Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

PGALLOC_DMA is defined only if we have CONFIG_ZONE_DMA
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

used by ->attach() in pcmcia analog
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

have it return the buffer it had allocated
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

GFP_KERNEL allocations in non-blocking context; fixed by killing
an idiotic use of security_getprocattr().
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Add missing HPAGE_MASK masks on address parameters.
  [SPARC]: Hook up missing syscalls.

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] kspd: ioctl needs a translation entry.
  [MIPS] Viper2: Remove defective support.
  [MIPS] Oprofile: Reset all performance registers for MIPS_MT_SMP configs

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

A defconfig file and the 10 lines of code (including comments ...) that
are rotting since lmo commit 6516a42dc8b40c6c00010346dd51496125b16644
don't quite make proper support, so let's trash it.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These pte loops all assume the passed in address is HPAGE
aligned, make sure that is actually true.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sys_mbind
sys_get_mempolicy
sys_set_mempolicy
sys_kexec_load
sys_move_pages
sys_getcpu
sys_epoll_pwait

This work is largely a result of David Woodhouse's most
excellent missing syscalls patch.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] sys_move_pages should be callable from an SPU
  [POWERPC] Wire up sys_epoll_pwait
  [POWERPC] Allocate syscall number for sys_getcpu
  [POWERPC] update cell_defconfig
  [POWERPC] ps3: always make sure were running on a PS3
  [POWERPC] Fix spu SLB invalidations
  [POWERPC] avoid SPU_ACTIVATE_NOWAKE optimization
  [POWERPC] spufs: fix possible memory corruption is spufs_mem_write

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC]: Fix TIF_USEDFPU flag atomicity
  [SPARC64]: Fix atomicity of TIF update in flush_thread()
  [BW2]: Fix section mismatch warnings.
  [CG14]: Fix section mismatch warnings.
  [SPARC]: We do not need OLD_GETRLIMIT.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [XFRM]: Fix missing protocol comparison of larval SAs.
  [WANROUTER]: Delete superfluous source file "net/wanrouter/af_wanpipe.c".
  [IPV4]: Fix warning in ip_mc_rejoin_group.
  [ROSE]: Socket locking is a great invention.
  [ROSE]: Remove ourselves from waitqueue when receiving a signal
  [NetLabel]: parse the CIPSO ranged tag on incoming packets

I noticed that in xfrm_state_add we look for the larval SA in a few
places without checking for protocol match. So when using both 
AH and ESP, whichever one gets added first, deletes the larval SA. 
It seems AH always gets added first and ESP is always the larval 
SA's protocol since the xfrm->tmpl has it first. Thus causing the
additional km_query()

Adding the check eliminates accidental double SA creation. 
Signed-off-by: NJoy Latten <latten@austin.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Delete the apparently superfluous source file
net/wanrouter/af_wanpipe.c.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kill warning about unused variable `in_dev' when CONFIG_IP_MULTICAST
is not set.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some gcc put this function in .init.text because the header didn't
match.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

VMI is broken under COMPAT_VDSO, as Xen and other non hardware assisted
hypervisors will be.  I have been working on a fix for this which works
for older glibcs that panic when the new relocatable VDSO is used.

However, I believe at this time that the fix is going to be too radical
to consider at this stage in the release of 2.6.21.  We don't expect
this config option to be turned on by vendors for new distributions, so
at this point we are willing to drop support for it when VMI is compiled
in, and work on a patch for 2.6.22 which more fully addresses the
problem.
Signed-off-by: NZachary Amsden <zach@vmware.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Because we do not reserve space for the pci-x and pci-e state in struct
pci dev we need to dynamically allocate it.  However because we need
to support restore being called multiple times after a single save
it is never safe to free the buffers we have allocated to hold the
state.

So this patch modifies the save routines to first check to see
if we have already allocated a state buffer before allocating
a new one.  Then the restore routines are modified to not free
the state after restoring it.  Simple and it fixes some subtle
error path handling bugs, that are hard to test for.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are two ways pci_save_state and pci_restore_state are used.  As
helper functions during suspend/resume, and as helper functions around
a hardware reset event.  When used as helper functions around a hardware
reset event there is no reason to believe the calls will be paired, nor
is there a good reason to believe that if we restore the msi state from
before the reset that it will match the current msi state.  Since arch
code may change the msi message without going through the driver, drivers
currently do not have enough information to even know when to call
pci_save_state to ensure they will have msi state in sync with the other
kernel irq reception data structures.

