On a filesystem with a 1k block size, the group descriptors live in
block 2, not block 1.  If the filesystem has bigalloc,meta_bg set,
however, the calculation of the group descriptor table location does
not take this into account and returns the wrong block number.  Fix
the calculation to return the correct value for this case.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

To avoid potential data races, use a spinlock which protects the raw
(on-disk) inode.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

Currently in ext4 there is quite a mess when it comes to naming
unwritten extents. Sometimes we call it uninitialized and sometimes we
refer to it as unwritten.

The right name for the extent which has been allocated but does not
contain any written data is _unwritten_. Other file systems are
using this name consistently, even the buffer head state refers to it as
unwritten. We need to fix this confusion in ext4.

This commit changes every reference to an uninitialized extent (meaning
allocated but unwritten) to unwritten extent. This includes comments,
function names and variable names. It even covers abbreviation of the
word uninitialized (such as uninit) and some misspellings.

This commit does not change any of the code paths at all. This has been
confirmed by comparing md5sums of the assembly code of each object file
after all the function names were stripped from it.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

With EXT4FS_DEBUG ext4_count_free_clusters() will call
ext4_read_block_bitmap() without s_group_info initialized, so we need to
initialize multi-block allocator before.

And dependencies that must be solved, to allow this:
- multi-block allocator needs in group descriptors
- need to install s_op before initializing multi-block allocator,
  because in ext4_mb_init_backend() new inode is created.
- initialize number of group desc blocks (s_gdb_count) otherwise
  number of clusters returned by ext4_free_clusters_after_init() is not correct.
  (see ext4_bg_num_gdb_nometa())

Here is the stack backtrace:

(gdb) bt
 #0  ext4_get_group_info (group=0, sb=0xffff880079a10000) at ext4.h:2430
 #1  ext4_validate_block_bitmap (sb=sb@entry=0xffff880079a10000,
     desc=desc@entry=0xffff880056510000, block_group=block_group@entry=0,
     bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:358
 #2  0xffffffff81232202 in ext4_wait_block_bitmap (sb=sb@entry=0xffff880079a10000,
     block_group=block_group@entry=0,
     bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:476
 #3  0xffffffff81232eaf in ext4_read_block_bitmap (sb=sb@entry=0xffff880079a10000,
     block_group=block_group@entry=0) at balloc.c:489
 #4  0xffffffff81232fc0 in ext4_count_free_clusters (sb=sb@entry=0xffff880079a10000) at balloc.c:665
 #5  0xffffffff81259ffa in ext4_check_descriptors (first_not_zeroed=<synthetic pointer>,
     sb=0xffff880079a10000) at super.c:2143
 #6  ext4_fill_super (sb=sb@entry=0xffff880079a10000, data=<optimized out>,
     data@entry=0x0 <irq_stack_union>, silent=silent@entry=0) at super.c:3851
     ...
Signed-off-by: NAzat Khuzhin <a3at.mail@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Set a in-memory superblock flag to indicate whether the file system is
designed to support the Hurd.

Also, add a sanity check to make sure the 64-bit feature is not set
for Hurd file systems, since i_file_acl_high conflicts with a
Hurd-specific field.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch adds new interfaces to create and destory cache,
ext4_xattr_create_cache() and ext4_xattr_destroy_cache(), and remove
the cache creation and destory calls from ex4_init_xattr() and
ext4_exitxattr() in fs/ext4/xattr.c.

fs/ext4/super.c has been changed so that when a filesystem is mounted
a cache is allocated and attched to its ext4_sb_info structure.

fs/mbcache.c has been changed so that only one slab allocator is
allocated and used by all mbcache structures.
Signed-off-by: NT. Makphaibulchoke <tmac@hp.com>

This is the only time it is required for ext4.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Previously, the no-op "mount -o mount /dev/xxx" operation when the
file system is already mounted read-write causes an implied,
unconditional syncfs().  This seems pretty stupid, and it's certainly
documented or guaraunteed to do this, nor is it particularly useful,
except in the case where the file system was mounted rw and is getting
remounted read-only.

