In __btrfs_free_extent we will print the leaf if we fail to find the extent we
wanted, but the problem is if we get an error we won't have a leaf so often this
leads to a NULL pointer dereference and we lose the error that actually
occurred.  So only print the leaf if ret > 0, which means we didn't find the
item we were looking for but we didn't error either.  This way the error is
preserved.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Here I have a two SSD-partitions btrfs, and they are defaultly set to
"data=raid0, metadata=raid1", then I try to fill my btrfs partition
till "No space left on device", via "dd if=/dev/zero of=/mnt/btrfs/tmp".

I get an oops panic from kernel BUG at fs/btrfs/extent-tree.c:5199!, which
refers to find_free_extent's
BUG_ON(index != get_block_group_index(block_group));

In SSD mode, in order to find enough space to alloc, we may check the
block_group cache which has been checked sometime before, but the index is not
updated, where it hits the BUG_ON.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Acked-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The access for ro in btrfs_block_group_cache should be protected
because of the racy lock in relocation.
Signed-off-by: NWu Bo <wu.bo@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When btrfs_unlink_inode() and btrfs_orphan_add() in btrfs_unlink()
are error, the error code is returned to the caller instead of
BUG_ON().
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The btrfs transaction code will return any errors that come from
reserve_metadata_bytes.  We need to make sure we don't return funny
things like 1 or EAGAIN.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch was originally from Tejun Heo.  lockdep complains about the btrfs
locking because we sometimes take btree locks from two different trees at the
same time.  The current classes are based only on level in the btree, which
isn't enough information for lockdep to figure out if the lock is safe.

This patch makes a class for each type of tree, and lumps all the FS trees that
actually have files and directories into the same class.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The btrfs metadata btree is the source of significant
lock contention, especially in the root node.   This
commit changes our locking to use a reader/writer
lock.

The lock is built on top of rw spinlocks, and it
extends the lock tracking to remember if we have a
read lock or a write lock when we go to blocking.  Atomics
count the number of blocking readers or writers at any
given time.

It removes all of the adaptive spinning from the old code
and uses only the spinning/blocking hints inside of btrfs
to decide when it should continue spinning.

In read heavy workloads this is dramatically faster.  In write
heavy workloads we're still faster because of less contention
on the root node lock.

We suffer slightly in dbench because we schedule more often
during write locks, but all other benchmarks so far are improved.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When we balanced the chunks across the devices, BUG_ON() in
__finish_chunk_alloc() was triggered.

------------[ cut here ]------------
kernel BUG at fs/btrfs/volumes.c:2568!
[SNIP]
Call Trace:
 [<ffffffffa049525e>] btrfs_alloc_chunk+0x8e/0xa0 [btrfs]
 [<ffffffffa04546b0>] do_chunk_alloc+0x330/0x3a0 [btrfs]
 [<ffffffffa045c654>] btrfs_reserve_extent+0xb4/0x1f0 [btrfs]
 [<ffffffffa045c86b>] btrfs_alloc_free_block+0xdb/0x350 [btrfs]
 [<ffffffffa048a8d8>] ? read_extent_buffer+0xd8/0x1d0 [btrfs]
 [<ffffffffa04476fd>] __btrfs_cow_block+0x14d/0x5e0 [btrfs]
 [<ffffffffa044660d>] ? read_block_for_search+0x14d/0x4d0 [btrfs]
 [<ffffffffa0447c9b>] btrfs_cow_block+0x10b/0x240 [btrfs]
 [<ffffffffa044dd5e>] btrfs_search_slot+0x49e/0x7a0 [btrfs]
 [<ffffffffa044f07d>] btrfs_insert_empty_items+0x8d/0xf0 [btrfs]
 [<ffffffffa045e973>] insert_with_overflow+0x43/0x110 [btrfs]
 [<ffffffffa045eb0d>] btrfs_insert_dir_item+0xcd/0x1f0 [btrfs]
 [<ffffffffa0489bd0>] ? map_extent_buffer+0xb0/0xc0 [btrfs]
 [<ffffffff812276ad>] ? rb_insert_color+0x9d/0x160
 [<ffffffffa046cc40>] ? inode_tree_add+0xf0/0x150 [btrfs]
 [<ffffffffa0474801>] btrfs_add_link+0xc1/0x1c0 [btrfs]
 [<ffffffff811dacac>] ? security_inode_init_security+0x1c/0x30
 [<ffffffffa04a28aa>] ? btrfs_init_acl+0x4a/0x180 [btrfs]
 [<ffffffffa047492f>] btrfs_add_nondir+0x2f/0x70 [btrfs]
 [<ffffffffa046af16>] ? btrfs_init_inode_security+0x46/0x60 [btrfs]
 [<ffffffffa0474ac0>] btrfs_create+0x150/0x1d0 [btrfs]
 [<ffffffff81159c63>] ? generic_permission+0x23/0xb0
 [<ffffffff8115b415>] vfs_create+0xa5/0xc0
 [<ffffffff8115ce6e>] do_last+0x5fe/0x880
 [<ffffffff8115dc0d>] path_openat+0xcd/0x3d0
 [<ffffffff8115e029>] do_filp_open+0x49/0xa0
 [<ffffffff8116a965>] ? alloc_fd+0x95/0x160
 [<ffffffff8114f0c7>] do_sys_open+0x107/0x1e0
 [<ffffffff810bcc3f>] ? audit_syscall_entry+0x1bf/0x1f0
 [<ffffffff8114f1e0>] sys_open+0x20/0x30
 [<ffffffff81484ec2>] system_call_fastpath+0x16/0x1b
[SNIP]
RIP  [<ffffffffa049444a>] __finish_chunk_alloc+0x20a/0x220 [btrfs]

