- 26 1月, 2008 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: selinux: make mls_compute_sid always polyinstantiate security/selinux: constify function pointer tables and fields security: add a secctx_to_secid() hook security: call security_file_permission from rw_verify_area security: remove security_sb_post_mountroot hook Security: remove security.h include from mm.h Security: remove security_file_mmap hook sparse-warnings (NULL as 0). Security: add get, set, and cloning of superblock security information security/selinux: Add missing "space"
-
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] extint: Set initial irq type to low level [AVR32] extint: change set_irq_type() handling [AVR32] NMI debugging [AVR32] constify function pointer tables [AVR32] ATNGW100: Update defconfig [AVR32] ATSTK1002: Update defconfig [AVR32] Kconfig: Choose daughterboard instead of CPU [AVR32] Add support for ATSTK1003 and ATSTK1004 [AVR32] Clean up external DAC setup code [AVR32] ATSTK1000: Move gpio-leds setup to setup.c [AVR32] Add support for AT32AP7001 and AT32AP7002 [AVR32] Provide more CPU information in /proc/cpuinfo and dmesg [AVR32] Oprofile support [AVR32] Include instrumentation menu Disable VGA text console for AVR32 architecture [AVR32] Enable debugging only when needed ptrace: Call arch_ptrace_attach() when request=PTRACE_TRACEME [AVR32] Remove redundant try_to_freeze() call from do_signal() [AVR32] Drop GFP_COMP for DMA memory allocations
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (56 commits) [GFS2] Allow journal recovery on read-only mount [GFS2] Lockup on error [GFS2] Fix page_mkwrite truncation race path [GFS2] Fix typo [GFS2] Fix write alloc required shortcut calculation [GFS2] gfs2_alloc_required performance [GFS2] Remove unneeded i_spin [GFS2] Reduce inode size by moving i_alloc out of line [GFS2] Fix assert in log code [GFS2] Fix problems relating to execution of files on GFS2 [GFS2] Initialize extent_list earlier [GFS2] Allow page migration for writeback and ordered pages [GFS2] Remove unused variable [GFS2] Fix log block mapper [GFS2] Minor correction [GFS2] Eliminate the no longer needed sd_statfs_mutex [GFS2] Incremental patch to fix compiler warning [GFS2] Function meta_read optimization [GFS2] Only fetch the dinode once in block_map [GFS2] Reorganize function gfs2_glmutex_lock ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (125 commits) [CRYPTO] twofish: Merge common glue code [CRYPTO] hifn_795x: Fixup container_of() usage [CRYPTO] cast6: inline bloat-- [CRYPTO] api: Set default CRYPTO_MINALIGN to unsigned long long [CRYPTO] tcrypt: Make xcbc available as a standalone test [CRYPTO] xcbc: Remove bogus hash/cipher test [CRYPTO] xcbc: Fix algorithm leak when block size check fails [CRYPTO] tcrypt: Zero axbuf in the right function [CRYPTO] padlock: Only reset the key once for each CBC and ECB operation [CRYPTO] api: Include sched.h for cond_resched in scatterwalk.h [CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20 [CRYPTO] tcrypt: Add select of AEAD [CRYPTO] salsa20: Add x86-64 assembly version [CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version) [CRYPTO] gcm: Introduce rfc4106 [CRYPTO] api: Show async type [CRYPTO] chainiv: Avoid lock spinning where possible [CRYPTO] seqiv: Add select AEAD in Kconfig [CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copy [CRYPTO] null: Allow setkey on digest_null ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6由 Linus Torvalds 提交于
This can be broken down into these major areas: - Documentation updates (language translations and fixes, as well as kobject and kset documenatation updates.) - major kset/kobject/ktype rework and fixes. This cleans up the kset and kobject and ktype relationship and architecture, making sense of things now, and good documenation and samples are provided for others to use. Also the attributes for kobjects are much easier to handle now. This cleaned up a LOT of code all through the kernel, making kobjects easier to use if you want to. - struct bus_type has been reworked to now handle the lifetime rules properly, as the kobject is properly dynamic. - struct driver has also been reworked, and now the lifetime issues are resolved. - the block subsystem has been converted to use struct device now, and not "raw" kobjects. This patch has been in the -mm tree for over a year now, and finally all the issues are worked out with it. Older distros now properly work with new kernels, and no userspace updates are needed at all. - nozomi driver is added. This has also been in -mm for a long time, and many people have asked for it to go in. It is now in good enough shape to do so. - lots of class_device conversions to use struct device instead. The tree is almost all cleaned up now, only SCSI and IB is the remaining code to fix up... * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (196 commits) Driver core: coding style fixes Kobject: fix coding style issues in kobject c files Kobject: fix coding style issues in kobject.h Driver core: fix coding style issues in device.h spi: use class iteration api scsi: use class iteration api rtc: use class iteration api power supply : use class iteration api ieee1394: use class iteration api Driver Core: add class iteration api Driver core: Cleanup get_device_parent() in device_add() and device_move() UIO: constify function pointer tables Driver Core: constify the name passed to platform_device_register_simple driver core: fix build with SYSFS=n sysfs: make SYSFS_DEPRECATED depend on SYSFS Driver core: use LIST_HEAD instead of call to INIT_LIST_HEAD in __init kobject: add sample code for how to use ksets/ktypes/kobjects kobject: add sample code for how to use kobjects in a simple manner. kobject: update the kobject/kset documentation kobject: remove old, outdated documentation. ...