However, it's possible that there might be some file systems that are
actually depending on this behavior.  In most file systems, it's
probably fine to only call sync_filesystem() when transitioning from
read-write to read-only, and there are some file systems where this is
not needed at all (for example, for a pseudo-filesystem or something
like romfs).
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Anders Larsen <al@alarsen.net>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: xfs@oss.sgi.com
Cc: linux-btrfs@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: codalist@coda.cs.cmu.edu
Cc: linux-ext4@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: fuse-devel@lists.sourceforge.net
Cc: cluster-devel@redhat.com
Cc: linux-mtd@lists.infradead.org
Cc: jfs-discussion@lists.sourceforge.net
Cc: linux-nfs@vger.kernel.org
Cc: linux-nilfs@vger.kernel.org
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Cc: reiserfs-devel@vger.kernel.org

init_inodecache is only called by __init init_ext4_fs.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If an ext4 file system is created by some tool other than mke2fs
(perhaps by someone who has a pathalogical fear of the GPL) that
doesn't set one or the other of the EXT2_FLAGS_{UN}SIGNED_HASH flags,
and that file system is then mounted read-only, don't try to modify
the s_flags field.  Otherwise, if dm_verity is in use, the superblock
will change, causing an dm_verity failure.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

When the filesystem doesn't support extents (like in ext2/3
compatibility modes), there is no need to reserve any clusters. Space
estimates for writing are exact, hole punching doesn't need new
metadata, and there are no unwritten extents to convert.

This fixes a problem when filesystem still having some free space when
accessed with a native ext2/3 driver suddently reports ENOSPC when
accessed with ext4 driver.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

That thing should be del_timer_sync(); consider what happens
if ext4_put_super() call of del_timer() happens to come just as it's
getting run on another CPU.  Since that timer reschedules itself
to run next day, you are pretty much guaranteed that you'll end up
with kfree'd scheduled timer, with usual fun consequences.  AFAICS,
that's -stable fodder all way back to 2010... [the second del_timer_sync()
is almost certainly not needed, but it doesn't hurt either]
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Many of the uses of get_random_bytes() do not actually need
cryptographically secure random numbers.  Replace those uses with a
call to prandom_u32(), which is faster and which doesn't consume
entropy from the /dev/random driver.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In the case of a storage device that suddenly disappears, or in the
case of significant file system corruption, this can result in a huge
flood of messages being sent to the console.  This can overflow the
file system containing /var/log/messages, or if a serial console is
configured, this can slow down the system so much that a hardware
watchdog can end up triggering forcing a system reboot.

Google-Bug-Id: 7258357
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Add support to the core direct-io code to defer AIO completions to user
context using a workqueue.  This replaces opencoded and less efficient
code in XFS and ext4 (we save a memory allocation for each direct IO)
and will be needed to properly support O_(D)SYNC for AIO.

The communication between the filesystem and the direct I/O code requires
a new buffer head flag, which is a bit ugly but not avoidable until the
direct I/O code stops abusing the buffer_head structure for communicating
with the filesystems.

Currently this creates a per-superblock unbound workqueue for these
completions, which is taken from an earlier patch by Jan Kara.  I'm
not really convinced about this use and would prefer a "normal" global
workqueue with a high concurrency limit, but this needs further discussion.

JK: Fixed ext4 part, dynamic allocation of the workqueue.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

It's always been a hassle that if an external journal's
device number changes, the filesystem won't mount.
And since boot-time enumeration can change, device number
changes aren't unusual.

The current mechanism to update the journal location is by
passing in a mount option w/ a new devnum, but that's a hassle;
it's a manual approach, fixing things after the fact.

Adding a mount option, "-o journal_path=/dev/$DEVICE" would
help, since then we can do i.e.

# mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ...

and it'll mount even if the devnum has changed, as shown here:

# losetup /dev/loop0 journalfile
# mke2fs -L mylabel-journal -O journal_dev /dev/loop0 
# mkfs.ext4 -L mylabel -J device=/dev/loop0 /dev/sdb1

Change the journal device number:

# losetup -d /dev/loop0
# losetup /dev/loop1 journalfile 

And today it will fail:

# mount /dev/sdb1 /mnt/test
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so

# dmesg | tail -n 1
[17343.240702] EXT4-fs (sdb1): error: couldn't read superblock of external journal

But with this new mount option, we can specify the new path:

# mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test
#

(which does update the encoded device number, incidentally):

# umount /dev/sdb1
# dumpe2fs -h /dev/sdb1 | grep "Journal device"
dumpe2fs 1.41.12 (17-May-2010)
Journal device:	          0x0701

But best of all we can just always mount by journal-path, and
it'll always work:

# mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test
#

So the journal_path option can be specified in fstab, and as long as
the disk is available somewhere, and findable by label (or by UUID),
we can mount.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

Don't emit OOM warnings when k.alloc calls fail when
there there is a v.alloc immediately afterwards.

