- 17 3月, 2017 28 次提交
-
-
由 David Howells 提交于
Drop the page lock before waiting for page writeback. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
The ->writepage() op shouldn't call clear_page_dirty_for_io() as that has already been called by the caller. Fix afs_writepage() by moving the call out of afs_write_back_from_locked_page() to afs_writepages_region() where it is needed. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Fix the way in which a call that's in progress and being waited for is aborted in the case that EINTR is detected. We should be sending RX_USER_ABORT rather than RX_CALL_DEAD as the abort code. Note that since the only two ways out of the loop are if the call completes or if a signal happens, the kill-the-call clause after the loop has finished can only happen in the case of EINTR. This means that we only have one abort case to deal with, not two, and the "KWC" case can never happen and so can be deleted. Note further that simply aborting the call isn't necessarily the best thing here since at this point: the request has been entirely sent and it's likely the server will do the operation anyway - whether we abort it or not. In future, we should punt the handling of the remainder of the call off to a background thread. Reported-by: NMarc Dionne <marc.c.dionne@auristor.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
afs_send_pages() should only put the call into the AFS_CALL_AWAIT_REPLY state if it has sent all the pages - but the check it makes is incorrect and sometimes it will finish the loop early. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Fix afs_kill_pages() in two ways: (1) If a writeback has been partially flushed, then if we try and kill the pages it contains, some of them may no longer be undergoing writeback and end_page_writeback() will assert. Fix this by checking to see whether the page in question is actually undergoing writeback before ending that writeback. (2) The loop that scans for pages to kill doesn't increase the first page index, and so the loop may not terminate, but it will try to process the same pages over and over again. Fix this by increasing the first page index to one after the last page we processed. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
afs_write_begin() leaks a ref and a lock on a page if afs_fill_page() fails. Fix the leak by unlocking and releasing the page in the error path. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Don't set PG_error on a page if we get local EINTR or ENOMEM when filling a page for writing. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Marc Dionne 提交于
The inode timestamps should be set from the client time in the status received from the server, rather than the server time which is meant for internal server use. Set AFS_SET_MTIME and populate the mtime for operations that take an input status, such as file/dir creation and StoreData. If an input time is not provided the server will set the vnode times based on the current server time. In a situation where the server has some skew with the client, this could lead to the client seeing a timestamp in the future for a file that it just created or wrote. Signed-off-by: NMarc Dionne <marc.dionne@auristor.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
If we receive a network error, a remote abort or a protocol error whilst we're still transmitting data, make sure we return an appropriate error to the caller rather than ESHUTDOWN or ECONNABORTED. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
When we are given an invalid operation ID, we should abort that with RXGEN_OPCODE rather than RX_INVALID_OPERATION. Also map RXGEN_OPCODE to -ENOTSUPP. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
afs_fs_store_data() works out of the size of the write it's going to make, but it uses 32-bit unsigned subtraction in one place that gets automatically cast to loff_t. However, if to < offset, then the number goes negative, but as the result isn't signed, this doesn't get sign-extended to 64-bits when placed in a loff_t. Fix by casting the operands to loff_t. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Use a bvec rather than a kvec in afs_send_pages() as we don't then have to call kmap() in advance. This allows us to pass the array of contiguous pages that we extracted through to rxrpc in one go rather than passing a single page at a time. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Make struct afs_read::remain 64-bit so that it can handle huge transfers if we ever request them or the server decides to give us a bit extra data (the other fields there are already 64-bit). Signed-off-by: NDavid Howells <dhowells@redhat.com> Tested-by: NMarc Dionne <marc.dionne@auristor.com>
-
由 David Howells 提交于
