- 17 11月, 2018 1 次提交
-
-
由 Andreas Gruenbacher 提交于
GFS2 passes the inode buffer head (dibh) from gfs2_iomap_begin to gfs2_iomap_end in iomap->private. It sets that private pointer in gfs2_iomap_get. Users of gfs2_iomap_get other than gfs2_iomap_begin would have to release iomap->private, but this isn't done correctly, leading to a leak of buffer head references. To fix this, move the code for setting iomap->private from gfs2_iomap_get to gfs2_iomap_begin. Fixes: 64bc06bb ("gfs2: iomap buffered write support") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 11月, 2018 2 次提交
-
-
由 Andreas Gruenbacher 提交于
The previous attempt to fix for metadata read-ahead during truncate was incorrect: for files with a height > 2 (1006989312 bytes with a block size of 4096 bytes), read-ahead requests were not being issued for some of the indirect blocks discovered while walking the metadata tree, leading to significant slow-downs when deleting large files. Fix that. In addition, only issue read-ahead requests in the first pass through the meta-data tree, while deallocating data blocks. Fixes: c3ce5aa9 ("gfs2: Fix metadata read-ahead during truncate") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
-
由 Andreas Gruenbacher 提交于
gfs2_put_super calls gfs2_clear_rgrpd to destroy the gfs2_rgrpd objects attached to the resource group glocks. That function should release the buffers attached to the gfs2_bitmap objects (bi_bh), but the call to gfs2_rgrp_brelse for doing that is missing. When gfs2_releasepage later runs across these buffers which are still referenced, it refuses to free them. This causes the pages the buffers are attached to to remain referenced as well. With enough mount/unmount cycles, the system will eventually run out of memory. Fix this by adding the missing call to gfs2_rgrp_brelse in gfs2_clear_rgrpd. (Also fix a gfs2_rgrp_relse -> gfs2_rgrp_brelse typo in a comment.) Fixes: 39b0f1e9 ("GFS2: Don't brelse rgrp buffer_heads every allocation") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
-
- 20 10月, 2018 1 次提交
-
-
由 Bob Peterson 提交于
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 16 10月, 2018 1 次提交
-
-
由 Bob Peterson 提交于
All the other functions that deal with the sd_ail_list run the list from the tail back to the head, iow, in reverse. We should do the same while writing revokes, otherwise we might miss removing entries properly from the list when we hit the limit of how many revokes we can write at one time (based on block size, which determines how many block pointers will fit in the revoke block). Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 12 10月, 2018 9 次提交
-
-
由 Andreas Gruenbacher 提交于
Function rgblk_free can only deal with one resource group at a time, so pass that resource group is as a parameter. Several of the callers already have the resource group at hand, so we only need additional lookup code in a few places. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> Reviewed-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
The state parameter of gfs2_rlist_alloc is set to LM_ST_EXCLUSIVE in all calls, so remove it and hardcode that state in gfs2_rlist_alloc instead. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> Reviewed-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Andreas Gruenbacher 提交于
Reservations in gfs can span multiple gfs2_bitmaps (but they won't span multiple resource groups). When removing a reservation, we want to clear the GBF_FULL flags of all involved gfs2_bitmaps, not just that of the first bitmap. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> Reviewed-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Andreas Gruenbacher 提交于
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> Reviewed-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Andreas Gruenbacher 提交于
This field indicates the size of the bitmap in bytes, similar to how the bi_blocks field indicates the size of the bitmap in blocks. In count_unlinked, replace an instance of bi_bytes * GFS2_NBBY by bi_blocks. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> Reviewed-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Andreas Gruenbacher 提交于
