drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:368:13: error: 'dpu_plane_danger_signal_ctrl' defined but not used [-Werror=unused-function]

Fixes: 7b2e7ade ("drm/msm/dpu: Make dpu_plane_danger_signal_ctrl void")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Add a few __printf attribute specifiers to routines that
could use them.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The bindings for Qualcomm opp levels changed after being Acked but
before landing.  Thus the code in the GPU driver that was relying on
the old bindings is now broken.

Let's change the code to match the new bindings by adjusting the old
string 'qcom,level' to the new string 'opp-level'.  See the patch
("dt-bindings: opp: Introduce opp-level bindings").

NOTE: we will do additional cleanup to totally remove the string from
the code and use the new dev_pm_opp_get_level() but we'll do it in a
future patch.  This will facilitate getting the important code fix in
sooner without having to deal with cross-maintainer dependencies.

This patch needs to land before the patch ("arm64: dts: sdm845: Add
gpu and gmu device nodes") since if a tree contains the device tree
patch but not this one you'll get a crash at bootup.

Fixes: 4b565ca5 ("drm/msm: Add A6XX device support")
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

Each GPU core only uses one interrupt so we don't to look up
an interrupt by name and thereby we don't need interrupt-names.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Every GPU core only has one interrupt so there isn't any
value in looking up the interrupt by name. Remove the name (which
is legacy anyway) and use platform_get_irq() instead.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

When debugfs is disabled, but coredump is turned on, the adreno driver fails to build:

drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:4: error: 'struct msm_gpu_funcs' has no member named 'show'
   .show = adreno_show,
    ^~~~
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base')
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: error: initialization of 'void (*)(struct msm_gpu *, struct msm_gem_submit *, struct msm_file_private *)' from incompatible pointer type 'void (*)(struct msm_gpu *, struct msm_gpu_state *, struct drm_printer *)' [-Werror=incompatible-pointer-types]
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base.submit')
drivers/gpu/drm/msm/adreno/a4xx_gpu.c:546:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:1460:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a6xx_gpu.c:769:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/msm_gpu.c: In function 'msm_gpu_devcoredump_read':
drivers/gpu/drm/msm/msm_gpu.c:289:12: error: 'const struct msm_gpu_funcs' has no member named 'show'

Adjust the #ifdef to make it build again.

Fixes: c0fec7f5 ("drm/msm/gpu: Capture the GPU state on a GPU hang")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Prevents deadlock when fifo is full and reader closes file.
Signed-off-by: NKristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

In case of msm drm bind failure, pm runtime put sync
is called from dsi driver which issues an asynchronous
put on mdss device. Subsequently when dpu_mdss_destroy
is triggered the change will make sure to put the mdss
device in suspend and clearing pending work if not
scheduled.
Signed-off-by: NJayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Do some cleanup in the static inline functions defined in
dpu_media_info.h by cleaning up gotos and unneeded local
variables.

v3: Added spaces between operators per Seal Paul and Sam Ravnborg
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Remove more static inline functions that are lightly used and/or
very simple and easy to build into the calling functions.

v3: Fix a nit from Sean Paul
v2: Removed another unused function from dpu_hw_lm.c and add back
dpu_crtc_get_client_type() since there was a question regarding
its usefulness.
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Do some debugfs cleanups from across the DPU driver. The DRM
destroy functions will do a recursive delete on the entire
debugfs node so there is no need to store dentry pointers for
the debugfs files that are persistent for the life of the
driver. This also means that the destroy functions can go
away too.

Also, use standard API functions where applicable instead of
using hand written code.

v3: No changes
v2: Add more code; most of the dpu debugfs files should be
addressed now.
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

dpu_irq.c does some unneeded checks and passes control
to dpu_core_irq.c  The simple functions can be defined
in the same file where we use them and the files and
their associated hangers on can be deleted.

Additionally the postinstall hook isn't used even
in dpu_core_irq.c so zap that entire path.

v3: No changes
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Allow the KMS operation 'irq_postinstall' to be optional
so that the target display drivers don't need to define
a dummy function if they don't need one.

v3: No changes
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Outside of superfluous parameter checks the dpu_hw_blk_init()
doesn't have any failure paths. Switch it over to be a void
function and we can remove error handling paths in all the functions
that call it. While we're in those functions remove unneeded
initialization for a static variable.

v3: No changes
v2: Removed a cleanup intended for a different patch
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Remove some unused container_of() helper functions.

v3: No changes
v2: Retained still used helper functions in the name of readability
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The static inline function dpu_crtc_enabled() is only called once
and the function that calls it in turn is only called once and
the return value can be easily checked in the calling functions
so collapse everything down.

v3: No changes
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

dpu_crtc_get_mixer_height() is only used once and the value it
returns can be easily derived from the calling function.

v3: No changes
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The functions in dpu_dbg.c aren't used. The two main dump functions
fail after a lookup from dpu_dbg_base.reg_base_list which turns out
to never be populated and once those are removed the rest of the
file doesn't make any sense.

v3: No changes
v2: Moved some unrelated changes to another patch
Reviewed-by: NSean Paul <sean@poorly.run>
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Each time it's called we're holding the crtc modeset lock, so it's
redundant.

