- 14 8月, 2009 32 次提交
-
-
由 Tejun Heo 提交于
sparc64 currently allocates a large page for each cpu and partially remap them into vmalloc area much like what lpage first chunk allocator did. As a 4M page is used for each cpu, this results in very large unit size and also adds TLB pressure due to the double mapping of pages in the first chunk. This patch converts sparc64 to use the embedding percpu first chunk allocator which now knows how to handle NUMA configurations. This simplifies the code a lot, doesn't incur any extra TLB pressure and results in better utilization of address space. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tejun Heo 提交于
With x86 converted to embedding allocator, lpage doesn't have any user left. Kill it along with cpa handling code. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Jan Beulich <JBeulich@novell.com>
-
由 Tejun Heo 提交于
Embedding percpu first chunk allocator can now handle very sparse unit mapping. Use embedding allocator instead of lpage for 64bit NUMA. This removes extra TLB pressure and the need to do complex and fragile dancing when changing page attributes. For 32bit, using very sparse unit mapping isn't a good idea because the vmalloc space is very constrained. 32bit NUMA machines aren't exactly the focus of optimization and it isn't very clear whether lpage performs better than page. Use page first chunk allocator for 32bit NUMAs. As this leaves setup_pcpu_*() functions pretty much empty, fold them into setup_per_cpu_areas(). Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <andi@firstfloor.org>
-
由 Tejun Heo 提交于
Now that percpu core can handle very sparse units, given that vmalloc space is large enough, embedding first chunk allocator can use any memory to build the first chunk. This patch teaches pcpu_embed_first_chunk() about distances between cpus and to use alloc/free callbacks to allocate node specific areas for each group and use them for the first chunk. This brings the benefits of embedding allocator to NUMA configurations - no extra TLB pressure with the flexibility of unified dynamic allocator and no need to restructure arch code to build memory layout suitable for percpu. With units put into atom_size aligned groups according to cpu distances, using large page for dynamic chunks is also easily possible with falling back to reuglar pages if large allocation fails. Embedding allocator users are converted to specify NULL cpu_distance_fn, so this patch doesn't cause any visible behavior difference. Following patches will convert them. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
ai->groups[] contains which units need to be put consecutively and at what offset from the chunk base address. Compile this information into pcpu_group_offsets[] and pcpu_group_sizes[] in pcpu_setup_first_chunk() and use them to allocate sparse vm areas using pcpu_get_vm_areas(). This will be used to allow directly using sparse NUMA memories as percpu areas. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Nick Piggin <npiggin@suse.de>
-
由 Tejun Heo 提交于
To directly use spread NUMA memories for percpu units, percpu allocator will be updated to allow sparsely mapping units in a chunk. As the distances between units can be very large, this makes allocating single vmap area for each chunk undesirable. This patch implements pcpu_get_vm_areas() and pcpu_free_vm_areas() which allocates and frees sparse congruent vmap areas. pcpu_get_vm_areas() take @offsets and @sizes array which define distances and sizes of vmap areas. It scans down from the top of vmalloc area looking for the top-most address which can accomodate all the areas. The top-down scan is to avoid interacting with regular vmallocs which can push up these congruent areas up little by little ending up wasting address space and page table. To speed up top-down scan, the highest possible address hint is maintained. Although the scan is linear from the hint, given the usual large holes between memory addresses between NUMA nodes, the scanning is highly likely to finish after finding the first hole for the last unit which is scanned first. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Nick Piggin <npiggin@suse.de>
-
由 Tejun Heo 提交于
Separate out insert_vmalloc_vm() from __get_vm_area_node(). insert_vmalloc_vm() initializes vm_struct from vmap_area and inserts it into vmlist. insert_vmalloc_vm() only initializes fields which can be determined from @vm, @flags and @caller The rest should be initialized by the caller. For __get_vm_area_node(), all other fields just need to be cleared and this is done by using kzalloc instead of kmalloc. This will be used to implement pcpu_get_vm_areas(). Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Nick Piggin <npiggin@suse.de>
