- 19 2月, 2006 10 次提交
-
-
由 Sam Ravnborg 提交于
Section mismatch is identified as references to .init* sections from non .init sections. And likewise references to .exit.* sections outside .exit sections. .init.* sections are discarded after a module is initialized and references to .init.* sections are oops candidates. .exit.* sections are discarded when a module is built-in and thus references to .exit are also oops candidates. The checks were possible to do using 'make buildcheck' which called the two perl scripts: reference_discarded.pl and reference_init.pl. This patch just moves the same functionality inside modpost and the scripts are then obsoleted. They will though be kept for a while so users can do double checks - but note that some .o files are skipped by the perl scripts so result is not 1:1. All credit for the concept goes to Keith Owens who implemented the original perl scrips - this patch just moves it to modpost. Compared to the perl script the implmentation in modpost will be run for each kernel build - thus catching the error much sooner, but the downside is that the individual .o file are not always identified. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Following patch enables depmod support when installing external modules. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
To avoid stale modules located in $(MODVERDIR) aka .tmp_versions/ always delete the directory when building an external module. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Martin Michlmayr 提交于
uname -m on MIPS can give a number of results, such as mips64. We need to add another substitution to the sed call for SUBARCH in the main Makefile. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Zach Brown 提交于
This matches the fix for a bug seen on x86-64. Test booted on old hardware that had 32 byte cachelines to begin with. Signed-off-by: NZach Brown <zach.brown@oracle.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
In modpost introduce a check for symbols exported twice. This check caught only one victim (inet_bind_bucket_create) for which a patch is already sent to netdev. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
With following patch a second option is enabled to obtain symbol information from a second external module when a external module is build. The recommended approach is to use a common kbuild file but that may be impractical in certain cases. With this patch one can copy over a Module.symvers from one external module to make symbols (and symbol versions) available for another external module. Updated documentation in Documentation/kbuild/modules.txt Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Just some light CodingStyle updates - no functional changes. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
modpost.c provides warn() and fatal() - so use them all over the place. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Support building individual files when dealing with separate modules. So say you have a module named "foo" which consist of two .o files bar.o and fun.o. You can then do: make -C $KERNELSRC M=`pwd` bar.o make -C $KERNELSRC M=`pwd` bar.lst make -C $KERNELSRC M=`pwd` bar.i make -C $KERNELSRC M=`pwd` / <= will build all .o files and link foo.o make -C $KERNELSRC M=`pwd` foo.ko <= will build the module and do the modpost step to create foo.ko The above will also work if the external module is placed in a subdirectory using a hirachy of kbuild files. Thanks to Andreas Gruenbacher <agruen@suse.de> for initial feature request / bug report. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 18 2月, 2006 30 次提交
-
-
由 Linus Torvalds 提交于
-
由 Bjorn Helgaas 提交于
acpi_rs_get_list_length() needs to account for all the vendor-defined data bytes. Failing to include these causes buffers to be sized too small, which causes slab corruption when we later convert AML to resources and run off the end of the buffer. This causes slab corruption on machines that use ACPI vendor-defined resources. All HP ia64 machines do, and I'm told that some NEC machines may as well. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Wright 提交于
Make sure maxnodes is safe size before calculating nlongs in get_nodes(). Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
I got all of these backwards. We want to return min(input timeout, new timeout) to userspace to prevent increasing the time-remaining value. Thanks to Ernst Herzberg <earny@net4u.de> for reporting and diagnosing. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Gibson 提交于
One of the parameters to the __pud_free_tlb() macro for powerpc is incorrect (see patch) . We get away with it by accident, because the one place the macro is called, the second parameter is a variable named "pud". Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tim Hockin 提交于
Don't print KERN_INFO in the middle of a printk line. printk(KERN_INFO "OEM ID: %s ",str); is just above this. This is already fixed up in i386 copy. Signed-off-by: NMartin J. Bligh <mbligh@google.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Berg 提交于
The windfarm_pm112 module relies on smu_sat_get_sdb_partition which is in windfarm_smu_sat.c but is not exported to modules, so despite Kconfig having the option to build the pm112 as modules, this can never be loaded. This patch fixes that by exporting smu_sat_get_sdb_partition with EXPORT_SYMBOL_GPL Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
There's a rather theoretical case of the BUG triggering in fuse_reset_request(): - iget() fails because of OOM after a successful CREATE_OPEN request - during IO on the resulting RELEASE request the connection is aborted Fix and add warning to fuse_reset_request(). Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rafael J. Wysocki 提交于
Restore the compatibility with the older code and make it possible to suspend if the kernel command line doesn't contain the "resume=" argument Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heiko Carstens 提交于
Just rename the compat system call to keep the name consistent with all the other *64 compat system calls. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Cornelia Huck 提交于
Fix assignment instead of check in ccw_device_set_online(). Also remove unneeded assignment in ccw_device_do_sense(). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heiko Carstens 提交于
