- 25 2月, 2019 18 次提交
-
-
由 Andy Roulin 提交于
Introduce dev_change_proto_down_generic, a generic ndo_change_proto_down implementation, which sets the netdev carrier state according to proto_down. This adds the ability to set protodown on vxlan and macvlan devices in a generic way for use by control protocols like VRRPD. Signed-off-by: NAndy Roulin <aroulin@cumulusnetworks.com> Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Vlad Buslov says: ==================== Add tests for unlocked flower classifier implementation Implement tests for tdc testsuite to verify concurrent rules update with rtnl-unlocked flower classifier implementation. The goal of these tests is to verify general flower classifier correctness by updating filters on same classifier instance in parallel and to verify its atomicity by concurrently updating filters in same handle range. All three filter update operations (add, replace, delete) are tested. Existing script tdc_batch.py is re-used for batch file generation. It is extended with several optional CLI arguments that are needed for concurrency tests. Thin wrapper tdc_multibatch.py is implemented on top of tdc_batch.py to simplify its usage when generating multiple batch files for several test configurations. Parallelism in tests is implemented by running multiple instances of tc in batch mode with xargs tool. Xargs is chosen for its ease of use and because it is available by default on most modern Linux distributions. ==================== Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Implement test that runs 5 instances of tc replace filter in parallel with 5 instances of tc del filter from same tp instance. Each instance uses its own filter handle and key range. Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Implement test that runs 5 instances of tc add filter in parallel with 5 instances of tc del filter from same tp instance. Each instance uses its own filter handle and key range. Extend tdc_multibatch.py with additional options required to implement the test: common prefix for all generated batch files, first value of filter handle range, MAC address prefix modifier. These are necessary to allow creating batch files with unique keys and handle ranges with multiple invocation of tdc_multibatch.py helper script. Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Implement test that verifies concurrent deletion of rules by executing 10 tc instances that delete flower filters in same handle range. In this case only one tc instance succeeds in deleting a filter with particular handle. To mitigate expected failures of all other instances, run tc with 'force' option to continue processing batch file in case of errors and expect xargs to return code '123' that indicates that invocation of command(s) exited with error in range 1-125. Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Implement test that verifies concurrent replacement of rules by executing 10 tc instances that replace flower filters in same handle range. Extend tdc_multibatch.py script with new optional CLI argument that is used to generate all batch files with same filter handle range. Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Implement test that verifies parallel rules replacement by adding 1 million flower filters and then replacing them with 10 concurrent tc instances. Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Implement test that verifies parallel rules deletion by adding 1 million flower filters and then deleting them with 10 concurrent tc instances. Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Implement test that verifies parallel rules insertion by adding 1 million flower filters with 10 concurrent tc instances. Put it to standalone 'concurrency' category. Implement tdc_multibatch.py helper script that is used to generate multiple batch files for concurrent tc execution. Extend config with new 'BATCH_DIR' variable to specify temporary output directory that is used to store batch files generated by tdc_multibatch.py. Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Buslov 提交于
Extend tdc_batch.py with several optional CLI arguments that are used for implementation of concurrency tests in following patches in this set: - Add optional argument to specify range of filter handles used in batch file [fitler_handle, filter_handle+number). This is needed for testing filter deletion where it is necessary to know exact handles of configured filters. - Add optional argument to specify filter operation type (possible values are ['add', 'del', 'replace']) instead of hardcoded "add" value. This allows generation of batches for filter addition, deletion and replacement. - Add optional argument to allow user to change mac address prefix that is used for all filters in batch. This is necessary to allow generating multiple batches with unique flower classifier keys. Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maxim Mikityanskiy 提交于
qdisc_pkt_len_init expects transport_header to be set for GSO packets. Patch [1] skips transport_header validation for GSO packets that don't have network_header set at the moment of calling virtio_net_hdr_to_skb, and allows them to pass into the stack. After patch [2] no placeholder value is assigned to transport_header if dissection fails, so this patch adds a check to the place where the value of transport_header is used. [1] https://patchwork.ozlabs.org/patch/1044429/ [2] https://patchwork.ozlabs.org/patch/1046122/Signed-off-by: NMaxim Mikityanskiy <maximmi@mellanox.com> Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
