- 21 1月, 2010 2 次提交
-
-
由 Tero Kristo 提交于
Enable the auto-idle feature of the SCM block to save some additional power. Signed-off-by: NMika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Tero Kristo 提交于
Suspending drivers may still generate interrupts just before their suspend is completed. Any pending interrupts here will prevent sleep. Signed-off-by: NTero Kristo <tero.kristo@nokia.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 13 1月, 2010 2 次提交
-
-
由 Russell King 提交于
A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The __kuser_cmpxchg code uses an ARMv6 dmb instruction, rather than one based upon the architecture being built for. Switch to using the macro provided for this purpose, which also eliminates the need for an ifdef. Acked-by: NNicolas Pitre <nico@fluxnic.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 12 1月, 2010 2 次提交
-
-
由 Albin Tonnerre 提交于
- changes to ach/arch/boot/Makefile to make it easier to add new compression types - new piggy.lzo.S necessary for lzo compression - changes in arch/arm/boot/compressed/misc.c to allow the use of lzo or gzip, depending on the config - Kconfig support Signed-off-by: NAlbin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: NWu Zhangjin <wuzhangjin@gmail.com> Acked-by: N"H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: NRussell King <rmk@arm.linux.org.uk> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andreas Fenkart 提交于
Makes it consistent with the extern declaration, used when CONFIG_HIGHMEM is set Removes redundant casts in printout messages Signed-off-by: NAndreas Fenkart <andreas.fenkart@streamunlimited.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 1月, 2010 1 次提交
-
-
由 Colin Tuckley 提交于
Extend the patch from Philby John to the other "RealView" boards. Rename the constants and offsets to reflect their actual functions. Cc: Philby John <pjohn@in.mvista.com> Signed-off-by: NColin Tuckley <colin.tuckley@arm.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 1月, 2010 3 次提交
-
-
由 Santosh Shilimkar 提交于
The file arch/arm/include/asm/cpu.h needs to include 'linux/cpu.h' to meet its dependency. Otherwise when using "struct cpuinfo_arm" and including just 'asm/cpu.h' throws below error - arch/arm/include/asm/cpu.h:16: error: field 'cpu' has incomplete type To fix this otherway, one can also include both linux/cpu.h and asm/cpu.h but it shoudn't be that way. So this patch fixes this by including the linux/cpu.h in asm/cpu.h, so that including alone asm/cpu.h is enough. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Peter Hüwe 提交于
This patch fixes a build failure [1] due to missing includes This should make the arm tree build again with lpd7a404_defconfig References: http://kisskb.ellerman.id.au/kisskb/buildresult/1983329/Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Peter Hüwe 提交于
A lot of ARM-defconfigs (those without CONFIG_ISA_DMA_API set) fail to build [1][2][3] due to the changes of the patch [PATCH] PCI: Clean up build for CONFIG_PCI_QUIRKS unset by Rafael J. Wysocki (Sat, 2 Jan 2010 22:57:24 +0100) [4] as the referenced variable 'isa_dma_bridge_buggy' in asm/dma.h is enclosed by the CONFIG_ISA_DMA_API conditional all configs without this setting fail to build. I'm not sure wether moving the condition is the right way to solve the issue, but atleast it fixes the issue :) References: [1] http://kisskb.ellerman.id.au/kisskb/buildresult/1983354/ [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1983333/ [3] http://kisskb.ellerman.id.au/kisskb/buildresult/1983337/ [4] http://lkml.org/lkml/2010/1/2/102Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 1月, 2010 29 次提交
-
-
由 Paul Walmsley 提交于
Dynamically allocate the CPUFreq frequency table on OMAP2xxx chips. This fixes some compilation problems, since the kernel may not know what chip it is running on until boot-time. This also reduces the size of the CPUFreq frequency table. Problem originally reported by Felipe Balbi <felipe.balbi@nokia.com>. Thanks also for comments on the patch from Felipe and Kevin. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
-
由 Paul Walmsley 提交于
A subsequent patch adds code on OMAP2xxx to dynamically allocate the CPUFreq frequency table in clk_init_cpufreq_table(), so for it to avoid a leak, it will need a corresponding function to free the memory. This patch adds clk_exit_cpufreq_table() with generic code to call a chip-specific variant inside the clockfw_lock spinlock via struct clk_functions. Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
Revise some of the comments in the OMAP2xxx OPP data for clarity. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
-
由 Felipe Balbi 提交于
if we enable CPUFREQ we can't build omap2 for two reasons, one of them is fixed by the patch below. It's failing because the __must_be_array() check in ARRAY_SIZE() is failing and printing the following message: arch/arm/mach-omap2/clock2xxx.c:453: error: negative width in bit-field '<anonymous>' Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> [paul@pwsan.com: commit message updated; changed rate variable name] Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Cory Maccarrone 提交于