Converted a kmalloc/vmalloc with memset to kzalloc/vzalloc.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: N"Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Commit 56889787 ("ext4: improve handling of conflicting mount options")
introduced incorrect messages shown while choosing wrong mount options.

First of all, both cases of incorrect mount options,
"data=journal,delalloc" and "data=journal,dioread_nolock" result in
the same error message.

Secondly, the problem above isn't solved for remount option: the
mismatched parameter is simply ignored.  Moreover, ext4_msg states
that remount with options "data=journal,delalloc" succeeded, which is
not true.

To fix it up, I added a simple check after parse_options() call to
ensure that data=journal and delalloc/dioread_nolock parameters are
not present at the same time.
Signed-off-by: NPiotr Sarna <p.sarna@partner.samsung.com>
Acked-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Commit 26092bf5 ("ext4: use a table-driven handler for mount options")
wrongly disallows the specifying the mount options nodelalloc and
data=journal simultaneously.  This is incorrect; it should have only
disallowed the combination of delalloc and data=journal
simultaneously.
Reported-by: NPiotr Sarna <p.sarna@partner.samsung.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Without this, module can't be reloaded.

[  500.521980] kmem_cache_sanity_check (ext4_extent_status): Cache name already exists.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org  # v3.8+

We now print mount options in a generic fashion in
ext4_show_options(), so we shouldn't be explicitly printing the
{usr,grp}quota options in ext4_show_quota_options().

Without this patch, /proc/mounts can look like this:

 /dev/vdb /vdb ext4 rw,relatime,quota,usrquota,data=ordered,usrquota 0 0
                                      ^^^^^^^^              ^^^^^^^^
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

The function ext4_get_group_number() was introduced as an optimization
in commit bd86298e.  Unfortunately, this commit incorrectly
calculate the group number for file systems with a 1k block size (when
s_first_data_block is 1 instead of zero).  This could cause the
following kernel BUG:

[  568.877799] ------------[ cut here ]------------
[  568.877833] kernel BUG at fs/ext4/mballoc.c:3728!
[  568.877840] Oops: Exception in kernel mode, sig: 5 [#1]
[  568.877845] SMP NR_CPUS=32 NUMA pSeries
[  568.877852] Modules linked in: binfmt_misc
[  568.877861] CPU: 1 PID: 3516 Comm: fs_mark Not tainted 3.10.0-03216-g7c6809ff-dirty #1
[  568.877867] task: c0000001fb0b8000 ti: c0000001fa954000 task.ti: c0000001fa954000
[  568.877873] NIP: c0000000002f42a4 LR: c0000000002f4274 CTR: c000000000317ef8
[  568.877879] REGS: c0000001fa956ed0 TRAP: 0700   Not tainted  (3.10.0-03216-g7c6809ff-dirty)
[  568.877884] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>  CR: 24000428  XER: 00000000
[  568.877902] SOFTE: 1
[  568.877905] CFAR: c0000000002b5464
[  568.877908]
GPR00: 0000000000000001 c0000001fa957150 c000000000c6a408 c0000001fb588000
GPR04: 0000000000003fff c0000001fa9571c0 c0000001fa9571c4 000138098c50625f
GPR08: 1301200000000000 0000000000000002 0000000000000001 0000000000000000
GPR12: 0000000024000422 c00000000f33a300 0000000000008000 c0000001fa9577f0
GPR16: c0000001fb7d0100 c000000000c29190 c0000000007f46e8 c000000000a14672
GPR20: 0000000000000001 0000000000000008 ffffffffffffffff 0000000000000000
GPR24: 0000000000000100 c0000001fa957278 c0000001fdb2bc78 c0000001fa957288
GPR28: 0000000000100100 c0000001fa957288 c0000001fb588000 c0000001fdb2bd10
[  568.877993] NIP [c0000000002f42a4] .ext4_mb_release_group_pa+0xec/0x1c0
[  568.877999] LR [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0
[  568.878004] Call Trace:
[  568.878008] [c0000001fa957150] [c0000000002f4274] .ext4_mb_release_group_pa+0xbc/0x1c0 (unreliable)
[  568.878017] [c0000001fa957200] [c0000000002fb070] .ext4_mb_discard_lg_preallocations+0x394/0x444
[  568.878025] [c0000001fa957340] [c0000000002fb45c] .ext4_mb_release_context+0x33c/0x734
[  568.878032] [c0000001fa957440] [c0000000002fbcf8] .ext4_mb_new_blocks+0x4a4/0x5f4
[  568.878039] [c0000001fa957510] [c0000000002ef56c] .ext4_ext_map_blocks+0xc28/0x1178
[  568.878047] [c0000001fa957640] [c0000000002c1a94] .ext4_map_blocks+0x2c8/0x490
[  568.878054] [c0000001fa957730] [c0000000002c536c] .ext4_writepages+0x738/0xc60
[  568.878062] [c0000001fa957950] [c000000000168a78] .do_writepages+0x5c/0x80
[  568.878069] [c0000001fa9579d0] [c00000000015d1c4] .__filemap_fdatawrite_range+0x88/0xb0
[  568.878078] [c0000001fa957aa0] [c00000000015d23c] .filemap_write_and_wait_range+0x50/0xfc
[  568.878085] [c0000001fa957b30] [c0000000002b8edc] .ext4_sync_file+0x220/0x3c4
[  568.878092] [c0000001fa957be0] [c0000000001f849c] .vfs_fsync_range+0x64/0x80
[  568.878098] [c0000001fa957c70] [c0000000001f84f0] .vfs_fsync+0x38/0x4c
[  568.878105] [c0000001fa957d00] [c0000000001f87f4] .do_fsync+0x54/0x90
[  568.878111] [c0000001fa957db0] [c0000000001f8894] .SyS_fsync+0x28/0x3c
[  568.878120] [c0000001fa957e30] [c000000000009c88] syscall_exit+0x0/0x7c
[  568.878125] Instruction dump:
[  568.878130] 60000000 813d0034 81610070 38000000 7f8b4800 419e001c 813f007c 7d2bfe70
[  568.878144] 7d604a78 7c005850 54000ffe 7c0007b4 <0b000000> e8a10076 e87f0090 7fa4eb78
[  568.878160] ---[ end trace 594d911d9654770b ]---

In addition fix the STD_GROUP optimization so that it works for
bigalloc file systems as well.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reported-by: NLi Zhong <lizhongfs@gmail.com>
Reviewed-by: NLukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org  # 3.10

Reduce the object size ~10% could be useful for embedded systems.

Add #ifdef CONFIG_PRINTK #else #endif blocks to hold formats and
arguments, passing " " to functions when !CONFIG_PRINTK and still
verifying format and arguments with no_printk.

$ size fs/ext4/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 239375	    610	    888	 240873	  3ace9	fs/ext4/built-in.o.new
 264167	    738	    888	 265793	  40e41	fs/ext4/built-in.o.old

    $ grep -E "CONFIG_EXT4|CONFIG_PRINTK" .config
    # CONFIG_PRINTK is not set
    CONFIG_EXT4_FS=y
    CONFIG_EXT4_USE_FOR_EXT23=y
    CONFIG_EXT4_FS_POSIX_ACL=y
    # CONFIG_EXT4_FS_SECURITY is not set
    # CONFIG_EXT4_DEBUG is not set
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Now we maintain an proper in-order LRU list in ext4 to reclaim entries
from extent status tree when we are under heavy memory pressure.  For
keeping this order, a spin lock is used to protect this list.  But this
lock burns a lot of CPU time.  We can use the following steps to trigger
it.

