- 24 6月, 2016 1 次提交
-
-
由 Peter Zijlstra 提交于
The tilepro change wasn't ever compiled it seems (the 0day built bot also doesn't have a toolchain for it). Make it work. The thing that makes the patch bigger than desired is namespace collision with the C11 __atomic builtin functions. So rename the tilepro functions to __atomic32. Reported-by: NSudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NChris Metcalf <cmetcalf@mellanox.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 1af5de9a ("locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()") Link: http://lkml.kernel.org/r/20160622091649.GB30154@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 16 6月, 2016 1 次提交
-
-
由 Peter Zijlstra 提交于
Implement FETCH-OP atomic primitives, these are very similar to the existing OP-RETURN primitives we already have, except they return the value of the atomic variable _before_ modification. This is especially useful for irreversible operations -- such as bitops (because it becomes impossible to reconstruct the state prior to modification). Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NChris Metcalf <cmetcalf@mellanox.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 27 7月, 2015 1 次提交
-
-
由 Chris Metcalf 提交于
Implement atomic logic ops -- atomic_{or,xor,and}. For tilegx, these are relatively straightforward; the architecture provides atomic "or" and "and", both 32-bit and 64-bit. To support xor we provide a loop using "cmpexch". For the older 32-bit tilepro architecture, we have to extend the set of low-level assembly routines to include 32-bit "and", as well as all three 64-bit routines. Somewhat confusingly, some 32-bit versions are already used by the bitops inlines, with parameter types appropriate for bitops, so we have to do a bit of casting to match "int" to "unsigned long". Signed-off-by: NChris Metcalf <cmetcalf@ezchip.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1436474297-32187-1-git-send-email-cmetcalf@ezchip.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 28 9月, 2013 1 次提交
-
-
由 Chen Gang 提交于
atomic* value is signed value, and atomic* functions need also process signed value (parameter value, and return value), so use 'long long' instead of 'u64'. After replacement, it will also fix a bug for atomic64_add_negative(): "u64 is never less than 0". The modifications are: in vim, use "1,% s/\<u64\>/long long/g" command. remove redundant '__aligned(8)'. be sure of 80 (and macro '\') columns limitation after replacement. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [re-instated const cast]
-
- 07 9月, 2013 1 次提交
-
-
由 Chris Metcalf 提交于
The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
- 04 9月, 2013 2 次提交
-
-
由 Chris Metcalf 提交于
This chip is no longer being actively developed for (it was superceded by the TILEPro64 in 2008), and in any case the existing compiler and toolchain in the community do not support it. It's unlikely that the kernel works with TILE64 at this point as the configuration has not been tested in years. The support is also awkward as it requires maintaining a significant number of ifdefs. So, just remove it altogether. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Chris Metcalf 提交于
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
- 26 5月, 2012 1 次提交
-
-
由 Chris Metcalf 提交于
Use direct load/store for the get_user/put_user. Previously, we would call out to a helper routine that would do the appropriate thing and then return, handling the possible exception internally. Now we inline the load or store, along with a "we succeeded" indication in a register; if the load or store faults, we write a "we failed" indication into the same register and then return to the following instruction. This is more efficient and gives us more compact code, as well as being more in line with what other architectures do. The special futex assembly source file for TILE-Gx also disappears in this change; we just use the same inlining idiom there as well, putting the appropriate atomic operations directly into futex_atomic_op_inuser() (and thus into the FUTEX_WAIT function). The underlying atomic copy_from_user, copy_to_user functions were renamed using the (cryptic) x86 convention as copy_from_user_ll and copy_to_user_ll. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
- 27 7月, 2011 1 次提交
-
-
由 Arun Sharma 提交于
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: NArun Sharma <asharma@fb.com> Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 3月, 2011 1 次提交
-
-
由 Chris Metcalf 提交于
Commit 8d7718aa changed "int" to "u32" in the prototypes but not the definition. I missed this when I saw the patch go by on LKML. We cast "u32 *" to "int *" since we are tying into the underlying atomics framework, and atomic_t uses int as its value type. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Reviewed-by: NMichel Lespinasse <walken@google.com>
-
- 11 3月, 2011 1 次提交
-
-
由 Chris Metcalf 提交于
This is a grab bag of changes with no actual change to generated code. This includes whitespace and comment typos, plus a couple of stale comments being removed. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
- 02 3月, 2011 1 次提交
-
-
由 Chris Metcalf 提交于
The convention changed to, e.g., ".data..page_aligned". This commit fixes the places in the tile architecture that were still using the old convention. One tile-specific section (.init.page) was dropped in favor of just using an "aligned" attribute. Sam Ravnborg <sam@ravnborg.org> pointed out __PAGE_ALIGNED_BSS, etc. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
- 06 10月, 2010 1 次提交
-
-
由 Akinobu Mita 提交于
Some BUG_ON checks can be detected at compile time rather than at runtime. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
- 07 7月, 2010 1 次提交
-
-
由 Chris Metcalf 提交于
This commit is primarily changes caused by reviewing "sparse" and "checkpatch" output on our sources, so is somewhat noisy, since things like "printk() -> pr_err()" (or whatever) throughout the codebase tend to get tedious to read. Rather than trying to tease apart precisely which things changed due to which type of code review, this commit includes various cleanups in the code: - sparse: Add declarations in headers for globals. - sparse: Fix __user annotations. - sparse: Using gfp_t consistently instead of int. - sparse: removing functions not actually used. - checkpatch: Clean up printk() warnings by using pr_info(), etc.; also avoid partial-line printks except in bootup code. - checkpatch: Use exposed structs rather than typedefs. - checkpatch: Change some C99 comments to C89 comments. In addition, a couple of minor other changes are rolled in to this commit: - Add support for a "raise" instruction to cause SIGFPE, etc., to be raised. - Remove some compat code that is unnecessary when we fully eliminate some of the deprecated syscalls from the generic syscall ABI. - Update the tile_defconfig to reflect current config contents. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 05 6月, 2010 1 次提交
-
-
由 Chris Metcalf 提交于
This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: NPaul Mundt <lethal@linux-sh.org>
-