-
由 Pekka Enberg 提交于
If the node we're booting on doesn't have memory, bootstrapping kmalloc() caches resorts to fallback_alloc() which requires ->nodelists set for all nodes. Fix that by calling set_up_list3s() for CACHE_CACHE in kmem_cache_init(). As kmem_getpages() is called with GFP_THISNODE set, this used to work before because of breakage in 2.6.22 and before with GFP_THISNODE returning pages from the wrong node if a node had no memory. So it may have worked accidentally and in an unsafe manner because the pages would have been associated with the wrong node which could trigger bug ons and locking troubles. Tested-by: NMel Gorman <mel@csn.ul.ie> Tested-by: NOlaf Hering <olaf@aepfle.de> Reviewed-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> [ With additional one-liner by Olaf Hering - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Karsten Keil 提交于
Fix overwriting the stack with the version string (it is currently 10 bytes + zero) when unloading the capidrv module. Safeguard against overwriting it should the version string grow in the future. Should fix Kernel Bug Tracker Bug 9696. Signed-off-by: NGerd v. Egidy <gerd.von.egidy@intra2net.com> Acked-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 1月, 2008 33 次提交
-
-
由 Abhijith Das 提交于
This patch allows gfs2 to perform journal recovery even if it is mounted read-only. Strictly speaking, a read-only mount should not be writing to the filesystem, but we do this only to perform journal recovery. A read-only mount will fail if we don't recover the dirty journal. Also, when gfs2 is used as a root filesystem, it will be mounted read-only before being mounted read-write during the boot sequence. A failed read-only mount will panic the machine during bootup. Signed-off-by: NAbhijith Das <adas@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
I spotted this bug while I was digging around. Looks like it could cause a lockup in some rare error condition. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
There was a bug in the truncation/invalidation race path for ->page_mkwrite for gfs2. It ought to return 0 so that the effect is the same as if the page was truncated at any of the other points at which the page_lock is dropped. This will result in the restart of the whole page fault path. If it was due to a real truncation (as opposed to an invalidate because we let a glock go) then the ->fault path will pick that up when it gets called again. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch fixes a minor typo. Surprisingly, it still compiled. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The comparison was being made against the wrong quantity. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This is a small I/O performance enhancement to gfs2. (Actually, it is a rework of an earlier version I got wrong). The idea here is to check if the write extends past the last block in the file. If so, the function can save itself a lot of time and trouble because it knows an allocate will be required. Benchmarks like iozone should see better performance. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch removes a vestigial variable "i_spin" from the gfs2_inode structure. This not only saves us memory (>300000 of these in memory for the oom test) it also saves us time because we don't have to spend time initializing it (i.e. slightly better performance). Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
It is possible to reduce the size of GFS2 inodes by taking the i_alloc structure out of the gfs2_inode. This patch allocates the i_alloc structure whenever its needed, and frees it afterward. This decreases the amount of low memory we use at the expense of requiring a memory allocation for each page or partial page that we write. A quick test with postmark shows that the overhead is not measurable and I also note that OCFS2 use the same approach. In the future I'd like to solve the problem by shrinking down the size of the members of the i_alloc structure, but for now, this reduces the immediate problem of using too much low-memory on x86 and doesn't add too much overhead. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Although the values were all being calculated correctly, there was a race in the assert due to the way it was using atomic variables. This changes the value we assert on so that we get the same effect by testing a different variable. This prevents the assert triggering when it shouldn't. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
This patch fixes a couple of problems which affected the execution of files on GFS2. The first is that there was a corner case where inodes were not always uptodate at the point at which permissions checks were being carried out, this was resulting in refusal of execute permission, but only on the first lookup, subsequent requests worked correctly. The second was a problem relating to incorrect updating of file sizes which was introduced with the write_begin/end code for GFS2 a little while back. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Cc: Abhijith Das <adas@redhat.com>
-
由 Bob Peterson 提交于
Here is a patch for the latest upstream GFS2 code: The journal extent map needs to be initialized sooner than it currently is. Otherwise failed mount attempts (e.g. not enough journals, etc.) may panic trying to access the uninitialized list. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
To improve performance on NUMA, we use the VM's standard page migration for writeback and ordered pages. Probably we could also do the same for journaled data, but that would need a careful audit of the code, so will be the subject of a later patch. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The go_drop_th function is never called or referenced. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