Add some phylink documentation to the networking book detailing how to convert network drivers from phylib to phylink. Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
A detail for mac_config() had been missed in the documentation for the method - it is expected that the method will update the MAC to the settings, rather than completely reprogram the MAC on each call. Update the documentation for this method for this detail. Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
This pointer is RCU protected, so proper primitives should be used. Signed-off-by: NZhang Yu <zhangyu31@baidu.com> Signed-off-by: NLi RongQing <lirongqing@baidu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
When using genphy_c45_read_abilities() as get_features callback we also have to set the autoneg capability in phydev->supported. Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Reviewed-by: NMaxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Three conflicts, one of which, for marvell10g.c is non-trivial and requires some follow-up from Heiner or someone else. The issue is that Heiner converted the marvell10g driver over to use the generic c45 code as much as possible. However, in 'net' a bug fix appeared which makes sure that a new local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0 is cleared. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: "Bug fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: record maximum physical address width in kvm_mmu_extended_role kvm: x86: Return LA57 feature based on hardware capability x86/kvm/mmu: fix switch between root and guest MMUs s390: vsie: Use effective CRYCBD.31 to check CRYCBD validity
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Hopefully the last pull request for this release. Fingers crossed: 1) Only refcount ESP stats on full sockets, from Martin Willi. 2) Missing barriers in AF_UNIX, from Al Viro. 3) RCU protection fixes in ipv6 route code, from Paolo Abeni. 4) Avoid false positives in untrusted GSO validation, from Willem de Bruijn. 5) Forwarded mesh packets in mac80211 need more tailroom allocated, from Felix Fietkau. 6) Use operstate consistently for linkup in team driver, from George Wilkie. 7) ThunderX bug fixes from Vadim Lomovtsev. Mostly races between VF and PF code paths. 8) Purge ipv6 exceptions during netdevice removal, from Paolo Abeni. 9) nfp eBPF code gen fixes from Jiong Wang. 10) bnxt_en firmware timeout fix from Michael Chan. 11) Use after free in udp/udpv6 error handlers, from Paolo Abeni. 12) Fix a race in x25_bind triggerable by syzbot, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) net: phy: realtek: Dummy IRQ calls for RTL8366RB tcp: repaired skbs must init their tso_segs net/x25: fix a race in x25_bind() net: dsa: Remove documentation for port_fdb_prepare Revert "bridge: do not add port to router list when receives query with source 0.0.0.0" selftests: fib_tests: sleep after changing carrier. again. net: set static variable an initial value in atl2_probe() net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G bpf, doc: add bpf list as secondary entry to maintainers file udp: fix possible user after free in error handler udpv6: fix possible user after free in error handler fou6: fix proto error handler argument type udpv6: add the required annotation to mib type mdio_bus: Fix use-after-free on device_register fails net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 bnxt_en: Wait longer for the firmware message response to complete. bnxt_en: Fix typo in firmware message timeout logic. nfp: bpf: fix ALU32 high bits clearance bug nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K Documentation: networking: switchdev: Update port parent ID section ...
-
- 24 2月, 2019 22 次提交
-
-
由 Roopa Prabhu 提交于
Also, extend neigh_state_str to include neigh dummy states noarp and permanent Fixes: 9c03b282 ("trace: events: add a few neigh tracepoints") Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Walleij 提交于
This fixes a regression introduced by commit 0d2e778e "net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt". This assumes that a PHY cannot trigger interrupt unless it has .config_intr() or .ack_interrupt() implemented. A later patch makes the code assume both need to be implemented for interrupts to be present. But this PHY (which is inside a DSA) will happily fire interrupts without either callback. Implement dummy callbacks for .config_intr() and .ack_interrupt() in the phy header to fix this. Tested on the RTL8366RB on D-Link DIR-685. Fixes: 0d2e778e ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt") Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
