- 17 9月, 2016 3 次提交
-
-
由 Tariq Toukan 提交于
Manage the allocation and deallocation of mapped RX pages only through dedicated API functions. Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tariq Toukan 提交于
To improve the memory consumption scheme, we omit the flow that demands and splits high-order pages in Striding RQ, and stay with a single Striding RQ flow that uses order-0 pages. Moving to fragmented memory allows the use of larger MPWQEs, which reduces the number of UMR posts and filler CQEs. Moving to a single flow allows several optimizations that improve performance, especially in production servers where we would anyway fallback to order-0 allocations: - inline functions that were called via function pointers. - improve the UMR post process. This patch alone is expected to give a slight performance reduction. However, the new memory scheme gives the possibility to use a page-cache of a fair size, that doesn't inflate the memory footprint, which will dramatically fix the reduction and even give a performance gain. Performance tests: The following results were measured on a freshly booted system, giving optimal baseline performance, as high-order pages are yet to be fragmented and depleted. We ran pktgen single-stream benchmarks, with iptables-raw-drop: Single stride, 64 bytes: * 4,739,057 - baseline * 4,749,550 - this patch no reduction Larger packets, no page cross, 1024 bytes: * 3,982,361 - baseline * 3,845,682 - this patch 3.5% reduction Larger packets, every 3rd packet crosses a page, 1500 bytes: * 3,731,189 - baseline * 3,579,414 - this patch 4% reduction Fixes: 461017cb ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Fixes: bc77b240 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE") Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Howells 提交于
Add CONFIG_AF_RXRPC_IPV6 and make the IPv6 support code conditional on it. This is then made conditional on CONFIG_IPV6. Without this, the following can be seen: net/built-in.o: In function `rxrpc_init_peer': >> peer_object.c:(.text+0x18c3c8): undefined reference to `ip6_route_output_flags' Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2016 37 次提交
-
-
由 David S. Miller 提交于
John Crispin says: ==================== net-next: dsa: add QCA8K support This series is based on the AR8xxx series posted by Matthieu Olivari in may 2015. The following changes were made since then * fixed the nitpicks from the previous review * updated to latest API * turned it into an mdio device * added callbacks for fdb, bridge offloading, stp, eee, port status * fixed several minor issues to the port setup and arp learning * changed the namespacing as this driver to qca8k The driver has so far only been tested on qca8337/N. It should work on other QCA switches such as the qca8327 with minor changes. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Crispin 提交于
This patch contains initial support for the QCA8337 switch. It will detect a QCA8337 switch, if present and declared in the DT. Each port will be represented through a standalone net_device interface, as for other DSA switches. CPU can communicate with any of the ports by setting an IP@ on ethN interface. Most of the extra callbacks of the DSA subsystem are already supported, such as bridge offloading, stp, fdb. Signed-off-by: NJohn Crispin <john@phrozen.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Crispin 提交于
Add support for the 2-bytes Qualcomm tag that gigabit switches such as the QCA8337/N might insert when receiving packets, or that we need to insert while targeting specific switch ports. The tag is inserted directly behind the ethernet header. Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NJohn Crispin <john@phrozen.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Crispin 提交于
Add device-tree binding for ar8xxx switch families. Cc: devicetree@vger.kernel.org Signed-off-by: NJohn Crispin <john@phrozen.org> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Remove .owner field if calls are used which set it automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Remove including <linux/version.h> that don't need it. Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: drivers/net/dsa/bcm_sf2.c:963:19: warning: symbol 'bcm_sf2_io_ops' was not declared. Should it be static? Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When skb replaces another one in ooo queue, I forgot to also update tp->ooo_last_skb as well, if the replaced skb was the last one in the queue. To fix this, we simply can re-use the code that runs after an insertion, trying to merge skbs at the right of current skb. This not only fixes the bug, but also remove all small skbs that might be a subset of the new one. Example: We receive segments 2001:3001, 4001:5001 Then we receive 2001:8001 : We should replace 2001:3001 with the big skb, but also remove 4001:50001 from the queue to save space. packetdrill test demonstrating the bug 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> +0.100 < . 1:1(0) ack 1 win 1024 +0 accept(3, ..., ...) = 4 +0.01 < . 1001:2001(1000) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001> +0.01 < . 