- 13 2月, 2018 18 次提交
-
-
由 Kirill Tkhai 提交于
net_sem protects from pernet_list changing, while ops_free_list() makes simple kfree(), and it can't race with other pernet_operations callbacks. So we may release net_mutex earlier then it was. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Acked-by: NAndrei Vagin <avagin@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
Currently, the mutex is mostly used to protect pernet operations list. It orders setup_net() and cleanup_net() with parallel {un,}register_pernet_operations() calls, so ->exit{,batch} methods of the same pernet operations are executed for a dying net, as were used to call ->init methods, even after the net namespace is unlinked from net_namespace_list in cleanup_net(). But there are several problems with scalability. The first one is that more than one net can't be created or destroyed at the same moment on the node. For big machines with many cpus running many containers it's very sensitive. The second one is that it's need to synchronize_rcu() after net is removed from net_namespace_list(): Destroy net_ns: cleanup_net() mutex_lock(&net_mutex) list_del_rcu(&net->list) synchronize_rcu() <--- Sleep there for ages list_for_each_entry_reverse(ops, &pernet_list, list) ops_exit_list(ops, &net_exit_list) list_for_each_entry_reverse(ops, &pernet_list, list) ops_free_list(ops, &net_exit_list) mutex_unlock(&net_mutex) This primitive is not fast, especially on the systems with many processors and/or when preemptible RCU is enabled in config. So, all the time, while cleanup_net() is waiting for RCU grace period, creation of new net namespaces is not possible, the tasks, who makes it, are sleeping on the same mutex: Create net_ns: copy_net_ns() mutex_lock_killable(&net_mutex) <--- Sleep there for ages I observed 20-30 seconds hangs of "unshare -n" on ordinary 8-cpu laptop with preemptible RCU enabled after CRIU tests round is finished. The solution is to convert net_mutex to the rw_semaphore and add fine grain locks to really small number of pernet_operations, what really need them. Then, pernet_operations::init/::exit methods, modifying the net-related data, will require down_read() locking only, while down_write() will be used for changing pernet_list (i.e., when modules are being loaded and unloaded). This gives signify performance increase, after all patch set is applied, like you may see here: %for i in {1..10000}; do unshare -n bash -c exit; done *before* real 1m40,377s user 0m9,672s sys 0m19,928s *after* real 0m17,007s user 0m5,311s sys 0m11,779 (5.8 times faster) This patch starts replacing net_mutex to net_sem. It adds rw_semaphore, describes the variables it protects, and makes to use, where appropriate. net_mutex is still present, and next patches will kick it out step-by-step. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Acked-by: NAndrei Vagin <avagin@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
Line up destructors actions in the revers order to constructors. Next patches will add more actions, and this will be comfortable, if there is the such order. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Acked-by: NAndrei Vagin <avagin@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kirill Tkhai 提交于
This patch merges two repeating pieces of code in one, and they will live in setup_net() now. The only change is that assignment: init_net_initialized = true; becomes reordered with: list_add_tail_rcu(&net->list, &net_namespace_list); The order does not have visible effect, and it is a simple cleanup because of: init_net_initialized is used in !CONFIG_NET_NS case to order proc_net_ns_ops registration occuring at boot time: start_kernel()->proc_root_init()->proc_net_init(), with net_ns_init()->setup_net(&init_net, &init_user_ns) also occuring in boot time from the same init_task. When there are no another tasks to race with them, for the single task it does not matter, which order two sequential independent loads should be made. So we make them reordered. Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Acked-by: NAndrei Vagin <avagin@virtuozzo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-02-12 This series contains updates to i40e and i40evf. Alan fixes a spelling mistake in code comments. Fixes an issue on older firmware versions or NPAR enabled PFs which do not support the I40E_FLAG_DISABLE_FW_LLDP flag and would get into a situation where any attempt to change any priv flag would be forbidden. Alex got busy with the ITR code and made several cleanups and fixes so that we can more easily understand what is going on. The fixes included a computational fix when determining the register offset, as well as a fix for unnecessarily toggling the CLEARPBA bit which could lead to potential lost events if auto-masking is not enabled. Filip adds a necessary delay to recover after a EMP reset when using firmware version 4.33. Paweł adds a warning message for MFP devices when the link-down-on-close flag is set because it may affect other partitions. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch replaces the existing mechanism for determining the correct value to program for adaptive ITR with yet another new and more complicated approach. The basic idea from a 30K foot view is that this new approach will push the Rx interrupt moderation up so that by default it starts in low latency and is gradually pushed up into a higher latency setup as long as doing so increases the number of packets processed, if the number of packets drops to 4 to 1 per packet we will reset and just base our ITR on the size of the packets being received. For Tx we leave it floating at a high interrupt delay and do not pull it down unless we start processing more than 112 packets per interrupt. If we start exceeding that we will cut our interrupt rates in half until we are back below 112. The side effect of these patches are that we will be processing more packets per interrupt. This is both a good and a bad thing as it means we will not be blocking processing in the case of things like pktgen and XDP, but we will also be consuming a bit more CPU in the cases of things such as network throughput tests using netperf. One delta from this versus the ixgbe version of the changes is that I have made the interrupt moderation a bit more aggressive when we are in bulk mode by moving our "goldilocks zone" up from 48 to 96 to 56 to 112. The main motivation behind moving this is to address the fact that we need to update less frequently, and have more fine grained control due to the separate Tx and Rx ITR times. