- 30 10月, 2017 2 次提交
-
-
由 Tejun Heo 提交于
The local variable @cgrp isn't used if !CONFIG_CGROUP_SCHED. Mark the variable with __maybe_unused to avoid a compile warning. Reported-by: N"kbuild-all@01.org" <kbuild-all@01.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Chao Yu 提交于
Commit 201af4c0 ("cgroup: move cgroup files under kernel/cgroup/") have renamed kernel/cpuset.c to kernel/cgroup/cpuset.c, but forgot to update entry of cpuset module in MAINTAINERS, fix it. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 27 10月, 2017 1 次提交
-
-
由 Tejun Heo 提交于
The basic cpu stat is currently shown with "cpu." prefix in cgroup.stat, and the same information is duplicated in cpu.stat when cpu controller is enabled. This is ugly and not very scalable as we want to expand the coverage of stat information which is always available. This patch makes cgroup core always create "cpu.stat" file and show the basic cpu stat there and calls the cpu controller to show the extra stats when enabled. This ensures that the same information isn't presented in multiple places and makes future expansion of basic stats easier. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
-
- 30 9月, 2017 2 次提交
-
-
由 Tejun Heo 提交于
There are a couple interface issues which can be addressed in cgroup2 interface. * Stats from cpuacct being reported separately from the cpu stats. * Use of different time units. Writable control knobs use microseconds, some stat fields use nanoseconds while other cpuacct stat fields use centiseconds. * Control knobs which can't be used in the root cgroup still show up in the root. * Control knob names and semantics aren't consistent with other controllers. This patchset implements cpu controller's interface on cgroup2 which adheres to the controller file conventions described in Documentation/cgroups/cgroup-v2.txt. Overall, the following changes are made. * cpuacct is implictly enabled and disabled by cpu and its information is reported through "cpu.stat" which now uses microseconds for all time durations. All time duration fields now have "_usec" appended to them for clarity. Note that cpuacct.usage_percpu is currently not included in "cpu.stat". If this information is actually called for, it will be added later. * "cpu.shares" is replaced with "cpu.weight" and operates on the standard scale defined by CGROUP_WEIGHT_MIN/DFL/MAX (1, 100, 10000). The weight is scaled to scheduler weight so that 100 maps to 1024 and the ratio relationship is preserved - if weight is W and its scaled value is S, W / 100 == S / 1024. While the mapped range is a bit smaller than the orignal scheduler weight range, the dead zones on both sides are relatively small and covers wider range than the nice value mappings. This file doesn't make sense in the root cgroup and isn't created on root. * "cpu.weight.nice" is added. When read, it reads back the nice value which is closest to the current "cpu.weight". When written, it sets "cpu.weight" to the weight value which matches the nice value. This makes it easy to configure cgroups when they're competing against threads in threaded subtrees. * "cpu.cfs_quota_us" and "cpu.cfs_period_us" are replaced by "cpu.max" which contains both quota and period. v4: - Use cgroup2 basic usage stat as the information source instead of cpuacct. v3: - Added "cpu.weight.nice" to allow using nice values when configuring the weight. The feature is requested by PeterZ. - Merge the patch to enable threaded support on cpu and cpuacct. - Dropped the bits about getting rid of cpuacct from patch description as there is a pretty strong case for making cpuacct an implicit controller so that basic cpu usage stats are always available. - Documentation updated accordingly. "cpu.rt.max" section is dropped for now. v2: - cpu_stats_show() was incorrectly using CONFIG_FAIR_GROUP_SCHED for CFS bandwidth stats and also using raw division for u64. Use CONFIG_CFS_BANDWITH and do_div() instead. "cpu.rt.max" is not included yet. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org>
-
由 Tejun Heo 提交于
Make the following changes in preparation for the cpu controller interface implementation for cgroup2. This patch doesn't cause any functional differences. * s/cpu_stats_show()/cpu_cfs_stat_show()/ * s/cpu_files/cpu_legacy_files/ v2: Dropped cpuacct changes as it won't be used by cpu controller interface anymore. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org>
-
- 26 9月, 2017 2 次提交
-
-
由 Tejun Heo 提交于
