- 18 6月, 2012 1 次提交
-
-
由 Axel Lin 提交于
According to the datasheet: The LDO_CTRL registers are used to set the output voltage of LDO1 and LDO2. LDO_CTRL[7] and LDO_CTRL[3] are reserved and should always be written to 0. Thus the mask for TPS65023_LDO_1 and TPS65023_LDO_2 should be 0x07 and 0x70 respectively. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 4月, 2012 1 次提交
-
-
由 Axel Lin 提交于
All the drivers that need delay for the regulator voltage output voltage to stabilize after being enabled or after being set to a new value has been converted to implement enable_time and set_voltage_time_sel callbacks. Then regulator core will take care of the necessary delay. For the drivers that don't need the delay, don't need to include linux/delay.h. This patch removes the unneeded include of linux/delay.h in regulator drivers. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 17 4月, 2012 1 次提交
-
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 4月, 2012 1 次提交
-
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 4月, 2012 1 次提交
-
-
由 Mark Brown 提交于
Rather than adding new arguments to regulator_register() every time we want to add a new bit of dynamic information at runtime change the function to take these via a struct. By doing this we avoid needing to do further changes like the recent addition of device tree support which required each regulator driver to be updated to take an additional parameter. The regulator_desc which should (mostly) be static data is still passed separately as most drivers are able to configure this statically at build time. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 01 4月, 2012 2 次提交
-
-
由 Axel Lin 提交于
The client field of struct tps_pmic is not used after converting to regmap API. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
This patch also changes the define for TPS65023_LDO_CTRL_LDOx_MASK, because regmap_update_bits actually does: (orig & ~mask) | (val & mask) This change makes the code consists for all regmap_update_bits calls. Also removes some uninformative comments. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 07 2月, 2012 1 次提交
-
-
由 Axel Lin 提交于
This looks like a merge mistake. Calling regmap_update_bits once is enough. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 24 11月, 2011 1 次提交
-
-
由 Rajendra Nayak 提交于
With device tree support for regulators, its needed that the regulator_dev->dev device has the right of_node attached. To be able to do this add an additional parameter to the regulator_register() api, wherein the dt-adapted driver can then pass this additional info onto the regulator core. Signed-off-by: NRajendra Nayak <rnayak@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 11月, 2011 1 次提交
-
-
由 Jonghwan Choi 提交于
Current driver had the regmapcalls within the bodies of the driver specific read/write fuctions. This patch removes the original read/write functions and makes the call sites use regmap directly. Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 10月, 2011 1 次提交
-
-
由 H Hartley Sweeten 提交于
There are two sets of defines for the REG_CTRL2 bitfields and one of them has TPS65023_REG_CTRL2_DCDC1 defined incorrectly. Remove the duplicates and leave the correct one for TPS65023_REG_CTRL2_DCDC1. This fixes the following sparse warnings: drivers/regulator/tps65023-regulator.c:77:9: warning: preprocessor token TPS65023_REG_CTRL2_DCDC1 redefined drivers/regulator/tps65023-regulator.c:70:9: this was the original definition Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 29 8月, 2011 4 次提交
-
-
由 Marcus Folkesson 提交于
Defines a new voltage-table and allows registering of the tps65020 device. Signed-off-by: NMarcus Folkesson <marcus.folkesson@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Marcus Folkesson 提交于
TPS65023 is using VDCDC1 as core regulator and TPS65021 is using VDCDC3. Core-regulator and voltage-tables may differ between different regulators. These two is now passed as driver data. Signed-off-by: NMarcus Folkesson <marcus.folkesson@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Marcus Folkesson 提交于
Setting the GO bit in CTRL2 for updating the core voltage Signed-off-by: NMarcus Folkesson <marcus.folkesson@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Marcus Folkesson 提交于
Allow i2c core voltage adjustments by clearing CORE ADJ Allowed bit in CTRL2 Signed-off-by: NMarcus Folkesson <marcus.folkesson@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 09 8月, 2011 1 次提交
-
-
由 Marcus Folkesson 提交于
Allow i2c core voltage adjustments by clearing CORE ADJ Allowed bit in CTRL2 Signed-off-by: NMarcus Folkesson <marcus.folkesson@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 23 7月, 2011 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 27 5月, 2011 1 次提交
-
-
由 Axel Lin 提交于
The desc_id variable should not be a static variable. The rest of the code assumes the desc_id must less than TPSxxxxx_NUM_REGULATOR. If we set desc_id to be a static variable, checking the return value of rdev_get_id() may return error. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Cc: Anuj Aggarwal <anuj.aggarwal@ti.com> Cc: Graeme Gregory <gg@slimlogic.co.uk> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 12 1月, 2011 1 次提交
-
-
由 Mark Brown 提交于
Change the interface used by set_voltage() to report the selected value to the regulator core in terms of a selector used by list_voltage(). This allows the regulator core to know the voltage that was chosen without having to do an explict get_voltage(), which would be much more expensive as it will generally access hardware. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 11 8月, 2010 1 次提交
-
-
由 Marek Vasut 提交于
TPS65021 is an older model and is slightly weaker (can supply less current), otherwise is the same. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 03 6月, 2010 1 次提交
-
-
由 Wolfram Sang 提交于
I2C drivers can use the clientdata-pointer to point to private data. As I2C devices are not really unregistered, but merely detached from their driver, it used to be the drivers obligation to clear this pointer during remove() or a failed probe(). As a couple of drivers forgot to do this, it was agreed that it was cleaner if the i2c-core does this clearance when appropriate, as there is no guarantee for the lifetime of the clientdata-pointer after remove() anyhow. This feature was added to the core with commit e4a7b9b0 to fix the faulty drivers. As there is no need anymore to clear the clientdata-pointer, remove all current occurrences in the drivers to simplify the code and prevent confusion. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Acked-by: NRichard Purdie <rpurdie@linux.intel.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 03 3月, 2010 1 次提交
-
-
由 Dmitry Torokhov 提交于
Also move error handling in probe() out of line and do not bother to reset fields in structures that are about to be freed. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 22 9月, 2009 2 次提交
-
-
由 Liam Girdwood 提交于
Fixes the following errors on both tps650xx regulator drivers :- drivers/regulator/tps65023-regulator: struct i2c_device_id is 32 bytes. The last of 1 is: 0x74 0x70 0x73 0x36 0x35 0x30 0x32 0x33 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 FATAL: drivers/regulator/tps65023-regulator: struct i2c_device_id is not terminated with a NULL entry! This patch also fixes the GPL v2 licence string for both drivers. Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Anuj Aggarwal 提交于
Adding support for TI TPS65023 regulator driver Signed-off-by: NAnuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-