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

It's just for debugfs output, we don't need it

Changes in v2:
- None

Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Instead of assigning/clearing the crtc on vblank enable/disable, we can
just assign and clear the crtc on modeset. That allows us to just toggle
the encoder's vblank interrupts on vblank_enable.

So why is this important? Previously the driver was using the legacy
pointers to assign/clear the crtc. Legacy pointers are cleared _after_
disabling the hardware, so the legacy pointer was valid during
vblank_disable, but that's not something we should rely on.

Instead of relying on the core ordering the legacy pointer assignments
just so, we'll assign the crtc in dpu_crtc enable/disable. This is the
only place that mapping can change, so we're covered there.

We're also taking advantage of drm_crtc_vblank_on/off. By using this, we
ensure that vblank_enable/disable can never be called while the crtc is
off (which means the assigned crtc will always be valid). As such, we
don't need to use modeset locks or the crtc_lock in the
vblank_enable/disable routine to be sure state is consistent.

...I think.

Changes in v2:
- Changed crtc check in toggle_vblank to != (Jeykumar)

Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
[dpu_crtc.c change needed to be manually applied b/c of the dpu_crtc_reset change]
Signed-off-by: NRob Clark <robdclark@gmail.com>

The drm_crtc_vblank_on/off calls in enable/disable guarantee that we
won't call this function when crtc is not enabled.

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Matches dpu_crtc_enable and we'll need the old state in a future patch

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The indirection of registering a callback and opaque pointer isn't reall
useful when there's only one callsite. So instead of having the
vblank_cb registration, just give encoder a crtc and let it directly
call the vblank handler.

In a later patch, we'll make use of this further.

Changes in v2:
- None

Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

I think the intention here was to protect the enc->crtc access, but
that's insufficient to avoid enc->crtc changing. Fortunately we're
already holding the modeset lock when this is called (from
atomic_check), so remove the crtc_lock and add a modeset lock check.

While we're at it, use the encoder mask from crtc state instead of
legacy pointer.

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

There are 4 times that _dpu_crtc_vblank_enable_no_lock() is called:

1- crtc enable
2- crtc disable
3- crtc vblank enable
4- crtc vblank disable

When we enable or disable the crtc, we call drm_crtc_vblank_on and
drm_crtc_vblank_off respectively. That will gate vblank enables and
disables to only being called when the crtc is active. That means that
we can just enable/disable pm runtime in crtc enable/disable. This will
be beneficial in trying to eliminate blocking calls from the vblank call
chain.

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Add modeset lock checks to functions that could be called outside the
core atomic stack.

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

It's for legacy drivers, for atomic drivers crtc->state->encoder_mask
should be used to map encoder to crtc.

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
[seanpaul resolved conflict with async param of dpu_encoder_kickoff]
Signed-off-by: NRob Clark <robdclark@gmail.com>

This patch wraps dpu_core_perf_crtc_release_bw() with modeset locks
since it digs into the state objects.

Changes in v2:
- None
Changes in v3:
- Use those nifty new DRM_MODESET_LOCK_ALL_* helpers (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Now that runtime resume is handled in encoder, we don't need to worry
about crtc_lock recursion when calling pm_runtime_(get|put). So drop the
lock drops in _dpu_crtc_vblank_enable_no_lock().

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

The crtc runtime resume doesn't actually operate on the crtc, but rather
its encoders. The problem with this is that we need to inspect the crtc
state to get the currently connected encoders. Since runtime resume
isn't guaranteed to be called while holding the modeset locks (although
it sometimes is), this presents a race condition.

Now that we have ->enabled on the virtual encoders, and a lock to
protect it, just call resume on each encoder and only restore the ones
that are enabled.

Changes in v2:
- None

Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Add a bool to dpu_encoder_virt to track whether the encoder is enabled
or not. Repurpose the enc_lock mutex to ensure that it is consistent
with the hw state.

Changes in v2:
- None

Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

enc_spinlock instead of enc_spin_lock.

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Now that we don't have any event handlers, remove dpu_power_handle!

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

It's only used in core_perf, so stick it there (and change the name to
reflect that).

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

It's needed for struct dss_module_power, and is currently being pulled
in by dpu_power_handle.h

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

It's unused

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Instead of registering through dpu_power_handle just to get a call on
runtime_resume, call the crtc function directly.

Changes in v2:
- None
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

power_events are only used for pm_runtime, and that's all handled in
dpu_kms. So just call vbif_init_memtypes at the correct times.

Changes in v2:
- Removed obsolete comment (Jeykumar)

Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: NJeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>