cfb766da ("sched/cputime: Expose cputime_adjust()") made cputime_adjust() public for cgroup basic cpu stat support; however, the commit forgot to add a dummy implementaiton for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE leading to compiler errors on some s390 configurations. Fix it by adding the missing dummy implementation. Reported-by: N“kbuild-all@01.org” <kbuild-all@01.org> Fixes: cfb766da ("sched/cputime: Expose cputime_adjust()") Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Like other csets, init_css_set's dfl_cgrp is initialized when the cset gets linked. init_css_set gets linked in cgroup_init(). This has been fine till now but the recently added basic CPU usage accounting may end up accessing dfl_cgrp of init before cgroup_init() leading to the following oops. SELinux: Initializing. BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 IP: account_system_index_time+0x60/0x90 PGD 0 P4D 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.0-rc2-00003-g041cd640 #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS +1.9.3-20161025_171302-gandalf 04/01/2014 task: ffffffff81e10480 task.stack: ffffffff81e00000 RIP: 0010:account_system_index_time+0x60/0x90 RSP: 0000:ffff880011e03cb8 EFLAGS: 00010002 RAX: ffffffff81ef8800 RBX: ffffffff81e10480 RCX: 0000000000000003 RDX: 0000000000000000 RSI: 00000000000f4240 RDI: 0000000000000000 RBP: ffff880011e03cc0 R08: 0000000000010000 R09: 0000000000000000 R10: 0000000000000020 R11: 0000003b9aca0000 R12: 000000000001c100 R13: 0000000000000000 R14: ffffffff81e10480 R15: ffffffff81e03cd8 FS: 0000000000000000(0000) GS:ffff880011e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b0 CR3: 0000000001e09000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> account_system_time+0x45/0x60 account_process_tick+0x5a/0x140 update_process_times+0x22/0x60 tick_periodic+0x2b/0x90 tick_handle_periodic+0x25/0x70 timer_interrupt+0x15/0x20 __handle_irq_event_percpu+0x7e/0x1b0 handle_irq_event_percpu+0x23/0x60 handle_irq_event+0x42/0x70 handle_level_irq+0x83/0x100 handle_irq+0x6f/0x110 do_IRQ+0x46/0xd0 common_interrupt+0x9d/0x9d Fix it by statically initializing init_css_set.dfl_cgrp so that init's default cgroup is accessible from the get-go. Fixes: 041cd640 ("cgroup: Implement cgroup2 basic CPU usage accounting") Reported-by: N“kbuild-all@01.org” <kbuild-all@01.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 25 9月, 2017 11 次提交
-
-
由 Tejun Heo 提交于
In cgroup1, while cpuacct isn't actually controlling any resources, it is a separate controller due to combination of two factors - 1. enabling cpu controller has significant side effects, and 2. we have to pick one of the hierarchies to account CPU usages on. cpuacct controller is effectively used to designate a hierarchy to track CPU usages on. cgroup2's unified hierarchy removes the second reason and we can account basic CPU usages by default. While we can use cpuacct for this purpose, both its interface and implementation leave a lot to be desired - it collects and exposes two sources of truth which don't agree with each other and some of the exposed statistics don't make much sense. Also, it propagates all the way up the hierarchy on each accounting event which is unnecessary. This patch adds basic resource accounting mechanism to cgroup2's unified hierarchy and accounts CPU usages using it. * All accountings are done per-cpu and don't propagate immediately. It just bumps the per-cgroup per-cpu counters and links to the parent's updated list if not already on it. * On a read, the per-cpu counters are collected into the global ones and then propagated upwards. Only the per-cpu counters which have changed since the last read are propagated. * CPU usage stats are collected and shown in "cgroup.stat" with "cpu." prefix. Total usage is collected from scheduling events. User/sys breakdown is sourced from tick sampling and adjusted to the usage using cputime_adjust(). This keeps the accounting side hot path O(1) and per-cpu and the read side O(nr_updated_since_last_read). v2: Minor changes and documentation updates as suggested by Waiman and Roman. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Waiman Long <longman@redhat.com> Cc: Roman Gushchin <guro@fb.com>
-
由 Tejun Heo 提交于
Introduce cgroup_account_cputime[_field]() which wrap cpuacct_charge() and cgroup_account_field(). This doesn't introduce any functional changes and will be used to add cgroup basic resource accounting. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com>
-
由 Tejun Heo 提交于
Will be used by basic cgroup resource stat reporting later. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux由 Linus Torvalds 提交于
Pull DeviceTree fixes from Rob Herring: - fix build for !OF providing empty of_find_device_by_node - fix Abracon vendor prefix - sync dtx_diff include paths (again) - a stm32h7 clock binding doc fix * tag 'devicetree-fixes-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: clk: stm32h7: fix clock-cell size scripts/dtc: dtx_diff - 2nd update of include dts paths to match build dt-bindings: fix vendor prefix for Abracon of: provide inline helper for of_find_device_by_node
