- 09 3月, 2016 26 次提交
-
-
由 Christophe Lombard 提交于
Introduce sub-structures containing the bare-metal specific fields in the structures describing the adapter (struct cxl) and AFU (struct cxl_afu). Update all their references. Co-authored-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: NManoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Christophe Lombard 提交于
The hypervisor calls provide an interface with a coherent platform facility and function. It matches version 0.16 of the 'PAPR changes' document. The following hcalls are supported: H_ATTACH_CA_PROCESS Attach a process element to a coherent platform function. H_DETACH_CA_PROCESS Detach a process element from a coherent platform function. H_CONTROL_CA_FUNCTION Allow the partition to manipulate or query certain coherent platform function behaviors. H_COLLECT_CA_INT_INFO Collect interrupt info about a coherent. platform function after an interrupt occurred H_CONTROL_CA_FAULTS Control the operation of a coherent platform function after a fault occurs. H_DOWNLOAD_CA_FACILITY Support for downloading a base adapter image to the coherent platform facility, and for validating the entire image after the download. H_CONTROL_CA_FACILITY Allow the partition to manipulate or query certain coherent platform facility behaviors. Co-authored-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: NManoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Christophe Lombard 提交于
The hcalls introduced for cxl use a possible new value: H_STATE (invalid state). Co-authored-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: NManoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Frederic Barrat 提交于
The PSL interrupt cannot be multiplexed in a guest, as it is not supported by the hypervisor. So an interrupt will be allocated for it for each context. It will still be the first interrupt found in the first interrupt range, but is treated almost like any other AFU interrupt when creating/deleting the context. Only the handler is different. Rework the code so that the range 0 is treated like the other ranges. Co-authored-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: NManoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Frederic Barrat 提交于
The context parameter when calling cxl_irq() should be strongly typed. Co-authored-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: NManoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Frederic Barrat 提交于
A few functions are mostly common between bare-metal and guest and just need minor tuning. To avoid crowding the backend API, introduce a few 'if' based on the CPU being in HV mode. Co-authored-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: NManoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Frederic Barrat 提交于
Rename a few functions, changing the 'cxl_' prefix to either 'cxl_pci_' or 'cxl_native_', to make clear that the implementation is bare-metal specific. Those functions will have an equivalent implementation for a guest in a later patch. Co-authored-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: NManoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Frederic Barrat 提交于
The backend API (in cxl.h) lists some low-level functions whose implementation is different on bare-metal and in a guest. Each environment implements its own functions, and the common code uses them through function pointers, defined in cxl_backend_ops Co-authored-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: NManoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Frederic Barrat 提交于
CXL kernel API was defining the process problem state area during context initialization, making it possible to map the problem state area before attaching the context. This won't work on a powerVM guest. So force the logical behavior, like in userspace: attach first, then map the problem state area. Remove calls to cxl_assign_psn_space during init. The function is already called on the attach paths. Co-authored-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: NManoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Frederic Barrat 提交于
Move a few functions around to better separate code specific to bare-metal environment from code which will be commonly used between guest and bare-metal. Code specific to bare-metal is meant to be in native.c or pci.c only. It's basically anything which touches the card p1 registers, some p2 registers not needed from a guest and the PCI interface. Co-authored-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: NManoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Christophe Lombard 提交于
Move around some functions which will be accessed from the bare-metal and guest environments. Code in native.c and pci.c is meant to be bare-metal specific. Other files contain code which may be shared with guests. Co-authored-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: NChristophe Lombard <clombard@linux.vnet.ibm.com> Reviewed-by: NManoj Kumar <manoj@linux.vnet.ibm.com> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Andrew Donnellan 提交于
