Pull networking fixes from David Miller:

 1) Fix divide by zero in mlx5, from Talut Batheesh.

 2) Guard against invalid GSO packets coming from untrusted guests and
    arriving in qdisc_pkt_len_init(), from Eric Dumazet.

 3) Similarly add such protection to the various protocol GSO handlers.
    From Willem de Bruijn.

 4) Fix regression added to IGMP source address checking for IGMPv3
    reports, from Felix Feitkau.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tls: Correct length of scatterlist in tls_sw_sendpage
  be2net: restore properly promisc mode after queues reconfiguration
  net: igmp: fix source address check for IGMPv3 reports
  gso: validate gso_type in GSO handlers
  net: qdisc_pkt_len_init() should be more robust
  ibmvnic: Allocate and request vpd in init_resources
  ibmvnic: Revert to previous mtu when unsupported value requested
  ibmvnic: Modify buffer size and number of queues on failover
  rds: tcp: compute m_ack_seq as offset from ->write_seq
  usbnet: silence an unnecessary warning
  cxgb4: fix endianness for vlan value in cxgb4_tc_flower
  cxgb4: set filter type to 1 for ETH_P_IPV6
  net/mlx5e: Fix fixpoint divide exception in mlx5e_am_stats_compare

Commit bdcf0a42 ("kernel: make groups_sort calling a responsibility
group_info allocators") appears to break nfsd rootsquash in a pretty
major way.

It adds a call to groups_sort() inside the loop that copies/squashes
gids, which means the valid gids are sorted along with the following
garbage.  The net result is that the highest numbered valid gids are
replaced with any lower-valued garbage gids, possibly including 0.

We should sort only once, after filling in all the gids.

Fixes: bdcf0a42 ("kernel: make groups_sort calling a responsibility ...")
Signed-off-by: NBen Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In orangefs_devreq_read, there is a loop which picks an op off the list
of pending ops.  If the loop fails to find an op, there is nothing to
read, and it returns EAGAIN.  If the op has been given up on, the loop
is restarted via a goto.  The bug is that the variable which the found
op is written to is not reinitialized, so if there are no more eligible
ops on the list, the code runs again on the already handled op.

This is triggered by interrupting a process while the op is being copied
to the client-core.  It's a fairly small window, but it's there.
Signed-off-by: NMartin Brandenburg <martin@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

set_op_state_purged can delete the op.
Signed-off-by: NMartin Brandenburg <martin@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The scatterlist is reused by both sendmsg and sendfile.
If a sendmsg of smaller number of pages is followed by a sendfile
of larger number of pages, the scatterlist may be too short, resulting
in a crash in gcm_encrypt.

Add sg_unmark_end to make the list the correct length.

tls_sw_sendmsg already calls sg_unmark_end correctly when it allocates
memory in alloc_sg, or in zerocopy_from_iter.
Signed-off-by: NDave Watson <davejwatson@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 62219066 ("be2net: Request RSS capability of Rx interface
depending on number of Rx rings") modified be_update_queues() so the
IFACE (HW representation of the netdevice) is destroyed and then
re-created. This causes a regression because potential promiscuous mode
is not restored properly during be_open() because the driver thinks
that the HW has promiscuous mode already enabled.

Note that Lancer is not affected by this bug because RX-filter flags are
disabled during be_close() for this chipset.

Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>

Fixes: 62219066 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings")
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit "net: igmp: Use correct source address on IGMPv3 reports"
introduced a check to validate the source address of locally generated
IGMPv3 packets.
Instead of checking the local interface address directly, it uses
inet_ifa_match(fl4->saddr, ifa), which checks if the address is on the
local subnet (or equal to the point-to-point address if used).

This breaks for point-to-point interfaces, so check against
ifa->ifa_local directly.

Cc: Kevin Cernekee <cernekee@chromium.org>
Fixes: a46182b0 ("net: igmp: Use correct source address on IGMPv3 reports")
Reported-by: NSebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Validate gso_type during segmentation as SKB_GSO_DODGY sources
may pass packets where the gso_type does not match the contents.

Syzkaller was able to enter the SCTP gso handler with a packet of
gso_type SKB_GSO_TCPV4.