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Another round of CR3/PCID related fixes (I think this addresses all but one of the known problems with PCID support), an objtool fix plus a Clang fix that (finally) solves all Clang quirks to build a bootable x86 kernel as-is" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Fix inline asm call constraints for Clang objtool: Handle another GCC stack pointer adjustment bug x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code x86/mm: Factor out CR3-building code
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Ingo Molnar: "A clocksource driver section mismatch fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/integrator: Fix section mismatch warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Ingo Molnar: "Three irqchip driver fixes, and an affinity mask helper function bug fix affecting x86" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "genirq: Restrict effective affinity to interrupts actually using it" irqchip.mips-gic: Fix shared interrupt mask writes irqchip/gic-v4: Fix building with ancient gcc irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull address-limit checking fixes from Ingo Molnar: "This fixes a number of bugs in the address-limit (USER_DS) checks that got introduced in the merge window, (mostly) affecting the ARM and ARM64 platforms" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/syscalls: Move address limit check in loop arm/syscalls: Optimize address limit check Revert "arm/syscalls: Check address limit on user-mode return" syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_check
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull misc security layer update from James Morris: "This is the remaining 'general' change in the security tree for v4.14, following the direct merging of SELinux (+ TOMOYO), AppArmor, and seccomp. That's everything now for the security tree except IMA, which will follow shortly (I've been traveling for the past week with patchy internet)" * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: fix description of values returned by cap_inode_need_killpriv
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull TPM updates from James Morris: "Here are the TPM updates from Jarkko for v4.14, which I've placed in their own branch (next-tpm). I ended up cherry-picking them as other changes had been made in Jarkko's branch after he sent me his original pull request. I plan on maintaining a separate branch for TPM (and other security subsystems) from now on. From Jarkko: 'Not much this time except a few fixes'" * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: ibmvtpm: simplify crq initialization and document crq format tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers Documentation: tpm: add powered-while-suspended binding documentation tpm: tpm_crb: constify acpi_device_id. tpm: vtpm: constify vio_device_id
-
- 24 9月, 2017 7 次提交
-
-
由 Michal Suchanek 提交于
The crq is passed in registers and is the same on BE and LE hosts. However, current implementation allocates a structure on-stack to represent the crq, initializes the members swapping them to BE, and loads the structure swapping it from BE. This is pointless and causes GCC warnings about ununitialized members. Get rid of the structure and the warnings. Signed-off-by: NMichal Suchanek <msuchanek@suse.de> Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
由 Hamza Attak 提交于
The patch simply replaces all msleep function calls with usleep_range calls in the generic drivers. Tested with an Infineon TPM 1.2, using the generic tpm-tis module, for a thousand PCR extends, we see results going from 1m57s unpatched to 40s with the new patch. We obtain similar results when using the original and patched tpm_infineon driver, which is also part of the patch. Similarly with a STM TPM 2.0, using the CRB driver, it takes about 20ms per extend unpatched and around 7ms with the new patch. Note that the PCR consistency is untouched with this patch, each TPM has been tested with 10 million extends and the aggregated PCR value is continuously verified to be correct. As an extension of this work, this could potentially and easily be applied to other vendor's drivers. Still, these changes are not included in the proposed patch as they are untested. Signed-off-by: NHamza Attak <hamza@hpe.com> Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
由 Enric Balletbo i Serra 提交于
Add a new powered-while-suspended property to control the behavior of the TPM suspend/resume. Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: NSonny Rao <sonnyrao@chromium.org> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
由 Arvind Yadav 提交于
acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 4198 608 0 4806 12c6 drivers/char/tpm/tpm_crb.o File size After adding 'const': text data bss dec hex filename 4262 520 0 4782 12ae drivers/char/tpm/tpm_crb.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