The last changes that introduced the additional_cpus command line parameter also introduced a regression regarding smp initialization speed. In smp_setup_cpu_possible_map() cpu_present_map is set to the same value as cpu_possible_map. Especially that means that bits in the present map will be set for cpus that are not present. This will cause a slow down in the initial cpu_up() loop in smp_init() since trying to take cpus online that aren't present takes a while. Fix this by setting only bits for present cpus in cpu_present_map and set cpu_present_map to cpu_possible_map in smp_cpus_done(). Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heiko Carstens 提交于
Introduce possible_cpus command line option. Hard sets the number of bits set in cpu_possible_map. Unlike the additional_cpus parameter this one guarantees that num_possible_cpus() will stay constant even if the system gets rebooted and a different number of cpus are present at startup. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heiko Carstens 提交于
Introduce additional_cpus command line option. By default no additional cpu can be attached to the system anymore. Only the cpus present at IPL time can be switched on/off. If it is desired that additional cpus can be attached to the system the maximum number of additional cpus needs to be specified with this option. This change is necessary in order to limit the waste of per_cpu data structures. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heiko Carstens 提交于
Set preempt_count of idle_thread to zero before switching off cpu. Otherwise the preempt_count will be wrong if the cpu is switched on again since the thread will be reused. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Cornelia Huck 提交于
If __ccw_device_disband_start() fails to initiate disbanding, it should finish with ccw_device_disband_done() (which leaves the device in offline state) instead of ccw_device_verify_done() (which leaves the device in online state). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Heiko Carstens <heiko.carstens@de.ibm.com> wrote: The boot sequence on s390 sometimes takes ages and we spend a very long time (up to one or two minutes) in calibrate_migration_costs. The time spent there differs from boot to boot. Also the calculated costs differ a lot. I've seen differences by up to a factor of 15 (yes, factor not percent). Also I doubt that making these measurements make much sense on a completely virtualized architecture where you cannot tell how much cpu time you will get anyway. So introduce the CONFIG_DEFAULT_MIGRATION_COST method for an architecture to set the scheduler migration costs. This turns off automatic detection of migration costs. Makes sense on virtual platforms, where migration costs are hard to measure accurately. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
Jean-Luc Leger <reiga@dspnet.fr.eu.org> found this obvious typo. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marcel Selhorst 提交于
Fix IO-port leakage from request_region in case of error during TPM initialization, adds more pnp-verification and fixes a WTX-bug. Signed-off-by: NMarcel Selhorst <selhorst@crypto.rub.de> Acked-by: NKylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Staubach 提交于
Fix a deadlock possible in the ext2 file system implementation. This deadlock occurs when a file is removed from an ext2 file system which was mounted with the "sync" mount option. The problem is that ext2_xattr_delete_inode() was invoking the routine, sync_dirty_buffer(), using a buffer head which was previously locked via lock_buffer(). The first thing that sync_dirty_buffer() does is to lock the buffer head that it was passed. It does this via lock_buffer(). Oops. The solution is to unlock the buffer head in ext2_xattr_delete_inode() before invoking sync_dirty_buffer(). This makes the code in ext2_xattr_delete_inode() obey the same locking rules as all other callers of sync_dirty_buffer() in the ext2 file system implementation. Signed-off-by: NPeter Staubach <staubach@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Albert Lee 提交于
- Fix the array index value in ata_rwcmd_protocol() for the added FUA commands. - Filter out ATAPI packet command error messages in ata_pio_error() Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Linus Torvalds 提交于
-
由 Dan Williams 提交于
* libata does not care about error interrupts, so handle them locally * the interrupts that are ignored only appear to happen at init time Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Linus Torvalds 提交于
Change the find_next_best_node algorithm to correctly skip over holes in the node online mask. Previously it would not handle missing nodes correctly and cause crashes at boot. [Written by Linus, tested by AK] Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jay Vosburgh 提交于
bond_release returns EINVAL without releasing the bond lock if the slave device is not being bonded by the bond. The following patch ensures that the lock is released in this case. Signed-off-by: NStephen J. Bevan <stephen@dino.dnsalias.com> Acked-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Frank Pavlic 提交于
[patch 2/2] s390: some qeth driver fixes From: Frank Pavlic <fpavlic@de.ibm.com> - fixed kernel panic when using EDDP support in Layer 2 mode - NULL pointer exception in qeth_set_offline fixed. - setting EDDP in Layer 2 mode did not set NETIF_F_(SG/TSO) flags when device became online. - use sscanf for parsing and converting IPv4 addresses from string to __u8 values. - qeth_string_to_ipaddr6 fixed. in case of double colon the converted IPv6 address out from the string was not correct in previous implementation. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 112 +++++++++++++++++++++++++----------------------------------- qeth_eddp.c | 11 ++++- qeth_main.c | 17 +++------ 3 files changed, 63 insertions(+), 77 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Frank Pavlic 提交于
[patch 1/2] s390: lcs performance enhancements From: Klaus Wacker <kdwacker@de.ibm.com> - When flood pinging (with large packet size) an LCS device, about 90 % of all packets are dropped by driver. - increased number of lcs IO buffers to 32. - use netif_stop_queue/netif_wake_queue in lcs_start_xmit routine - don't lock the whole xmit routine but just the piece of code where tx_buffer is touched. Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com> diffstat: lcs.c | 31 +++++++++++++++++-------------- lcs.h | 2 +- 2 files changed, 18 insertions(+), 15 deletions(-) Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
由 Andrew Morton 提交于
drivers/net/tokenring/smctr.c: In function `smctr_load_firmware': drivers/net/tokenring/smctr.c:2981: warning: assignment discards qualifiers from pointer target type Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-