This definition is only used to define RGRP_RSRV_MINBLKS, with no benefit over defining RGRP_RSRV_MINBLKS directly. In addition, instead of forcing RGRP_RSRV_MINBLKS to be of type u32, cast it to that type where that type is required. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> Reviewed-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Andreas Gruenbacher 提交于
Move the rs_sizehint and rs_rgd_gh fields from struct gfs2_blkreserv into the inode: they are more closely related to the inode than to a particular reservation. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> Reviewed-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Andreas Gruenbacher 提交于
We already have a function that checks if a block is within a resource group, so use that in gfs2_rbm_from_block as well. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> Reviewed-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Andreas Gruenbacher 提交于
When gfs2_rbm_from_block fails, the rbm it returns is undefined, so we always want to make sure gfs2_rbm_from_block has succeeded before looking at the rbm. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com> Reviewed-by: NSteven Whitehouse <swhiteho@redhat.com>
-
- 09 10月, 2018 2 次提交
-
-
由 Steve Whitehouse 提交于
Add support for the GETFSLABEL ioctl in gfs2. I tested this patch and it works as expected. Signed-off-by: NSteve Whitehouse <swhiteho@redhat.com> Tested-by: NAbhi Das <adas@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Tim Smith 提交于
Flushing the workqueue can cause operations to happen which might call gfs2_log_reserve(), or get stuck waiting for locks taken by such operations. gfs2_log_reserve() can io_schedule(). If this happens, it will never wake because the only thing which can wake it is gfs2_logd() which was already stopped. This causes umount of a gfs2 filesystem to wedge permanently if, for example, the umount immediately follows a large delete operation. When this occured, the following stack trace was obtained from the umount command [<ffffffff81087968>] flush_workqueue+0x1c8/0x520 [<ffffffffa0666e29>] gfs2_make_fs_ro+0x69/0x160 [gfs2] [<ffffffffa0667279>] gfs2_put_super+0xa9/0x1c0 [gfs2] [<ffffffff811b7edf>] generic_shutdown_super+0x6f/0x100 [<ffffffff811b7ff7>] kill_block_super+0x27/0x70 [<ffffffffa0656a71>] gfs2_kill_sb+0x71/0x80 [gfs2] [<ffffffff811b792b>] deactivate_locked_super+0x3b/0x70 [<ffffffff811b79b9>] deactivate_super+0x59/0x60 [<ffffffff811d2998>] cleanup_mnt+0x58/0x80 [<ffffffff811d2a12>] __cleanup_mnt+0x12/0x20 [<ffffffff8108c87d>] task_work_run+0x7d/0xa0 [<ffffffff8106d7d9>] exit_to_usermode_loop+0x73/0x98 [<ffffffff81003961>] syscall_return_slowpath+0x41/0x50 [<ffffffff815a594c>] int_ret_from_sys_call+0x25/0x8f [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: NTim Smith <tim.smith@citrix.com> Signed-off-by: NMark Syms <mark.syms@citrix.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 08 10月, 2018 1 次提交
-
-
由 Andrew Price 提交于
When alloc_percpu() fails, sdp gets freed but sb->s_fs_info still points to the same address. Move the assignment after that error check so that s_fs_info can only point to a valid sdp or NULL, which is checked for later in the error path, in gfs2_kill_super(). Reported-by: syzbot+dcb8b3587445007f5808@syzkaller.appspotmail.com Signed-off-by: NAndrew Price <anprice@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 06 10月, 2018 1 次提交
-
-
由 Bob Peterson 提交于
Before this patch, various errors and messages were reported using the pr_* functions: pr_err, pr_warn, pr_info, etc., but that does not tell you which gfs2 mount had the problem, which is often vital to debugging. This patch changes the calls from pr_* to fs_* in most of the messages so that the file system id is printed along with the message. Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 05 10月, 2018 1 次提交
-
-
由 Bob Peterson 提交于
When an io error is hit, it calls gfs2_io_error_bh_i for every journal buffer it can't write. Since we changed gfs2_io_error_bh_i recently to withdraw later in the cycle, it sends a flood of errors to the console. This patch checks for the file system already being withdrawn, and if so, doesn't send more messages. It doesn't stop the flood of messages, but it slows it down and keeps it more reasonable. Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
- 29 8月, 2018 2 次提交
-
-