由 Arvind Yadav 提交于
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
由 Stefan Berger 提交于
cap_inode_need_killpriv returns 1 if security.capability exists and has a value and inode_killpriv() is required, 0 otherwise. Fix the description of the return value to reflect this. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NSerge Hallyn <serge@hallyn.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: - Unbreak parisc bootloader by avoiding a gcc-7 optimization to convert multiple byte-accesses into one word-access. - Add missing HWPOISON page fault handler code. I completely missed that when I added HWPOISON support during this merge window and it only showed up now with the madvise07 LTP test case. - Fix backtrace unwinding to stop when stack start has been reached. - Issue warning if initrd has been loaded into memory regions with broken RAM modules. - Fix HPMC handler (parisc hardware fault handler) to comply with architecture specification. - Avoid compiler warnings about too large frame sizes. - Minor init-section fixes. * 'parisc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Unbreak bootloader due to gcc-7 optimizations parisc: Reintroduce option to gzip-compress the kernel parisc: Add HWPOISON page fault handler code parisc: Move init_per_cpu() into init section parisc: Check if initrd was loaded into broken RAM parisc: Add PDCE_CHECK instruction to HPMC handler parisc: Add wrapper for pdc_instr() firmware function parisc: Move start_parisc() into init section parisc: Stop unwinding at start of stack parisc: Fix too large frame size warnings
-
- 23 9月, 2017 15 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Doug Ledford: - Smattering of miscellanous fixes - A five patch series for i40iw that had a patch (5/5) that was larger than I would like, but I took it because it's needed for large scale users - An 8 patch series for bnxt_re that landed right as I was leaving on PTO and so had to wait until now...they are all appropriate fixes for -rc IMO * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (22 commits) bnxt_re: Don't issue cmd to delete GID for QP1 GID entry before the QP is destroyed bnxt_re: Fix memory leak in FRMR path bnxt_re: Remove RTNL lock dependency in bnxt_re_query_port bnxt_re: Fix race between the netdev register and unregister events bnxt_re: Free up devices in module_exit path bnxt_re: Fix compare and swap atomic operands bnxt_re: Stop issuing further cmds to FW once a cmd times out bnxt_re: Fix update of qplib_qp.mtu when modified i40iw: Add support for port reuse on active side connections i40iw: Add missing VLAN priority i40iw: Call i40iw_cm_disconn on modify QP to disconnect i40iw: Prevent multiple netdev event notifier registrations i40iw: Fail open if there are no available MSI-X vectors RDMA/vmw_pvrdma: Fix reporting correct opcodes for completion IB/bnxt_re: Fix frame stack compilation warning IB/mlx5: fix debugfs cleanup IB/ocrdma: fix incorrect fall-through on switch statement IB/ipoib: Suppress the retry related completion errors iw_cxgb4: remove the stid on listen create failure iw_cxgb4: drop listen destroy replies if no ep found ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix NAPI poll list corruption in enic driver, from Christian Lamparter. 2) Fix route use after free, from Eric Dumazet. 3) Fix regression in reuseaddr handling, from Josef Bacik. 4) Assert the size of control messages in compat handling since we copy it in from userspace twice. From Meng Xu. 5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.) from Ursula Braun. 6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn. 7) Don't use ARRAY_SIZE on spinlock array which might have zero entries, from Geert Uytterhoeven. 8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov Kasiviswanathan. 9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) inet: fix improper empty comparison net: use inet6_rcv_saddr to compare sockets net: set tb->fast_sk_family net: orphan frags on stand-alone ptype in dev_queue_xmit_nit MAINTAINERS: update git tree locations for ieee802154 subsystem net: prevent dst uses after free net: phy: Fix truncation of large IRQ numbers in phy_attached_print() net/smc: no close wait in case of process shut down net/smc: introduce a delay net/smc: terminate link group if out-of-sync is received net/smc: longer delay for client link group removal net/smc: adapt send request completion notification net/smc: adjust net_device refcount net/smc: take RCU read lock for routing cache lookup net/smc: add receive timeout check net/smc: add missing dev_put net: stmmac: Cocci spatch "of_table" lan78xx: Use default values loaded from EEPROM/OTP after reset lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE lan78xx: Fix for eeprom read/write when device auto suspend ...