-
由 Tejun Heo 提交于
The only thing percpu allocator wants to know about a vmalloc area is the base address. Instead of requiring chunk->vm, add chunk->base_addr which contains the necessary value. This simplifies the code a bit and makes the dummy first_vm unnecessary. This change will ease allowing a chunk to be mapped by multiple vms. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Currently units are mapped sequentially into address space. This patch adds pcpu_unit_offsets[] which allows units to be mapped to arbitrary offsets from the chunk base address. This is necessary to allow sparse embedding which might would need to allocate address ranges and memory areas which aren't aligned to unit size but allocation atom size (page or large page size). This also simplifies things a bit by removing the need to calculate offset from unit number. With this change, there's no need for the arch code to know pcpu_unit_size. Update pcpu_setup_first_chunk() and first chunk allocators to return regular 0 or -errno return code instead of unit size or -errno. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: David S. Miller <davem@davemloft.net>
-
由 Tejun Heo 提交于
Till now, non-linear cpu->unit map was expressed using an integer array which maps each cpu to a unit and used only by lpage allocator. Although how many units have been placed in a single contiguos area (group) is known while building unit_map, the information is lost when the result is recorded into the unit_map array. For lpage allocator, as all allocations are done by lpages and whether two adjacent lpages are in the same group or not is irrelevant, this didn't cause any problem. Non-linear cpu->unit mapping will be used for sparse embedding and this grouping information is necessary for that. This patch introduces pcpu_alloc_info which contains all the information necessary for initializing percpu allocator. pcpu_alloc_info contains array of pcpu_group_info which describes how units are grouped and mapped to cpus. pcpu_group_info also has base_offset field to specify its offset from the chunk's base address. pcpu_build_alloc_info() initializes this field as if all groups are allocated back-to-back as is currently done but this will be used to sparsely place groups. pcpu_alloc_info is a rather complex data structure which contains a flexible array which in turn points to nested cpu_map arrays. * pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to help dealing with pcpu_alloc_info. * pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info, generalized and renamed to pcpu_build_alloc_info(). @cpu_distance_fn may be NULL indicating that all cpus are of LOCAL_DISTANCE. * pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info, generalized and renamed to pcpu_dump_alloc_info(). It now also prints which group each alloc unit belongs to. * pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the separate parameters. All first chunk allocators are updated to use pcpu_build_alloc_info() to build alloc_info and call pcpu_setup_first_chunk() with it. This has the side effect of packing units for sparse possible cpus. ie. if cpus 0, 2 and 4 are possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4. * x86 setup_pcpu_lpage() is updated to deal with alloc_info. * sparc64 setup_per_cpu_areas() is updated to build alloc_info. Although the changes made by this patch are pretty pervasive, it doesn't cause any behavior difference other than packing of sparse cpus. It mostly changes how information is passed among initialization functions and makes room for more flexibility. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net>
-
由 Tejun Heo 提交于
Unit map handling will be generalized and extended and used for embedding sparse first chunk and other purposes. Relocate two unit_map related functions upward in preparation. This patch just moves the code without any actual change. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
pcpu_fc_alloc_fn_t is about to see more interesting usage, add @align parameter. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Now that all actual first chunk allocation and copying happen in the first chunk allocators and helpers, there's no reason for pcpu_setup_first_chunk() to try to determine @dyn_size automatically. The only left user is page first chunk allocator. Make it determine dyn_size like other allocators and make @dyn_size mandatory for pcpu_setup_first_chunk(). Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