The reason is:
Task1					Space balance task
do_chunk_alloc()
  __finish_chunk_alloc()
    update device info
    in the chunk tree
      alloc system metadata block
					relocate system metadata block group
					  set system metadata block group
					  readonly, This block group is the
					  only one that can allocate space. So
					  there is no free space that can be
					  allocated now.
        find no space and don't try
        to alloc new chunk, and then
        return ENOSPC
  BUG_ON() in __finish_chunk_alloc()
  was triggered.

Fix this bug by allocating a new system metadata chunk before relocating the
old one if we find there is no free space which can be allocated after setting
the old block group to be read-only.
Reported-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Tested-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

So I had this brilliant idea to use atomic counters for outstanding and reserved
extents, but this turned out to be a bad idea.  Consider this where we have 1
outstanding extent and 1 reserved extent

Reserver				Releaser
					atomic_dec(outstanding) now 0
atomic_read(outstanding)+1 get 1
atomic_read(reserved) get 1
don't actually reserve anything because
they are the same
					atomic_cmpxchg(reserved, 1, 0)
atomic_inc(outstanding)
atomic_add(0, reserved)
					free reserved space for 1 extent

Then the reserver now has no actual space reserved for it, and when it goes to
finish the ordered IO it won't have enough space to do it's allocation and you
get those lovely warnings.
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Kill the check to see if we have 512mb of reserved space in delalloc and
shrink_delalloc if we do.  This causes unexpected latencies and we have other
logic to see if we need to throttle.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

A user reported a deadlock when copying a bunch of files.  This is because they
were low on memory and kthreadd got hung up trying to migrate pages for an
allocation when starting the caching kthread.  The page was locked by the person
starting the caching kthread.  To fix this we just need to use the async thread
stuff so that the threads are already created and we don't have to worry about
deadlocks.  Thanks,
Reported-by: NRoman Mamedov <rm@romanrm.ru>
Signed-off-by: NJosef Bacik <josef@redhat.com>

In addition to properly handling allocation failure from btrfs_alloc_path, I
also fixed up the kzalloc error handling code immediately below it.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

I also removed the BUG_ON from error return of find_next_chunk in
init_first_rw_device(). It turns out that the only caller of
init_first_rw_device() also BUGS on any nonzero return so no actual behavior
change has occurred here.

do_chunk_alloc() also needed an update since it calls btrfs_alloc_chunk()
which can now return -ENOMEM. Instead of setting space_info->full on any
error from btrfs_alloc_chunk() I catch and return every error value _except_
-ENOSPC. Thanks goes to Tsutomu Itoh for pointing that issue out.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

This patch fixes many callers of btrfs_alloc_path() which BUG_ON allocation
failure. All the sites that are fixed in this patch were checked by me to
be fairly trivial to fix because of at least one of two criteria:

 - Callers of the function catch errors from it already so bubbling the
   error up will be handled.
 - Callers of the function might BUG_ON any nonzero return code in which
   case there is no behavior changed (but we still got to remove a BUG_ON)