-
由 Linus Torvalds 提交于
Merge tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor updates from John Johansen: "This is the apparmor pull request, similar to SELinux and seccomp. It's the same series that I was sent to James' security tree + one regression fix that was found after the series was sent to James and would have been sent for v4.14-rc2. Features: - in preparation for secid mapping add support for absolute root view based labels - add base infastructure for socket mediation - add mount mediation - add signal mediation minor cleanups and changes: - be defensive, ensure unconfined profiles have dfas initialized - add more debug asserts to apparmorfs - enable policy unpacking to audit different reasons for failure - cleanup conditional check for label in label_print - Redundant condition: prev_ns. in [label.c:1498] Bug Fixes: - fix regression in apparmorfs DAC access permissions - fix build failure on sparc caused by undeclared signals - fix sparse report of incorrect type assignment when freeing label proxies - fix race condition in null profile creation - Fix an error code in aafs_create() - Fix logical error in verify_header() - Fix shadowed local variable in unpack_trans_table()" * tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix apparmorfs DAC access permissions apparmor: fix build failure on sparc caused by undeclared signals apparmor: fix incorrect type assignment when freeing proxies apparmor: ensure unconfined profiles have dfas initialized apparmor: fix race condition in null profile creation apparmor: move new_null_profile to after profile lookup fns() apparmor: add base infastructure for socket mediation apparmor: add more debug asserts to apparmorfs apparmor: make policy_unpack able to audit different info messages apparmor: add support for absolute root view based labels apparmor: cleanup conditional check for label in label_print apparmor: add mount mediation apparmor: add the ability to mediate signals apparmor: Redundant condition: prev_ns. in [label.c:1498] apparmor: Fix an error code in aafs_create() apparmor: Fix logical error in verify_header() apparmor: Fix shadowed local variable in unpack_trans_table()
-
由 Josh Poimboeuf 提交于
For inline asm statements which have a CALL instruction, we list the stack pointer as a constraint to convince GCC to ensure the frame pointer is set up first: static inline void foo() { register void *__sp asm(_ASM_SP); asm("call bar" : "+r" (__sp)) } Unfortunately, that pattern causes Clang to corrupt the stack pointer. The fix is easy: convert the stack pointer register variable to a global variable. It should be noted that the end result is different based on the GCC version. With GCC 6.4, this patch has exactly the same result as before: defconfig defconfig-nofp distro distro-nofp before 9820389 9491555 8816046 8516940 after 9820389 9491555 8816046 8516940 With GCC 7.2, however, GCC's behavior has changed. It now changes its behavior based on the conversion of the register variable to a global. That somehow convinces it to *always* set up the frame pointer before inserting *any* inline asm. (Therefore, listing the variable as an output constraint is a no-op and is no longer necessary.) It's a bit overkill, but the performance impact should be negligible. And in fact, there's a nice improvement with frame pointers disabled: defconfig defconfig-nofp distro distro-nofp before 9796316 9468236 9076191 8790305 after 9796957 9464267 9076381 8785949 So in summary, while listing the stack pointer as an output constraint is no longer necessary for newer versions of GCC, it's still needed for older versions. Suggested-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: NMatthias Kaehlcke <mka@chromium.org> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Josh Poimboeuf 提交于
