- 28 7月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
The recent fix to converter detaching timing in patch_hdmi.c leads to a kernel WARNING due to a sanity check when the debug option is set. Add a workaround by setting a dummy hinfo->nid. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 7月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
The generic HDMI code detaches the converter from the stream when unused, but it must be done rather in the close callback instead of the cleanup callback. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 7月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
BIOS on HP Mini 210 doesn't provide the proper "HP_Mute_LED" DMI string, thus the driver doesn't initialize the GPIO, too. In the earlier kernel, the driver falls back to GPIO1, but since 3.3 we've stopped this due to other wrongly advertised machines. For fixing this particular case, add a new model type to specify the default polarity explicitly so that the fallback to GPIO1 is handled. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=772923 Cc: <stable@vger.kernel.org> [v3.3+] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 7月, 2012 2 次提交
-
-
由 Takashi Iwai 提交于
The irq field of struct snd_mpu401 is supposed to be initialized to -1. Since it's set to zero as of now, a probing error before the irq installation results in a kernel warning "Trying to free already-free IRQ 0". Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44821 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
We've got a bug report about the silent output from the headphone on a mobo with VT2021, and spotted out that this was because of the wrong D3 state on the DAC for the headphone output. The bug is triggered by the incomplete check for this DAC in set_widgets_power_state_vt1718S(). It checks only the connectivity of the primary output (0x27) but doesn't consider the path from the headphone pin (0x28). Now this patch fixes the problem by checking both pins for DAC 0x0b. Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 7月, 2012 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound由 Takashi Iwai 提交于
ASoC: Additional updates for 3.6 A few more fixes for 3.6, some of which are relatively important - they've all been in -next for at least some time. - DAPM fixes for the recent locking changes. - Fix for _PRE and _POST widgets (which have been broken for a few releases now). - A couple of minor driver updates.
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
Ever since the DAPM performance improvements we've been marking all widgets as not dirty after each DAPM run. Since _PRE and _POST events aren't part of the DAPM graph this has rendered them non-functional, they will never be marked dirty again and thus will never be run again. Fix this by skipping them when marking widgets as not dirty. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com> Cc: stable@vger.kernel.org
-
- 20 7月, 2012 2 次提交
-
-
由 David Henningsson 提交于
Also add a model/fixup string "lenovo-dock", so that other Thinkpad users will be able to test this fixup easily, to see if it enables dock I/O for them as well. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1026953Tested-by: NJohn McCarron <john.mccarron@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dylan Reid 提交于
Turn on the pin widget's PIN_OUT bit from playback prepare. The pin is enabled in open, but is disabled in hdmi_init_pin which is called during system resume. This causes a system suspend/resume during playback to mute HDMI/DP. Enabling the pin in prepare instead of open allows calling snd_pcm_prepare after a system resume to restore audio. Signed-off-by: NDylan Reid <dgreid@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 7月, 2012 6 次提交
-
-
由 Takashi Iwai 提交于
This merges the changes for converting to new PM ops for platform and some other drivers. Also move some header files to local places from the public include/sound.
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound由 Takashi Iwai 提交于
ASoC: Updates for 3.6 This has been a pretty quiet release - very little activity in framework terms, mostly just a few new drivers and updates: - Added the ability to add and remove DAPM paths dynamically, mostly for reparenting on clock changes. - New machine drivers for Marvell Brownstone, ST-Ericsson Ux500 reference platform and ttc-dkp. - New CPU drivers for Blackfin BF6xx SPORTs in I2S mode, Marvell MMP, Synopsis Designware I2S controllers, and SPEAr DMA and S/PDIF - New CODEC drivers for Dialog DA732x, ST STA529, ST-Ericsson AB8500, TI Isabelle and Wolfson Microelectronics WM5102 and WM5110
-
由 Torben Hohn 提交于
The MX31 Audmux also has 7 Ports. This patch adds the missing define, and makes the debugfs code iterate over that port too. Signed-off-by: NTorben Hohn <torbenh@linutronix.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The conversion of the core driver to irqdomains means that we don't need and irq_base to have working interrupts so use wm8994_request_irq() to deal with looking up the interrupt number for the micdet IRQ. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 David Henningsson 提交于
A recent commit made patch_alc268 call snd_hda_pick_fixup with NULL quirk pointer. Make sure we do not reference that NULL pointer. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 7月, 2012 3 次提交
-
-
由 Takashi Iwai 提交于
Generic updates for sound 3.6
-
由 Takashi Iwai 提交于
This is a large chunk merge for 3.6 HD-audio things
-
由 David Henningsson 提交于
This codec has a separate dmic path (separate dmic only ADC), and thus it looks mostly like ALC275. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/1025377Tested-by: NRay Chen <ray.chen@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 7月, 2012 4 次提交
-
-
由 Takashi Iwai 提交于
