- 21 1月, 2010 1 次提交
-
-
由 Peter Zijlstra 提交于
Anton reported that perf record kept receiving events even after calling ioctl(PERF_EVENT_IOC_DISABLE). It turns out that FORK,COMM and MMAP events didn't respect the disabled state and kept flowing in. Reported-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: NAnton Blanchard <anton@samba.org> LKML-Reference: <1263459187.4244.265.camel@laptop> CC: stable@kernel.org Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 31 12月, 2009 1 次提交
-
-
由 Peter Zijlstra 提交于
Liming found a NULL deref when a task has a perf context but no counters when it forks. This can occur in two cases, a race during construction where the fork hits after installing the context but before the first counter gets inserted, or more reproducably, a fork after the last counter is closed (which leaves the context around). Reported-by: NWang Liming <liming.wang@windriver.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> CC: <stable@kernel.org> LKML-Reference: <1262185684.7135.222.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 23 12月, 2009 1 次提交
-
-
由 Roland Dreier 提交于
It seems a couple places such as arch/ia64/kernel/perfmon.c and drivers/infiniband/core/uverbs_main.c could use anon_inode_getfile() instead of a private pseudo-fs + alloc_file(), if only there were a way to get a read-only file. So provide this by having anon_inode_getfile() create a read-only file if we pass O_RDONLY in flags. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 17 12月, 2009 3 次提交
-
-
由 Peter Zijlstra 提交于
Acme noticed that his FORK/MMAP numbers were inflated by about the same factor as his cpu-count. This led to the discovery of a few more sites that need to respect the event->cpu filter. Reported-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091217121830.215333434@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Rusty Russell 提交于
Also, we want to check against nr_cpu_ids, not num_possible_cpus(). The latter works, but the correct bounds check is < nr_cpu_ids. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> To: Thomas Gleixner <tglx@linutronix.de>
-
由 Peter Zijlstra 提交于
In order to allow for per-task-per-cpu counters, useful for scalability when profiling task hierarchies, we allow installing events with event->cpu != -1 in task contexts. __perf_event_sched_in() already skips events where ->cpu mis-matches the current cpu, fix up __perf_install_in_context() and __perf_event_enable() to also respect this filter. This does lead to vary hard to interpret enabled/running times for such counters, but I don't see a simple solution for that. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: fweisbec@gmail.com Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091216165904.831451147@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 12月, 2009 1 次提交
-
-
由 Peter Zijlstra 提交于
The miss-alignment of bp_addr created a 32bit hole, causing different structure packings on 32 and 64 bit machines. Fix that by moving __reserve_2 into that hole. Further, remove the useless struct and redundant __bp_reserve muck. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1260902591.8023.781.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 12月, 2009 2 次提交
-
-
由 Paul Mackerras 提交于
It is quite legitimate for CPUs to be numbered sparsely, meaning that it possible for an online CPU to have a number which is greater than the total count of possible CPUs. Currently find_get_context() has a sanity check on the cpu number where it checks it against num_possible_cpus(). This test can fail for a legitimate cpu number if the cpu_possible_mask is sparsely populated. This fixes the problem by checking the CPU number against nr_cpumask_bits instead, since that is the appropriate check to ensure that the cpu number is same to pass to cpu_isset() subsequently. Reported-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NPaul Mackerras <paulus@samba.org> Tested-by: NMichael Neuling <mikey@neuling.org> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: <stable@kernel.org> LKML-Reference: <20091215084032.GA18661@brick.ozlabs.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Convert locks which cannot be sleeping locks in preempt-rt to raw_spinlocks. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NIngo Molnar <mingo@elte.hu>
-
- 11 12月, 2009 1 次提交
-
-
由 Xiao Guangrong 提交于
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B20BAA6.7010609@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 12月, 2009 1 次提交
-
-
由 Xiao Guangrong 提交于