The kbuild bot reported the following warning with GCC 4.4 and a randconfig: net/socket.o: warning: objtool: compat_sock_ioctl()+0x1083: stack state mismatch: cfa1=7+160 cfa2=-1+0 This is caused by another GCC non-optimization, where it backs up and restores the stack pointer for no apparent reason: 2f91: 48 89 e0 mov %rsp,%rax 2f94: 4c 89 e7 mov %r12,%rdi 2f97: 4c 89 f6 mov %r14,%rsi 2f9a: ba 20 00 00 00 mov $0x20,%edx 2f9f: 48 89 c4 mov %rax,%rsp This issue would have been happily ignored before the following commit: dd88a0a0 ("objtool: Handle GCC stack pointer adjustment bug") But now that objtool is paying attention to such stack pointer writes to/from a register, it needs to understand them properly. In this case that means recognizing that the "mov %rsp, %rax" instruction is potentially a backup of the stack pointer. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: dd88a0a0 ("objtool: Handle GCC stack pointer adjustment bug") Link: http://lkml.kernel.org/r/8c7aa8e9a36fbbb6655d9d8e7cea58958c912da8.1505942196.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fixes from Rafael Wysocki: "These fix the initialization of resources in the ACPI WDAT watchdog driver, a recent regression in the ACPI device properties handling, a recent change in behavior causing the ACPI_HANDLE() macro to only work for GPL code and create a MAINTAINERS entry for ACPI PMIC drivers in order to specify the official reviewers for that code. Specifics: - Fix the initialization of resources in the ACPI WDAT watchdog driver that uses unititialized memory which causes compiler warnings to be triggered (Arnd Bergmann). - Fix a recent regression in the ACPI device properties handling that causes some device properties data to be skipped during enumeration (Sakari Ailus). - Fix a recent change in behavior that caused the ACPI_HANDLE() macro to stop working for non-GPL code which is a problem for the NVidia binary graphics driver, for example (John Hubbard). - Add a MAINTAINERS entry for the ACPI PMIC drivers to specify the official reviewers for that code (Rafael Wysocki)" * tag 'acpi-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again ACPI / watchdog: properly initialize resources ACPI / PMIC: Add code reviewers to MAINTAINERS
-
由 David S. Miller 提交于
Josef Bacik says: ==================== net: fix reuseaddr regression I introduced a regression when reworking the fastreuse port stuff that allows bind conflicts to occur once a reuseaddr successfully opens on an existing tb. The root cause is I reversed an if statement which caused us to set the tb as if there were no owners on the socket if there were, which obviously is not correct. Dave could you please queue these changes up for -stable, I've run them through the net tests and added another test to check for this problem specifically. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Josef Bacik 提交于
When doing my reuseport rework I screwed up and changed a if (hlist_empty(&tb->owners)) to if (!hlist_empty(&tb->owners)) This is obviously bad as all of the reuseport/reuse logic was reversed, which caused weird problems like allowing an ipv4 bind conflict if we opened an ipv4 only socket on a port followed by an ipv6 only socket on the same port. Fixes: b9470c27 ("inet: kill smallest_size and smallest_port") Reported-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Josef Bacik 提交于
In ipv6_rcv_saddr_equal() we need to use inet6_rcv_saddr(sk) for the ipv6 compare with the fast socket information to make sure we're doing the proper comparisons. Fixes: 637bc8bb ("inet: reset tb->fastreuseport when adding a reuseport sk") Reported-and-tested-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Josef Bacik 提交于
We need to set the tb->fast_sk_family properly so we can use the proper comparison function for all subsequent reuseport bind requests. Fixes: 637bc8bb ("inet: reset tb->fastreuseport when adding a reuseport sk") Reported-and-tested-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Zerocopy skbs frags are copied when the skb is looped to a local sock. Commit 1080e512 ("net: orphan frags on receive") introduced calls to skb_orphan_frags to deliver_skb and __netif_receive_skb for this. With msg_zerocopy, these skbs can also exist in the tx path and thus loop from dev_queue_xmit_nit. This already calls deliver_skb in its loop. But it does not orphan before a separate pt_prev->func(). Add the missing skb_orphan_frags_rx. Changes v1->v2: handle skb_orphan_frags_rx failure Fixes: 1f8b977a ("sock: enable MSG_ZEROCOPY") Signed-off-by: NWillem de Bruijn <willemb@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "These fix a cpufreq regression introduced by recent changes related to the generic DT driver, an initialization time memory leak in cpuidle on ARM, a