On entry of transport layer gso handlers, verify that the gso_type
matches the transport protocol.

Fixes: 90017acc ("sctp: Add GSO support")
Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com>
Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without proper validation of DODGY packets, we might very well
feed qdisc_pkt_len_init() with invalid GSO packets.

tcp_hdrlen() might access out-of-bound data, so let's use
skb_header_pointer() and proper checks.

Whole story is described in commit d0c081b4 ("flow_dissector:
properly cap thoff field")

We have the goal of validating DODGY packets earlier in the stack,
so we might very well revert this fix in the future.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jason Wang <jasowang@redhat.com>
Reported-by: syzbot+9da69ebac7dddd804552@syzkaller.appspotmail.com
Acked-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

John Allen says:

====================
ibmvnic: Reset behavior fixes

This patchset fixes a number of issues related to ibmvnic reset uncovered
from testing new Power9 machines with Everglades adapters and the new
functionality to change mtu and other parameters in the driver.

Changes since v1:
-In patch 1/3, added the line to free the long term buffers before
allocating a new one. This change inadvertently uncovered the problem
that the number of queues can change after a failover as well. To fix
this, we check whether or not the number of queues has changed in
do_reset and if they have, we do a full release and init of the queues.
-In patch 1/3, added variables to the adapter struct to track how
many rx/tx pools have actually been allocated and modify the release
pools routines to use these values rather than the possibly incorrect
req_rx/tx_queues values.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In reset events in which our memory allocations need to be reallocated,
VPD data is being freed, but never reallocated. This can cause issues if
we later attempt to access that memory or reset and attempt to free the
memory. This patch moves the allocation of the VPD data to init_resources
so that it will be symmetrically freed during release resources.
Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com>
Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we request an unsupported mtu value, the vnic server will suggest a
different value. Currently we take the suggested value without question
and login with that value. However, the behavior doesn't seem completely
sane as attempting to change the mtu to some specific value will change
the mtu to some completely different value most of the time. This patch
fixes the issue by logging in with the previously used mtu value and
printing an error message saying that the given mtu is unsupported.
Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com>
Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Using newer backing devices can cause the required padding at the end of
buffer as well as the number of queues to change after a failover.
Since we currently assume that these values never change, after a
failover to a backing device with different capabilities, we can get
errors from the vnic server, attempt to free long term buffers that are
no longer there, or not free long term buffers that should be freed.

This patch resolves the issue by checking whether any of these values
change, and if so perform the necessary re-allocations.
Signed-off-by: NJohn Allen <jallen@linux.vnet.ibm.com>
Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

rds-tcp uses m_ack_seq to track the tcp ack# that indicates
that the peer has received a rds_message. The m_ack_seq is
used in rds_tcp_is_acked() to figure out when it is safe to
drop the rds_message from the RDS retransmit queue.

The m_ack_seq must be calculated as an offset from the right
edge of the in-flight tcp buffer, i.e., it should be based on
the ->write_seq, not the ->snd_nxt.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

That a kevent could not be scheduled is not an error.
Such handlers must be able to deal with multiple events anyway.
As the successful scheduling of a work is a debug event, make
the failure debug priority, too.

V2: coding style
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Reported-by: NCristian Caravena <caravena@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-01-18

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a divide by zero due to wrong if (src_reg == 0) check in
   64-bit mode. Properly handle this in interpreter and mask it
   also generically in verifier to guard against similar checks
   in JITs, from Eric and Alexei.

2) Fix a bug in arm64 JIT when tail calls are involved and progs
   have different stack sizes, from Daniel.

3) Reject stores into BPF context that are not expected BPF_STX |
   BPF_MEM variant, from Daniel.

4) Mark dst reg as unknown on {s,u}bounds adjustments when the
   src reg has derived bounds from dead branches, from Daniel.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't change endianness when assigning vlan value in cxgb4_tc_flower
code when processing flow match parameters. The value gets converted
to network order as part of filtering code in set_filter_wr.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For ethtype_key = ETH_P_IPV6, set filter type as 1 in cxgb4_tc_flower
code when processing flow match parameters.
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The new helper would check if the pfn belongs to the page. For huge
pages it checks if the PFN is within range covered by the huge page.