由 Bob Peterson 提交于
The GFS2_RDF_UPTODATE flag in the rgrp is used to determine when a rgrp buffer is valid. It's cleared when the glock is invalidated, signifying that the buffer data is now invalid. But before this patch, function update_rgrp_lvb was setting the flag when it determined it had a valid lvb. But that's an invalid assumption: just because you have a valid lvb doesn't mean you have valid buffers. After all, another node may have made the lvb valid, and this node just fetched it from the glock via dlm. Consider this scenario: 1. The file system is mounted with RGRPLVB option. 2. In gfs2_inplace_reserve it locks the rgrp glock EX, but thanks to GL_SKIP, it skips the gfs2_rgrp_bh_get. 3. Since loops == 0 and the allocation target (ap->target) is bigger than the largest known chunk of blocks in the rgrp (rs->rs_rbm.rgd->rd_extfail_pt) it skips that rgrp and bypasses the call to gfs2_rgrp_bh_get there as well. 4. update_rgrp_lvb sees the lvb MAGIC number is valid, so bypasses gfs2_rgrp_bh_get, but it still sets sets GFS2_RDF_UPTODATE due to this invalid assumption. 5. The next time update_rgrp_lvb is called, it sees the bit is set and just returns 0, assuming both the lvb and rgrp are both uptodate. But since this is a smaller allocation, or space has been freed by another node, thus adjusting the lvb values, it decides to use the rgrp for allocations, with invalid rd_free due to the fact it was never updated. This patch changes update_rgrp_lvb so it doesn't set the UPTODATE flag anymore. That way, it has no choice but to fetch the latest values. Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Bob Peterson 提交于
Before this patch, gfs2_rgrp_bh_get would check for lvb mismatches, but it wouldn't tell you what was actually wrong. This patch adds more information to help us debug it. It also makes rgrp consistency checks dump any bad rgrps, and the rgrp dump code dump any lvbs as well as the rgrp itself. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Acked-by: NSteven Whitehouse <swhiteho@redhat.com>
-
- 28 8月, 2018 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) ICE, E1000, IGB, IXGBE, and I40E bug fixes from the Intel folks. 2) Better fix for AB-BA deadlock in packet scheduler code, from Cong Wang. 3) bpf sockmap fixes (zero sized key handling, etc.) from Daniel Borkmann. 4) Send zero IPID in TCP resets and SYN-RECV state ACKs, to prevent attackers using it as a side-channel. From Eric Dumazet. 5) Memory leak in mediatek bluetooth driver, from Gustavo A. R. Silva. 6) Hook up rt->dst.input of ipv6 anycast routes properly, from Hangbin Liu. 7) hns and hns3 bug fixes from Huazhong Tan. 8) Fix RIF leak in mlxsw driver, from Ido Schimmel. 9) iova range check fix in vhost, from Jason Wang. 10) Fix hang in do_tcp_sendpages() with tls, from John Fastabend. 11) More r8152 chips need to disable RX aggregation, from Kai-Heng Feng. 12) Memory exposure in TCA_U32_SEL handling, from Kees Cook. 13) TCP BBR congestion control fixes from Kevin Yang. 14) hv_netvsc, ignore non-PCI devices, from Stephen Hemminger. 15) qed driver fixes from Tomer Tayar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits) net: sched: Fix memory exposure from short TCA_U32_SEL qed: fix spelling mistake "comparsion" -> "comparison" vhost: correctly check the iova range when waking virtqueue qlge: Fix netdev features configuration. net: macb: do not disable MDIO bus at open/close time Revert "net: stmmac: fix build failure due to missing COMMON_CLK dependency" net: macb: Fix regression breaking non-MDIO fixed-link PHYs mlxsw: spectrum_switchdev: Do not leak RIFs when removing bridge i40e: fix condition of WARN_ONCE for stat strings i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled ixgbe: fix driver behaviour after issuing VFLR ixgbe: Prevent unsupported configurations with XDP ixgbe: Replace GFP_ATOMIC with GFP_KERNEL igb: Replace mdelay() with msleep() in igb_integrated_phy_loopback() igb: Replace GFP_ATOMIC with GFP_KERNEL in igb_sw_init() igb: Use an advanced ctx descriptor for launchtime e1000: ensure to free old tx/rx rings in set_ringparam() e1000: check on netif_running() before calling e1000_up() ixgb: use dma_zalloc_coherent instead of allocator/memset ice: Trivial formatting fixes ...