syzbot reported a WARN_ON(!tcp_skb_pcount(skb)) in tcp_send_loss_probe() [1] This was caused by TCP_REPAIR sent skbs that inadvertenly were missing a call to tcp_init_tso_segs() [1] WARNING: CPU: 1 PID: 0 at net/ipv4/tcp_output.c:2534 tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc7+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] fixup_bug arch/x86/kernel/traps.c:173 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534 Code: 88 fc ff ff 4c 89 ef e8 ed 75 c8 fb e9 c8 fc ff ff e8 43 76 c8 fb e9 63 fd ff ff e8 d9 75 c8 fb e9 94 f9 ff ff e8 bf 03 91 fb <0f> 0b e9 7d fa ff ff e8 b3 03 91 fb 0f b6 1d 37 43 7a 03 31 ff 89 RSP: 0018:ffff8880ae907c60 EFLAGS: 00010206 RAX: ffff8880a989c340 RBX: 0000000000000000 RCX: ffffffff85dedbdb RDX: 0000000000000100 RSI: ffffffff85dee0b1 RDI: 0000000000000005 RBP: ffff8880ae907c90 R08: ffff8880a989c340 R09: ffffed10147d1ae1 R10: ffffed10147d1ae0 R11: ffff8880a3e8d703 R12: ffff888091b90040 R13: ffff8880a3e8d540 R14: 0000000000008000 R15: ffff888091b90860 tcp_write_timer_handler+0x5c0/0x8a0 net/ipv4/tcp_timer.c:583 tcp_write_timer+0x10e/0x1d0 net/ipv4/tcp_timer.c:607 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 arch/x86/include/asm/irqflags.h:58 Code: ff ff ff 48 89 c7 48 89 45 d8 e8 59 0c a1 fa 48 8b 45 d8 e9 ce fe ff ff 48 89 df e8 48 0c a1 fa eb 82 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffff8880a98afd78 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff1125061 RBX: ffff8880a989c340 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff8880a989cbbc RBP: ffff8880a98afda8 R08: ffff8880a989c340 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff889282f8 R14: 0000000000000001 R15: 0000000000000000 arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:555 default_idle_call+0x36/0x90 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x386/0x570 kernel/sched/idle.c:262 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:353 start_secondary+0x404/0x5c0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 79861919 ("tcp: fix TCP_REPAIR xmit queue setup") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
syzbot was able to trigger another soft lockup [1] I first thought it was the O(N^2) issue I mentioned in my prior fix (f657d22ee1f "net/x25: do not hold the cpu too long in x25_new_lci()"), but I eventually found that x25_bind() was not checking SOCK_ZAPPED state under socket lock protection. This means that multiple threads can end up calling x25_insert_socket() for the same socket, and corrupt x25_list [1] watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492] Modules linked in: irq event stamp: 27515 hardirqs last enabled at (27514): [<ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (27515): [<ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (32): [<ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336 softirqs last disabled at (34): [<ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341 CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97 Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2 RSP: 0018:ffff88806e94fc48 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffff1100d84dac5 RBX: 0000000000000001 RCX: ffffc90006197000 RDX: 0000000000040000 RSI: ffffffff86324bf3 RDI: ffff88806c26d628 RBP: ffff88806e94fc48 R08: ffff88806c1c6500 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: ffff88806c26d628 R13: ffff888090455200 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f3a107e4700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3a107e3db8 CR3: 00000000a5544000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __x25_find_socket net/x25/af_x25.c:327 [inline] x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342 x25_new_lci net/x25/af_x25.c:355 [inline] x25_connect+0x380/0xde0 net/x25/af_x25.c:784 __sys_connect+0x266/0x330 net/socket.c:1662 __do_sys_connect net/socket.c:1673 [inline] __se_sys_connect net/socket.c:1670 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1670 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a107e3c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e29 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000005 RBP: 000000000073c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3a107e46d4 R13: 00000000004be362 R14: 00000000004ceb98 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86 Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00 RSP: 0018:ffff888085c47bd8 EFLAGS: 00000206 RAX: 0000000000000300 RBX: ffffffff89412b00 RCX: 1ffffffff1282560 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89412b00 RBP: ffff888085c47c70 R08: 1ffffffff1282560 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: 00000000000000ff R13: fffffbfff1282560 R14: 1ffff11010b88f7d R15: 0000000000000003 FS: 00007fdd04086700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd04064db8 CR3: 0000000090be0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:703 __sys_bind+0x23f/0x290 net/socket.c:1481 __do_sys_bind net/socket.c:1492 [inline] __se_sys_bind net/socket.c:1490 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Fixes: 90c27297 ("X.25 remove bkl in bind") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hauke Mehrtens 提交于
This callback was removed some time ago, also remove the documentation. Fixes: 1b6dd556 ("net: dsa: Remove prepare phase for FDB") Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hangbin Liu 提交于