First chunk allocators assume percpu areas have been linked using one of PERCPU_*() macros and depend on __per_cpu_load symbol defined by those macros, so there isn't much point in passing in static area size explicitly when it can be easily calculated from __per_cpu_start and __per_cpu_end. Drop @static_size from all percpu first chunk allocators and helpers. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Now that all first chunk allocators are in mm/percpu.c, it makes sense to make generalize percpu_alloc kernel parameter. Define PCPU_FC_* and set pcpu_chosen_fc using early_param() in mm/percpu.c. Arch code can use the set value to determine which first chunk allocator to use. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
There's no need to build unused first chunk allocators in. Define CONFIG_NEED_PER_CPU_*_FIRST_CHUNK and let archs enable them selectively. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Page size isn't always 4k depending on arch and configuration. Rename 4k first chunk allocator to page. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: David Howells <dhowells@redhat.com>
-
由 Tejun Heo 提交于
Improve percpu boot messages such that they're uniform and contain more information. Signed-off-by: NTejun Heo <tj@kernel.org> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>
-
由 Tejun Heo 提交于
pcpu_reclaim() calls pcpu_depopulate_chunk() which makes use of pages array and bitmap returned by pcpu_get_pages_and_bitmap() and thus should be called under pcpu_alloc_mutex. pcpu_reclaim() released the mutex before calling depopulate leading to double free and other strange problems caused by the unexpected concurrent usages of pages array and bitmap. Fix it. Signed-off-by: NTejun Heo <tj@kernel.org> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>
-
由 Tejun Heo 提交于
Conflicts: arch/sparc/kernel/smp_64.c arch/x86/kernel/cpu/perf_counter.c arch/x86/kernel/setup_percpu.c drivers/cpufreq/cpufreq_ondemand.c mm/percpu.c Conflicts in core and arch percpu codes are mostly from commit ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many num_possible_cpus() with nr_cpu_ids. As for-next branch has moved all the first chunk allocators into mm/percpu.c, the changes are moved from arch code to mm/percpu.c. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Amerigo Wang 提交于
get_vm_area() only accepts VM_* flags, not GFP_*. And according to the doc of get_vm_area(), here should be VM_ALLOC. Signed-off-by: NWANG Cong <amwang@redhat.com> Acked-by: NTejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
percpu code has been assuming num_possible_cpus() == nr_cpu_ids which is incorrect if cpu_possible_map contains holes. This causes percpu code to access beyond allocated memories and vmalloc areas. On a sparc64 machine with cpus 0 and 2 (u60), this triggers the following warning or fails boot. WARNING: at /devel/tj/os/work/mm/vmalloc.c:106 vmap_page_range_noflush+0x1f0/0x240() Modules linked in: Call Trace: [00000000004b17d0] vmap_page_range_noflush+0x1f0/0x240 [00000000004b1840] map_vm_area+0x20/0x60 [00000000004b1950] __vmalloc_area_node+0xd0/0x160 [0000000000593434] deflate_init+0x14/0xe0 [0000000000583b94] __crypto_alloc_tfm+0xd4/0x1e0 [00000000005844f0] crypto_alloc_base+0x50/0xa0 [000000000058b898] alg_test_comp+0x18/0x80 [000000000058dad4] alg_test+0x54/0x180 [000000000058af00] cryptomgr_test+0x40/0x60 [0000000000473098] kthread+0x58/0x80 [000000000042b590] kernel_thread+0x30/0x60 [0000000000472fd0] kthreadd+0xf0/0x160 ---[ end trace 429b268a213317ba ]--- This patch fixes generic percpu functions and sparc64 setup_per_cpu_areas() so that they handle sparse cpu_possible_map properly. Please note that on x86, cpu_possible_map() doesn't contain holes and thus num_possible_cpus() == nr_cpu_ids and this patch doesn't cause any behavior difference. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
nr_cpu_ids is dependent only on cpu_possible_map and setup_per_cpu_areas() already depends on cpu_possible_map and will use nr_cpu_ids. Initialize nr_cpu_ids before setting up percpu areas. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