The following functions were updated:

btrfs_lookup_extent, alloc_reserved_tree_block, btrfs_remove_block_group,
btrfs_lookup_csums_range, btrfs_csum_file_blocks, btrfs_mark_extent_written,
btrfs_inode_by_name, btrfs_new_inode, btrfs_symlink,
insert_reserved_file_extent, and run_delalloc_nocow
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

We keep having problems with early enospc, and that's because our method of
making space is inherently racy.  The problem is we can have one guy trying to
make space for himself, and in the meantime people come in and steal his
reservation.  In order to stop this we make a waitqueue and put anybody who
comes into reserve_metadata_bytes on that waitqueue if somebody is trying to
make more space.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

We have to do weird things when handling enospc in the transaction joining code.
Because we've already joined the transaction we cannot commit the transaction
within the reservation code since it will deadlock, so we have to return EAGAIN
and then make sure we don't retry too many times.  Instead of doing this, just
do the reservation the normal way before we join the transaction, that way we
can do whatever we want to try and reclaim space, and then if it fails we know
for sure we are out of space and we can return ENOSPC.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

data parameter should be u64 because a full-sized chunk flags field is
passed instead of 0/1 for distinguishing data from metadata.  All
underlying functions expect u64.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Even when delalloc_bytes is zero, we may need to sleep while waiting
for delalloc space.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

I was testing with empty_cluster = 0 to try and reproduce a problem and kept
hitting early enospc panics.  This was because our loop logic was a little
confused.  So this is what I did

1) Make the loop variable the ultimate decider on wether we should loop again
isntead of checking to see if we had an uncached bg, empty size or empty
cluster.

2) Increment loop before checking to see what we are on to make the loop
definitions make more sense.

3) If we are on the chunk alloc loop don't set empty_size/empty_cluster to 0
unless we didn't actually allocate a chunk.  If we did allocate a chunk we
should be able to easily setup a new cluster so clearing
empty_size/empty_cluster makes us less efficient.

This kept me from hitting panics while trying to reproduce the other problem.
Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

I noticed when running an enospc test that we would get stuck committing the
transaction in check_data_space even though we truly didn't have enough space.
So check to see if bytes_pinned is bigger than num_bytes, if it's not don't
commit the transaction.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

wrap checking of filesystem 'closing' flag and fix a few missing memory
barriers.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

Currently, btrfs_truncate_item and btrfs_extend_item returns only 0.
So, the check by BUG_ON in the caller is unnecessary.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Observed as a large delay when --mixed filesystem is filled up.
Test example:
1. create tiny --mixed FS:
   $ dd if=/dev/zero of=2G.img seek=$((2048 * 1024 * 1024 - 1)) count=1 bs=1
   $ mkfs.btrfs --mixed 2G.img
   $ mount -oloop 2G.img /mnt/ut/
2. Try to fill it up:
   $ dd if=/dev/urandom of=10M.file bs=10240 count=1024
   $ seq 1 256 | while read file_no; do echo $file_no; time cp 10M.file ${file_no}.copy; done

Up to '200.copy' it goes fast, but when disk fills-up each -ENOSPC
message takes 3 seconds to pop-up _every_ ENOSPC (and in usermode linux
it's even more: 30-60 seconds!). (Maybe, time depends on kernel's timer resolution).

No IO, no CPU load, just rescheduling. Some debugging revealed busy spinning
in shrink_delalloc.
Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

If we have a very large filesystem, we can spend a lot of time in
find_free_extent just trying to allocate from empty block groups.  So instead
check to see if the block group even has enough space for the allocation, and if
not go on to the next block group.
Signed-off-by: NJosef Bacik <josef@redhat.com>

Our readahead is sort of sloppy, and really isn't always needed.  For example if
ls is doing a stating ls (which is the default) it's going to stat in non-disk
order, so if say you have a directory with a stupid amount of files, readahead
is going to do nothing but waste time in the case of doing the stat.  Taking the
unconditional readahead out made my test go from 57 minutes to 36 minutes.  This
means that everywhere we do loop through the tree we want to make sure we do set
path->reada properly, so I went through and found all of the places where we
loop through the path and set reada to 1.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

