- 24 5月, 2008 40 次提交
-
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
no need to backmerge, only affects ftrace-enabled kernels. (which is not the default) Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This patch is the correct way to have tracing enabled by default. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Since ftrace touches practically every function. If we detect any anomaly, we want to fully disable ftrace. This patch adds code to try shutdown ftrace as much as possible without doing any more harm is something is detected not quite correct. This only kills ftrace, this patch does have checks for other parts of the tracer (irqsoff, wakeup, etc.). Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
The ftrace dynamic function update allocates a record to store the instruction pointers that are being modified. If the modified instruction pointer fails to update, then the record is marked as failed and nothing more is done. Worse, if the modification fails, but the record ip function is still called, it will allocate a new record and try again. In just a matter of time, will this cause a serious memory leak and crash the system. This patch plugs this memory leak. When a record fails, it is included back into the pool of records to be used. Now a record may fail over and over again, but the number of allocated records will not increase. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Some fixes for better output with the trace pipe. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
should be an irq-safe lock ... Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
for ad-hoc tracing. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
remove idx syncing - it's expensive on SMP. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
implement globally synchronized, fast and scalable time source for tracing. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
rename and uninline now() to ftrace_now(). Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
no code changed. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
we can hold all cpu trace buffer locks at once - put each into a separate lock class. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This patch creates a file called trace_pipe in the tracing debug directory. This file is a consumer of the trace buffers. This means that reads of this file consumes the entries from the trace buffers so that they will not be read a second time, as contrast to the static buffers latency_trace and trace. Reading from the trace_pipe will remove the entries from trace and latency_trace too. The advantage that trace_pipe has is that it can record live traces. It will block when there is nothing in the buffer, and read the entries as they are entered. An EOF happens when tracing is disabled (tracing_enabled = 0). Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Later patches will need to print the same things as the seq output does. But those outputs will not use the seq utility. This patch adds a buffer to the iterator, that can be used by either the seq utility or other output. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This patch changes the way the CPU trace buffers are handled. Instead of always starting from the trace page head, the logic is changed to a producer consumer logic. This allows for the buffers to be drained while they are alive. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
The tests may leave stuff in the buffers. This resets the buffers after each test is run. If a test fails, it does not reset the buffer to avoid touching a buffer that is corrupted. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
If the trace buffer is detected to be corrupted, then we disable all tracers. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
fix time offset calculations and ordering, plus make code more consistent. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This patch adds a startup self test on dynamic code modification and filters. The test filters on a specific function, makes sure that no other function is traced, exectutes the function, then makes sure that the function is traced. This patch also fixes a slight bug with the ftrace selftest, where tracer_enabled was not being set. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
make it easier for newbies to find their way around. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
factor out code and clean it up. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This patch fixes some bugs to the updating of the max trace that was caused by implementing the new buffering. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Using raw_local_irq_save/restore confuses lockdep. It's fine to use the normal ones. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Add notrace annotations to lockdep to keep ftrace from causing recursive problems with lock tracing and debugging. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
The irqsoff function tracer did a __get_cpu_var to determine if it should trace the function or not. The problem is that __get_cpu_var can preempt between getting the CPU and reading the cpu variable. This means that the cpu variable that is being read is not from the cpu being run on. At worst, this can give a false positive, where we trace the function when we should not. It will never give a false negative since we only want to trace when interrupts are disabled and we never preempt when they are. This fix adds a check after reading the irq flags to only trace if the interrupts are actually disabled. It also changes the reading of the cpu variable to use a raw_smp_processor_id since we now don't care if we preempt. We still catch that fact. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
The debug smp_processor_id caused a recursive fault in debugging the irqsoff tracer. The tracer used a smp_processor_id in the ftrace callback, and this function called preempt_disable which also is traced. This caused a recursive fault (stack overload). Since using smp_processor_id without debugging on does not cause faults with the tracer (even when the tracer is wrong), the debug version should not cause a system reboot. This changes the debug_smp_processor_id to use the notrace versions of preempt_disable and enable. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
disable the tracer while kexec pulls the rug from under the old kernel. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Allocating large buffers for the tracer may fail easily. This patch converts the buffer from a large ordered allocation to single pages. It uses the struct page LRU field to link the pages together. Later patches may also implement dynamic increasing and decreasing of the trace buffers. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This patch adds two files to the debugfs system: /debugfs/tracing/available_filter_functions and /debugfs/tracing/set_ftrace_filter The available_filter_functions lists all functions that has been recorded by the ftraced that has called the ftrace_record_ip function. This is to allow users to see what functions have been converted to nops and can be enabled for tracing. To enable functions, simply echo the names (whitespace delimited) into set_ftrace_filter. Simple wildcards are also allowed. echo 'scheduler' > /debugfs/tracing/set_ftrace_filter Will have only the scheduler be activated when tracing is enabled. echo 'sched_*' > /debugfs/tracing/set_ftrace_filter Will have only the functions starting with 'sched_' be activated. echo '*lock' > /debugfs/tracing/set_ftrace_filter Will have only functions ending with 'lock' be activated. echo '*lock*' > /debugfs/tracing/set_ftrace_filter Will have only functions with 'lock' in its name be activated. Note: 'sched*lock' will not work. The only wildcards that are allowed is an asterisk and the beginning and or end of the string passed in. Multiple names can be passed in with whitespace delimited: echo 'scheduler *lock *acpi*' > /debugfs/tracing/set_ftrace_filter is also the same as: echo 'scheduler' > /debugfs/tracing/set_ftrace_filter echo '*lock' >> /debugfs/tracing/set_ftrace_filter echo '*acpi*' >> /debugfs/tracing/set_ftrace_filter Appending does just that. It appends to the list. To disable all filters simply echo an empty line in: echo > /debugfs/tracing/set_ftrace_filter Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-