- 03 4月, 2012 24 次提交
-
-
由 Chris Metcalf 提交于
This allows the later-panicking tiles to wait in a lower power state until they get interrupted with an smp_send_stop(). Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
This avoids the hardware istream prefetcher doing unnecessary work. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
This is more standard and avoids having to remember what units the options actually take. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
We should be holding the init_mm.page_table_lock in shatter_huge_page() since we are modifying the kernel page tables. Then, only if we are walking the other root page tables to update them, do we want to take the pgd_lock. Add a comment about taking the pgd_lock that we always do it with interrupts disabled and therefore are not at risk from the tlbflush IPI deadlock as is seen on x86. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
We were failing to track the memory when we allocated it. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
We were carefully computing a value to use for the number of loops to spin for, and then ignoring it. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Previously we only handled kernels up to a single huge page in size. Now we create additional PTEs appropriately. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
If we took a page fault while we had interrupts disabled, we shouldn't enable them in the page fault handler. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
We make sure not to try to set the home for an MMIO PTE (on tilegx) or a PTE that isn't referencing memory managed by Linux. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Doing so raises the possibility of self-deadlock if we are waiting for a backtrace for an oprofile or perf interrupt while we are in the middle of migrating our own stack page. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Not associated with any code changes, so I'm just lumping these comment changes into a commit by themselves. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
We now respond to MEM_ERROR traps (e.g. an atomic instruction to non-cacheable memory) with a SIGBUS. We also no longer generate a console crash message if a user process die due to a SIGTRAP. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
In certain circumstances we need to do a bunch of jump-and-link instructions to fill the hardware return-address stack with nonzero values. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Fix a long-standing bug in the stack backtracer where we would print garbage to the console instead of kernel function names, if the kernel wasn't built with symbol support (e.g. mboot). Make sure to tag every line of userspace backtrace output if we actually have the mmap_sem, since that way if there's no tag, we know that it's because we couldn't trylock the semaphore. Stop doing a TLB flush and examining page tables during backtrace. Instead, just trust that __copy_from_user_inatomic() will properly fault and return a failure, which it should do in all cases. Fix a latent bug where the backtracer would directly examine a signal context in user space, rather than copying it safely to kernel memory first. This meant that a race with another thread could potentially have caused a kernel panic. Guard against unaligned sp when trying to restart backtrace at an interrupt or signal handler point in the kernel backtracer. Report kernel symbolic information for the call instruction rather than for the following instruction. We still report the actual numeric address corresponding to the instruction after the call, for the sake of consistency with the normal expectations for stack backtracers. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Add a comment explaining why this is important, and add a CFLAGS_REMOVE clause to the Makefile to make sure it happens. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
With lockstat we can end up trying to get a backtrace before "high_memory" is initialized, so don't worry about range testing if it is zero. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
This avoids assigning IRQ 0 to PCI devices, because we've seen that doesn't always work well. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Fix some signedness and variable usage warnings in change_bit() and test_and_change_bit(). Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
It still returns whether @v was not @u, not the old value, unlike __atomic_add_unless(). Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Acked-by: NArun Sharma <asharma@fb.com>
-
由 Chris Metcalf 提交于
We aren't yet using this definition in the kernel, but fix it up before someone goes looking for it. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
It's fixed at half the VA space and there's no point in configuring it. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
