- 15 7月, 2005 2 次提交
-
-
Russell King <rmk+lkml@arm.linux.org.uk> This construct is refused by GCC 4, so here's the (corrected) fix. Thanks to Russell for noticing a stupid mistake I did when first sending this. As he noted, the code is largely suboptimal however it currently works, and will be fixed shortly. Just read the access_ok check on fp which is NULL, or the pointer arithmetic below which should be done with a cast to void*: frame = (struct rt_sigframe __user *) round_down(stack_top - sizeof(struct rt_sigframe), 16) - 8; The code shows clearly that has been taken from arch/x86_64/kernel/signal.c:setup_rt_frame(), maybe in a bit of a hurry. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
Fix QAM lock bug. Previously, it was necessary to first scan in VSB before attempting to get a QAM lock. Signed-off-by: NMac Michaels <wmichaels1@earthlink.net> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 7月, 2005 22 次提交
-
-
由 Linus Torvalds 提交于
-
由 Miles Bader 提交于
Signed-off-by: NMiles Bader <miles@gnu.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Tony Luck 提交于
-
由 David Mosberger-Tang 提交于
Mark's patch added "attribute((packed))" for pcdp_uart, without accounting for the fact that the structure definition _relied_ on implicit padding by 6 bytes. Fix is to make the padding explicit. Signed-off-by: NDavid Mosberger-Tang <David.Mosberger@acm.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Dean Nelson 提交于
XPC calls smp_processor_id() twice from xpc_setup_infrastructure() with preemption enabled, which gets flagged if 'DEBUG_PREEMPT=y'. This patch replaces the two calls to smp_processor_id() by a single call to raw_smp_processor_id() since any CPU within the partition will do. Signed-off-by: NDean Nelson <dcn@sgi.com> Acked-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olof Johansson 提交于
Add PVR value and tests for 970MP. Also switch to a simpler (but slightly longer) check at init time for simplicity. Signed-off-by: NOlof Johansson <olof@austin.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Gibson 提交于
This patch removes the use of bitfield types from the ppc64 hash table manipulation code. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
make -j zImage may call if_changed twice at the same time, the result is a corrupted vmlinux.gz Write to a temporary file for the time being until someone with make skills fix the serialization properly. Signed-off-by: NOlaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: NTom Rini <trini@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Steve Dickson 提交于
Allow the setting of NLM timeouts and grace periods through the proc and sysclt interfaces on x86_64 architectures Signed-off-by: NSteve Dickson <steved@redhat.com> Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Schwidefsky 提交于
Add special case for the POSIX_FADV_DONTNEED and POSIX_FADV_NOREUSE hint values for s390-64. The user space values in the s390-64 glibc headers for these two defines have always been 6 and 7 instead of 4 and 5. All 64 bit applications therefore use the "wrong" values. To get these applications working without recompiling the kernel needs to accept the "wrong" values. Since the values for s390-31 are 4 and 5 the compat wrapper for fadvise64 and fadvise64_64 need to rewrite the values for 31 bit system calls. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Guillaume Autran 提交于
Fix for a race condition when a task gets preempted by another task while executing the destroy_context(...) in a FEW_CONTEXTS environment. mm->context == NO_CONTEXT but the context_map may indicate all contexts are in use. The solution to this problem is to disable kernel preemption while destroying a MMU context. Signed-off-by: NGuillaume Autran <gautran@mrv.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Altaparmakov 提交于
Something has changed in the core kernel such that we now get concurrent inode write outs, one e.g via pdflush and one via sys_sync or whatever. This causes a nasty deadlock in ntfs. The only clean solution unfortunately requires a minor vfs api extension. First the deadlock analysis: Prerequisive knowledge: NTFS has a file $MFT (inode 0) loaded at mount time. The NTFS driver uses the page cache for storing the file contents as usual. More interestingly this file contains the table of on-disk inodes as a sequence of MFT_RECORDs. Thus NTFS driver accesses the on-disk inodes by accessing the MFT_RECORDs in the page cache pages of the loaded inode $MFT. The situation: VFS inode X on a mounted ntfs volume is dirty. For same inode X, the ntfs_inode is dirty and thus corresponding on-disk inode, which is as explained above in a dirty PAGE_CACHE_PAGE belonging to the table of inodes ($MFT, inode 0). What happens: Process 1: sys_sync()/umount()/whatever... calls __sync_single_inode() for $MFT -> do_writepages() -> write_page for the dirty page containing the on-disk inode X, the page is now