No functionality change.
This is done as a preparation for VMCS shadowing virtualization.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No functionality change.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Expose VMCS shadowing to L1 as a VMX capability of the virtual CPU,
whether or not VMCS shadowing is supported by the physical CPU.
(VMCS shadowing emulation)

Shadowed VMREADs and VMWRITEs from L2 are handled by L0, without a
VM-exit to L1.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Do not forward VMREAD/VMWRITE VMExits to L1 if required so by vmcs12 vmread/vmwrite bitmaps

This is done as a preparation for VMCS shadowing emulation.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is done as a preparation to VMCS shadowing emulation.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This includes setting up the shadow VMCS and the secondary execution
controls in lib/vmx.c.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The shadow vmcs12 cannot be flushed on KVM_GET_NESTED_STATE,
because at that point guest memory is assumed by userspace to
be immutable.  Capture the cache in vmx_get_nested_state, adding
another page at the end if there is an active shadow vmcs12.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is done is done as a preparation to VMCS shadowing emulation.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Intel SDM considers these checks to be part of
"Checks on Guest Non-Register State".

Note that it is legal for vmcs->vmcs_link_pointer to be -1ull
when VMCS shadowing is enabled. In this case, any VMREAD/VMWRITE to
shadowed-field sets the ALU flags for VMfailInvalid (i.e. CF=1).
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No functionality change.
This is done as a preparation for VMCS shadowing emulation.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No functionality change.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For nested virtualization L0 KVM is managing a bit of state for L2 guests,
this state can not be captured through the currently available IOCTLs. In
fact the state captured through all of these IOCTLs is usually a mix of L1
and L2 state. It is also dependent on whether the L2 guest was running at
the moment when the process was interrupted to save its state.

With this capability, there are two new vcpu ioctls: KVM_GET_NESTED_STATE
and KVM_SET_NESTED_STATE. These can be used for saving and restoring a VM
that is in VMX operation.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NJim Mattson <jmattson@google.com>
[karahmed@ - rename structs and functions and make them ready for AMD and
             address previous comments.
           - handle nested.smm state.
           - rebase & a bit of refactoring.
           - Merge 7/8 and 8/8 into one patch. ]
Signed-off-by: NKarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If the vCPU enters system management mode while running a nested guest,
RSM starts processing the vmentry while still in SMM.  In that case,
however, the pages pointed to by the vmcs12 might be incorrectly
loaded from SMRAM.  To avoid this, delay the handling of the pages
until just before the next vmentry.  This is done with a new request
and a new entry in kvm_x86_ops, which we will be able to reuse for
nested VMX state migration.

Extracted from a patch by Jim Mattson and KarimAllah Ahmed.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The test calls KVM_RUN repeatedly, and creates an entirely new VM with the
old memory and vCPU state on every exit to userspace.  The kvm_util API is
expanded with two functions that manage the lifetime of a kvm_vm struct:
the first closes the file descriptors and leaves the memory allocated,
and the second opens the file descriptors and reuses the memory from
the previous incarnation of the kvm_vm struct.

For now the test is very basic, as it does not test for example XSAVE or
vCPU events.  However, it will test nested virtualization state starting
with the next patch.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The selftests were not munmap-ing the kvm_run area from the vcpu file descriptor.
The result was that kvm_vcpu_release was not called and a reference was left in the
parent "struct kvm".  Ultimately this was visible in the upcoming state save/restore
test as an error when KVM attempted to create a duplicate debugfs entry.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The allocation of the VMXON and VMCS is currently done twice, in
lib/vmx.c and in vmx_tsc_adjust_test.c.  Reorganize the code to
provide a cleaner and easier to use API to the tests.  lib/vmx.c
now does the complete setup of the VMX data structures, but does not
create the VM or set CPUID.  This has to be done by the caller.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The GDT and the TSS base were left to zero, and this has interesting effects
when the TSS descriptor is later read to set up a VMCS's TR_BASE.  Basically
it worked by chance, and this patch fixes it by setting up all the protected
mode data structures properly.

Because the GDT and TSS addresses are virtual, the page tables now always
exist at the time of vcpu setup.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Some of the MSRs returned by GET_MSR_INDEX_LIST currently cannot be sent back
to KVM_GET_MSR and/or KVM_SET_MSR; either they can never be sent back, or you
they are only accepted under special conditions.  This makes the API a pain to
use.

To avoid this pain, this patch makes it so that the result of the get-list
ioctl can always be used for host-initiated get and set.  Since we don't have
a separate way to check for read-only MSRs, this means some Hyper-V MSRs are
ignored when written.  Arguably they should not even be in the result of
GET_MSR_INDEX_LIST, but I am leaving there in case userspace is using the
outcome of GET_MSR_INDEX_LIST to derive the support for the corresponding
Hyper-V feature.

Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Linux does not support Memory Protection Extensions (MPX) in the
kernel itself, thus the BNDCFGS (Bound Config Supervisor) MSR will
always be zero in the KVM host, i.e. RDMSR in vmx_save_host_state()
is superfluous.  KVM unconditionally sets VM_EXIT_CLEAR_BNDCFGS,
i.e. BNDCFGS will always be zero after VMEXIT, thus manually loading
BNDCFGS is also superfluous.

And in the event the MPX kernel support is added (unlikely given
that MPX for userspace is in its death throes[1]), BNDCFGS will
likely be common across all CPUs[2], and at the least shouldn't
change on a regular basis, i.e. saving the MSR on every VMENTRY is
completely unnecessary.