fix: [<c0477471>] ? printk+0x1d/0x24 [<c01c98f9>] ? perf_prepare_sample+0x269/0x280 [<c0149231>] warn_slowpath_common+0x71/0xd0 [<c01c98f9>] ? perf_prepare_sample+0x269/0x280 [<c01492aa>] warn_slowpath_null+0x1a/0x20 [<c01c98f9>] perf_prepare_sample+0x269/0x280 [<c016e9f3>] ? cpu_clock+0x53/0x90 [<c01cc368>] __perf_event_overflow+0x2a8/0x300 [<c01ccc3b>] perf_event_overflow+0x1b/0x30 [<c01ccccf>] perf_swevent_hrtimer+0x7f/0x120 This is because 'data.raw' variable not initialize. Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B208E93.1010801@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 09 12月, 2009 4 次提交
-
-
由 Xiao Guangrong 提交于
Using atomic64_xchg() instead of atomic64_read() and atomic64_set(). Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Reviewed-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B1F19DC.90204@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Xiao Guangrong 提交于
In current code, children task will allocate memory for 'child->perf_event_ctxp' if the parent is counted, we can do it only if the parent allowed children inherit it. It can save memory and reduce overhead. Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Reviewed-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B1F19A8.5040805@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Xiao Guangrong 提交于
Clean up the code a bit: - define 'perf_cpu_context' variable with 'static' - use kzalloc() instead of kmalloc() and memset() Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Reviewed-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B1F194D.7080306@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
Currently, when ptrace needs to modify a breakpoint, like disabling it, changing its address, type or len, it calls modify_user_hw_breakpoint(). This latter will perform the heavy and racy task of unregistering the old breakpoint and registering a new one. This is racy as someone else might steal the reserved breakpoint slot under us, which is undesired as the breakpoint is only supposed to be modified, sometimes in the middle of a debugging workflow. We don't want our slot to be stolen in the middle. So instead of unregistering/registering the breakpoint, just disable it while we modify its breakpoint fields and re-enable it after if necessary. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1260347148-5519-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 06 12月, 2009 1 次提交
-
-
由 Frederic Weisbecker 提交于
struct perf_event::event callback was called when a breakpoint triggers. But this is a rather opaque callback, pretty tied-only to the breakpoint API and not really integrated into perf as it triggers even when we don't overflow. We prefer to use overflow_handler() as it fits into the perf events rules, being called only when we overflow. Reported-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
-
- 04 12月, 2009 1 次提交
-
-
由 André Goddard Rosa 提交于
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 02 12月, 2009 1 次提交
-
-
由 Kristian Høgsberg 提交于
In the CONFIG_PERF_USE_VMALLOC case, perf_mmap_data_free() only schedules the cleanup of the perf_mmap_data struct. In that case we have to wait until the work has been done before we free data. Signed-off-by: NKristian Høgsberg <krh@bitplanet.net> Cc: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org> LKML-Reference: <1259697901-1747-1-git-send-email-krh@bitplanet.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 01 12月, 2009 1 次提交
-
-
由 Xiao Guangrong 提交于
In current code in perf_swevent_hrtimer(), data.period is not initialized, The result is obvious wrong: # ./perf record -f -e cpu-clock make # ./perf report # Samples: 1740 # # Overhead Command ...... # ........ ........ .......................................... # 1025422183050275328.00% sh libc-2.9.90.so ... 1025422183050275328.00% perl libperl.so ... 1025422168240043264.00% perl [kernel] ... 1025422030011210752.00% perl [kernel] ... Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org> LKML-Reference: <4B14E220.2050107@cn.fujitsu.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 11月, 2009 1 次提交
-
-
由 Stephane Eranian 提交于
When a pinned group cannot be scheduled it goes into error state. Normally a group cannot go out of error state without being explicitly re-enabled or disabled. There was a bug in per-thread mode, whereby upon termination of the thread, the group would transition from error to off leading to bogus counts and timing information returned by read(). Fix it by clearing the error state. Signed-off-by: NStephane Eranian <eranian@google.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: perfmon2-devel@lists.sourceforge.net LKML-Reference: <4b0eb9ce.0508d00a.573b.ffffeab6@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 26 11月, 2009 2 次提交
-
-
由 Frederic Weisbecker 提交于