When the fs is super full and we unmount the fs, we could get stuck in this
thing where unmount is waiting for the caching kthread to make progress and the
caching kthread keeps scheduling because we're in the middle of a commit.  So
instead just let the caching kthread keep going and only yeild if
need_resched().  This makes my horrible umount case go from taking up to 10
minutes to taking less than 20 seconds.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Originally this was going to be used as a way to give hints to the allocator,
but frankly we can get much better hints elsewhere and it's not even used at all
for anything usefull.  In addition to be completely useless, when we initialize
an inode we try and find a freeish block group to set as the inodes block group,
and with a completely full 40gb fs this takes _forever_, so I imagine with say
1tb fs this is just unbearable.  So just axe the thing altoghether, we don't
need it and it saves us 8 bytes in the inode and saves us 500 microseconds per
inode lookup in my testcase.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

The ceph guys keep running into problems where we have space reserved in our
orphan block rsv when freeing it up.  This is because they tend to do snapshots
alot, so their truncates tend to use a bunch of space, so when we go to do
things like update the inode we have to steal reservation space in order to make
the reservation happen.  This happens because truncate can use as much space as
it freaking feels like, but we still have to hold space for removing the orphan
item and updating the inode, which will definitely always happen.  So in order
to fix this we need to split all of the reservation stuf up.  So with this patch
we have

1) The orphan block reserve which only holds the space for deleting our orphan
item when everything is over.

2) The truncate block reserve which gets allocated and used specifically for the
space that the truncate will use on a per truncate basis.

3) The transaction will always have 1 item's worth of data reserved so we can
update the inode normally.

Hopefully this will make the ceph problem go away.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

We use trans_mutex for lots of things, here's a basic list

1) To serialize trans_handles joining the currently running transaction
2) To make sure that no new trans handles are started while we are committing
3) To protect the dead_roots list and the transaction lists

Really the serializing trans_handles joining is not too hard, and can really get
bogged down in acquiring a reference to the transaction.  So replace the
trans_mutex with a trans_lock spinlock and use it to do the following

1) Protect fs_info->running_transaction.  All trans handles have to do is check
this, and then take a reference of the transaction and keep on going.
2) Protect the fs_info->trans_list.  This doesn't get used too much, basically
it just holds the current transactions, which will usually just be the currently
committing transaction and the currently running transaction at most.
3) Protect the dead roots list.  This is only ever processed by splicing the
list so this is relatively simple.
4) Protect the fs_info->reloc_ctl stuff.  This is very lightweight and was using
the trans_mutex before, so this is a pretty straightforward change.
5) Protect fs_info->no_trans_join.  Because we don't hold the trans_lock over
the entirety of the commit we need to have a way to block new people from
creating a new transaction while we're doing our work.  So we set no_trans_join
and in join_transaction we test to see if that is set, and if it is we do a
wait_on_commit.
6) Make the transaction use count atomic so we don't need to take locks to
modify it when we're dropping references.
7) Add a commit_lock to the transaction to make sure multiple people trying to
commit the same transaction don't race and commit at the same time.
8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl
trans.

I have tested this with xfstests, but obviously it is a pretty hairy change so
lots of testing is greatly appreciated.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

I keep forgetting that btrfs_join_transaction() just ignores the num_items
argument, which leads me to sending pointless patches and looking stupid :).  So
just kill the num_items argument from btrfs_join_transaction and
btrfs_start_ioctl_transaction, since neither of them use it.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Changelog V5 -> V6:
- Fix oom when the memory load is high, by storing the delayed nodes into the
  root's radix tree, and letting btrfs inodes go.

Changelog V4 -> V5:
- Fix the race on adding the delayed node to the inode, which is spotted by
  Chris Mason.
- Merge Chris Mason's incremental patch into this patch.
- Fix deadlock between readdir() and memory fault, which is reported by
  Itaru Kitayama.

Changelog V3 -> V4:
- Fix nested lock, which is reported by Itaru Kitayama, by updating space cache
  inode in time.

Changelog V2 -> V3:
- Fix the race between the delayed worker and the task which does delayed items
  balance, which is reported by Tsutomu Itoh.
- Modify the patch address David Sterba's comment.
- Fix the bug of the cpu recursion spinlock, reported by Chris Mason

Changelog V1 -> V2:
- break up the global rb-tree, use a list to manage the delayed nodes,
  which is created for every directory and file, and used to manage the
  delayed directory name index items and the delayed inode item.
- introduce a worker to deal with the delayed nodes.

Compare with Ext3/4, the performance of file creation and deletion on btrfs
is very poor. the reason is that btrfs must do a lot of b+ tree insertions,
such as inode item, directory name item, directory name index and so on.

If we can do some delayed b+ tree insertion or deletion, we can improve the
performance, so we made this patch which implemented delayed directory name
index insertion/deletion and delayed inode update.