Fix a bug in AFS read whereby the request page afs_read::index isn't incremented after calling ->page_done() if ->remain reaches 0, indicating that the data read is complete. Without this a NULL pointer exception happens when ->page_done() is called twice for the last page because the page clearing loop will call it also and afs_readpages_page_done() clears the current entry in the page list. BUG: unable to handle kernel NULL pointer dereference at (null) IP: afs_readpages_page_done+0x21/0xa4 [kafs] PGD 0 Oops: 0002 [#1] SMP Modules linked in: kafs(E) CPU: 2 PID: 3002 Comm: md5sum Tainted: G E 4.10.0-fscache #485 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff8804017d86c0 task.stack: ffff8803fc1d8000 RIP: 0010:afs_readpages_page_done+0x21/0xa4 [kafs] RSP: 0018:ffff8803fc1db978 EFLAGS: 00010282 RAX: ffff880405d39af8 RBX: 0000000000000000 RCX: ffff880407d83ed4 RDX: 0000000000000000 RSI: ffff880405d39a00 RDI: ffff880405c6f400 RBP: ffff8803fc1db988 R08: 0000000000000000 R09: 0000000000000001 R10: ffff8803fc1db820 R11: ffff88040cf56000 R12: ffff8804088f1780 R13: ffff8804017d86c0 R14: ffff8804088f1780 R15: 0000000000003840 FS: 00007f8154469700(0000) GS:ffff88041fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000004016ec000 CR4: 00000000001406e0 Call Trace: afs_deliver_fs_fetch_data+0x5b9/0x60e [kafs] ? afs_make_call+0x316/0x4e8 [kafs] ? afs_make_call+0x359/0x4e8 [kafs] afs_deliver_to_call+0x173/0x2e8 [kafs] ? afs_make_call+0x316/0x4e8 [kafs] afs_make_call+0x37a/0x4e8 [kafs] ? wake_up_q+0x4f/0x4f ? __init_waitqueue_head+0x36/0x49 afs_fs_fetch_data+0x21c/0x227 [kafs] ? afs_fs_fetch_data+0x21c/0x227 [kafs] afs_vnode_fetch_data+0xf3/0x1d2 [kafs] afs_readpages+0x314/0x3fd [kafs] __do_page_cache_readahead+0x208/0x2c5 ondemand_readahead+0x3a2/0x3b7 ? ondemand_readahead+0x3a2/0x3b7 page_cache_async_readahead+0x5e/0x67 generic_file_read_iter+0x23b/0x70c ? __inode_security_revalidate+0x2f/0x62 __vfs_read+0xc4/0xe8 vfs_read+0xd1/0x15a SyS_read+0x4c/0x89 do_syscall_64+0x80/0x191 entry_SYSCALL64_slow_path+0x25/0x25 Reported-by: NMarc Dionne <marc.dionne@auristor.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Tested-by: NMarc Dionne <marc.dionne@auristor.com>
-
由 Tina Ruchandani 提交于
get_seconds() returns real wall-clock seconds. On 32-bit systems this value will overflow in year 2038 and beyond. This patch changes afs_vnode record to use ktime_get_real_seconds() instead, for the fields cb_expires and cb_expires_at. Signed-off-by: NTina Ruchandani <ruchandani.tina@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Tina Ruchandani 提交于
get_seconds() returns real wall-clock seconds. On 32-bit systems this value will overflow in year 2038 and beyond. This patch changes afs's vlocation record to use ktime_get_real_seconds() instead, for the fields time_of_death and update_at. Signed-off-by: NTina Ruchandani <ruchandani.tina@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Andreea-Cristina Bernat 提交于
The use of "rcu_assign_pointer()" is NULLing out the pointer. According to RCU_INIT_POINTER()'s block comment: "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) Signed-off-by: NAndreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Andreea-Cristina Bernat 提交于
The use of "rcu_assign_pointer()" is NULLing out the pointer. According to RCU_INIT_POINTER()'s block comment: "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) Signed-off-by: NAndreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
In AFS, mountpoints appear as symlinks with mode 0644 and normal symlinks have mode 0777, so use this to distinguish them rather than reading the content and parsing it. In the case of a mountpoint, the symlink body is a formatted string indicating the location of the target volume. Note that with this, kAFS no longer 'pre-fetches' the contents of symlinks, so afs_readpage() may fail with an access-denial because when the VFS calls d_automount(), it wraps the call in an credentials override that sets the initial creds - thereby preventing access to the caller's keyrings and the authentication keys held therein. To this end, a patch reverting that change to the VFS is required also. Reported-by: NJeffrey Altman <jaltman@auristor.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Flush outstanding writes in afs when an fd is closed. This is what NFS and CIFS do. Reported-by: NMarc Dionne <marc.c.dionne@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Handle the situation where afs_write_begin() is told to expect that a full-page write will be made, but this doesn't happen (EFAULT, CTRL-C, etc.), and so afs_write_end() sees a partial write took place. Currently, no attempt is to deal with the discrepency. Fix this by loading the gap from the server. Reported-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
Kill struct afs_read::pg_offset as nothing uses it. It's unnecessary as pos can be masked off. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
When an AFS server is given an FS.FetchData{,64} request to read data from a file, it is permitted by the protocol to return more or less than was requested. kafs currently relies on the latter behaviour in readpage{,s} to handle a partial page at the end of the file (we just ask for a whole page and clear space beyond the short read). However, we don't handle all cases. Add: (1) Handle excess data by discarding it rather than aborting. Note that we use a common static buffer to discard into so that the decryption algorithm advances the PCBC state. (2) Handle a short read that affects more than just the last page. Note that if a read comes up unexpectedly short of long, it's possible that the server's copy of the file changed - in which case the data version number will have been incremented and the callback will have been broken - in which case all the pages currently attached to the inode will be zapped anyway at some point. Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Marc Dionne 提交于