bp_perf_event_destroy() is unused in its off-case version, let's remove it to fix the following warning reported by Stephen Rothwell in linux-next: kernel/perf_event.c:4306: warning: 'bp_perf_event_destroy' defined but not used Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1259180453-5813-1-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
In fail case, perf_event_create_kernel_counter() returns NULL instead of an error, which doesn't help us to inform the user about the origin of the problem from the outer most callers. Often we can just return -EINVAL, which doesn't help anyone when it's eventually about a memory allocation failure. Then, this patch makes perf_event_create_kernel_counter() always return a detailed error code. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1259210142-5714-2-git-send-regression-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 11月, 2009 1 次提交
-
-
由 Frederic Weisbecker 提交于
Commit 4ed7c92d (perf_events: Undo some recursion damage) has introduced a bad reference counting of the recursion context. putting the context behaves like getting it, dropping every software/trace events after the first one in a context. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1259091502-5171-1-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 24 11月, 2009 2 次提交
-
-
由 Stephane Eranian 提交于
When using an event group, the value and id for non leaders events were wrong due to invalid offset into the outgoing buffer. Signed-off-by: NStephane Eranian <eranian@google.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: paulus@samba.org Cc: perfmon2-devel@lists.sourceforge.net LKML-Reference: <4b0b71e1.0508d00a.075e.ffff84a3@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
Add the remaining necessary bits to support breakpoints created through perf syscall. We don't use the software counter interface as: - We don't need to check against recursion, this is already done in hardware breakpoints arch level. - We already know the perf event we are dealing with when the event is to be committed. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1258987355-8751-3-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 23 11月, 2009 8 次提交
-
-
由 Peter Zijlstra 提交于
It is quite possible to call update_event_times() on a context that isn't actually running and thereby confuse the thing. perf stat was reporting !100% scale values for software counters (2e2af50b perf_events: Disable events when we detach them, solved the worst of that, but there was still some left). The thing that happens is that because we are not self-reaping (we have a caring parent) there is a time between the last schedule (out) and having do_exit() called which will detach the events. This period would be accounted as enabled,!running because the event->state==INACTIVE, even though !event->ctx->is_active. Similar issues could have been observed by calling read() on a event while the attached task was not scheduled in. Solve this by teaching update_event_times() about ctx->is_active. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1258984836.4531.480.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Make perf_swevent_get_recursion_context return a context number and disable preemption. This could be used to remove the IRQ disable from the trace bit and index the per-cpu buffer with. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091123103819.993226816@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Move the update_event_times() call in __perf_event_exit_task() into list_del_event() because that holds the proper lock (ctx->lock) and seems a more natural place to do the last time update. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091123103819.842455480@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
It appeared we did call update_event_times() on exit, but we failed to update the context time, which renders the former moot. Locking is a bit iffy, we call update_event_times under ctx->mutex instead of ctx->lock - the next patch fixes this. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091123103819.764207355@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
If we leave the event in STATE_INACTIVE, any read of the event after the detach will increase the running count but not the enabled count and cause funny scaling artefacts. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091123103819.689055515@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091123103819.613427378@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
We had two almost identical functions, avoid the duplication. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091123103819.537537928@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