In eeh_pci_enable(), after making the request to set the new options, we call eeh_ops->wait_state() to check that the request finished successfully. At the moment, if eeh_ops->wait_state() returns 0, we return 0 without checking that it reflects the expected outcome. This can lead to callers further up the chain incorrectly assuming the slot has been successfully unfrozen and continuing to attempt recovery. On powernv, this will occur if pnv_eeh_get_pe_state() or pnv_eeh_get_phb_state() return 0, which in turn occurs if the relevant OPAL call returns OPAL_EEH_STOPPED_MMIO_DMA_FREEZE or OPAL_EEH_PHB_ERROR respectively. On pseries, this will occur if pseries_eeh_get_state() returns 0, which in turn occurs if RTAS reports that the PE is in the MMIO Stopped and DMA Stopped states. Obviously, none of these cases represent a successful completion of a request to thaw MMIO or DMA. Fix the check so that a wait_state() return value of 0 won't be considered successful for the EEH_OPT_THAW_MMIO or EEH_OPT_THAW_DMA cases. Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: NDaniel Axtens <dja@axtens.net> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
When eeh_dump_pe_log() is only called by eeh_slot_error_detail(), we already have the check that the PE isn't in PCI config blocked state in eeh_slot_error_detail(). So we needn't the duplicated check in eeh_dump_pe_log(). This removes the duplicated check in eeh_dump_pe_log(). No logical changes introduced. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
When passing through SRIOV VFs to guest, we possibly encounter EEH error on PF. In this case, the VF PEs are put into frozen state. The error could be reported to guest before it's captured by the host. That means the guest could attempt to recover errors on VFs before host gets chance to recover errors on PFs. The VFs won't be recovered successfully. This enforces the recovery order for above case: the recovery on child PE in guest is hold until the recovery on parent PE in host is completed. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: NRussell Currey <ruscur@russell.cc> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
When we have partial hotplug as part of the error recovery on PF, the VFs that are bound with vfio-pci driver will experience hotplug. That's not allowed. This checks if the VF PE is passed or not. If it does, we leave the VF without removing it. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: NRussell Currey <ruscur@russell.cc> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
When EEH error happened to the parent PE of those PEs that have been passed through to guest, the error is propagated to guest domain and the VFIO driver's error handlers are called. It's not correct as the error in the host domain shouldn't be propagated to guests and affect them. This adds one more limitation when calling EEH error handlers. If the PE has been passed through to guest, the error handlers won't be called. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: NRussell Currey <ruscur@russell.cc> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Wei Yang 提交于
PFs are enumerated on PCI bus, while VFs are created by PF's driver. In EEH recovery, it has two cases: 1. Device and driver is EEH aware, error handlers are called. 2. Device and driver is not EEH aware, un-plug the device and plug it again by enumerating it. The special thing happens on the second case. For a PF, we could use the original pci core to enumerate the bus, while for VF we need to record the VFs which aer un-plugged then plug it again. Also The patch caches the VF index in pci_dn, which can be used to calculate VF's bus, device and function number. Those information helps to locate the VF's PCI device instance when doing hotplug during EEH recovery if necessary. Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Wei Yang 提交于
After PE reset, OPAL API opal_pci_reinit() is called on all devices contained in the PE to reinitialize them. While skiboot is not aware of VFs, we have to implement the function in kernel to reinitialize VFs after reset on PE for VFs. In this patch, two functions pnv_pci_fixup_vf_mps() and pnv_eeh_restore_vf_config() both manipulate the MPS of the VF, since for a VF it has three cases. 1. Normal creation for a VF In this case, pnv_pci_fixup_vf_mps() is called to make the MPS a proper value compared with its parent. 2. EEH recovery without VF removed In this case, MPS is stored in pci_dn and pnv_eeh_restore_vf_config() is called to restore it and reinitialize other part. 3. EEH recovery with VF removed In this case, VF will be removed then re-created. Both functions are called. First pnv_pci_fixup_vf_mps() is called to store the proper MPS to pci_dn and then pnv_eeh_restore_vf_config() is called to do proper thing. This introduces two functions: pnv_pci_fixup_vf_mps() to fixup the VF's MPS to make sure it is equal to parent's and store this value in pci_dn for future use. pnv_eeh_restore_vf_config() to re-initialize on VF by restoring MPS, disabling completion timeout, enabling SERR, etc. Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Wei Yang 提交于