PM core bug that may cause system suspend/resume to fail on some systems, a request type validation issue in the PM QoS framework and two documentation-related issues. Specifics: - Fix a regression in cpufreq on systems using DT as the source of CPU configuration information where two different code paths attempt to create the cpufreq-dt device object (there can be only one) and fix up the "compatible" matching for some TI platforms on top of that (Viresh Kumar, Dave Gerlach). - Fix an initialization time memory leak in cpuidle on ARM which occurs if the cpuidle driver initialization fails (Stefan Wahren). - Fix a PM core function that checks whether or not there are any system suspend/resume callbacks for a device, but forgets to check legacy callbacks which then may be skipped incorrectly and the system may crash and/or the device may become unusable after a suspend-resume cycle (Rafael Wysocki). - Fix request type validation for latency tolerance PM QoS requests which may lead to unexpected behavior (Jan Schönherr). - Fix a broken link to PM documentation from a header file and a typo in a PM document (Geert Uytterhoeven, Rafael Wysocki)" * tag 'pm-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: ti-cpufreq: Support additional am43xx platforms ARM: cpuidle: Avoid memleak if init fail cpufreq: dt-platdev: Add some missing platforms to the blacklist PM: core: Fix device_pm_check_callbacks() PM: docs: Drop an excess character from devices.rst PM / QoS: Use the correct variable to check the QoS request type driver core: Fix link to device power management documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input fixes from Dmitry Torokhov: - fixes for two long standing issues (lock up and a crash) in force feedback handling in uinput driver - tweak to firmware update timing in Elan I2C touchpad driver. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - extend Flash-Write delay Input: uinput - avoid crash when sending FF request to device going away Input: uinput - avoid FF flush when destroying device
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull seccomp updates from Kees Cook: "Major additions: - sysctl and seccomp operation to discover available actions (tyhicks) - new per-filter configurable logging infrastructure and sysctl (tyhicks) - SECCOMP_RET_LOG to log allowed syscalls (tyhicks) - SECCOMP_RET_KILL_PROCESS as the new strictest possible action - self-tests for new behaviors" [ This is the seccomp part of the security pull request during the merge window that was nixed due to unrelated problems - Linus ] * tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: samples: Unrename SECCOMP_RET_KILL selftests/seccomp: Test thread vs process killing seccomp: Implement SECCOMP_RET_KILL_PROCESS action seccomp: Introduce SECCOMP_RET_KILL_PROCESS seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD seccomp: Action to log before allowing seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW seccomp: Selftest for detection of filter flag support seccomp: Sysctl to configure actions that are allowed to be logged seccomp: Operation for checking if an action is available seccomp: Sysctl to display available actions seccomp: Provide matching filter for introspection selftests/seccomp: Refactor RET_ERRNO tests selftests/seccomp: Add simple seccomp overhead benchmark selftests/seccomp: Add tests for basic ptrace actions
-
由 Linus Torvalds 提交于
Merge tag '4.14-smb3-fixes-from-recent-test-events-for-stable' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Various SMB3 fixes for stable and security improvements from the recently completed SMB3/Samba test events * tag '4.14-smb3-fixes-from-recent-test-events-for-stable' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags SMB3: handle new statx fields SMB: Validate negotiate (to protect against downgrade) even if signing off cifs: release auth_key.response for reconnect. cifs: release cifs root_cred after exit_cifs CIFS: make arrays static const, reduces object code size [SMB3] Update session and share information displayed for debugging SMB2/SMB3 cifs: show 'soft' in the mount options for hard mounts SMB3: Warn user if trying to sign connection that authenticated as guest SMB3: Fix endian warning Fix SMB3.1.1 guest authentication to Samba
-