The DMAs have different bit sizes on BF52x and BF54x.  From the PHRM:

"The 16-bit DMA Access Bus (DAB) connects the DMA controller to the
on-chip peripherals, PPI, SPI, Ethernet MAC, the SPORTs, NFC,
HOSTDP and the UARTs."

32-bit DMA won't work for BF52x.
Signed-off-by: NCliff Cai <cliff.cai@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Just add a new on-flash-bbt module parameter.
Signed-off-by: NSimon Polette <spolette@adetelgroup.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

- Add support for 2KiB page size flashes
- Fix page address access for large pages
- Detect oob layout at runtime
- handle pagesize_2k variable
- Fix oob16 layout: reserve location 5 of oob area since it's used for bbt
Signed-off-by: NVladimir Barinov <vova.barinov@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Add optional callback to allow platform to initialize partitions.

Static partitions on a nand device could vary depending on the size of the
device.  This patch allows an optional platform callback to be used to
setup this partition information at runtime.

Scan order is:
	1) chip.part_probe_types
	2) chip.set_parts
	3) chip.partitions
	4) full mtd device (fallback for no partitions)

Some of the existing nand drivers could possibly be replaced by the
plat_nand driver by using this patch.  These include autcpu12.c and
ts7250.c drivers.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Add optional probe and remove callbacks to the plat_nand driver.

Some platforms may require additional setup, such as configuring the
memory controller, before the nand device can be accessed.  This patch
provides an optional callback to handle this setup as well as a callback
to teardown the setup.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: NAlexander Clouter <alex@digriz.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The RAMROOT function was a successful but non-portable attempt to append
the root filesystem to the end of the kernel image.  The preferred and
portable solution is to use an initramfs instead.

The only user of this function was the msp71xx configuration
in the MIPS architecture; as the use of the RAMROOT has been removed
from that configuration, there are no more users, so this code
can be removed.
Signed-off-by: NShane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Add missing __devexit_p wrapper and no more mark shutdown with __devexit.
Fixes build in configurations where devexit functions get discarded.
Signed-off-by: NMika Korhonen <mika.j.korhonen@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch allows otpinfo for CFI >= 1.0 and burst read for CFI >= 1.1.

references:
1.0:	http://www.datasheetcatalog.org/datasheets2/81/816884_1.pdf

1.1:	http://milkymist.org/doc/MT28F640J3.pdf
	http://www.delorie.com/agenda/specs/29066709.pdfSigned-off-by: NDaniel Ribeiro <drwyrm@gmail.com>
Acked-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This chip reports CFI 1.3, but the CFI PRI is like CFI 1.1. Add a quirk
to pass probe on this chip.

This patch depends on "MTD: CFI 1.0 and CFI 1.1"
Signed-off-by: NDaniel Ribeiro <drwyrm@gmail.com>
Acked-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch adds (write|read)_buf callbacks to plat_nand.

The NAND on the TS-7800 provisioned by the FPGA allows readw() and
readl() to be used which gives a 2.5x speed up.  To be able to use this
from the plat_nand driver a hook for read_buf (and also write_buf whilst
we are in there) need to be made available.  This patch adds the hook.
Signed-off-by: NAlexander Clouter <alex@digriz.org.uk>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Add SST39SF040 chip (like SST39SF020A but bigger - 4Mbit).
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Remove some legacy code from the davinci_nand driver, which made
cmdlinepart ignore the the MTD ID passed to it.  Boards can have
multiple NAND chips, and some do (like the DM357 EVM), so this
dated hack is undesirable.

Correct labels are like "davinci_nand.0" (for chipselect 0).
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

In addition to adding the Numonyx manufacturer code, this patch
also ensures 'sync. write' is disabled when reading identification
data - something that the Numonyx chip objects to, but the
Samsung chip seems to ignore.
Signed-off-by: NAdrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

this patch add m45pe10 [1] chip support to the m25p80 driver.

[1] http://www.numonyx.com/Documents/Datasheets/M45PE10.pdfSigned-off-by: NMatthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Make sure to pass the same dev_id data to free_irq() that was
used when calling request_irq(), otherwise we get a warning about
freeing an already free IRQ.
Signed-off-by: NMagnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Type of 'byte_addr' needes to be 'unsigned int' for 512 byte
ECC support.
Signed-off-by: NVimal Singh <vimalsingh@ti.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Minimal support for the 4-bit ECC engine found on DM355, DM365,
DA830/OMAP-L137, and similar recent DaVinci-family chips.