WARN_ONCE in hardware_setup() if the host's BNDCFGS is non-zero to
document that KVM does not preserve BNDCFGS and to serve as a hint
as to how BNDCFGS likely should be handled if MPX is used in the
kernel, e.g. BNDCFGS should be saved once during KVM setup.

[1] https://lkml.org/lkml/2018/4/27/1046
[2] http://www.openwall.com/lists/kernel-hardening/2017/07/24/28Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Switch 'requests' to be explicitly 64-bit and update BUILD_BUG_ON check to
use the size of "requests" instead of the hard-coded '32'.

That gives us a bit more room again for arch-specific requests as we
already ran out of space for x86 due to the hard-coded check.

The only exception here is ARM32 as it is still 32-bits.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NKarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM is supposed to update some guest VM's CPUID bits (e.g. OSXSAVE) when
CR4 is changed. A bug was found in KVM recently and it was fixed by
Commit c4d21882 ("KVM: x86: Update cpuid properly when CR4.OSXAVE or
CR4.PKE is changed"). This patch adds a test to verify the synchronization
between guest VM's CR4 and CPUID bits.
Signed-off-by: NWei Huang <wei@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pull bug fixes into the KVM development tree to avoid nasty conflicts.

Merge tag 'kvm-s390-next-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Features for 4.19

- initial version for host large page support. Must be enabled with
  module parameter hpage=1 and will conflict with the nested=1
  parameter.
- enable etoken facility for guests
- Fixes

Merge tag 'kvm-ppc-next-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD

PPC KVM update for 4.19.

This update adds no new features; it just has some minor code cleanups
and bug fixes, including a fix to allow us to create KVM_MAX_VCPUS
vCPUs on POWER9 in all CPU threading modes.

Merge tag 'hlp_stage1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvms390/next

KVM: s390: initial host large page support

- must be enabled via module parameter hpage=1
- cannot be used together with nested
- does support migration
- does support hugetlbfs
- no THP yet

General KVM huge page support on s390 has to be enabled via the
kvm.hpage module parameter. Either nested or hpage can be enabled, as
we currently do not support vSIE for huge backed guests. Once the vSIE
support is added we will either drop the parameter or enable it as
default.

For a guest the feature has to be enabled through the new
KVM_CAP_S390_HPAGE_1M capability and the hpage module
parameter. Enabling it means that cmm can't be enabled for the vm and
disables pfmf and storage key interpretation.

This is due to the fact that in some cases, in upcoming patches, we
have to split huge pages in the guest mapping to be able to set more
granular memory protection on 4k pages. These split pages have fake
page tables that are not visible to the Linux memory management which
subsequently will not manage its PGSTEs, while the SIE will. Disabling
these features lets us manage PGSTE data in a consistent matter and
solve that problem.
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>

Let's allow huge pmd linking when enabled through the
KVM_CAP_S390_HPAGE_1M capability. Also we can now restrict gmap
invalidation and notification to the cases where the capability has
been activated and save some cycles when that's not the case.
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>

Guests backed by huge pages could theoretically free unused pages via
the diagnose 10 instruction. We currently don't allow that, so we
don't have to refault it once it's needed again.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>

Let's introduce an explicit check if skeys have already been enabled
for the vcpu, so we don't have to check the mm context if we don't have
the storage key facility.

This lets us check for enablement without having to take the mm
semaphore and thus speedup skey emulation.
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NFarhan Ali <alifm@linux.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

When doing skey emulation for huge guests, we now need to fault in
pmds, as we don't have PGSTES anymore to store them when we do not
have valid table entries.
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>

Storage keys for guests with huge page mappings have to be managed in
hardware. There are no PGSTEs for PMDs that we could use to retain the
guests's logical view of the key.
Signed-off-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>

Similarly to the pte skey handling, where we set the storage key to
the default key for each newly mapped pte, we have to also do that for
huge pmds.

With the PG_arch_1 flag we keep track if the area has already been
cleared of its skeys.
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>
Reviewed-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

When a guest starts using storage keys, we trap and set a default one
for its whole valid address space. With this patch we are now able to
do that for large pages.

To speed up the storage key insertion, we use
__storage_key_init_range, which in-turn will use sske_frame to set
multiple storage keys with one instruction. As it has been previously
used for debuging we have to get rid of the default key check and make
it quiescing.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
[replaced page_set_storage_key loop with __storage_key_init_range]
Reviewed-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>

To do dirty loging with huge pages, we protect huge pmds in the
gmap. When they are written to, we unprotect them and mark them dirty.

We introduce the function gmap_test_and_clear_dirty_pmd which handles
dirty sync for huge pages.
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>
Acked-by: NDavid Hildenbrand <david@redhat.com>

If the host invalidates a pmd, we also have to invalidate the
corresponding gmap pmds, as well as flush them from the TLB. This is
necessary, as we don't share the pmd tables between host and guest as
we do with ptes.

The clearing part of these three new functions sets a guest pmd entry
to _SEGMENT_ENTRY_EMPTY, so the guest will fault on it and we will
re-link it.

Flushing the gmap is not necessary in the host's lazy local and csp
cases. Both purge the TLB completely.
Signed-off-by: NJanosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: NDavid Hildenbrand <david@redhat.com>