Implementation:
- introduce a delayed root object into the filesystem, that use two lists to
  manage the delayed nodes which are created for every file/directory.
  One is used to manage all the delayed nodes that have delayed items. And the
  other is used to manage the delayed nodes which is waiting to be dealt with
  by the work thread.
- Every delayed node has two rb-tree, one is used to manage the directory name
  index which is going to be inserted into b+ tree, and the other is used to
  manage the directory name index which is going to be deleted from b+ tree.
- introduce a worker to deal with the delayed operation. This worker is used
  to deal with the works of the delayed directory name index items insertion
  and deletion and the delayed inode update.
  When the delayed items is beyond the lower limit, we create works for some
  delayed nodes and insert them into the work queue of the worker, and then
  go back.
  When the delayed items is beyond the upper bound, we create works for all
  the delayed nodes that haven't been dealt with, and insert them into the work
  queue of the worker, and then wait for that the untreated items is below some
  threshold value.
- When we want to insert a directory name index into b+ tree, we just add the
  information into the delayed inserting rb-tree.
  And then we check the number of the delayed items and do delayed items
  balance. (The balance policy is above.)
- When we want to delete a directory name index from the b+ tree, we search it
  in the inserting rb-tree at first. If we look it up, just drop it. If not,
  add the key of it into the delayed deleting rb-tree.
  Similar to the delayed inserting rb-tree, we also check the number of the
  delayed items and do delayed items balance.
  (The same to inserting manipulation)
- When we want to update the metadata of some inode, we cached the data of the
  inode into the delayed node. the worker will flush it into the b+ tree after
  dealing with the delayed insertion and deletion.
- We will move the delayed node to the tail of the list after we access the
  delayed node, By this way, we can cache more delayed items and merge more
  inode updates.
- If we want to commit transaction, we will deal with all the delayed node.
- the delayed node will be freed when we free the btrfs inode.
- Before we log the inode items, we commit all the directory name index items
  and the delayed inode update.

I did a quick test by the benchmark tool[1] and found we can improve the
performance of file creation by ~15%, and file deletion by ~20%.

Before applying this patch:
Create files:
        Total files: 50000
        Total time: 1.096108
        Average time: 0.000022
Delete files:
        Total files: 50000
        Total time: 1.510403
        Average time: 0.000030

After applying this patch:
Create files:
        Total files: 50000
        Total time: 0.932899
        Average time: 0.000019
Delete files:
        Total files: 50000
        Total time: 1.215732
        Average time: 0.000024

[1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3

Many thanks for Kitayama-san's help!
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dave@jikos.cz>
Tested-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: NItaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When a btrfs disk is created by mixed data & metadata option, it will have no
pure data or pure metadata space info.

In btrfs's for-linus branch, commit 78b1ea13838039cd88afdd62519b40b344d6c920
(Btrfs: fix OOPS of empty filesystem after balance) initializes space infos at
the very beginning.  The problem is this initialization does not take the mixed
case into account, which will cause btrfs will easily get into ENOSPC in mixed
case.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Remove code which has been #if0-ed out for a very long time and does not
seem to be related to current codebase anymore.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

parameter tree root it's not used since commit
5f39d397 ("Btrfs: Create extent_buffer
interface for large blocksizes")
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

pass GFP_NOFS directly to kmem_cache_alloc
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

Signed-off-by: NDavid Sterba <dsterba@suse.cz>

The check on the return value of kmalloc() is added to some places.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This is similar to block group caching.

We dedicate a special inode in fs tree to save free ino cache.

At the very first time we create/delete a file after mount, the free ino
cache will be loaded from disk into memory. When the fs tree is commited,
the cache will be written back to disk.

To keep compatibility, we check the root generation against the generation
of the special inode when loading the cache, so the loading will fail
if the btrfs filesystem was mounted in an older kernel before.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

There's a potential problem in 32bit system when we exhaust 32bit inode
numbers and start to allocate big inode numbers, because btrfs uses
inode->i_ino in many places.

So here we always use BTRFS_I(inode)->location.objectid, which is an
u64 variable.

There are 2 exceptions that BTRFS_I(inode)->location.objectid !=
inode->i_ino: the btree inode (0 vs 1) and empty subvol dirs (256 vs 2),
and inode->i_ino will be used in those cases.

Another reason to make this change is I'm going to use a special inode
to save free ino cache, and the inode number must be > (u64)-256.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>