The structure init creates a bit memcpy, which shows up big time in perf annotate output: : ffffffff810a859d <__perf_sw_event>: 1.68 : ffffffff810a859d: 55 push %rbp 1.69 : ffffffff810a859e: 41 89 fa mov %edi,%r10d 0.01 : ffffffff810a85a1: 49 89 c9 mov %rcx,%r9 0.00 : ffffffff810a85a4: 31 c0 xor %eax,%eax 1.71 : ffffffff810a85a6: b9 16 00 00 00 mov $0x16,%ecx 0.00 : ffffffff810a85ab: 48 89 e5 mov %rsp,%rbp 0.00 : ffffffff810a85ae: 48 83 ec 60 sub $0x60,%rsp 1.52 : ffffffff810a85b2: 48 8d 7d a0 lea -0x60(%rbp),%rdi 85.20 : ffffffff810a85b6: f3 ab rep stos %eax,%es:(%rdi) None of the callees depends on the structure being pre-initialized, so only initialize ->addr. This gets rid of the memcpy overhead. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 11月, 2009 3 次提交
-
-
由 Ingo Molnar 提交于
Fix: ERROR: "perf_swevent_put_recursion_context" [fs/ext4/ext4.ko] undefined! ERROR: "perf_swevent_get_recursion_context" [fs/ext4/ext4.ko] undefined! Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Márton Németh 提交于
The buffer is first zeroed out by memset(). Then strncpy() is used to fill the content. The strncpy() function also pads the string till the end of the specified length, which is redundant. The strncpy() does not ensures that the string will be properly closed with 0. Use strlcpy() instead. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression buffer; expression size; expression str; @@ memset(buffer, 0, size); ... - strncpy( + strlcpy( buffer, str, sizeof(buffer) ); @@ expression buffer; expression size; expression str; @@ memset(&buffer, 0, size); ... - strncpy( + strlcpy( &buffer, str, sizeof(buffer)); @@ expression buffer; identifier field; expression size; expression str; @@ memset(buffer, 0, size); ... - strncpy( + strlcpy( buffer->field, str, sizeof(buffer->field) ); @@ expression buffer; identifier field; expression size; expression str; @@ memset(&buffer, 0, size); ... - strncpy( + strlcpy( buffer.field, str, sizeof(buffer.field)); // </smpl> On strncpy() vs strlcpy() see http://www.gratisoft.us/todd/papers/strlcpy.html . Signed-off-by: NMárton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <4B086547.5040100@freemail.hu> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
When we commit a trace to perf, we first check if we are recursing in the same buffer so that we don't mess-up the buffer with a recursing trace. But later on, we do the same check from perf to avoid commit recursion. The recursion check is desired early before we touch the buffer but we want to do this check only once. Then export the recursion protection from perf and use it from the trace events before submitting a trace. v2: Put appropriate Reported-by tag Reported-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Jason Baron <jbaron@redhat.com> LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 11月, 2009 4 次提交
-
-
由 Stephane Eranian 提交于
This patch fixes the default watermark value for the sampling buffer. With the existing calculation (watermark = max(PAGE_SIZE, max_size / 2)), no notification was ever received when the buffer was exactly 1 page. This was because you would never cross the threshold (there is no partial samples). In certain configuration, there was no possibilty detecting the problem because there was not enough space left to store the LOST record.In fact, there may be a more generic problem here. The kernel should ensure that there is alaways enough space to store one LOST record. This patch sets the default watermark to half the buffer size. With such limit, we are guaranteed to get a notification even with a single page buffer assuming no sample is bigger than a page. Signed-off-by: NStephane Eranian <eranian@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.344964101@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu> LKML-Reference: <1256302576-6169-1-git-send-email-eranian@gmail.com>
-
由 Peter Zijlstra 提交于
We should hold event->child_mutex when iterating the inherited counters, we should hold ctx->mutex when iterating siblings. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.251030114@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Properly account the full hierarchy of counters for both the count (we already did so) and the scale times (new). Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.153379276@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Most sites updating ctx->time and event times do so under ctx->lock, make sure they all do. This was made possible by removing the __perf_event_read() call from __perf_event_sync_stat(), which already had this lock taken. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091120212509.102316434@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-