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch is mostly prep-work for replacing the current approach to programming the dynamic aka adaptive ITR. Specifically here what we are doing is splitting the Tx and Rx ITR each into two separate values. The first value current_itr represents the current value of the register. The second value target_itr represents the desired value of the register. The general plan by doing this is to allow for deferring the update of the ITR value under certain circumstances. For now we will work with what we have, but in the future I hope to change the behavior so that we always only update one ITR at a time using some simple logic to determine which ITR requires an update. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
While testing code for the recent ITR changes I found that updating the Tx ITR appeared to have no effect with everything defaulting to the Rx ITR. A bit of digging narrowed it down the fact that we were asking the PF to associate all causes with ITR 0 as we weren't populating the itr_idx values for either Rx or Tx. To correct it I have added the configuration for these values to this patch. In addition I did some minor clean-up to just add a local pointer for the vector map instead of dereferencing it based off of the index repeatedly. In my opinion this makes the resultant code a bit more readable and saves us a few characters. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
Instead of using the register value for the defines when setting up the ring ITR we can just use the actual values and avoid the use of shifts and macros to translate between the values we have and the values we want. This helps to make the code more readable as we can quickly translate from one value to the other. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Denys Vlasenko 提交于
Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The CLEARPBA bit in the dynamic interrupt control register actually has no effect either way on the hardware. As per errata 28 in the XL710 specification update the interrupt is actually cleared any time the register is written with the INTENA_MSK bit set to 0. As such the act of toggling the enable bit actually will trigger the interrupt being cleared and could lead to potential lost events if auto-masking is not enabled. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch is a further clean-up related to the change over to using q_vector->reg_idx when accessing the ITR registers. Specifically the code appears to have several other spots where we were computing the register offset manually and this resulted in errors in a few spots. Specifically in the i40evf functions for mapping queues to vectors it appears we may have had an off by 1 error since (v_idx - 1) for the first q_vector with an index of 0 would result in us returning -1 if I am not mistaken. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alan Brady 提交于
Currently in i40e_set_priv_flags we use new_flags to check for the I40E_FLAG_DISABLE_FW_LLDP flag. This is an issue for a few a reasons. DISABLE_FW_LLDP is persistent across reboots/driver reloads. This means we need some way to detect if FW LLDP is enabled on init. We do this by trying to init_dcb and if it fails with EPERM we know LLDP is disabled in FW. This could be a problem on older FW versions or NPAR enabled PFs because there are situations where the FW could disable LLDP, but they do _not_ support using this flag to change it. If we do end up in this situation, the flag will be set, then when the user tries to change any priv flags, the driver thinks the user is trying to disable FW LLDP on a FW that doesn't support it and essentially forbids any priv flag changes. The fix is simple, instead of checking if this flag is set, we should be checking if the user is trying to _change_ the flag on unsupported FW versions. This patch also adds a comment explaining that the cmpxchg is the point of no return. Once we put the new flags into pf->flags we can't back out. Signed-off-by: NAlan Brady <alan.brady@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Paweł Jabłoński 提交于
This patch adds a warning message when the link-down-on-close flag is setting on. The warning is printed only on MFP devices Signed-off-by: NPaweł Jabłoński <pawel.jablonski@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Filip Sadowski 提交于
This patch adds necessary delay for 4.33 firmware to recover after EMP reset. Without this patch driver occasionally reinitializes structures too quickly to communicate with firmware after EMP reset causing AdminQ to timeout. Signed-off-by: NFilip Sadowski <filip.sadowski@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