  % cd /dev/shm
  % dd if=/dev/zero of=ext4-img bs=1M count=2k
  % mkfs.ext4 ext4-img
  % mount -t ext4 -o loop ext4-img /mnt
  % cd /mnt
  % for ((i=0;i<160;i++)); do truncate -s 64g $i; done
  % for ((i=0;i<160;i++)); do cp $i /dev/null &; done
  % perf record -a -g
  % perf report

This commit tries to fix this problem.  Now a new member called
i_touch_when is added into ext4_inode_info to record the last access
time for an inode.  Meanwhile we never need to keep a proper in-order
LRU list.  So this can avoid to burns some CPU time.  When we try to
reclaim some entries from extent status tree, we use list_sort() to get
a proper in-order list.  Then we traverse this list to discard some
entries.  In ext4_sb_info, we use s_es_last_sorted to record the last
time of sorting this list.  When we traverse the list, we skip the inode
that is newer than this time, and move this inode to the tail of LRU
list.  When the head of the list is newer than s_es_last_sorted, we will
sort the LRU list again.

In this commit, we break the loop if s_extent_cache_cnt == 0 because
that means that all extents in extent status tree have been reclaimed.

Meanwhile in this commit, ext4_es_{un}register_shrinker()'s prototype is
changed to save a local variable in these functions.
Reported-by: NDave Hansen <dave.hansen@intel.com>
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch removed several unused variables.
Signed-off-by: NJon Ernst <jonernst07@gmx.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If filesystem was aborted after inode's write back is complete
but before its metadata was updated we may return success
results in data loss.
In order to handle fs abort correctly we have to check
fs state once we discover that it is in MS_RDONLY state

Test case: http://patchwork.ozlabs.org/patch/244297Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Inode's data or non journaled quota may be written w/o jounral so we
_must_ send a barrier at the end of ext4_sync_fs. But it can be
skipped if journal commit will do it for us.

Also fix data integrity for nojournal mode.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Now that we have extent conversions with reserved transaction, we have
to prevent extent conversions without reserved transaction (from DIO
code) to block these (as that would effectively void any transaction
reservation we did).  So split lists, work items, and work queues to
reserved and unreserved parts.
Reviewed-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This attribute is now unused so deprecate it.  We still show the old
default value to keep some compatibility but we don't allow writing to
that attribute anymore.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Suppress the messages releating to processing the ext4 orphan list
("truncating inode" and "deleting unreferenced inode") unless the
debug option is on, since otherwise they end up taking up space in the
log that could be used for more useful information.

Tested by opening several files, unlinking them, then
crashing the system, rebooting the system and examining
/var/log/messages.

Addresses the problem described in http://crbug.com/220976Signed-off-by: NPaul Taysom <taysom@chromium.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Currently we do not tell mm to zero out tail of the page before truncate
in orphan_cleanup(). This is ok, because the page should not be
uptodate, however this may eventually change and I might cause problems.

Call truncate_inode_pages() as precautionary measure. Thanks Jan Kara
for pointing this out.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

same story as with the previous patches - note that return
value of blkdev_close() is lost, since there's nowhere the
caller (__fput()) could return it to.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

As Dave Chinner pointed out at the 2013 LSF/MM workshop, it's
important that metadata I/O requests are marked as such to avoid
priority inversions caused by I/O bandwidth throttling.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In parse_strtoul() we're still using deprecated simple_strtoul().  Remove
parse_strtoul() altogether and replace it with kstrtoul()
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

None of these result in any bug, but they makes sparse complain.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Currently in ENOSPC condition when writing into unwritten space, or
punching a hole, we might need to split the extent and grow extent tree.
However since we can not allocate any new metadata blocks we'll have to
zero out unwritten part of extent or punched out part of extent, or in
the worst case return ENOSPC even though use actually does not allocate
any space.

Also in delalloc path we do reserve metadata and data blocks for the
time we're going to write out, however metadata block reservation is
very tricky especially since we expect that logical connectivity implies
physical connectivity, however that might not be the case and hence we
might end up allocating more metadata blocks than previously reserved.
So in future, metadata reservation checks should be removed since we can
not assure that we do not under reserve.

And this is where reserved space comes into the picture. When mounting
the file system we slice off a little bit of the file system space (2%
or 4096 clusters, whichever is smaller) which can be then used for the
cases mentioned above to prevent costly zeroout, or unexpected ENOSPC.