Since some jack controls may be renamed as phantom jacks, the existing check for index conflicts doesn't work because it simply compares the name with the last used name, assuming that the controls with the same name continue. Thus, it would result in the duplicated controls when two or more phantom jacks with the very same type exist, and the driver gives up with an error. This patch fixes the problem by checking the index number conflicts more intensively (but dumbly). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In the previous commit, snd_opti9xx_configure() is called from the resume handler but it's still marked as __devinit. Fix it. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ondrej Zary 提交于
Implement suspend/resume support for Opti 92x and 93x chips. Tested with Opti 929A+AD1848 and Opti 931. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Aaron Plattner 提交于
Vendor ID 0x10de0051 is used by a yet-to-be-named GPU chip. Signed-off-by: NAaron Plattner <aplattner@nvidia.com> Acked-by: NAndy Ritger <aritger@nvidia.com> Reviewed-by: NDaniel Dadap <ddadap@nvidia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 7月, 2012 11 次提交
-
-
由 Takashi Iwai 提交于
According to Xingchao, This works for HDMI audio, otherwise there's blocking issue. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wang Xingchao 提交于
0x80862807 is HDMI id for Haswell HDA. Signed-off-by: NWang Xingchao <xingchao.wang@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wang Xingchao 提交于
this patch add proper id for Haswell HDA Controller. [Added AZX_DCAPS_POSFIX_COMBO flag by tiwai] Signed-off-by: NWang Xingchao <xingchao.wang@intel.com> Acked-by: NJaroslav Kysela <perex@perex.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ondrej Zary 提交于
Yamaha OPL3-SAx chips don't resume properly when playback is running - garbage is played after resume. Restoring the CS4231_PLAYBK_FORMAT register last fixes the problem. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ondrej Zary 提交于
By setting SNDRV_PCM_INFO_RESUME, wss_lib claims that it can restore the card state fully on resume. But in fact, it can't as DMA is not restored so any playback/capture running during suspend will fail to continue after resume. Remove SNDRV_PCM_INFO_RESUME flag from pcm info field to fix the problem. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Instead of the hard-to-mantain TLV_DB_RANGE_HEAD macro, use DECLARE_TLV_DB_RANGE, which computes its size automatically. (Also make this data const on the way.) Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add a DECLARE_TLV_DB_RANGE() macro so that dB range information can be specified without having to count the items manually for TLV_DB_RANGE_HEAD(). Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add the DECLARE_TLV_CONTAINER() macro to allow having static TLVs containing more than one item. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add helper macros with a little bit of preprocessor magic to automatically compute the length of a TLV item. This lets us avoid having to compute this by hand, and will allow to use items that do not use a fixed length. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sylwester Nawrocki 提交于
The s3c2410_gpio* calls are obsolete and have been scheduled for removal since several kernel releases. Remove them and use common gpiolib API. This patch is a prerequisite for removal of the obsolete S3C24XX SoC GPIO definitions. Compile tested only. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sylwester Nawrocki 提交于
The s3c2410_gpio* calls are obsolete and have been scheduled for removal since several kernel releases. Remove them and use common gpiolib API. This patch is a prerequisite for removal of the obsolete S3C24XX SoC GPIO definitions. Tested on Micro2440-SDK. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NSylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 13 7月, 2012 3 次提交
-
-
由 Marek Belisko 提交于
Fix following: sound/soc/soc-dapm.c: In function ‘dapm_clock_event’: sound/soc/soc-dapm.c:1021:1: warning: control reaches end of non-void function [-Wreturn-type] Signed-off-by: NMarek Belisko <marek.belisko@open-nandra.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Daniel Mack 提交于
The rework of the snd-usb endpoint logic moved the calls to snd_usb_set_interface() into the snd_usb_endpoint implemenation. This changed the order in which these calls are issued to the device, and thereby caused regressions for some webcams. Fix this by moving the calls back to pcm.c for now to make it work again and use snd_usb_endpoint_activate() to really tear down all remaining URBs in the flight, consequently fixing another regression caused by USB packets on the wire after altsetting 0 has been selected. Signed-off-by: NDaniel Mack <zonque@gmail.com> Reported-and-tested-by: NPhilipp Dreimann <philipp@dreimann.net> Reported-by: NJoseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mark Brown 提交于
Ensure robust startup of the part by going through the reset procedure prior to resyncing the full register cache, avoiding potential intermittent faults in some designs. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
- 12 7月, 2012 1 次提交
-
-
由 Matthias Kaehlcke 提交于
Release the memory of the routing table before leaving the function upon errors in the device tree Signed-off-by: NMatthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 11 7月, 2012 2 次提交
-
-
由 Mark Brown 提交于
The WM5110 is a highly integrated low power audio subsystem for smartphones, tablets and other portable audio devices. It combines an advanced DSP feature set with a flexible, high performance audio hub CODEC. This patch adds the audio CODEC driver for the device. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Dan Carpenter 提交于
GCC complains that "ret" is uninitialized here. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-By: NRajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-