free_irq() can remove an irqaction while the corresponding interrupt is in progress, but free_irq() sets action->thread to NULL unconditionally, which might lead to a NULL pointer dereference in handle_IRQ_event() when the hard interrupt context tries to wake up the handler thread. Prevent this by moving the thread stop after synchronize_irq(). No need to set action->thread to NULL either as action is going to be freed anyway. This fixes a boot crash reported against preempt-rt which uses the mainline irq threads code to implement full irq threading. [ tglx: removed local irqthread variable ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Linus Torvalds 提交于
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_counter: Report the cloning task as parent on perf_counter_fork() perf_counter: Fix an ipi-deadlock perf: Rework/fix the whole read vs group stuff perf_counter: Fix swcounter context invariance perf report: Don't show unresolved DSOs and symbols when -S/-d is used perf tools: Add a general option to enable raw sample records perf tools: Add a per tracepoint counter attribute to get raw sample perf_counter: Provide hw_perf_counter_setup_online() APIs perf list: Fix large list output by using the pager perf_counter, x86: Fix/improve apic fallback perf record: Add missing -C option support for specifying profile cpu perf tools: Fix dso__new handle() to handle deleted DSOs perf tools: Fix fallback to cplus_demangle() when bfd_demangle() is not available perf report: Show the tid too in -D perf record: Fix .tid and .pid fill-in when synthesizing events perf_counter, x86: Fix generic cache events on P6-mobile CPUs perf_counter, x86: Fix lapic printk message
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Fix handling of bad requeue syscall pairing futex: Fix compat_futex to be same as futex for REQUEUE_PI locking, sched: Give waitqueue spinlocks their own lockdep classes futex: Update futex_q lock_ptr on requeue proxy lock
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix oops in identify_cpu() on CPUs without CPUID x86: Clear incorrectly forced X86_FEATURE_LAHF_LM flag x86, mce: therm_throt - change when we print messages x86: Add reboot quirk for every 5 series MacBook/Pro
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (22 commits) ocfs2: Fix possible deadlock when extending quota file ocfs2: keep index within status_map[] ocfs2: Initialize the cluster we're writing to in a non-sparse extend ocfs2: Remove redundant BUG_ON in __dlm_queue_ast() ocfs2/quota: Release lock for error in ocfs2_quota_write. ocfs2: Define credit counts for quota operations ocfs2: Remove syncjiff field from quota info ocfs2: Fix initialization of blockcheck stats ocfs2: Zero out padding of on disk dquot structure ocfs2: Initialize blocks allocated to local quota file ocfs2: Mark buffer uptodate before calling ocfs2_journal_access_dq() ocfs2: Make global quota files blocksize aligned ocfs2: Use ocfs2_rec_clusters in ocfs2_adjust_adjacent_records. ocfs2: Fix deadlock on umount ocfs2: Add extra credits and access the modified bh in update_edge_lengths. ocfs2: Fail ocfs2_get_block() immediately when a block needs allocation ocfs2: Fix error return in ocfs2_write_cluster() ocfs2: Fix compilation warning for fs/ocfs2/xattr.c ocfs2: Initialize count in aio_write before generic_write_checks ocfs2: log the actual return value of ocfs2_file_aio_write() ...
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: allow upper limit for resync/reshape to be set when array is read-only md/raid5: Properly remove excess drives after shrinking a raid5/6 md/raid5: make sure a reshape restarts at the correct address. md/raid5: allow new reshape modes to be restarted in the middle. md: never advance 'events' counter by more than 1. Remove deadlock potential in md_open
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: fix i2c init order on ap325rxa V2 sh: fix i2c init order on Migo-R V2 sh: convert processor device setup functions to arch_initcall()
-
由 Linus Torvalds 提交于
kernel_sendpage() does the proper default case handling for when the socket doesn't have a native sendpage implementation. Now, arguably this might be something that we could instead solve by just specifying that all protocols should do it themselves at the protocol level, but we really only care about the common protocols. Does anybody really care about sendpage on something like Appletalk? Not likely. Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NJulien TINNES <julien@cr0.org> Acked-by: NTavis Ormandy <taviso@sdf.lonestar.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 8月, 2009 8 次提交
-
-
由 Peter Zijlstra 提交于