-
- 27 8月, 2018 10 次提交
-
-
由 Jens Axboe 提交于
The email was botched in one entry, and I also forgot to update the location of the git tree. It'll be under the linux-block umbrella, just with different branches. Reported-by: NBaruch Siach <baruch@tkos.co.il> Fixes: 7634ccd2 ("libata: maintainership update") Signed-off-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
Via u32_change(), TCA_U32_SEL has an unspecified type in the netlink policy, so max length isn't enforced, only minimum. This means nkeys (from userspace) was being trusted without checking the actual size of nla_len(), which could lead to a memory over-read, and ultimately an exposure via a call to u32_dump(). Reachability is CAP_NET_ADMIN within a namespace. Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: NKees Cook <keescook@chromium.org> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer update from Thomas Gleixner: "New defines for the compat time* types so they can be shared between 32bit and 64bit builds. Not used yet, but merging them now allows the actual conversions to be merged through different maintainer trees without dependencies We still have compat interfaces for 32bit on 64bit even with the new 2038 safe timespec/val variants because pointer size is different. And for the old style timespec/val interfaces we need yet another 'compat' interface for both 32bit native and 32bit on 64bit" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: y2038: Provide aliases for compat helpers
-
git://git.infradead.org/users/willy/linux-dax由 Linus Torvalds 提交于
Pull IDA updates from Matthew Wilcox: "A better IDA API: id = ida_alloc(ida, GFP_xxx); ida_free(ida, id); rather than the cumbersome ida_simple_get(), ida_simple_remove(). The new IDA API is similar to ida_simple_get() but better named. The internal restructuring of the IDA code removes the bitmap preallocation nonsense. I hope the net -200 lines of code is convincing" * 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits) ida: Change ida_get_new_above to return the id ida: Remove old API test_ida: check_ida_destroy and check_ida_alloc test_ida: Convert check_ida_conv to new API test_ida: Move ida_check_max test_ida: Move ida_check_leaf idr-test: Convert ida_check_nomem to new API ida: Start new test_ida module target/iscsi: Allocate session IDs from an IDA iscsi target: fix session creation failure handling drm/vmwgfx: Convert to new IDA API dmaengine: Convert to new IDA API ppc: Convert vas ID allocation to new IDA API media: Convert entity ID allocation to new IDA API ppc: Convert mmu context allocation to new IDA API Convert net_namespace to new IDA API cb710: Convert to new IDA API rsxx: Convert to new IDA API osd: Convert to new IDA API sd: Convert to new IDA API ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull gcc plugin fix from Kees Cook: "Lift gcc test into Kconfig. This is for better behavior when the kernel is built with Clang, reported by Stefan Agner" * tag 'gcc-plugins-v4.19-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: Disable when building under Clang
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates from Thomas Gleixner: "Kernel: - Improve kallsyms coverage - Add x86 entry trampolines to kcore - Fix ARM SPE handling - Correct PPC event post processing Tools: - Make the build system more robust - Small fixes and enhancements all over the place - Update kernel ABI header copies - Preparatory work for converting libtraceevnt to a shared library - License cleanups" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy' tools arch x86: Update tools's copy of cpufeatures.h perf python: Fix pyrf_evlist__read_on_cpu() interface perf mmap: Store real cpu number in 'struct perf_mmap' perf tools: Remove ext from struct kmod_path perf tools: Add gzip_is_compressed function perf tools: Add lzma_is_compressed function perf tools: Add is_compressed callback to compressions array perf tools: Move the temp file processing into decompress_kmodule perf tools: Use compression id in decompress_kmodule() perf tools: Store compression id into struct dso perf tools: Add compression id into 'struct kmod_path' perf tools: Make is_supported_compression() static perf tools: Make decompress_to_file() function static perf tools: Get rid of dso__needs_decompress() call in __open_dso() perf tools: Get rid of dso__needs_decompress() call in symbol__disassemble() perf tools: Get rid of dso__needs_decompress() call in read_object_code() tools lib traceevent: Change to SPDX License format perf llvm: Allow passing options to llc in addition to clang perf parser: Improve error message for PMU address filters ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: - Correct the L1TF fallout on 32bit and the off by one in the 'too much RAM for protection' calculation. - Add a helpful kernel message for the 'too much RAM' case - Unbreak the VDSO in case that the compiler desides to use indirect jumps/calls and emits retpolines which cannot be resolved because the kernel uses its own thunks, which does not work for the VDSO. Make it use the builtin thunks. - Re-export start_thread() which was unexported when the 32/64bit implementation was unified. start_thread() is required by modular binfmt handlers. - Trivial cleanups * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation/l1tf: Suggest what to do on systems with too much RAM x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM x86/kvm/vmx: Remove duplicate l1d flush definitions x86/speculation/l1tf: Fix overflow in l1tf_pfn_limit() on 32bit x86/process: Re-export start_thread() x86/mce: Add notifier_block forward declaration x86/vdso: Fix vDSO build if a retpoline is emitted