Servers may send a callback array that is the same size as the FID array, or an empty array. If the callback count is 0, the code would attempt to read (fid_count * 12) bytes of data, which would fail and result in an unmarshalling error. This would lead to stale data for remotely modified files or directories. Store the callback array size in the internal afs_call structure and use that to determine the amount of data to read. Signed-off-by: NMarc Dionne <marc.dionne@auristor.com>
-
由 Marc Dionne 提交于
Mode bits for an afs file should not be enforced in the usual way. For files, the absence of user bits can restrict file access with respect to what is granted by the server. These bits apply regardless of the owner or the current uid; the rest of the mode bits (group, other) are ignored. Signed-off-by: NMarc Dionne <marc.dionne@auristor.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Marc Dionne 提交于
The group was hard coded to GLOBAL_ROOT_GID; use the group ID that was received from the server. Signed-off-by: NMarc Dionne <marc.dionne@auristor.com> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 David Howells 提交于
afs_fill_page() loads the page it wants to fill into the afs_read request without incrementing its refcount - but then calls afs_put_read() to clean up afterwards, which then releases a ref on the page. Fix this by getting a ref on the page before calling afs_vnode_fetch_data(). This causes sync after a write to hang in afs_writepages_region() because find_get_pages_tag() gets confused and doesn't return. Fixes: 196ee9cd ("afs: Make afs_fs_fetch_data() take a list of pages") Reported-by: NMarc Dionne <marc.dionne@auristor.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Tested-by: NMarc Dionne <marc.dionne@auristor.com>
-
由 David Howells 提交于
In afs_writepages_region(), inside the loop where we find dirty pages to deal with, one of the if-statements is missing a put_page(). Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
- 16 3月, 2017 4 次提交
-
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "Four small fixes for this cycle: - followup fix from Neil for a fix that went in before -rc2, ensuring that we always see the full per-task bio_list. - fix for blk-mq-sched from me that ensures that we retain similar direct-to-issue behavior on running the queue. - fix from Sagi fixing a potential NULL pointer dereference in blk-mq on spurious CPU unplug. - a memory leak fix in writeback from Tahsin, fixing a case where device removal of a mounted device can leak a struct wb_writeback_work" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq-sched: don't run the queue async from blk_mq_try_issue_directly() writeback: fix memory leak in wb_queue_work() blk-mq: Fix tagset reinit in the presence of cpu hot-unplug blk: Ensure users for current->bio_list can see the full list.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This is a rather large set of fixes. The bulk are for lpfc correcting a lot of issues in the new NVME driver code which just went in in the merge window. The others are: - fix a hang in the vmware paravirt driver caused by incorrect handling of the new MSI vector allocation - long standing bug in storvsc, which recent block changes turned from being a harmless annoyance into a hang - yet more fallout (in mpt3sas) from the changes to device blocking The remainder are small fixes and updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits) scsi: lpfc: Add shutdown method for kexec scsi: storvsc: Workaround for virtual DVD SCSI version scsi: lpfc: revise version number to 11.2.0.10 scsi: lpfc: code cleanups in NVME initiator discovery scsi: lpfc: code cleanups in NVME initiator base scsi: lpfc: correct rdp diag portnames scsi: lpfc: remove dead sli3 nvme code scsi: lpfc: correct double print scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT scsi: lpfc: Rework lpfc Kconfig for NVME options scsi: lpfc: add transport eh_timed_out reference scsi: lpfc: Fix eh_deadline setting for sli3 adapters. scsi: lpfc: add NVME exchange aborts scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport scsi: lpfc: Fix IO submission if WQ is full scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem scsi: lpfc: Fix RCTL value on NVME LS request and response scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters scsi: lpfc: fix missing spin_unlock on sql_list_lock scsi: lpfc: don't dereference dma_buf->iocbq before null check ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2由 Linus Torvalds 提交于
Pull gfs2 fix from Bob Peterson: "This is an emergency patch for 4.11-rc3 The GFS2 developers uncovered a really nasty problem that can lead to random corruption and kernel panic, much like the last one. Andreas Gruenbacher wrote a simple one-line patch to fix the problem." * tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Avoid alignment hole in struct lm_lockname
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: - self-test failure of crc32c on powerpc - regressions of ecb(aes) when used with xts/lrw in s5p-sss - a number of bugs in the omap RNG driver * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s5p-sss - Fix spinlock recursion on LRW(AES) hwrng: omap - Do not access INTMASK_REG on EIP76 hwrng: omap - use devm_clk_get() instead of of_clk_get() hwrng: omap - write registers after enabling the clock crypto: s5p-sss - Fix completing crypto request in IRQ handler crypto: powerpc - Fix initialisation of crc32c context
-
- 15 3月, 2017 8 次提交
-
-
由 Andreas Gruenbacher 提交于
Commit 88ffbf3e switches to using rhashtables for glocks, hashing over the entire struct lm_lockname instead of its individual fields. On some architectures, struct lm_lockname contains a hole of uninitialized memory due to alignment rules, which now leads to incorrect hash values. Get rid of that hole. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> CC: <stable@vger.kernel.org> #v4.3+