PEs for VFs don't have primary bus. So they have to have their own reset backend, which is used during EEH recovery. The patch implements the reset backend for VF's PE by issuing FLR or AF FLR to the VFs, which are contained in the PE. Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Wei Yang 提交于
This creates PEs for VFs in the weak function pcibios_bus_add_device(). Those PEs for VFs are identified with newly introduced flag EEH_PE_VF so that we treat them differently during EEH recovery. Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Wei Yang 提交于
VFs and their corresponding pdn are created and released dynamically when their PF's SRIOV capability is enabled and disabled. This creates and releases EEH devices for VFs when creating and releasing their pdn instances, which means EEH devices and pdn instances have same life cycle. Also, VF's EEH device is identified by (struct eeh_dev::physfn). Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Wei Yang 提交于
This restricts the EEH address cache to use only the first 7 BARs. This makes __eeh_addr_cache_insert_dev() ignore PCI bridge window and IOV BARs. As the result of this change, eeh_addr_cache_get_dev() will return VFs from VF's resource addresses instead of parent PFs. This also removes PCI bridge check as we limit __eeh_addr_cache_insert_dev() to 7 BARs and this effectively excludes PCI bridges from being cached. Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Wei Yang 提交于
As commit ac205b7b ("PCI: make sriov work with hotplug remove") indicates, VFs which is on the same PCI bus as their PF, should be removed before the PF. Otherwise, we might run into kernel crash at PCI unplugging time. This applies the above pattern to powerpc PCI hotplug path. Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Wei Yang 提交于
This adds weak function pcibios_bus_add_device() for arch dependent code could do proper setup. For example, powerpc could setup EEH related resources for SRIOV VFs. Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Wei Yang 提交于
During EEH recovery, hotplug is applied to the devices which don't have drivers or their drivers don't support EEH. However, the hotplug, which was implemented based on PCI bus, can't be applied to VF directly. Instead, we unplug and plug individual PCI devices (VFs). This renames virtn_{add,remove}() and exports them so they can be used in PCI hotplug during EEH recovery. Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
The original implementation is ugly: unnecessary if statements and "out" tag. This reworks the function to avoid above weaknesses. No functional changes introduced. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 03 3月, 2016 8 次提交
-
-
由 Aneesh Kumar K.V 提交于
No code changes. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
No code changes. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We don't need to update linux page table entry with _PAGE_HASHPTE early in hash pte fault. A parallel pte update will loop via _PAGE_BUSY and look at _PAGE_HASHPTE for a required hpte flush only if _PAGE_BUSY is cleared. That ensures a pte update will wait for a parallel hpte insert to finish before looking at _PAGE_HASHPTE bit. To avoid further confusion drop setting _PAGE_HASHPTE in cmpxchg in __hash_page_4K. commit 41743a4e ("powerpc: Free a PTE bit on ppc64 with 64K pages") did similar change for 64K config Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We are updating pte in those functions. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Kirill A. Shutemov 提交于
With next generation power processor, we are having a new mmu model [1] that require us to maintain a different linux page table format. Inorder to support both current and future ppc64 systems with a single kernel we need to make sure kernel can select between different page table format at runtime. With the new MMU (radix MMU) added, we will have two different pmd hugepage size 16MB for hash model and 2MB for Radix model. Hence make HPAGE_PMD related values as a variable. Actual conversion of HPAGE_PMD to a variable for ppc64 happens in a followup patch. [1] http://ibm.biz/power-isa3 (Needs registration). Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