The helper is used in check_pte(). The original code the helper replaces
had two call to page_to_pfn(). page_to_pfn() is relatively costly.

Although current GCC is able to optimize code to have one call, it's
better to do this explicitly.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tetsuo reported random crashes under memory pressure on 32-bit x86
system and tracked down to change that introduced
page_vma_mapped_walk().

The root cause of the issue is the faulty pointer math in check_pte().
As ->pte may point to an arbitrary page we have to check that they are
belong to the section before doing math. Otherwise it may lead to weird
results.

It wasn't noticed until now as mem_map[] is virtually contiguous on
flatmem or vmemmap sparsemem. Pointer arithmetic just works against all
'struct page' pointers. But with classic sparsemem, it doesn't because
each section memap is allocated separately and so consecutive pfns
crossing two sections might have struct pages at completely unrelated
addresses.

Let's restructure code a bit and replace pointer arithmetic with
operations on pfns.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-and-tested-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Acked-by: NMichal Hocko <mhocko@suse.com>
Fixes: ace71a19 ("mm: introduce page_vma_mapped_walk()")
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Helmut reported a bug about division by zero while
running traffic and doing physical cable pull test.

When the cable unplugged the ppms become zero, so when
dividing the current ppms by the previous ppms in the
next dim iteration there is division by zero.

This patch prevent this division for both ppms and epms.

Fixes: c3164d2f ("net/mlx5e: Added BW check for DIM decision mechanism")
Reported-by: NHelmut Grauer <helmut.grauer@de.ibm.com>
Signed-off-by: NTalat Batheesh <talatb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull x86 pti fixes from Thomas Gleixner:
 "A small set of fixes for the meltdown/spectre mitigations:

   - Make kprobes aware of retpolines to prevent probes in the retpoline
     thunks.

   - Make the machine check exception speculation protected. MCE used to
     issue an indirect call directly from the ASM entry code. Convert
     that to a direct call into a C-function and issue the indirect call
     from there so the compiler can add the retpoline protection,

   - Make the vmexit_fill_RSB() assembly less stupid

   - Fix a typo in the PTI documentation"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Optimize inline assembler for vmexit_fill_RSB
  x86/pti: Document fix wrong index
  kprobes/x86: Disable optimizing on the function jumps to indirect thunk
  kprobes/x86: Blacklist indirect thunk functions for kprobes
  retpoline: Introduce start/end markers of indirect thunk
  x86/mce: Make machine check speculation protected

Pull x86 kexec fix from Thomas Gleixner:
 "A single fix for the WBINVD issue introduced by the SME support which
  causes kexec fails on non AMD/SME capable CPUs. Issue WBINVD only when
  the CPU has SME and avoid doing so in a loop"

[ Side note: this patch fixes the problem, but it isn't entirely clear
  why it is required. The wbinvd should just work regardless, but there
  seems to be some system - as opposed to CPU - issue, since the wbinvd
  causes more problems later in the shutdown sequence, but wbinvd
  instructions while the system is still active are not problematic.

  Possibly some SMI or pending machine check issue on the affected system ]

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Rework wbinvd, hlt operation in stop_this_cpu()

Pull irq fix from Thomas Gleixner:
 "A single fix for the new matrix allocator to prevent vector exhaustion
  by certain network drivers which allocate gazillions of unused vectors
  which cannot be put into reservation mode due to MSI and the lack of
  MSI entry masking.

  The fix/workaround is to spread the vectors across CPUs by searching
  the supplied target CPU mask for the CPU with the smallest number of
  allocated vectors"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irq/matrix: Spread interrupts on allocation

Pull alpha fixes from Matt Turner:
 "A build fix and a regression fix"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha/PCI: Fix noname IRQ level detection
  alpha: extend memset16 to EV6 optimised routines

Commit bacf6b49 ("x86/mm: Use a struct to reduce parameters for SME
PGD mapping") moved some parameters into a structure.

The structure was large enough to trigger the stack protection canary in
sme_encrypt_kernel which doesn't work this early, causing reboots.

