- 15 1月, 2011 2 次提交
-
-
由 Daniel Hellstrom 提交于
When NAPI is disabled there is no point in having IRQs enabled, TX/RX should be off before clearing the TX/RX descriptor rings. Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Hellstrom 提交于
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 9月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 8月, 2010 1 次提交
-
-
由 Tobias Klauser 提交于
Use the return value provided by register_netdev on error instead of hard setting it to -ENOMEM. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 8月, 2010 1 次提交
-
-
由 Grant Likely 提交于
Commit id 1636f8ac (sparc/of: Move of_device fields into struct pdev_archdata) missed fixing up the n2_core.c and greth.c drivers. This patch makes the required changes. Reported-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 06 8月, 2010 1 次提交
-
-
由 Grant Likely 提交于
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Reviewed-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 6月, 2010 1 次提交
-
-
由 Tobias Klauser 提交于
The memory for the private data is allocated using kzalloc in alloc_etherdev (or alloc_netdev_mq respectively) so there is no need to set the napi member to 0 explicitely. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 5月, 2010 1 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 5月, 2010 1 次提交
-
-
由 Grant Likely 提交于
The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 04 4月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 3月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
eth_type_trans(skb, netdev) does the "skb->dev = netdev;" initialization, we can remove it from various network drivers. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 26 2月, 2010 2 次提交
-
-
由 Simon Horman 提交于
There doesn't seem to be any reason to explicitly return NETDEV_TX_OK as err is set to NETDEV_TX_OK in all cases that reach this point. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 kirjanov@gmail.com 提交于
Convert to netdev_tx_t Signed-off-by: NDenis Kirjanov <kirjanov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 2月, 2010 1 次提交
-
-
由 kirjanov@gmail.com 提交于
On Fri, Feb 19, 2010 at 13:51 +0100, Jiri Pirko wrote: > > <snip> > >>@@ -1031,7 +1029,7 @@ static void greth_set_multicast_list(struct net_device *dev) > >> return; > >> } > >> > >>- if (dev->mc_count == 0) { > >>+ if (!netdev_mc_count(dev)) { > also please use netdev_mc_empty() here. Some driver cleanups: * convert to use phy_find_first/phy_direct_connect * convert to use netdev_mc_* helpers * fixed missing validate_addr hook * removed netdev_priv castings Signed-off-by: NDenis Kirjanov <kirjanov@gmail.com> Reviewed-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 2月, 2010 1 次提交
-
-
由 Kristoffer Glembo 提交于
Adds device driver for Aeroflex Gaisler 10/100 and 10/100/1G Ethernet MAC IP cores. Signed-off-by: NKristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-