The logic for dynamic ITR update is confusing at best as there were odd paths chosen for how to find the rings associated with a given queue based on the vector index and other inconsistencies throughout the code. This patch is an attempt to clean up the logic so that we can more easily understand what is going on. Specifically if there is a Rx or Tx ring that is enabled in dynamic mode on the q_vector it is allowed to override the other side of the interrupt moderation. While it isn't correct all this patch is doing is cleaning up the logic for now so that when we come through and fix it we can more easily identify that this is wrong. The other big change made here is that we replace references to: vsi->rx_rings[q_vector->v_idx]->itr_setting with: q_vector->rx.ring->itr_setting The general idea is we can avoid the long pointer chase since just accessing q_vector->rx.ring is a single pointer access versus having to chase down vsi->rx_rings, and then finding the pointer in the array, and finally chasing down the itr_setting from there. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
The rings are already split out into Tx and Rx rings so it doesn't make sense to have any single ring store both a Tx and Rx itr_setting value. Since that is the case drop the pair in favor of storing just a single ITR value. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alan Brady 提交于
'bufer' should be 'buffer' Signed-off-by: NAlan Brady <alan.brady@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 12 2月, 2018 7 次提交
-
-
由 Linus Torvalds 提交于
-
由 Al Viro 提交于
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
-
git://github.com/jcmvbkbc/linux-xtensa由 Linus Torvalds 提交于
Pull xtense fix from Max Filippov: "Build fix for xtensa architecture with KASAN enabled" * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build with KASAN
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2由 Linus Torvalds 提交于
Pull nios2 update from Ley Foon Tan: - clean up old Kconfig options from defconfig - remove leading 0x and 0s from bindings notation in dts files * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: defconfig: Cleanup from old Kconfig options nios2: dts: Remove leading 0x and 0s from bindings notation
-
由 Max Filippov 提交于
The commit 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") removed KASAN_SHADOW_SCALE_SHIFT definition from include/linux/kasan.h and added it to architecture-specific headers, except for xtensa. This broke the xtensa build with KASAN enabled. Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h Reported by: kbuild test robot <fengguang.wu@intel.com> Fixes: 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") Acked-by: NAndrey Konovalov <andreyknvl@google.com> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
-
- 11 2月, 2018 8 次提交
-
-
由 Krzysztof Kozlowski 提交于
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae ("ipv4: Remove inet_lro library"). Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org> Acked-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
由 Mathieu Malaterre 提交于
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: NDavid Daney <ddaney@caviumnetworks.com> Suggested-by: NRob Herring <robh@kernel.org> Signed-off-by: NMathieu Malaterre <malat@debian.org> Acked-by: NLey Foon Tan <ley.foon.tan@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fix from Bjorn Helgaas: "Fix a POWER9/powernv INTx regression from the merge window (Alexey Kardashevskiy)" * tag 'pci-v4.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: powerpc/pci: Fix broken INTx configuration via OF
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "A few fixes to round off the merge window on the block side: - a set of bcache fixes by way of Michael Lyle, from the usual bcache suspects. - add a simple-to-hook-into function for bpf EIO error injection. - fix blk-wbt that mischarectized flushes as reads. Improve the logic so that flushes and writes are accounted as writes, and only reads as reads. From me. - fix requeue crash in BFQ, from Paolo" * tag 'for-linus-20180210' of git://git.kernel.dk/linux-block: block, bfq: add requeue-request hook bcache: fix for data collapse after re-attaching an attached device bcache: return attach error when no cache set exist bcache: set writeback_rate_update_seconds in range [1, 60] seconds bcache: fix for allocator and register thread race bcache: set error_limit correctly bcache: properly set task state in bch_writeback_thread() bcache: fix high CPU occupancy during journal bcache: add journal statistic block: Add should_fail_bio() for bpf error injection blk-wbt: account flush requests correctly
-
git://github.com/dvhart/linux-pdx86由 Linus Torvalds 提交于
Pull x86 platform driver updates from Darren Hart: "Mellanox fixes and new system type support. Mostly data for new system types with a correction and an uninitialized variable fix" [ Pulling from github because git.infradead.org currently seems to be down for some reason, but Darren had a backup location - Linus ] * tag 'platform-drivers-x86-v4.16-3' of git://github.com/dvhart/linux-pdx86: platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems platform/x86: mlx-platform: Add support for new msn201x system type platform/x86: mlx-platform: Add support for new msn274x system type platform/x86: mlx-platform: Fix power cable setting for msn21xx family platform/x86: mlx-platform: Add define for the negative bus platform/x86: mlx-platform: Use defines for bus assignment platform/mellanox: mlxreg-hotplug: Fix uninitialized variable
-
由 Linus Torvalds 提交于
Merge tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - move cros_ec_dev to drivers/mfd - other small maintenance fixes [ The cros_ec_dev movement came in earlier through the MFD tree - Linus ] * tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: platform/chrome: Use proper protocol transfer function platform/chrome: cros_ec_lpc: Add support for Google Glimmer platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing. platform/chrome: cros_ec_lpc: remove redundant pointer request cros_ec: fix nul-termination for firmware build info platform/chrome: chromeos_laptop: make chromeos_laptop const
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...