1001:3001(2000) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001 1001:3001> Fixes: 9f5afeae ("tcp: use an RB tree for ooo receive queue") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NYuchung Cheng <ycheng@google.com> Cc: Yaogong Wang <wygivan@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sean Wang says: ==================== mediatek: add enhancement into the existing reset flow Current driver only resets DMA used by descriptor rings which can't guarantee it can recover all various kinds of fatal errors, so the patch 1) tries to reset the underlying hardware resource from scratch on Mediatek SoC required for ethernet running. 2) refactors code in order to the reusability of existing code. 3) considers handling for race condition between the reset flow and callbacks registered into core driver called about hardware accessing. 4) introduces power domain usage to hardware setup which leads to have cleanly and completely restore to the state as the initial. Changes since v1: - fix the build error with module built causing undefined symbol for pinctrl_bind_pins, so using pinctrl_select_state instead accomplishes the pin mux setup during the reset process. ==================== Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
add the protection of the race condition between the reset process and hardware access happening on the related callbacks. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
struct mtk_eth has already contained struct regmap ethsys pointer to the address range of the internal circuit reset, so we reuse it to reset more internal blocks on ethernet hardware such as packet processing engine (PPE) and frame engine (FE) instead of rstc which deals with FE only. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
1) original driver only resets DMA used by descriptor rings which can't guarantee it can recover all various kinds of fatal errors, so the patch tries to reset the underlying hardware resource from scratch on Mediatek SoC required for ethernet running, including power, pin mux control, clock and internal circuits on the ethernet in order to restore into the initial state which the rebooted machine gives. 2) add state variable inside structure mtk_eth to help distinguish mtk_hw_init is called between the initialization during boot time or re-initialization during the reset process. 3) add ge_mode variable inside structure mtk_mac for restoring the interface mode of the current setup for the target MAC. 4) remove __init attribute from mtk_hw_init definition Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
introduce power domain control which the digital circuit of the ethernet belongs to inside the flow of hardware initialization and deinitialization which helps the entire ethernet hardware block could restart cleanly and completely as being back to the initial state when the whole machine reboot. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
This cleans up the error path inside mtk_hw_init call, causing it able to exit appropriately when something fails and also includes refactoring mtk_cleanup call to make the partial logic reusable on the error path. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
grouping things related to the deinitialization of what mtk_hw_init call does that help to be reused by the reset process and the error path handling. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
the existing mtk_hw_init includes hardware and software initialization inside so that it is slightly hard to reuse them for the process of the reset recovery, so some splitting is made here for keeping hardware initializing relevant thing and the else such as IRQ registration and MDIO initialization what are all about to the interface of core driver moved to the other proper place because they have no needs to register IRQ and re-initialize structure again during the reset process. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'rxrpc-rewrite-20160913-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Support IPv6 Here is a set of patches that add IPv6 support. They need to be applied on top of the just-posted miscellaneous fix patches. They are: (1) Make autobinding of an unconnected socket work when sendmsg() is called to initiate a client call. (2) Don't specify the protocol when creating the client socket, but rather take the default instead. (3) Use rxrpc_extract_addr_from_skb() in a couple of places that were doing the same thing manually. This allows the IPv6 address extraction to be done in fewer places. (4) Add IPv6 support. With this, calls can be made to IPv6 servers from userspace AF_RXRPC programs; AFS, however, can't use IPv6 yet as the RPC calls need to be upgradeable. ==================== Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'rxrpc-rewrite-20160913-1' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Miscellaneous fixes Here's a set of miscellaneous fix patches. There are a couple of points of note: (1) There is one non-fix patch that adjusts the call ref tracking tracepoint to make kernel API-held refs on