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver, from Steffen Klassert. 2) Fix crashes when user tries to get_next_key on an LPM bpf map, from Alexei Starovoitov. 3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from Michal Schmidt. 4) We can get a divide by zero when TCP socket are morphed into listening state, fix from Eric Dumazet. 5) Fix socket refcounting bugs in skb_complete_wifi_ack() and skb_complete_tx_timestamp(). From Eric Dumazet. 6) Use after free in dccp_feat_activate_values(), also from Eric Dumazet. 7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from Jarod Wilson. 8) Fix use after free in vrf_xmit(), from David Ahern. 9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from Alexey Kodanev. 10) Properly check napi_complete_done() return value in order to decide whether to re-enable IRQs or not in amd-xgbe driver, from Thomas Lendacky. 11) Fix double free of hwmon device in marvell phy driver, from Andrew Lunn. 12) Don't crash on malformed netlink attributes in act_connmark, from Etienne Noss. 13) Don't remove routes with a higher metric in ipv6 ECMP route replace, from Sabrina Dubroca. 14) Don't write into a cloned SKB in ipv6 fragmentation handling, from Florian Westphal. 15) Fix routing redirect races in dccp and tcp, basically the ICMP handler can't modify the socket's cached route in it's locked by the user at this moment. From Jon Maxwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits) qed: Enable iSCSI Out-of-Order qed: Correct out-of-bound access in OOO history qed: Fix interrupt flags on Rx LL2 qed: Free previous connections when releasing iSCSI qed: Fix mapping leak on LL2 rx flow qed: Prevent creation of too-big u32-chains qed: Align CIDs according to DORQ requirement mlxsw: reg: Fix SPVMLR max record count mlxsw: reg: Fix SPVM max record count net: Resend IGMP memberships upon peer notification. dccp: fix memory leak during tear-down of unsuccessful connection request tun: fix premature POLLOUT notification on tun devices dccp/tcp: fix routing redirect race ucc/hdlc: fix two little issue vxlan: fix ovs support net: use net->count to check whether a netns is alive or not bridge: drop netfilter fake rtable unconditionally ipv6: avoid write to a possibly cloned skb net: wimax/i2400m: fix NULL-deref at probe isdn/gigaset: fix NULL-deref at probe ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: "Three cgroup fixes. Nothing critical: - the pids controller could trigger suspicious RCU warning spuriously. Fixed. - in the debug controller, %p -> %pK to protect kernel pointer from getting exposed. - documentation formatting fix" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroups: censor kernel pointer in debug files cgroup/pids: remove spurious suspicious RCU usage warning cgroup: Fix indenting in PID controller documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "Three libata fixes: - fix for a circular reference bug in sysfs code which prevented pata_legacy devices from being released after probe failure, which in turn prevented devres from releasing the associated resources. - drop spurious WARN in the command issue path which can be triggered by a legitimate passthrough command. - an ahci_qoriq specific fix" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: qoriq: correct the sata ecc setting error libata: drop WARN from protocol error in ata_sff_qc_issue() libata: transport: Remove circular dependency at free time
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue fix from Tejun Heo: "If a delayed work is queued with NULL @wq, workqueue code explodes after the timer expires at which point it's difficult to tell who the culprit was. This actually happened and the offender was net/smc this time. Add an explicit sanity check for it in the queueing path" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
Pull percpu fixes from Tejun Heo: - the allocation path was updating pcpu_nr_empty_pop_pages without the required locking which can lead to incorrect handling of empty chunks (e.g. keeping too many around), which is buggy but shouldn't lead to critical failures. Fixed by adding the locking - a trivial patch to drop an unused param from pcpu_get_pages() * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: remove unused chunk_alloc parameter from pcpu_get_pages() percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages
-
由 David S. Miller 提交于
Yuval Mintz says: ==================== qed: Fixes series This address several different issues in qed. The more significant portions: Patch #1 would cause timeout when qedr utilizes the highest CIDs availble for it [or when future qede adapters would utilize queues in some constellations]. Patch #4 fixes a leak of mapped addresses; When iommu is enabled, offloaded storage protocols might eventually run out of resources and fail to map additional buffers. Patches #6,#7 were missing in the initial iSCSI infrastructure submissions, and would hamper qedi's stability when it reaches out-of-order scenarios. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mintz, Yuval 提交于
Missing in the initial submission, qed fails to propagate qedi's request to enable OOO to firmware. Fixes: fc831825 ("qed: Add support for hardware offloaded iSCSI") Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-