Commit 52650505 added an __initdata decoration to the structure containing the clk_enable and clk_disable functions. Once init data was freed, these pointers went to null, and the next enable or disable call caused the kernel to crash. This change removes this decoration. Signed-off-by: NCory Maccarrone <darkstar6262@gmail.com> [paul@pwsan.com: patch manually split and commit message edited] Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Cory Maccarrone 提交于
This change adds in some missing clocks that were needed as a result of 526505... (OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c). Prior to this, it was just assumed that these clocks existed for all devices, and it was used directly instead of calling it out with a clock_get call or similar. So, not having the CK_7XX meant these clocks weren't being used anymore for omap 7xx devices, which broke things badly. Signed-off-by: NCory Maccarrone <darkstar6262@gmail.com> [paul@pwsan.com: commit message edited] Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
The only symbols that should be exported are symbols that are to be called from loadable kernel modules, e.g., device drivers. In the context of plat-omap/clock.c, these should only be the Linux clock interface symbols as defined by include/linux/clk.h. Core code doesn't need these symbols to be exported. Also, clean up an old comment while here. Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Tuukka Toivonen 提交于
Add necessary definitions to clock framework to allow changing dpll4_m5_ck rate. This is used by the camera code. Signed-off-by: NJouni Högander <jouni.hogander@nokia.com> Signed-off-by: NTuukka Toivonen <tuukka.o.toivonen@nokia.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
The correct parent of the McBSP 2, 3, and 4 functional clocks is PER_96M_FCLK, not CORE_96M_FCLK. Fix this in the OMAP clock tree. Reported by Nicole Chalhoub <n-chalhoub@ti.com>. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Nicole Chalhoub <n-chalhoub@ti.com>
-
由 Kevin Hilman 提交于
UART1 & 2 were missing clockdomains resulting in broken omap_hwmod init for these devices. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
Commit 10db25fe causes the following kernel messages during N800 boot (and presumably all other 2420 boards): [ 0.000000] BUG: mapping for 0x58000000 at 0xe0000000 overlaps vmalloc space [ 0.000000] BUG: mapping for 0x59000000 at 0xe1000000 overlaps vmalloc space [ 0.000000] BUG: mapping for 0x5a000000 at 0xe2000000 overlaps vmalloc space Fix by remapping the IVA memory areas somewhere outside vmalloc space. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com>
-
由 Paul Walmsley 提交于
Out of the three major OMAP2 chip types, OMAP2420, OMAP2430, and OMAP3430, we only map the IVA on OMAP2420. The memory mapping is not shared between OMAP2420 and OMAP2430, so it is inappropriate to label those macros as '24XX'; this patch changes them to '2420'. Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Abhijit Pagare 提交于
In OMAP2/3 some of the clock-domains which did not have control facility were being falsely written to and read using the CM_CLKSTCTRL register though it did not exist for them. One check is added to remove this flaw. Signed-off-by: NAbhijit Pagare <abhijitpagare@ti.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com>
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in arch/arm/mach-omap2/clock34xx.c arch/arm/mach-omap2/io.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Vaibhav Hiremath 提交于
Without this the kernel doesn't boot, it craches in omap_mux_package_fixup(), since the package_subset becomes NULL. Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Otherwise bringing up new boards can be harder: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.33-rc2-00015-g0bc9c93-dirty #37) PC is at omap_mux_init+0xa4/0x3d8 LR is at omap_mux_init+0x3c/0x3d8 ... Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Roel Kluin 提交于
`!' has a higher precedence than `&' so parentheses are required. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Roel Kluin 提交于
not(!) has a higher precedence than bit and(&). Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Vimal Singh 提交于
Keys: 'right arrow', 'up arrow' and 'select' were mapped wrongly. This patch corrects them. This patch also adds one missing key present in the board, currently I added it as 'unknown' key, as I am not able to find proper description for this key. One key entry (r: 7, c: 5) is present in the keymap, which is really not present in the board, removing it. Signed-off-by: NVimal Singh <vimalsingh@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Alexander Shishkin 提交于