A missing offset in the calculation. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This is a small correction to my previously posted patch1. It just changes a divide to a shift. It's faster and doesn't introduce odd dependencies on 32-bit compiles. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch eliminates the unneeded sd_statfs_mutex mutex but preserves the ordering as discussed. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch optimizes function gfs2_meta_read. Basically, gfs2_meta_wait was being called regardless of whether a disk read was requested. This just pulls that wait into the if that triggers the read. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
Function gfs2_block_map was often looking up the disk inode twice. This optimizes it so that only does it once. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch optimizes the function gfs2_glmutex_lock. The basic theory is: Why bother initializing a holder, setting up wait bits and then waiting on them, if you know the glock can be yours. So the holder stuff is placed inside the if checking if the glock is locked. This one needs careful scrutiny because changing anything to do with locking should strike terror into one's heart. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
I eliminated the passing of an unused parameter into gfs2_bitfit called rgd. This also changes the gfs2_bitfit code that searches for free (or used) blocks. Before, the code was trying to check for bytes that indicated 4 blocks in the undesired state. The problem is, it was spending more time trying to do this than it actually was saving. This version only optimizes the case where we're looking for free blocks, and it checks a machine word at a time. So on 32-bit machines, it will check 32-bits (16 blocks) and on 64-bit machines, it will check 64-bits (32 blocks) at a time. The compiler optimizes that quite well and we save some time, especially when running through full bitmaps (like the bitmaps allocated for the journals). There's probably a more elegant or optimized way to do this, but I haven't thought of it yet. I'm open to suggestions. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This just eliminates an unused variable from the quota code. Not likely to be a time saver. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch saves a little time when gfs2 writes to the journals by keeping a mapping between logical and physical blocks on disk. That's better than constantly looking up indirect pointers in buffers, when the journals are several levels of indirection (which they typically are). Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Bob Peterson 提交于
This patch is just a cleanup. Function gfs2_get_block() just calls function gfs2_block_map reversing the last two parameters. By reversing the parameters, gfs2_block_map() may be called directly and function gfs2_get_block may be eliminated altogether. Since this function is done for every block operation, this streamlines the code and makes it a little bit more efficient. Signed-off-by: NBob Peterson <rpeterso@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
The fl_owner is that of lockd when posix locks arrive from nfs clients, so it can't be used to distinguish between lock holders. Use fl_pid as owner instead; it's the pid of the process on the nfs client. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Abhijith Das 提交于
A certain scenario in the rename code path triggers a kernel BUG() because it accidentally does recursive locking The first lock is requested to unlink an already existing inode (replacing a file) and the second lock is requested when the destination directory needs to alloc some space. It is rare that these two events happen during the same rename call, and even more rare that these two instances try to lock the same rgrp. It is, however, possible. https://bugzilla.redhat.com/show_bug.cgi?id=404711Signed-off-by: NAbhijith Das <adas@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Wendy Cheng 提交于
GFS2 supports two modes of locking - lock_nolock for single node filesystem and lock_dlm for cluster mode locking. The gfs2 lock methods are removed from file operation table for lock_nolock protocol. This would allow VFS to handle posix lock and flock logics just like other in-tree filesystems without duplication. Signed-off-by: NS. Wendy Cheng <wcheng@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Fabio M. Di Nitto 提交于
Signed-off-by: NFabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Fabio Massimo Di Nitto 提交于
Hi Steven, Steven Whitehouse wrote: > Hi, > > Now in the -nmw git tree. Thanks, > > Steve. > > On Wed, 2007-11-21 at 11:54 -0600, Ryan O'Hara wrote: this patch introduces a bunch of build warnings by leaving around struct inode *inode = &ip->i_inode; The patch in attachment cleans them up. Please apply. Signed-off-by: NFabio Massimo Di Nitto <fabbione@ubuntu.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Ryan O'Hara 提交于
Remove read/write permission() checks from xattr operations. VFS layer is already handling permission for xattrs via the xattr_permission() call, so there is no need for gfs2 to check permissions. Futhermore, using permission() for SELinux xattrs ops is incorrect. Signed-off-by: NRyan O'Hara <rohara@redhat.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Fabio Massimo Di Nitto 提交于
The issue is indeed UP vs SMP and it is totally random. spin_is_locked() is a bad assertion because there is no correct answer on UP. on UP spin_is_locked() has to return either one value or another, always. This means that in my setup I am lucky enough to trigger the issue and your you are lucky enough not to. the patch in attachment removes the bogus calls to BUG_ON and according to David (in CC and thanks for the long explanation on the problem) we can rely upon things like lockdep to find problem that might be trying to catch. Signed-off-by: NFabio M. Di Nitto <fabbione@ubuntu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 David Teigland 提交于
Print error with log_error() to be consistent with others. Signed-off-by: NDavid Teigland <teigland@redhat.com> Signed-off-by: NFabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-