locked -> ntfs_write_mst_block() which clears PageUptodate() on the page to prevent anyone else getting hold of it whilst it does the write out (this is necessary as the on-disk inode needs "fixups" applied before the write to disk which are removed again after the write and PageUptodate is then set again). It then analyses the page looking for dirty on-disk inodes and when it finds one it calls ntfs_may_write_mft_record() to see if it is safe to write this on-disk inode. This then calls ilookup5() to check if the corresponding VFS inode is in icache(). This in turn calls ifind() which waits on the inode lock via wait_on_inode whilst holding the global inode_lock. Process 2: pdflush results in a call to __sync_single_inode for the same VFS inode X on the ntfs volume. This locks the inode (I_LOCK) then calls write-inode -> ntfs_write_inode -> map_mft_record() -> read_cache_page() of the page (in page cache of table of inodes $MFT, inode 0) containing the on-disk inode. This page has PageUptodate() clear because of Process 1 (see above) so read_cache_page() blocks when tries to take the page lock for the page so it can call ntfs_read_page(). Thus Process 1 is holding the page lock on the page containing the on-disk inode X and it is waiting on the inode X to be unlocked in ifind() so it can write the page out and then unlock the page. And Process 2 is holding the inode lock on inode X and is waiting for the page to be unlocked so it can call ntfs_readpage() or discover that Process 1 set PageUptodate() again and use the page. Thus we have a deadlock due to ifind() waiting on the inode lock. The only sensible solution: NTFS does not care whether the VFS inode is locked or not when it calls ilookup5() (it doesn't use the VFS inode at all, it just uses it to find the corresponding ntfs_inode which is of course attached to the VFS inode (both are one single struct); and it uses the ntfs_inode which is subject to its own locking so I_LOCK is irrelevant) hence we want a modified ilookup5_nowait() which is the same as ilookup5() but it does not wait on the inode lock. Without such functionality I would have to keep my own ntfs_inode cache in the NTFS driver just so I can find ntfs_inodes independent of their VFS inodes which would be slow, memory and cpu cycle wasting, and incredibly stupid given the icache already exists in the VFS. Below is a patch that does the ilookup5_nowait() implementation in fs/inode.c and exports it. ilookup5_nowait.diff: Introduce ilookup5_nowait() which is basically the same as ilookup5() but it does not wait on the inode's lock (i.e. it omits the wait_on_inode() done in ifind()). This is needed to avoid a nasty deadlock in NTFS. Signed-off-by: NAnton Altaparmakov <aia21@cantab.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Robert Love 提交于
Really simple, basic cleanup. Signed-off-by: NRobert Love <rml@novell.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Robert Love 提交于
This rearranges the event ordering for "open" to be consistent with the ordering of the other events. Signed-off-by: NRobert Love <rml@novell.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Robert Love 提交于
This moves the inotify sysctl knobs to "/proc/sys/fs/inotify" from "/proc/sys/fs". Also some related cleanup. Signed-off-by: NRobert Love <rml@novell.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 James Bottomley 提交于
This patch: [PATCH] Remove i386_ksyms.c, almost made files like smp.c do their own EXPORT_SYMBOLS. This means that all subarchitectures that override these symbols now have to do the exports themselves. This patch adds the exports for voyager (which is the most affected since it has a separate smp harness). However, someone should audit all the other subarchitectures to see if any others got broken. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Jeff Mahoney 提交于
When I recently submitted a Lindent patch, it turned out that my .indent.pro options were also applied to the tree. This patch directs indent(1) to ignore the .indent.pro directives and only use options specified on the command line. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Joern Engel 提交于
Signed-off-by: NJoern Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 13 7月, 2005 16 次提交
-
-
由 Ian Dall 提交于
It turns out this is due to some inverted logic in xattr.c Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
-
由 Dave Kleikamp 提交于
All of the different xattr namespaces have different rules. user.* and ACL's are not allowed on symlinks, and since these were the first xattrs implemented, I assumed there was no need to support xattrs on symlinks. This one-line patch should fix it. Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
-
由 Dave Kleikamp 提交于
Signed-off-by: NDave Kleikamp <shaggy@austin.ibm.com>
-
-
由 Linus Torvalds 提交于
Yeah, this time hopefully I'm not confusing the version numbers. The last release was -rc2, _this_ is -rc3.