Commit f62349ee makes it possible to have some other than first uart port as ttyS0, which breaks the workaround serial_in_override() function which will try to address the first uart port (for ttyS0) and not the one that was initialized. Signed-off-by: NAlexander Shishkin <virtuoso@slind.org> CC: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Acked-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Commit 9905a43b made struct backlight_ops const. Omap was setting check_fb dynamically, which caused the following compile error: drivers/video/backlight/omap1_bl.c: In function 'omapbl_probe': drivers/video/backlight/omap1_bl.c:142: error: assignment of read-only variable 'omapbl_ops' Turns out pdata->check_fb is not being used, so just remove it to fix the compile. Cc: Emese Revfy <re.emese@gmail.com> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Cory Maccarrone 提交于
Commit 35c9049b added drivers/spi/omap_spi_100k.c. This patch add the related clocks and pin muxing entries to make the driver work on omap7xx platforms. Signed-off-by: NCory Maccarrone <darkstar6262@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Flags is not used on 15xx. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Roel Kluin 提交于
obj can't be both NULL and be an error pointer. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Cory Maccarrone 提交于
Some chips, namely any OMAP1 chips using METHOD_MPUIO, OMAP15xx and OMAP7xx, cannot be setup to respond to on-chip GPIO interrupts in both rising and falling edge directions -- they can only respond to one direction or the other, depending on how the ICR is configured. Additionally, current code forces rising edge detection if both flags are specified: if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; This change implements a toggle function that will modify the ICR to flip the direction of interrupt for IRQs that are requested with both rising and falling flags. The toggle function is not called for chips and GPIOs it does not apply to through the use of a flip_mask that's added on a per-bank basis. The mask is only set for those GPIOs where a toggle is necessary. Edge detection starts out the same as above with FALLING mode first. The toggle happens on EACH interrupt; without it, we have the following sequence of actions on GPIO transition: ICR GPIO Result 0x1 0 -> 1 (rising) Interrupt 0x1 1 -> 0 (falling) No interrupt (set ICR to 0x0 manually) 0x0 0 -> 1 (rising) No interrupt 0x0 1 -> 0 (falling) Interrupt That is, with the ICR set to 1 for a gpio, only rising edge interrupts are caught, and with it set to 0, only falling edge interrupts are caught. If we add in the toggle, we get this: ICR GPIO Result 0x1 0 -> 1 (rising) Interrupt (ICR set to 0x0) 0x0 1 -> 0 (falling) Interrupt (ICR set to 0x1) 0x1 0 -> 1 ... so, both rising and falling are caught, per the request for both (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING). Signed-off-by: NCory Maccarrone <darkstar6262@gmail.com> Acked-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Janusz Krzysztofik 提交于
In its current form, the omap_mcbsp_request() function can return after irq_request() failure without any cleanups, effectively locking out the port forever with clocks left running. Fix it. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Rabin Vincent 提交于
Fix the following warning, which appears when the register dump for a faulting process is printed in a kernel with SMP, DEBUG_PREEMPT, and DEBUG_USER (with user_debug=31) enabled: BUG: using smp_processor_id() in preemptible [00000000] code: init/1 caller is __show_regs+0x18/0x234 Backtrace: [<c0159e5c>] (dump_backtrace+0x0/0x114) from [<c01faf30>] (dump_stack+0x18/0x1c) r6:c781a000 r5:c0157544 r4:00000001 r3:00000000 [<c01faf18>] (dump_stack+0x0/0x1c) from [<c01e5230>] (debug_smp_processor_id+0xc4/0xf8) [<c01e516c>] (debug_smp_processor_id+0x0/0xf8) from [<c0157544>] (__show_regs+0x18/0x234) r6:c781bfb0 r5:00000000 r4:c781bfb0 r3:00000000 [<c015752c>] (__show_regs+0x0/0x234) from [<c01577a0>] (show_regs+0x40/0x50) [<c0157760>] (show_regs+0x0/0x50) from [<c015c968>] (__do_user_fault+0x5c/0xa4) r4:c781c000 r3:00000000 [<c015c90c>] (__do_user_fault+0x0/0xa4) from [<c015cbe0>] (do_page_fault+0x1b4/0x1e4) r7:00000000 r6:00010000 r5:c781bfb0 r4:c781c000 [<c015ca2c>] (do_page_fault+0x0/0x1e4) from [<c01554c8>] (do_DataAbort+0x3c/0xa0) [<c015548c>] (do_DataAbort+0x0/0xa0) from [<c01560c4>] (ret_from_exception+0x0/0x10) Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Walleij 提交于
This updates the U300 defconfig to include the DMA driver merged in 2.6.33-rc1 and adds a codepage that's needed to mount VFAT MMC cards as default. The rest is new config options. Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jamie Iles 提交于
Make registers unsigned for kernel space. This is important for example in the perf events where the PC is stored into a u64. We don't want it sign extended so make the regs unsigned to prevent casts throughout the kernel. Signed-off-by: NJamie Iles <jamie.iles@picochip.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 08 1月, 2010 1 次提交
-
-
由 Cyril Hrubis 提交于
Somehow, strange characters made their way zaurus gpio .desc fields. Fix it. Signed-off-by: NPavel Machek <pavel@ucw.cz> Acked-by: NStanislav Brabec <utx@penguin.cz> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-