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq update from Thomas Gleixner: "A small set of updats/fixes for the irq subsystem: - Allow GICv3 interrupts to be configured as wake-up sources to enable wakeup from suspend - Make the error handling of the STM32 irqchip init function work - A set of small cleanups and improvements" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Allow interrupt to be configured as wake-up sources irqchip/tango: Set irq handler and data in one go dt-bindings: irqchip: renesas-irqc: Document r8a774a1 support irqchip/s3c24xx: Remove unneeded comparison of unsigned long to 0 irqchip/stm32: Fix init error handling irqchip/bcm7038-l1: Hide cpu offline callback when building for !SMP
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull licking update from Thomas Gleixner: "Mark the switch cases which fall through to the next case with the proper comment so the fallthrough compiler checks can be enabled" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Mark expected switch fall-throughs
-
- 26 8月, 2018 8 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm memory-failure update from Dave Jiang: "As it stands, memory_failure() gets thoroughly confused by dev_pagemap backed mappings. The recovery code has specific enabling for several possible page states and needs new enabling to handle poison in dax mappings. In order to support reliable reverse mapping of user space addresses: 1/ Add new locking in the memory_failure() rmap path to prevent races that would typically be handled by the page lock. 2/ Since dev_pagemap pages are hidden from the page allocator and the "compound page" accounting machinery, add a mechanism to determine the size of the mapping that encompasses a given poisoned pfn. 3/ Given pmem errors can be repaired, change the speculatively accessed poison protection, mce_unmap_kpfn(), to be reversible and otherwise allow ongoing access from the kernel. A side effect of this enabling is that MADV_HWPOISON becomes usable for dax mappings, however the primary motivation is to allow the system to survive userspace consumption of hardware-poison via dax. Specifically the current behavior is: mce: Uncorrected hardware memory error in user-access at af34214200 {1}[Hardware Error]: It has been corrected by h/w and requires no further action mce: [Hardware Error]: Machine check events logged {1}[Hardware Error]: event severity: corrected Memory failure: 0xaf34214: reserved kernel page still referenced by 1 users [..] Memory failure: 0xaf34214: recovery action for reserved kernel page: Failed mce: Memory error not recovered <reboot> ...and with these changes: Injecting memory failure for pfn 0x20cb00 at process virtual address 0x7f763dd00000 Memory failure: 0x20cb00: Killing dax-pmd:5421 due to hardware memory corruption Memory failure: 0x20cb00: recovery action for dax page: Recovered Given all the cross dependencies I propose taking this through nvdimm.git with acks from Naoya, x86/core, x86/RAS, and of course dax folks" * tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, pmem: Restore page attributes when clearing errors x86/memory_failure: Introduce {set, clear}_mce_nospec() x86/mm/pat: Prepare {reserve, free}_memtype() for "decoy" addresses mm, memory_failure: Teach memory_failure() about dev_pagemap pages filesystem-dax: Introduce dax_lock_mapping_entry() mm, memory_failure: Collect mapping size in collect_procs() mm, madvise_inject_error: Let memory_failure() optionally take a page reference mm, dev_pagemap: Do not clear ->mapping on final put mm, madvise_inject_error: Disable MADV_SOFT_OFFLINE for ZONE_DEVICE pages filesystem-dax: Set page->index device-dax: Set page->index device-dax: Enable page_mapping() device-dax: Convert to vmf_insert_mixed and vm_fault_t
-
由 Linus Torvalds 提交于