calls more obvious. This is a prerequisite for the patch that fixes prealloc refcounting. (2) The final patch alters how jumbo packets that partially exceed the receive window are handled. Previously, space was being left in the Rx buffer for them, but this significantly hurts performance as the Rx window can't be increased to match the OpenAFS Tx window size. Instead, the excess subpackets are discarded and an EXCEEDS_WINDOW ACK is generated for the first. To avoid the problem of someone trying to run the kernel out of space by feeding the kernel a series of overlapping maximal jumbo packets, we stop allowing jumbo packets on a call if we encounter more than three jumbo packets with duplicate or excessive subpackets. ==================== Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Varun Prakash says: ==================== iw_cxgb4,cxgbit: remove duplicate code This patch series removes duplicate code from iw_cxgb4 and cxgbit by adding common function definitions in libcxgb. Please review. ==================== Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_mk_rx_data_ack() to remove duplicate code to form CPL_RX_DATA_ACK hardware command. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_mk_abort_rpl() to remove duplicate code to form CPL_ABORT_RPL hardware command. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_mk_abort_req() to remove duplicate code to form CPL_ABORT_REQ hardware command. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_mk_close_con_req() to remove duplicate code to form CPL_CLOSE_CON_REQ hardware command. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_mk_tid_release() to remove duplicate code to form CPL_TID_RELEASE hardware command. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_compute_wscale() in libcxgb_cm.h to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_best_mtu() in libcxgb_cm.h to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_is_neg_adv() in libcxgb_cm.h to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_find_route6() in libcxgb_cm.c to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_find_route() in libcxgb_cm.c to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_get_4tuple() in libcxgb_cm.c to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lance Richardson 提交于
The ovs kernel data path currently defers the execution of all recirc actions until stack utilization is at a minimum. This is too limiting for some packet forwarding scenarios due to the small size of the deferred action FIFO (10 entries). For example, broadcast traffic sent out more than 10 ports with recirculation results in packet drops when the deferred action FIFO becomes full, as reported here: http://openvswitch.org/pipermail/dev/2016-March/067672.html Since the current recursion depth is available (it is already tracked by the exec_actions_level pcpu variable), we can use it to determine whether to execute recirculation actions immediately (safe when recursion depth is low) or defer execution until more stack space is available. With this change, the deferred action fifo size becomes a non-issue for currently failing scenarios because it is no longer used when there are three or fewer recursions through ovs_execute_actions(). Suggested-by: NPravin Shelar <pshelar@ovn.org> Signed-off-by: NLance Richardson <lrichard@redhat.com> Acked-by: NPravin B Shelar <pshelar@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Or Gerlitz says: ==================== net/sched: cls_flower: Add ports masks This series adds the ability to specify tcp/udp ports masks for TC/flower filter matches. I also removed an unused fields from the flower keys struct and clarified the format of the recently added vlan attibutes. v1--> v2 changes: * fixes typo in patch #2 title and change log (Sergei) * added acks provided by Jiri on v1 FWIW, by mistake the cover letter of V1 (but not the patches) carried V2 tag, hope this doesn't create too much confusion. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Specify the format (size and endianess) for the vlan attributes. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Commit c3f83241 "net: Add full IPv6 addresses to flow_keys" added an unused instance of struct flow_dissector_key_addrs into struct fl_flow_key, remove it. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reported-by: NHadar Hen Zion <hadarh@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Add the definitions for src/dst udp/tcp port masks and use them when setting && dumping the relevant keys. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NPaul Blakey <paulb@mellanox.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Regnery 提交于
In commit 9ee7b683 we moved the enablement of msi interrupts earlier in alx_init_intr. If there is an error in alx_alloc_rings, __alx_open returns with an error but msi (or msi-x) interrupts stays enabled. Add a new error label to disable msi (or msi-x) interrupts. Fixes: 9ee7b683 ("alx: refactor msi enablement and disablement") Signed-off-by: NTobias Regnery <tobias.regnery@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-