The number of reserved clusters can be set via sysfs, however it can
never be bigger than number of free clusters in the file system.

Note that this patch fixes the failure of xfstest 274 as expected.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>

The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data.  Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We didn't mark hidden quota files with S_NOQUOTA flag and thus quota was
accounted even for quota files. Thus we could recurse back to quota code
when adding new blocks to quota file which can easily deadlock. Mark
hidden quota files properly.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Currently in when getting the block group number for a particular
block in ext4_block_in_group() we're using
ext4_get_group_no_and_offset() which uses do_div() to get the block
group and the remainer which is offset within the group.

We don't need all of that in ext4_block_in_group() as we only need to
figure out the group number.

This commit changes ext4_block_in_group() to calculate group number
directly. This shows as a big improvement with regards to cpu
utilization. Measuring fallocate -l 15T on fresh file system with perf
showed that 23% of cpu time was spend in the
ext4_get_group_no_and_offset(). With this change it completely
disappears from the list only bumping the occurrence of
ext4_init_block_bitmap() which is the biggest user of
ext4_block_in_group() by 4%. As the result of this change on my system
the fallocate call was approx. 10% faster.

However since there is '-g' option in mkfs which allow us setting
different groups size (mostly for developers) I've introduced new per
file system flag whether we have a standard block group size or
not. The flag is used to determine whether we can use the bit shift
optimization or not.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Otherwise destroyed ext_sb_info will be part of global shinker list
and result in the following OOPS:

JBD2: corrupted journal superblock
JBD2: recovery failed
EXT4-fs (dm-2): error loading journal
general protection fault: 0000 [#1] SMP
Modules linked in: fuse acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel microcode sg button sd_mod crc_t10dif ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_\
mod
CPU 1
Pid: 2758, comm: mount Not tainted 3.8.0-rc3+ #136                  /DH55TC
RIP: 0010:[<ffffffff811bfb2d>]  [<ffffffff811bfb2d>] unregister_shrinker+0xad/0xe0
RSP: 0000:ffff88011d5cbcd8  EFLAGS: 00010207
RAX: 6b6b6b6b6b6b6b6b RBX: 6b6b6b6b6b6b6b53 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
RBP: ffff88011d5cbce8 R08: 0000000000000002 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff88011cd3f848
R13: ffff88011cd3f830 R14: ffff88011cd3f000 R15: 0000000000000000
FS:  00007f7b721dd7e0(0000) GS:ffff880121a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007fffa6f75038 CR3: 000000011bc1c000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process mount (pid: 2758, threadinfo ffff88011d5ca000, task ffff880116aacb80)
Stack:
ffff88011cd3f000 ffffffff8209b6c0 ffff88011d5cbd18 ffffffff812482f1
00000000000003f3 00000000ffffffea ffff880115f4c200 0000000000000000
ffff88011d5cbda8 ffffffff81249381 ffff8801219d8bf8 ffffffff00000000
Call Trace:
[<ffffffff812482f1>] deactivate_locked_super+0x91/0xb0
[<ffffffff81249381>] mount_bdev+0x331/0x340
[<ffffffff81376730>] ? ext4_alloc_flex_bg_array+0x180/0x180
[<ffffffff81362035>] ext4_mount+0x15/0x20
[<ffffffff8124869a>] mount_fs+0x9a/0x2e0
[<ffffffff81277e25>] vfs_kern_mount+0xc5/0x170
[<ffffffff81279c02>] do_new_mount+0x172/0x2e0
[<ffffffff8127aa56>] do_mount+0x376/0x380
[<ffffffff8127ab98>] sys_mount+0x138/0x150
[<ffffffff818ffed9>] system_call_fastpath+0x16/0x1b
Code: 8b 05 88 04 eb 00 48 3d 90 ff 06 82 48 8d 58 e8 75 19 4c 89 e7 e8 e4 d7 2c 00 48 c7 c7 00 ff 06 82 e8 58 5f ef ff 5b 41 5c c9 c3 <48> 8b 4b 18 48 8b 73 20 48 89 da 31 c0 48 c7 c7 c5 a0 e4 81 e\
8
RIP  [<ffffffff811bfb2d>] unregister_shrinker+0xad/0xe0
RSP <ffff88011d5cbcd8>
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org