-
由 Robert Love 提交于
inotify is intended to correct the deficiencies of dnotify, particularly its inability to scale and its terrible user interface: * dnotify requires the opening of one fd per each directory that you intend to watch. This quickly results in too many open files and pins removable media, preventing unmount. * dnotify is directory-based. You only learn about changes to directories. Sure, a change to a file in a directory affects the directory, but you are then forced to keep a cache of stat structures. * dnotify's interface to user-space is awful. Signals? inotify provides a more usable, simple, powerful solution to file change notification: * inotify's interface is a system call that returns a fd, not SIGIO. You get a single fd, which is select()-able. * inotify has an event that says "the filesystem that the item you were watching is on was unmounted." * inotify can watch directories or files. Inotify is currently used by Beagle (a desktop search infrastructure), Gamin (a FAM replacement), and other projects. See Documentation/filesystems/inotify.txt. Signed-off-by: NRobert Love <rml@novell.com> Cc: John McCutchan <ttb@tentacle.dhs.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This was a pure indentation change, using: scripts/Lindent fs/reiserfs/*.c include/linux/reiserfs_*.h to make reiserfs match the regular Linux indentation style. As Jeff Mahoney <jeffm@suse.com> writes: The ReiserFS code is a mix of a number of different coding styles, sometimes different even from line-to-line. Since the code has been relatively stable for quite some time and there are few outstanding patches to be applied, it is time to reformat the code to conform to the Linux style standard outlined in Documentation/CodingStyle. This patch contains the result of running scripts/Lindent against fs/reiserfs/*.c and include/linux/reiserfs_*.h. There are places where the code can be made to look better, but I'd rather keep those patches separate so that there isn't a subtle by-hand hand accident in the middle of a huge patch. To be clear: This patch is reformatting *only*. A number of patches may follow that continue to make the code more consistent with the Linux coding style. Hans wasn't particularly enthusiastic about these patches, but said he wouldn't really oppose them either. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Mahoney 提交于
indent(1) doesn't know how to handle the "do not compile" error. It results in the item_ops array declaration being indented a tab stop in when it should not be. This patch replaces it with a #error that describes why it's failing. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
Handle writes to a snapshot-origin device that has been extended since the snapshot was taken. Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
Fix dm_swap_table() __bind error cases: a missing unlock, and EINVAL preferable to EPERM. Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
Prevent more than one priority group initialisation function from being outstanding at once. Otherwise the completion functions interfere with each other. Also, reloading the table could reference a freed pointer. Only reset queue_io in pg_init_complete if another pg_init isn't required. Skip process_queued_ios if the queue is empty so that we only trigger a pg_init if there's I/O. Signed-off-by: NLars Marowsky-Bree <lmb@suse.de> Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
To avoid deadlock when suspending a multipath device after all its paths have failed, stop queueing any I/O that is about to fail *before* calling freeze_bdev instead of after. Instead of setting a multipath 'suspended' flag which would have to be reset if an error occurs during the process, save the previous queueing state and leave userspace to restore if it wishes. Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
The multipath destructor must flush its workqueue. Otherwise items that reference the destroyed object could remain. From: "goggin, edward" <egoggin@emc.com> Signed-off-by: NLars Marowsky-Bree <lmb@suse.de> Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alasdair G Kergon 提交于
dm multipath will report barriers as not supported with this patch. Signed-off-by: NLars Marowsky-Bree <lmb@suse.de> Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
The Altix subarch does not provide node information via ACPI. Instead hooks are used to fixup pci structures. This patch determines the nodes for Altix PCI busses. Remote Bridges: --------------- Altix supports remote I/O nodes without memory or processors but with bridges. The TIOCA type of bridge is an AGP bridge and the PROM provides information about the closest node. That information will be returned by pcibus_to_node. The TIOCP remote bridge type is a PCI bridge but the PROM does not provide a closest node id. pcibus_to_node will return -1 for devices on those bridges meaning that device control structures may be allocated on any node. Safeguard: ---------- Should the fixups result in invalid node information for a pci controller then a warning will be printed and pcibus_to_node will return -1. This patch also fixes the "FIXME" in sn_dma_alloc_coherent. This means that dma_alloc_coherent will now use alloc_pages_node to allocate memory local to the node that the PCI device is connected to. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
-