We switched to using "tilepro" for the 32-bit stuff a while ago, but missed this one usage. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Looks like a cut and paste bug from the x86 version. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
- 02 4月, 2012 1 次提交
-
-
由 Paul Gortmaker 提交于
Commit bd119c69 "Disintegrate asm/system.h for Tile" created the asm/switch_to.h file, but did not add an include of it to all its users. Also, commit b4816afa "Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h" introduced the concept of asm/cmpxchg.h but the tile arch never got one. Fork the cmpxchg content out of the asm/atomic.h file to create one. Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
- 01 4月, 2012 15 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console由 Linus Torvalds 提交于
Pull virtio S3 support patches from Amit Shah: "Turns out S3 is not different from S4 for virtio devices: the device is assumed to be reset, so the host and guest state are to be assumed to be out of sync upon resume. We handle the S4 case with exactly the same scenario, so just point the suspend/resume routines to the freeze/restore ones. Once that is done, we also use the PM API's macro to initialise the sleep functions. A couple of cleanups are included: there's no need for special thaw processing in the balloon driver, so that's addressed in patches 1 and 2. Testing: both S3 and S4 support have been tested using these patches using a similar method used earlier during S4 patch development: a guest is started with virtio-blk as the only disk, a virtio network card, a virtio-serial port and a virtio balloon device. Ping from guest to host, dd /dev/zero to a file on the disk, and IO from the host on the virtio-serial port, all at once, while exercising S4 and S3 (separately) were tested. They all continue to work fine after resume. virtio balloon values too were tested by inflating and deflating the balloon." Pulling from Amit, since Rusty is off getting married (and presumably shaving people). * 's3-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console: virtio-pci: switch to PM ops macro to initialise PM functions virtio-pci: S3 support virtio-pci: drop restore_common() virtio: drop thaw PM operation virtio: balloon: Allow stats update after restore from S4
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull second try at vfs part d#2 from Al Viro: "Miklos' first series (with do_lookup() rewrite split into edible chunks) + assorted bits and pieces. The 'untangling of do_lookup()' series is is a splitup of what used to be a monolithic patch from Miklos, so this series is basically "how do I convince myself that his patch is correct (or find a hole in it)". No holes found and I like the resulting cleanup, so in it went..." Changes from try 1: Fix a boot problem with selinux, and commit messages prettied up a bit. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits) vfs: fix out-of-date dentry_unhash() comment vfs: split __lookup_hash untangling do_lookup() - take __lookup_hash()-calling case out of line. untangling do_lookup() - switch to calling __lookup_hash() untangling do_lookup() - merge d_alloc_and_lookup() callers untangling do_lookup() - merge failure exits in !dentry case untangling do_lookup() - massage !dentry case towards __lookup_hash() untangling do_lookup() - get rid of need_reval in !dentry case untangling do_lookup() - eliminate a loop. untangling do_lookup() - expand the area under ->i_mutex untangling do_lookup() - isolate !dentry stuff from the rest of it. vfs: move MAY_EXEC check from __lookup_hash() vfs: don't revalidate just looked up dentry vfs: fix d_need_lookup/d_revalidate order in do_lookup ext3: move headers to fs/ext3/ migrate ext2_fs.h guts to fs/ext2/ext2.h new helper: ext2_image_size() get rid of pointless includes of ext2_fs.h ext2: No longer export ext2_fs.h to user space mtdchar: kill persistently held vfsmount ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar. * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix incorrect usage of for_each_cpu_mask() in select_fallback_rq() sched: Fix __schedule_bug() output when called from an interrupt sched/arch: Introduce the finish_arch_post_lock_switch() scheduler callback
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates and fixes from Ingo Molnar: "It's mostly fixes, but there's also two late items: - preliminary GTK GUI support for perf report - PMU raw event format descriptors in sysfs, to be parsed by tooling The raw event format in sysfs is a new ABI. For example for the 'CPU' PMU we have: aldebaran:~> ll /sys/bus/event_source/devices/cpu/format/* -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/any -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/cmask -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/edge -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/event -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/inv -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/offcore_rsp -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/pc -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/umask those lists of fields contain a specific