This is needed so that we can support both hash and radix page table using single kernel. Radix kernel uses a 4 level table. We now use physical address in upper page table tree levels. Even though they are aligned to their size, for the masked bits we use the bit positions as per PowerISA 3.0. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We remove real_pte_t out of STRICT_MM_TYPESCHECK. Reviewed-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Aneesh Kumar K.V 提交于
We move the page table accessors into a separate header. We will later add a big endian variant of the table which is needed for radix. No functionality change only code movement. Reviewed-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 02 3月, 2016 6 次提交
-
-
由 Cyril Bur 提交于
This patch adds the ability to be able to save the VSX registers to the thread struct without giving up (disabling the facility) next time the process returns to userspace. This patch builds on a previous optimisation for the FPU and VEC registers in the thread copy path to avoid a possibly pointless reload of VSX state. Signed-off-by: NCyril Bur <cyrilbur@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Cyril Bur 提交于
This patch adds the ability to be able to save the VEC registers to the thread struct without giving up (disabling the facility) next time the process returns to userspace. This patch builds on a previous optimisation for the FPU registers in the thread copy path to avoid a possibly pointless reload of VEC state. Signed-off-by: NCyril Bur <cyrilbur@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Cyril Bur 提交于
This patch adds the ability to be able to save the FPU registers to the thread struct without giving up (disabling the facility) next time the process returns to userspace. This patch optimises the thread copy path (as a result of a fork() or clone()) so that the parent thread can return to userspace with hot registers avoiding a possibly pointless reload of FPU register state. Signed-off-by: NCyril Bur <cyrilbur@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Cyril Bur 提交于
This prepares for the decoupling of saving {fpu,altivec,vsx} registers and marking {fpu,altivec,vsx} as being unused by a thread. Currently giveup_{fpu,altivec,vsx}() does both however optimisations to task switching can be made if these two operations are decoupled. save_all() will permit the saving of registers to thread structs and leave threads MSR with bits enabled. This patch introduces no functional change. Signed-off-by: NCyril Bur <cyrilbur@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Cyril Bur 提交于
Currently the FPU, VEC and VSX facilities are lazily loaded. This is not a problem unless a process is using these facilities. Modern versions of GCC are very good at automatically vectorising code, new and modernised workloads make use of floating point and vector facilities, even the kernel makes use of vectorised memcpy. All this combined greatly increases the cost of a syscall since the kernel uses the facilities sometimes even in syscall fast-path making it increasingly common for a thread to take an *_unavailable exception soon after a syscall, not to mention potentially taking all three. The obvious overcompensation to this problem is to simply always load all the facilities on every exit to userspace. Loading up all FPU, VEC and VSX registers every time can be expensive and if a workload does avoid using them, it should not be forced to incur this penalty. An 8bit counter is used to detect if the registers have been used in the past and the registers are always loaded until the value wraps to back to zero. Several versions of the assembly in entry_64.S were tested: 1. Always calling C. 2. Performing a common case check and then calling C. 3. A complex check in asm. After some benchmarking it was determined that avoiding C in the common case is a performance benefit (option 2). The full check in asm (option 3) greatly complicated that codepath for a negligible performance gain and the trade-off was deemed not worth it. Signed-off-by: NCyril Bur <cyrilbur@gmail.com> [mpe: Move load_vec in the struct to fill an existing hole, reword change log] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> fixup
-
由 Cyril Bur 提交于
Currently when threads get scheduled off they always giveup the FPU, Altivec (VMX) and Vector (VSX) units if they were using them. When they are scheduled back on a fault is then taken to enable each facility and load registers. As a result explicitly disabling FPU/VMX/VSX has not been necessary. Future changes and optimisations remove this mandatory giveup and fault which could cause calls such as clone() and fork() to copy threads and run them later with FPU/VMX/VSX enabled but no registers loaded. This patch starts the process of having MSR_{FP,VEC,VSX} mean that a threads registers are hot while not having MSR_{FP,VEC,VSX} means that the registers must be loaded. This allows for a smarter return to userspace. Signed-off-by: NCyril Bur <cyrilbur@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-