs exporting to modules.
  [PFKEYV2]: CONFIG_NET_KEY_MIGRATE option
  [PFKEYV2]: Extension for dynamic update of endpoint address(es)
  [XFRM]: CONFIG_XFRM_MIGRATE option
  [XFRM]: User interface for handling XFRM_MSG_MIGRATE
  ...

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  MAINTAINERS: update DMFE and wireless drivers mailing list
  ucc_geth: Add support to local-mac-address property
  ucc_geth: Remove obsolete workaround of link speed change
  cxgb3: sysfs attributes in -mm tree
  Add Attansic L1 ethernet driver.

The fix for sysfs breakage with CONFIG_SYSFS_DEPRECATED was flown
away by the conflicted merge of the ALSA git tree.  The patch below
fixes it again.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

arch/avr32/kernel/cpu.c needs THIS_MODULE, so it must include
linux/module.h.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Since size_t is defined as unsigned long, ssize_t ought to be long
and not int. It could have been the other way around, but gcc defines
size_t as unsigned long, so this is correct.

This fixes a couple of printk format warnings.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Two libgcc headers were left around even though all the actual code
borrowed from libgcc is gone. Delete them.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Move stuff in spi.c into ATSTK1002 board code and update SPI
platform device definitions according to the new GPIO API.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

The PIOE device was left out before because it muxes SDRAM pins (and
is therefore a bit dangerous to mess with) and because no existing
drivers had any use for it.

It is needed for CompactFlash, however, and now that we have a way
to protect the SDRAM pins, it can be safely added.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

at32_reserve_pin() can be used for reserving portmux pins without
altering their configuration. Useful for e.g. SDRAM pins where we
really don't want to change the bootloader-provided configuration.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Leave the PIO lines as the bootloader left them. This allows us to
use PIOE without disturbing the SDRAM muxing.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Arch-neutral GPIO calls for AVR32. GPIO IRQ support written by
David Brownell.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

A patch to use ARRAY_SIZE macro already defined in linux/kernel.h
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

dma_map_single() never fails, so dma_mapping_error() simply returns 0.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Fix bug in dma_map_single(..., DMA_FROM_DEVICE) caused by incorrect
invalidation of shared cachelines at the beginning and/or end of
the specified buffer.  Those shared cachelines need to be flushed,
since they may hold valid data (which must not be discarded).
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Bugfixes for external irq handler set_irq_type():

 - If set_irq_type() can't set the type, don't change anything!

 - It's not OK to change the flow handler as part of set_irq_type(),
   among other issues that violates spinlock rules.  Instead, we can
   call the relevant handler when we demux the external interrupts.

 - The external irq demux has no need to grab the spinlock.  And in
   fact grabbing it that way was wrong, since that code might be
   pre-empted by an irq at a different priority level, and that code
   might then have tried to grab that spinlock...
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Fixes to USART setup on the stk-1000 ... don't configure USART 2, since
its TXD/RXD are used for INT-A and INT-B buttons; and configure USART 0
(for IRDA, and with corrected IRQ) iff SW2 has a non-default setting.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

The /proc/interrupts file should also display the irq_chip associated
with each irq ... e.g. INTC, EIM, GPIO.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

  Remove a couple final references to the obsolete verify_area() call,
which was long ago replaced by access_ok().
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Acked-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch updates the documentation for ASoC to reflect the recent
changes in API between 0.12.x and 0.13.x
Changes:-
 o Removed all reference to old API's.
 o Removed references and examples of automatic DAI config and matching.
 o Fixed 80 char line length on some files.
Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added the missing device assignment before creating sysfs tree.
This caused the insufficient device permissions.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This fixes the problem of getting extra bytes inserted at the
beginning of a recording when using the Apple i2s interface and DBDMA
controller.  It turns out that we can't just abort the DMA; we have to
let it stop at the end of a command, and then wait for the S7 bit to
be set before turning off the DBDMA controller.  Doing that for
playback doesn't seem to be necessary, but doesn't hurt either.
We use the technique used by the Darwin driver: make each transfer
command branch to a stop command if the S0 status bit is set.  Thus we
can ask the DMA controller to stop at the end of the current command
by setting S0.
The interrupt routine now looks at and clears the status word of the
DBDMA command ring.  This is necessary so it can know when the DBDMA
controller has seen that S0 is set, and so when it should look for the
DBDMA controller being stopped and S7 being set.  This also ended up
simplifying the calculation in i2sbus_pcm_pointer.
Tested on a 15 inch albook.
[Addition by Johannes]
I modified this patch and added the suspend/resume bits to it to get my
powermac into a decent state when playing sound across suspend to disk
that has a different bitrate from what the firmware programs the
hardware to.
I also added the SNDRV_PCM_INFO_JOINT_DUPLEX flag because it seemed the
right thing to do and I was looking at the info stuff.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch adds support for the Fujitsu PI1556 laptop.
Issue:  Volume knob on system maxes out lower than alsamixer (0x35 vs 0x40).
Everything else works, and audio quality is good at 0x35.
Signed-off-by: NTobin Davis <tdavis@dsl-only.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This just removes two useless printks.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fix possible rwsem deadlocks in sequencer code at removal of
sequencer ports.  The list_lock of port group can be double
locked.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

For some time now, some users of STAC9758 (emu10k1) would have no sound on
their front channels. This can be fixed (at least for me) by unmuting  head
phone volume and setting it to 0dB before removing the 'Front Playback'
control. For details, cf.
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2308
Find the appropriate patch attached.
Credits to: Raymond
Signed-off-by: NRolf Stefan Wilke <stefan.wilke@uni-ulm.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Clean up by replacing with kmemdup().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fix the handling of the TXCSB registers cache. There was one array
overflow in reg_write() and one in snd_ak4114_reg_write(). Thanks
to David Binderman for reporting the latter.
The second overflow probably doesn't matter much, given that the
function snd_ak4114_reg_write() appears to be never called. I wonder
why it exists and why it is exported.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch adds CONFIG_PM to the ac97_bus driver.
Signed-off-by: NMartin Langer <martin-langer@gmx.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added support for the Edirol UA-101 (only in high-speed mode) by taking
the quirks for the UA-1000 and change them accordingly. Changes were
made in 'usbaudio.c', 'usbaudio.h', and 'usbquirks.h'
MIDI and recording seem to work perfectly (with JACK), but playback
gives some few glitches. I think that's the mentioned
synchronizing-problem in the UA-1000 quirk ('FIXME: playback must be
synchronized to capture'), so I didn't change that.
ToDo: Adding Mixer-Support for the built-in
control-panel/patch-bay/router.
Signed-off-by: NBjoern Fay <mail@bfay.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

o Added ALC861VD support to patch_realtek.c under hda-intel
o Added ALC660VD as a model of 861VD
o Added pci quirks for Asus G1 as well as for two devices found in Realtek's
driver to point at ALC660VD model (3stack-660)
o Added pci quirk for Lenovo 3000 C200 - although untested, it should work
with ALC861VD 3stack model
o Changed preset id = 0x10ec0660 to point at new patch_alc861vd instead of
patch_861
o Organised the list of presets
Signed-off-by: NJakub Schmidtke <sjakub@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch updates the Sharp poodle machine driver to the new API in
ASoC 0.13.
Changes:-
o  Manually configure DAI hardware format.
o Removed config_sysclk() function. No longer needed as clocking is now
configured manually.
Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch updates the Sharp tosa machine driver to the new API in ASoC
0.13.
Changes:-
o  Update machine operations to new API.
Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>