A bug in (9f498cc5: perf_counter: Full task tracing) makes profiling multi-threaded apps it go belly up. [ output as: (PID:TID):(PPID:PTID) ] # ./perf report -D | grep FORK 0x4b0 [0x18]: PERF_EVENT_FORK: (3237:3237):(3236:3236) 0xa10 [0x18]: PERF_EVENT_FORK: (3237:3238):(3236:3236) 0xa70 [0x18]: PERF_EVENT_FORK: (3237:3239):(3236:3236) 0xad0 [0x18]: PERF_EVENT_FORK: (3237:3240):(3236:3236) 0xb18 [0x18]: PERF_EVENT_FORK: (3237:3241):(3236:3236) Shows us that the test (27d028de perf report: Update for the new FORK/EXIT events) in builtin-report.c: /* * A thread clone will have the same PID for both * parent and child. */ if (thread == parent) return 0; Will clearly fail. The problem is that perf_counter_fork() reports the actual parent, instead of the cloning thread. Fixing that (with the below patch), yields: # ./perf report -D | grep FORK 0x4c8 [0x18]: PERF_EVENT_FORK: (1590:1590):(1589:1589) 0xbd8 [0x18]: PERF_EVENT_FORK: (1590:1591):(1590:1590) 0xc80 [0x18]: PERF_EVENT_FORK: (1590:1592):(1590:1590) 0x3338 [0x18]: PERF_EVENT_FORK: (1590:1593):(1590:1590) 0x66b0 [0x18]: PERF_EVENT_FORK: (1590:1594):(1590:1590) Which both makes more sense and doesn't confuse perf report anymore. Reported-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: paulus@samba.org Cc: Anton Blanchard <anton@samba.org> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1250172882.5241.62.camel@twins> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
perf_pending_counter() is called from IRQ context and will call perf_counter_disable(), however perf_counter_disable() uses smp_call_function_single() which doesn't fancy being used with IRQs disabled due to IPI deadlocks. Fix this by making it use the local __perf_counter_disable() call and teaching the counter_sched_out() code about pending disables as well. This should cover the case where a counter migrates before the pending queue gets processed. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey J Ashford <cjashfor@us.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> LKML-Reference: <20090813103655.244097721@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Replace PERF_SAMPLE_GROUP with PERF_SAMPLE_READ and introduce PERF_FORMAT_GROUP to deal with group reads in a more generic way. This allows you to get group reads out of read() as well. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey J Ashford <cjashfor@us.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> LKML-Reference: <20090813103655.117411814@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
perf_swcounter_is_counting() uses a lock, which means we cannot use swcounters from NMI or when holding that particular lock, this is unintended. The below removes the lock, this opens up race window, but not worse than the swcounters already experience due to RCU traversal of the context in perf_swcounter_ctx_event(). This also fixes the hard lockups while opening a lockdep tracepoint counter. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: stephane eranian <eranian@googlemail.com> Cc: Corey J Ashford <cjashfor@us.ibm.com> LKML-Reference: <1250149915.10001.66.camel@twins> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arnaldo Carvalho de Melo 提交于
We're interested in just those symbols/DSOs, so filter out the unresolved ones. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20090812211957.GE3495@ghostprotocols.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
While we can enable the perf sample records per tracepoint counter, we may also want to enable this option for every tracepoint counters to open, so that we don't need to add a :record flag for all of them. Add the -R, --raw-samples options for this purpose. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250152039-7284-2-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Frederic Weisbecker 提交于
Add a new flag field while opening a tracepoint perf counter: -e tracepoint_subsystem:tracepoint_name:flags This is intended to be generic although for now it only supports the r[e[c[o[r[d]]]]] flag: ./perf record -e workqueue:workqueue_insertion:record ./perf record -e workqueue:workqueue_insertion:r will have the same effect: enabling the raw samples record for the given tracepoint counter. In the future, we may want to support further flags, separated by commas. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250152039-7284-1-git-send-email-fweisbec@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Provide weak aliases for hw_perf_counter_setup_online(). This is used by the BTS patches (for v2.6.32), but it interacts with fixes so propagate this upstream. (it has no effect as of yet) Also export perf_counter_output() to architecture code. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-