Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Signed-off-by: NPaul Mackerras <paulus@samba.org>

The merged verison of ELF_CORE_COPY_REGS is basically the PPC64 version, with
a memset that came from PPC and a few types abstracted out into #defines. But
it's not _quite_ right.

The first problem is we calculate the number of registers with:
        nregs = sizeof(struct pt_regs) / sizeof(ELF_GREG_TYPE)

For a 32-bit process on a 64-bit kernel that's bogus because the registers are
64 bits, but ELF_GREG_TYPE is u32, so nregs == 88 which is wrong.

The other problem is the memset, which assumes a struct pt_regs is smaller
than a struct elf_regs. For a 32-bit process on a 64-bit kernel that's false.

The fix is to calculate the number of regs using sizeof(unsigned long), which
should always be right, and just memset the whole damn thing _before_ copying
the registers in.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

There's no reason for smp_release_cpus() to be asm, and most people can make
more sense of C code. Add an extern declaration to smp.h and remove the custom
one in machine_kexec.c
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

register_vpa() doesn't actually do a VPA register call it just uses the flags
you pass it, so rename it to vpa_call() to be clearer.

We can then define register_vpa() and unregister_vpa() which are both simple
wrappers around vpa_call(). (we'll need unregister_vpa() for kexec soon)

We can then cleanup vpa_init(), and because vpa_init() is only called from
platforms/pseries we remove the definition in asm-ppc64/smp.h.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

There's a few places already, and soon will be more, where we synthesise
branch instructions at runtime. Rather than doing it by hand in each case,
it would make sense to have one implementation.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Oops, replacing the two u64s in struct ipc64_perm with __u32s changed
the alignment of that structure, which could mess up userspace.
Revert to using two unsigned long longs (which is what ppc32 had
originally).  ppc64 orignally had two unsigned longs, but long long is
the same size on 64 bit, so this should be ok there too.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds missing header and thus fix the warning issued by ming prototype.
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Current comment on top of m8xx_cpm_dpinit is wrong.
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes these warnings:

      Building modules, stage 2.
      MODPOST
    *** Warning: "__ide_mm_insl" [drivers/ide/ide-core.ko] undefined!
    *** Warning: "__ide_mm_outsw" [drivers/ide/ide-core.ko] undefined!
    *** Warning: "__ide_mm_insw" [drivers/ide/ide-core.ko] undefined!
    *** Warning: "__ide_mm_outsl" [drivers/ide/ide-core.ko] undefined!
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently there is no Kconfig symbol to indicate that we want nvram
support on 64-bit kernels; it's assumed we always want it, so make
the powermac setup code always initialize the pmac nvram code if
64-bit.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The latest updates to bug.h generate build warnings in traps.c in
arch/ppc.  Fix print format specifiers to account for change of line type
to long from int.
Signed-off-by: NBecky Bruce <becky.bruce@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The extraction of PCI stuff from struct device_node left some false
assumptions in notifier code.  As a result, dynamic add crashes when
non-PCI nodes are added.  This patch fixes these assumptions.
Signed-off-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

It is only included by signal_32.c
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Move struct ptregs32 into asm-ppc64/ppc32.h
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Currently we set the kernel entry point and the address of the text
section in the Makefile, using CONFIG_KERNEL_START.

But we've already got <asm/page.h> in the linker script, so we can just
use KERNELBASE directly. That means if we ever change KERNELBASE there's
one less place to change it.

And we can set the entry point with ENTRY().

There are zero differences from "readelf -a vmlinux" with or without this
patch.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

There's some debugging in prom.c that wraps nastly on 80 character
terminals, reformat it to fit.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Merge include/asm-ppc/kexec.h and include/asm-ppc64/kexec.h.

The only thing that's really changed is that we now allocate crash_notes
properly on PPC32. It's address is exported via sysfs, so it's not correct
for it to be a pointer.

I've also removed some of the "we don't use this" comments, because they're
wrong (or perhaps were referring only to arch code).
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Move plpar_wrappers.h into arch/powerpc/platforms/pseries, fixup white space,
and update callers.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Move pSeries specific code in set_dabr() into a ppc_md function, this will
allow us to keep plpar_wrappers.h private to platforms/pseries.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

Copy default configs into arch/powerpc/configs, rename bpa_defconfig to
cell_defconfig while we're at it.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

This moves rtas-proc.c and rtas_flash.c into arch/powerpc/kernel, since
cell wants them as well as pseries (and chrp can use rtas-proc.c too,
at least in principle).  rtas_fw.c is gone, with its bits moved into
rtas_flash.c and rtas.c.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Include asm/rtas.h for prototype for rtas_call etc., and make the
`done' variable unsigned int since that's what rtas_call wants.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NPaul Mackerras <paulus@samba.org>

since it uses the lmb stuff in one place.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

These days, the NACA only exists on iSeries.  Therefore, this patch
moves naca.h from include/asm-ppc64 to arch/powerpc/platforms/iseries.
There was one file including naca.h outside of platforms/iseries -
arch/ppc64/kernel/udbg_scc.c.  However, that's obviously a hangover
from older days.  The include is not necessary, so this patch simply
removes it.

Built and booted on iSeries, built for G5 (which uses udbg_scc.o).
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NKelly Daly <kelly@au.ibm.com>

asm-ppc64/dart.h is included in exactly one place -
arch/powerpc/sysdev/u3_iommu.c.  This patch, therefore, moves it into
arch/powerpc/sysdev.  While we're at it, update the #ifndef/#define
protecting the include, and the filename in the comments of
u3_iommu.c.

Built and booted on pSeries and G5, built for ppc32 powermac.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>