format: aldebaran:~> cat /sys/bus/event_source/devices/cpu/format/offcore_rsp config1:0-63 So, those who wish to specify raw events can now use the following event format: -e cpu/cmask=1,event=2,umask=3 Most people will not want to specify any events (let alone raw events), they'll just use whatever default event the tools use. But for more obscure PMU events that have no cross-architecture generic events the above syntax is more usable and a bit more structured than specifying hex numbers." * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) perf tools: Remove auto-generated bison/flex files perf annotate: Fix off by one symbol hist size allocation and hit accounting perf tools: Add missing ref-cycles event back to event parser perf annotate: addr2line wants addresses in same format as objdump perf probe: Finder fails to resolve function name to address tracing: Fix ent_size in trace output perf symbols: Handle NULL dso in dso__name_len perf symbols: Do not include libgen.h perf tools: Fix bug in raw sample parsing perf tools: Fix display of first level of callchains perf tools: Switch module.h into export.h perf: Move mmap page data_head offset assertion out of header perf: Fix mmap_page capabilities and docs perf diff: Fix to work with new hists design perf tools: Fix modifier to be applied on correct events perf tools: Fix various casting issues for 32 bits perf tools: Simplify event_read_id exit path tracing: Fix ftrace stack trace entries tracing: Move the tracing_on/off() declarations into CONFIG_TRACING perf report: Add a simple GTK2-based 'perf report' browser ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6由 Linus Torvalds 提交于
Pull PARISC misc updates from James Bottomley: "This is a couple of minor updates (fixing lws futex locking and removing some obsolete cpu_*_map calls)." * tag 'parisc-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] remove references to cpu_*_map. [PARISC] futex: Use same lock set as lws calls
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6由 Linus Torvalds 提交于
Pull SCSI updates from James Bottomley: "This is primarily another round of driver updates (lpfc, bfa, fcoe, ipr) plus a new ufshcd driver. There shouldn't be anything controversial in here (The final deletion of scsi proc_ops which caused some build breakage has been held over until the next merge window to give us more time to stabilise it). I'm afraid, with me moving continents at exactly the wrong time, anything submitted after the merge window opened has been held over to the next merge window." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits) [SCSI] ipr: Driver version 2.5.3 [SCSI] ipr: Increase alignment boundary of command blocks [SCSI] ipr: Increase max concurrent oustanding commands [SCSI] ipr: Remove unnecessary memory barriers [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters [SCSI] ipr: Fix target id allocation re-use problem [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up [SCSI] bfa: Update the driver version to 3.0.23.0 [SCSI] bfa: BSG and User interface fixes. [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario. [SCSI] bfa: Move service parameter programming logic into firmware. [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation. [SCSI] bfa: Flash controller IOC pll init fixes. [SCSI] bfa: Serialize the IOC hw semaphore unlock logic. [SCSI] bfa: Modify ISR to process pending completions [SCSI] bfa: Add fc host issue lip support [SCSI] mpt2sas: remove extraneous sas_log_info messages [SCSI] libfc: fcoe_transport_create fails in single-CPU environment [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2] ...
-
由 J. Bruce Fields 提交于
64252c75 "vfs: remove dget() from dentry_unhash()" changed the implementation but not the comment. Cc: Sage Weil <sage@newdream.net> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
Split __lookup_hash into two component functions: lookup_dcache - tries cached lookup, returns whether real lookup is needed lookup_real - calls i_op->lookup This eliminates code duplication between d_alloc_and_lookup() and d_inode_lookup(). Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
now we have __lookup_hash() open-coded if !dentry case; just call the damn thing instead... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Reorder if-else cases for starters... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Everything arriving into if (!dentry) will have need_reval = 1. Indeed, the only way to get there with need_reval reset to 0 would be via if (unlikely(d_need_lookup(dentry))) goto unlazy; if (unlikely(dentry->d_flags & DCACHE_OP_REVALIDATE)) { status = d_revalidate(dentry, nd); if (unlikely(status <= 0)) { if (status != -ECHILD) need_reval = 0; goto unlazy; ... unlazy: /* no assignments to dentry */ if (dentry && unlikely(d_need_lookup(dentry))) { dput(dentry); dentry = NULL; } and if d_need_lookup() had already been false the first time around, it will remain false on the second call as well. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-