Pull libnvdimm updates from Dave Jiang: "Collection of misc libnvdimm patches for 4.19 submission: - Adding support to read locked nvdimm capacity. - Change test code to make DSM failure code injection an override. - Add support for calculate maximum contiguous area for namespace. - Add support for queueing a short ARS when there is on going ARS for nvdimm. - Allow NULL to be passed in to ->direct_access() for kaddr and pfn params. - Improve smart injection support for nvdimm emulation testing. - Fix test code that supports for emulating controller temperature. - Fix hang on error before devm_memremap_pages() - Fix a bug that causes user memory corruption when data returned to user for ars_status. - Maintainer updates for Ross Zwisler emails and adding Jan Kara to fsdax" * tag 'libnvdimm-for-4.19_misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm: fix ars_status output length calculation device-dax: avoid hang on error before devm_memremap_pages() tools/testing/nvdimm: improve emulation of smart injection filesystem-dax: Do not request kaddr and pfn when not required md/dm-writecache: Don't request pointer dummy_addr when not required dax/super: Do not request a pointer kaddr when not required tools/testing/nvdimm: kaddr and pfn can be NULL to ->direct_access() s390, dcssblk: kaddr and pfn can be NULL to ->direct_access() libnvdimm, pmem: kaddr and pfn can be NULL to ->direct_access() acpi/nfit: queue issuing of ars when an uc error notification comes in libnvdimm: Export max available extent libnvdimm: Use max contiguous area for namespace size MAINTAINERS: Add Jan Kara for filesystem DAX MAINTAINERS: update Ross Zwisler's email address tools/testing/nvdimm: Fix support for emulating controller temperature tools/testing/nvdimm: Make DSM failure code injection an override acpi, nfit: Prefer _DSM over _LSR for namespace label reads libnvdimm: Introduce locked DIMM capacity support
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in DP_ERR error message Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
We don't wakeup the virtqueue if the first byte of pending iova range is the last byte of the range we just got updated. This will lead a virtqueue to wait for IOTLB updating forever. Fixing by correct the check and wake up the virtqueue in this case. Fixes: 6b1e6cc7 ("vhost: new device IOTLB API") Reported-by: NPeter Xu <peterx@redhat.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Reviewed-by: NPeter Xu <peterx@redhat.com> Tested-by: NPeter Xu <peterx@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
qlge_fix_features() is not supposed to modify hardware or driver state, rather it is supposed to only fix requested fetures bits. Currently qlge_fix_features() also goes for interface down and up unnecessarily if there is not even any change in features set. This patch changes/fixes following - 1) Move reload of interface or device re-config from qlge_fix_features() to qlge_set_features(). 2) Reload of interface in qlge_set_features() only if relevant feature bit (NETIF_F_HW_VLAN_CTAG_RX) is changed. 3) Get rid of qlge_fix_features() since driver is not really required to fix any features bit. Signed-off-by: NManish <manish.chopra@cavium.com> Reviewed-by: NBenjamin Poirier <bpoirier@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anssi Hannula 提交于
macb_reset_hw() is called from macb_close() and indirectly from macb_open(). macb_reset_hw() zeroes the NCR register, including the MPE (Management Port Enable) bit. This will prevent accessing any other PHYs for other Ethernet MACs on the MDIO bus, which remains registered at macb_reset_hw() time, until macb_init_hw() is called from macb_open() which sets the MPE bit again. I.e. currently the MDIO bus has a short disruption at open time and is disabled at close time until the interface is opened again. Fix that by only touching the RE and TE bits when enabling and disabling RX/TX. v2: Make macb_init_hw() NCR write a single statement. Fixes: 6c36a707 ("macb: Use generic PHY layer") Signed-off-by: NAnssi Hannula <anssi.hannula@bitwise.fi> Reviewed-by: NClaudiu Beznea <claudiu.beznea@microchip.com> Tested-by: NClaudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
This reverts commit bde49753. All legacy clock implementations now implement clk_set_rate() (Some implementations may be dummies, though). Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NArnd Bergmann <arnd@arnd.de> Acked-by: NJose Abreu <joabreu@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ahmad Fatoum 提交于
commit 739de9a1 ("net: macb: Reorganize macb_mii bringup") broke initializing macb on the EVB-KSZ9477 eval board. There, of_mdiobus_register was called even for the fixed-link representing the RGMII-link to the switch with the result that the driver attempts to enumerate PHYs on a non-existent MDIO bus: libphy: MACB_mii_bus: probed mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0 [snip] mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31 The "MDIO" bus registration succeeds regardless, having claimed the reset GPIO, and calling of_phy_register_fixed_link later on fails because it tries to claim the same GPIO: macb f0028000.ethernet: broken fixed-link specification Fix this by registering the fixed-link before calling mdiobus_register. Fixes: 739de9a1 ("net: macb: Reorganize macb_mii bringup") Signed-off-by: NAhmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-