This reverts commit 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries") The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest. As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed. Reported-by: NLinus Lüssing <linus.luessing@c0d3.blue> Reported-by: NSebastian Gottschall <s.gottschall@newmedia-net.de> Fixes: 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") Fixes: 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries") Signed-off-by: NHangbin Liu <liuhangbin@gmail.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Just like commit e2ba732a ("selftests: fib_tests: sleep after changing carrier"), wait one second to allow linkwatch to propagate the carrier change to the stack. There are two sets of carrier tests. The first slept after the carrier was set to off, and when the second set ran, it was likely that the linkwatch would be able to run again without much delay, reducing the likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a loop, you will quickly notice the failures. Sleeping on the second set of tests make the failures go away. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Heiner Kallweit says: ==================== net: phy: aquantia: improve and extend driver This series improves and extends the Aquantia PHY driver. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
Use new function genphy_c45_read_status(). 1000BaseT link partner advertisement needs to be read from vendor registers. Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
Similar to genphy_read_status() for Clause 22 add a generic read_status function for Clause 45. Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
Because 1000BaseT isn't covered by Clause 45, the 1000BaseT flags in phydev->lp_advertising may have been set based on vendor registers already. genphy_c45_read_lpa() would clear these flags as of today. Therefore switch to mii_lpa_mod_linkmode_lpa_t. Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Lunn 提交于
Make use of the generic c45 code, plus code specific to the Aquantia phy for 1000BaseT negotiation. Signed-off-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
AQCS109 belongs to a family of PHY's where certain members don't support 5G or 10G. However for all members of the family the chip reports 10G and 5G capability. Therefore remove the not supported modes for AQCS109. Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux由 David S. Miller 提交于
Saeed Mahameed says: ==================== mlx5-updates-2019-02-21 This series adds some misc updates to mlx5 driver, 1) Eli Britstein, Introduces tunnel entropy control from PCMR register and fixes GRE key by controlling port tunnel entropy calculation. 2) Eran Ben Elisha, provides some mlx5 fixes to the latest tx devlink health reporting mechanism. 3) Huy Nguyen, Added the support for ndo bridge_setlink to allow VEPA/VEB E-Switch legacy mode configurations. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Ido Schimmel says: ==================== mlxsw: Add support for new port types and speeds for Spectrum-2 Shalom says: This patchset adds support for new port types and speeds for Spectrum-2. Patch #1 + #2 removes an unsupported PTYS field and a duplicate link mode entry. Patch #3 queries port's connector type from firmware instead of deriving it from port admin state. Patch #4 renames functions which relate to port type-speed to be Spectrum-1 specific. Patch #5 defines port type-speed operations and applies it for Spectrum-1. Patch #6 + #7 are small renaming and cosmetic changes. Patch #8 adds new port type-speed fields for PTYS register. These new fields extend the existing ones in order to support more types and speeds. Patch #9 adds Spectrum-2 support for port type-speed operations. Patch #10 adds Spectrum-2 new port types and speeds. For Spectrum-2, the user must configure all the types per speed if he / she wants a specific speed to be advertised. For example, if the user wants to advertise 100Gbps 4-lanes speed, the following ethtool bits should be advertised: Supported ethtool bits for 100Gbps 4-lanes: 0x1000000000 100000baseKR4 Full 0x2000000000 100000baseSR4 Full 0x4000000000 100000baseCR4 Full 0x8000000000 100000baseLR4_ER4 Full Command for advertising 100Gbps 4-lanes: ethtool -s enp3s0np1 advertise 0xF000000000 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
Add Spectrum-2 ASIC support for the following new port types and speeds: * 50Gbps 1-lane * 100Gbps 2-lanes * 200Gbps 4-lanes Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
Add Spectrum-2 ASIC port type-speed operations. Since multiple ethtool link modes are represented using a single bit in the ASIC, the driver forces the user to configure all types per a specific speed. For example, if the user wants to advertise 100Gbps 4-lanes speed, he should advertise all the types of 100Gbps 4-lanes speed that are supported by the ASIC as shown below: Supported ethtool bits for 100Gbps 4-lanes: 0x1000000000 100000baseKR4 Full 0x2000000000 100000baseSR4 Full 0x4000000000 100000baseCR4 Full 0x8000000000 100000baseLR4_ER4 Full Command for advertising 100Gbps 4-lanes: ethtool -s enp3s0np1 advertise 0xF000000000 Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
PTYS register introduces a new layout for port type-speed fields. These fields extend the existing ones in order to handle more types and speeds. For example, the new 200Gbps speed. Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
80 columns wrapping change in mlxsw_reg_ptys_eth_unpack function. Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
Rename p_eth_proto_adm to p_eth_proto_admin in mlxsw_reg_ptys_eth_unpack function. Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
Add port type-speed operations in order to have different operations for different ASICs. For now, both ASICs use the same pointer. Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shalom Toledo 提交于
Rename port speed-type functions to be Spectrum-1 ASIC specific. Signed-off-by: NShalom Toledo <shalomt@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-