It turns out the solution is straight forward, cache the state in the
existing msi data structures (not the magic pci saved things) and
have the msi code update the cached state each time we write to the hardware.
This means we never need to read the hardware to figure out what the hardware
state should be.

By modifying the caching in this manner we get to remove our save_state
routines and only need to provide restore_state routines.

The only fields that were at all tricky to regenerate were the msi and msi-x
control registers and the way we regenerate them currently is a bit dependent
upon assumptions on how we use the allow msi registers to be configured and used
making the code a little bit brittle.  If we ever change what cases we allow
or how we configure the msi bits we can address the fragility then.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Especially if you actually try to do it ;-)
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 484b3669 added support for the CIPSO
ranged categories tag.  However, it appears that I made a mistake when rebasing
then patch to the latest upstream sources for submission and dropped the part
of the patch that actually parses the tag on incoming packets.  This patch
fixes this mistake by adding the required function call to the
cipso_v4_skbuff_getattr() function.

I've run this patch over the weekend and have not noticed any problems.
Signed-off-by: NPaul Moore <paul.moore@hp.com>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4263/1: fix IXP4XX_NPE[ABC]_BASE_VIRT address
  [ARM] 4256/1: i.MX/MX1 SDHC fix/workaround of SD card recognition problems
  [ARM] 4255/1: i.MX/MX1 Correct MPU PLL reference clock value.
  [ARM] 4254/1: i.MX/MX1 CPU Frequency scaling honor boot loader set BCLK_DIV.
  [ARM] 4251/1: Fix sharpsl_pm dependency
  [ARM] 4250/1: Fix locomo backlight conversion error/compile failure
  [ARM] 4249/1: Fix tosa compile failure
  [ARM] 4248/1: lh7a40x: fix missing definitions for get_irqnr_preamble
  [ARM] 4247/1: Fix long name for cc9p9360dev
  ARM: OMAP: Fix OMAP2 dss2 so clk_set_parent works
  ARM: OMAP: Fix missing workqueue include in board-h2.c
  ARM: OMAP: Include missing header

This fixs address defines for IXP4XX_NPE[ABC]_BASE_VIRT.
They are defined as (IXP4XX_PERIPHERAL_BASE_PHYS + 0x[678]000) now,
but they should be defined as (IXP4XX_PERIPHERAL_BASE_VIRT + 0x[678]000). Note PHYS vs VIRT in IXP4XX_PERIPHERAL_BASE...
Signed-off-by: NMilan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The SDHC controllers cannot process shorter transfers.
They has to be handled as longer ones, but it such case CRC
error is evaluated. There was a case in the code still,
where this error is not ignored as it should to be process
these transfers.
Signed-off-by: NPavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Only System PLL clock source is selectable by CSCR_SYSTEM_SEL
bit. MPU PLL is driven by 512*CLK32 for each case.
Signed-off-by: NPavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The minimal bus clock prescaler should be kept at value
selected by the board / boot loader designer.
Switching frequency above startup limit could
lead to the external memory/devices misbehave.
Signed-off-by: NPavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

I forgot to do this when wiring up the syscall.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This reverts commit d2487cb4.

Russell King points out that it's obviously bogus, and I have to agree.
Not only does "irq" not even exist in that scope, but we obviously need
to free the irq that we actually requested, and that's IRQ_USB.
Reported-by: NRussell King <rmk@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: David Brownell <david-b@pacbell.net>,
Cc: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix atomicity of TIF update in flush_thread() for sparc64

Fixes correctly the race by using *_ti_thread_flag.

Race :

parent process executing :
sys_ptrace()
 (lock_kernel())
 (ptrace_get_task_struct(pid))
 arch_ptrace()
   ptrace_detach()
     ptrace_disable(child);
       clear_singlestep(child);
         clear_tsk_thread_flag(child, TIF_SINGLESTEP);
         (which clears the TIF_SINGLESTEP flag atomically from a different
          process)
 (put_task_struct(child))
 (unlock_kernel())

And at the same time, in the child process :
sys_execve()
 do_execve()
   search_binary_handler()
     load_elf_binary()
       flush_old_exec()
         flush_thread()
           doing a non-atomic thread flag update
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix section mismatch warnings by moving data into __devinitdata section.
Add __devinit to two initialization functions.
Signed-off-by: NRobert Reif <reif@earthlink.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix section mismatch warning by moving data into __devinitdata section.
Add __devinit to an initialization function.
Signed-off-by: NRobert Reif <reif@earthlink.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>