Mark sme_encrypt_kernel appropriately to not use the canary.

Fixes: bacf6b49 ("x86/mm: Use a struct to reduce parameters for SME PGD mapping")
Signed-off-by: NLaura Abbott <labbott@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The conversion of the alpha architecture PCI host bridge legacy IRQ
mapping/swizzling to the new PCI host bridge map/swizzle hooks carried
out through:

commit 0e4c2eeb ("alpha/PCI: Replace pci_fixup_irqs() call with
host bridge IRQ mapping hooks")

implies that IRQ for devices are now allocated through pci_assign_irq()
function in pci_device_probe() that is called when a driver matching a
device is found in order to probe the device through the device driver.

Alpha noname platforms required IRQ level programming to be executed
in sio_fixup_irq_levels(), that is called in noname_init_pci(), a
platform hook called within a subsys_initcall.

In noname_init_pci(), present IRQs are detected through
sio_collect_irq_levels() that check the struct pci_dev->irq number
to detect if an IRQ has been allocated for the device.

By the time sio_collect_irq_levels() is called, some devices may still
have not a matching driver loaded to match them (eg loadable module)
therefore their IRQ allocation is still pending - which means that
sio_collect_irq_levels() does not programme the correct IRQ level for
those devices, causing their IRQ handling to be broken when the device
driver is actually loaded and the device is probed.

Fix the issue by adding code in the noname map_irq() function
(noname_map_irq()) that, whilst mapping/swizzling the IRQ line, it also
ensures that the correct IRQ level programming is executed at platform
level, fixing the issue.

Fixes: 0e4c2eeb ("alpha/PCI: Replace pci_fixup_irqs() call with
host bridge IRQ mapping hooks")
Reported-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # 4.14
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Meelis Roos <mroos@linux.ee>
Signed-off-by: NMatt Turner <mattst88@gmail.com>

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - fix incorrect huge page mappings on systems using the contiguous
     hint for hugetlbfs
   - support alternative GICv4 init sequence
   - correctly implement the ARM SMCC for HVC and SMC handling

  PPC:
   - add KVM IOCTL for reporting vulnerability and workaround status

  s390:
   - provide userspace interface for branch prediction changes in
     firmware

  x86:
   - use correct macros for bits"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: wire up bpb feature
  KVM: PPC: Book3S: Provide information about hardware/firmware CVE workarounds
  KVM/x86: Fix wrong macro references of X86_CR0_PG_BIT and X86_CR4_PAE_BIT in kvm_valid_sregs()
  arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls
  KVM: arm64: Fix GICv4 init when called from vgic_its_create
  KVM: arm/arm64: Check pagesize when allocating a hugepage at Stage 2

Pull MIPS fixes from James Hogan:
 "Some final MIPS fixes for 4.15, including important build fixes and a
  MAINTAINERS update:

   - Add myself as MIPS co-maintainer.

   - Fix various all*config build failures (particularly as a result of
     switching the default MIPS platform to the "generic" platform).

   - Fix GCC7 build failures (duplicate const and questionable calls to
     missing __multi3 intrinsic on mips64r6).

   - Fix warnings when CPU Idle is enabled (4.14).

   - Fix AR7 serial output (since 3.17).

   - Fix ralink platform_get_irq error checking (since 3.12)"

* tag 'mips_fixes_4.15_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
  MAINTAINERS: Add James as MIPS co-maintainer
  MIPS: Fix undefined reference to physical_memsize
  MIPS: Implement __multi3 for GCC7 MIPS64r6 builds
  MIPS: mm: Fix duplicate "const" on insn_table_MM
  MIPS: CM: Drop WARN_ON(vp != 0)
  MIPS: ralink: Fix platform_get_irq's error checking
  MIPS: Fix CPS SMP NS16550 UART defaults
  MIPS: BCM47XX Avoid compile error with MIPS allnoconfig
  MIPS: RB532: Avoid undefined mac_pton without GENERIC_NET_UTILS
  MIPS: RB532: Avoid undefined early_serial_setup() without SERIAL_8250_CONSOLE
  MIPS: ath25: Avoid undefined early_serial_setup() without SERIAL_8250_CONSOLE
  MIPS: AR7: ensure the port type's FCR value is used

The new firmware interfaces for branch prediction behaviour changes
are transparently available for the guest. Nevertheless, there is
new state attached that should be migrated and properly resetted.
Provide a mechanism for handling reset, migration and VSIE.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
[Changed capability number to 152. - Radim]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Add PPC KVM ioctl to report vulnerability and workaround status to userspace.