-
由 Alexey Kardashevskiy 提交于
59f47eff ("powerpc/pci: Use of_irq_parse_and_map_pci() helper") replaced of_irq_parse_pci() + irq_create_of_mapping() with of_irq_parse_and_map_pci(), but neglected to capture the virq returned by irq_create_of_mapping(), so virq remained zero, which caused INTx configuration to fail. Save the virq value returned by of_irq_parse_and_map_pci() and correct the virq declaration to match the of_irq_parse_and_map_pci() signature. Fixes: 59f47eff "powerpc/pci: Use of_irq_parse_and_map_pci() helper" Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru> [bhelgaas: changelog] Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 10 2月, 2018 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild由 Linus Torvalds 提交于
Pull more Kbuild updates from Masahiro Yamada: "Makefile changes: - enable unused-variable warning that was wrongly disabled for clang Kconfig changes: - warn about blank 'help' and fix existing instances - fix 'choice' behavior to not write out invisible symbols - fix misc weirdness Coccinell changes: - fix false positive of free after managed memory alloc detection - improve performance of NULL dereference detection" * tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits) kconfig: remove const qualifier from sym_expand_string_value() kconfig: add xrealloc() helper kconfig: send error messages to stderr kconfig: echo stdin to stdout if either is redirected kconfig: remove check_stdin() kconfig: remove 'config*' pattern from .gitignnore kconfig: show '?' prompt even if no help text is available kconfig: do not write choice values when their dependency becomes n coccinelle: deref_null: avoid useless computation coccinelle: devm_free: reduce false positives kbuild: clang: disable unused variable warnings only when constant kconfig: Warn if help text is blank nios2: kconfig: Remove blank help text arm: vt8500: kconfig: Remove blank help text MIPS: kconfig: Remove blank help text MIPS: BCM63XX: kconfig: Remove blank help text lib/Kconfig.debug: Remove blank help text Staging: rtl8192e: kconfig: Remove blank help text Staging: rtl8192u: kconfig: Remove blank help text mmc: kconfig: Remove blank help text ...
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull misc vfs fixes from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: seq_file: fix incomplete reset on read from zero offset kernfs: fix regression in kernfs_fop_write caused by wrong type
-
由 Masahiro Yamada 提交于
This function returns realloc'ed memory, so the returned pointer must be passed to free() when done. So, 'const' qualifier is odd. It is allowed to modify the expanded string. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
We already have xmalloc(), xcalloc(). Add xrealloc() as well to save tedious error handling. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Vadim Pasternak 提交于
It adds support for new Mellanox system types of basic classes qmb7, sn34, sn37, containing systems QMB700 (40x200GbE InfiniBand switch), SN3700 (32x200GbE and 16x400GbE Ethernet switch) and SN3410 (6x400GbE plus 48x50GbE Ethernet switch). These are the Top of the Rack systems, equipped with Mellanox COM-Express carrier board and switch board with Mellanox Quantum device, which supports InfiniBand switching with 40X200G ports and line rate of up to HDR speed or with Mellanox Spectrum-2 device, which supports Ethernet switching with 32X200G ports line rate of up to HDR speed. Signed-off-by: NVadim Pasternak <vadimp@mellanox.com> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-
由 Vadim Pasternak 提交于
It adds support for new Mellanox system types of basic half unit size class msn201x, containing system MSN2010 (18x10GbE plus 4x4x25GbE) half and its derivatives. This is the Top of the Rack system, equipped with Mellanox Small Form Factor carrier board and switch board with Mellanox Spectrum device, which supports Ethernet switching with 32X100G ports line rate of up to EDR speed. Signed-off-by: NVadim Pasternak <vadimp@mellanox.com> Signed-off-by: NDarren Hart (VMware) <dvhart@infradead.org>
-