This is limited to small-page flash for now; there are some page
layout issues for large page chips.  Note that most boards using
this engine (like the DM355 EVM) include 2GiB large page chips.

Sanity tested on DM355 EVM after swapping the socketed NAND for
a small-page one.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Make the DaVinci NAND driver require platform_data with
board-specific configuration.  We can't actually do any
kind of sane job of configuring it otherwise.

Also fix the comment about picking the "best" ECC mode.

We can't do those any more; that relied on knowing what kind
of CPU we're using (they don't all support 4-bit ECC), and
current policy is that drivers not have cpu_is_*() checks.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Resolve issue noted by Sneha:  when computing oobavail from
the list of free areas in the OOB, don't assume there will
always be an unused slot at the end.  With ECC_HW_SYNDROME
and 4KiB page chips, it's fairly likely there *won't* be one.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: "Narnakaje, Snehaprabha" <nsnehaprabha@ti.com>"
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This file does not define any kernel-userspace API, all
it does it defines few helpers for userspace. Instead,
userspace should have a private copy of this file.

The main (if not the only) user is the mtd-utils package, but
it already has a private copy of this file.

This patch also removes references to 'jffs2-user.h' from
'Kbuild' and MAINTAINERS' files.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

With CONFIG_HOTPLUG=n, the following eror occurred during link:
local symbol 0: discarded in section `.devexit.text' from
drivers/built-in.o

It was caused by improper section reference. The __devexit_p()
should be added to the .remove function.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Remove all references to MTD ioctls from fs/compat_ioctl.c and let
them all be handled by mtd_compat_ioctl().
Signed-off-by: NKevin Cernekee <kpc.mtd@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NKevin Cernekee <kpc.mtd@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

1) Move the MEMREADOOB/MEMWRITEOOB compat_ioctl wrappers from
fs/compat_ioctl.c into mtdchar.c .  Original request was here:

http://lkml.org/lkml/2009/4/1/295

2) Add missing COMPATIBLE_IOCTL lines, so that mtd-utils does not error
out when running in 64/32 compatibility mode.

LKML-Reference: <200904011650.22928.arnd@arndb.de>
Signed-off-by: NKevin Cernekee <kpc.mtd@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

New MEMERASE/MEMREADOOB/MEMWRITEOOB ioctls are needed in order to support
64-bit offsets into large NAND flash devices.
Signed-off-by: NKevin Cernekee <kpc.mtd@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NKevin Cernekee <kpc.mtd@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

As pointed out by Kay Sievers, the name size limit is gone
from the driver-core, and BUS_ID_SIZE is obsolescent.

Rather than just papering over the problem by replacing the mtdname
array size with an arbitrary '20 + 2', fix the problem properly and
handle arbitrary name sizes.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch adds MTD concatenation support to integrator-flash.c for
platforms with more than one block of flash memory (e.g. RealView
PB11MPCore). The implementation is based on the sa1100-flash.c one.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

We'll fix it up again, but for now I don't think anyone really cares.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This breaks the dilnetpc map driver, but it could be fixed not to use
that option. We want to simplify the partition handling, and this is a
step towards that.

Remove superfluous 'index' field from private struct mtd_part too, while
we're at it.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Now the MTD core will do this for us, we don't need to hook it up from
the board drivers.

Shame we can't do shutdown from the class too...
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This is intended to suspend/resume the _chip_, while we leave board
drivers to handle their own suspend/resume for the controller.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

* git://git.infradead.org/mtd-2.6:
  mtd: fix timeout in M25P80 driver
  mtd: Bug in m25p80.c during whole-chip erase
  mtd: expose subpage size via sysfs
  mtd: mtd in mtd_release is unused without CONFIG_MTD_CHAR

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: MCE: make cmci_discover_lock irq-safe
  x86: xen, i386: reserve Xen pagetables
  x86, kexec: fix crashdump panic with CONFIG_KEXEC_JUMP
  x86-64: finish cleanup_highmaps()'s job wrt. _brk_end
  x86: fix boot hang in early_reserve_e820()
  x86: Fix a typo in a printk message
  x86, srat: do not register nodes beyond e820 map