Pull SCSI fix from James Bottomley:
 "One fix for SAS attached SATA CD-ROMs. It turns out that the libata
  handling of CD devices relies on the SCSI error handler, so disable
  async aborts (which don't start the error handler) for these devices"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: libsas: Disable asynchronous aborts for SATA devices

Merge tag 'for-4.15/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
 "All fixes marked for stable:

   - Fix DM thinp btree corruption seen when inserting a new key/value
     pair into a full root node.

   - Fix DM thinp btree removal deadlock due to artificially low number
     of allowed concurrent locks allowed.

   - Fix possible DM crypt corruption if kernel keyring service is used.
     Only affects ciphers using following IVs: essiv, lmk and tcw.

   - Two DM crypt device initialization error checking fixes.

   - Fix DM integrity to allow use of async ciphers that require DMA"

* tag 'for-4.15/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm crypt: fix error return code in crypt_ctr()
  dm crypt: wipe kernel key copy after IV initialization
  dm integrity: don't store cipher request on the stack
  dm crypt: fix crash by adding missing check for auth key size
  dm btree: fix serious bug in btree_split_beneath()
  dm thin metadata: THIN_MAX_CONCURRENT_LOCKS should be 6

Pull tracing fixes from Steven Rostedt:
 "Two more small fixes

   - The conversion of enums into their actual numbers to display in the
     event format file had an off-by-one bug, that could cause an enum
     not to be converted, and break user space parsing tools.

   - A fix to a previous fix to bring back the context recursion checks.
     The interrupt case checks for NMI, IRQ and softirq, but the softirq
     returned the same number regardless if it was set or not, although
     the logic would force it to be set if it were hit"

* tag 'trace-v4.15-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix converting enum's from the map in trace_event_eval_update()
  ring-buffer: Fix duplicate results in mapping context to bits in recursive lock

Pull input fixes from Dmitry Torokhov:

 - a fix for use-after-free in Synaptics RMI4 driver

 - correction to multitouch contact tracking on certain ALPS touchpads
   (which got broken when we tried to fix the 2-finger scrolling)

 - touchpad on Lenovo T640p is switched over to SMbus/RMI

 - a few device node refcount fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - prevent UAF reported by KASAN
  Input: ALPS - fix multi-touch decoding on SS4 plus touchpads
  Input: synaptics - Lenovo Thinkpad T460p devices should use RMI
  Input: of_touchscreen - add MODULE_LICENSE
  Input: 88pm860x-ts - fix child-node lookup
  Input: twl6040-vibra - fix child-node lookup
  Input: twl4030-vibra - fix sibling-node lookup

Pull i2c fixes from Wolfram Sang:
 "Two bugfixes for the I2C core: Lixing Wang fixed a refcounting problem
  with DT nodes. Jeremy Compostella fixed a buffer overflow possibility
  when using a 'don't use' ioctl interface directly"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA
  i2c: core: decrease reference count of device node in i2c_unregister_device

Pull libata fixlet from Tejun Heo:
 "This just adds one more entry for liteon optical drives to the device
  blacklist for large IOs.

  The change is very low risk"

* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: apply MAX_SEC_1024 to all LITEON EP1 series devices

Pull cgroup fix from Tejun Heo:
 "cgroup.threads should be delegatable (ie. a container should be able
  to write to it from inside) but was missing the flag.

  The change is very low risk"

* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: make cgroup.threads delegatable

Pull workqueue fixlet from Tejun Heo:
 "One patch to add touch_nmi_watchdog() while dumping workqueue debug
  messages to avoid triggering the lockup detector spuriously.

  The change is very low risk"

* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: avoid hard lockups in show_workqueue_state()