- 27 1月, 2018 9 次提交
-
-
由 Daniel Borkmann 提交于
Since we've changed div/mod exception handling for src_reg in eBPF verifier itself, remove the leftovers from s390x JIT. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Since we've changed div/mod exception handling for src_reg in eBPF verifier itself, remove the leftovers from arm64 JIT. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Since we've changed div/mod exception handling for src_reg in eBPF verifier itself, remove the leftovers from x86_64 JIT. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
One of the ugly leftovers from the early eBPF days is that div/mod operations based on registers have a hard-coded src_reg == 0 test in the interpreter as well as in JIT code generators that would return from the BPF program with exit code 0. This was basically adopted from cBPF interpreter for historical reasons. There are multiple reasons why this is very suboptimal and prone to bugs. To name one: the return code mapping for such abnormal program exit of 0 does not always match with a suitable program type's exit code mapping. For example, '0' in tc means action 'ok' where the packet gets passed further up the stack, which is just undesirable for such cases (e.g. when implementing policy) and also does not match with other program types. While trying to work out an exception handling scheme, I also noticed that programs crafted like the following will currently pass the verifier: 0: (bf) r6 = r1 1: (85) call pc+8 caller: R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 callee: frame1: R1=ctx(id=0,off=0,imm=0) R10=fp0,call_1 10: (b4) (u32) r2 = (u32) 0 11: (b4) (u32) r3 = (u32) 1 12: (3c) (u32) r3 /= (u32) r2 13: (61) r0 = *(u32 *)(r1 +76) 14: (95) exit returning from callee: frame1: R0_w=pkt(id=0,off=0,r=0,imm=0) R1=ctx(id=0,off=0,imm=0) R2_w=inv0 R3_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0,call_1 to caller at 2: R0_w=pkt(id=0,off=0,r=0,imm=0) R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 from 14 to 2: R0=pkt(id=0,off=0,r=0,imm=0) R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 2: (bf) r1 = r6 3: (61) r1 = *(u32 *)(r1 +80) 4: (bf) r2 = r0 5: (07) r2 += 8 6: (2d) if r2 > r1 goto pc+1 R0=pkt(id=0,off=0,r=8,imm=0) R1=pkt_end(id=0,off=0,imm=0) R2=pkt(id=0,off=8,r=8,imm=0) R6=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 7: (71) r0 = *(u8 *)(r0 +0) 8: (b7) r0 = 1 9: (95) exit from 6 to 8: safe processed 16 insns (limit 131072), stack depth 0+0 Basically what happens is that in the subprog we make use of a div/mod by 0 exception and in the 'normal' subprog's exit path we just return skb->data back to the main prog. This has the implication that the verifier thinks we always get a pkt pointer in R0 while we still have the implicit 'return 0' from the div as an alternative unconditional return path earlier. Thus, R0 then contains 0, meaning back in the parent prog we get the address range of [0x0, skb->data_end] as read and writeable. Similar can be crafted with other pointer register types. Since i) BPF_ABS/IND is not allowed in programs that contain BPF to BPF calls (and generally it's also disadvised to use in native eBPF context), ii) unknown opcodes don't return zero anymore, iii) we don't return an exception code in dead branches, the only last missing case affected and to fix is the div/mod handling. What we would really need is some infrastructure to propagate exceptions all the way to the original prog unwinding the current stack and returning that code to the caller of the BPF program. In user space such exception handling for similar runtimes is typically implemented with setjmp(3) and longjmp(3) as one possibility which is not available in the kernel, though (kgdb used to implement it in kernel long time ago). I implemented a PoC exception handling mechanism into the BPF interpreter with porting setjmp()/longjmp() into x86_64 and adding a new internal BPF_ABRT opcode that can use a program specific exception code for all exception cases we have (e.g. div/mod by 0, unknown opcodes, etc). While this seems to work in the constrained BPF environment (meaning, here, we don't need to deal with state e.g. from memory allocations that we would need to undo before going into exception state), it still has various drawbacks: i) we would need to implement the setjmp()/longjmp() for every arch supported in the kernel and for x86_64, arm64, sparc64 JITs currently supporting calls, ii) it has unconditional additional cost on main program entry to store CPU register state in initial setjmp() call, and we would need some way to pass the jmp_buf down into ___bpf_prog_run() for main prog and all subprogs, but also storing on stack is not really nice (other option would be per-cpu storage for this, but it also has the drawback that we need to disable preemption for every BPF program types). All in all this approach would add a lot of complexity. Another poor-man's solution would be to have some sort of additional shared register or scratch buffer to hold state for exceptions, and test that after every call return to chain returns and pass R0 all the way down to BPF prog caller. This is also problematic in various ways: i) an additional register doesn't map well into JITs, and some other scratch space could only be on per-cpu storage, which, again has the side-effect that this only works when we disable preemption, or somewhere in the input context which is not available everywhere either, and ii) this adds significant runtime overhead by putting conditionals after each and every call, as well as implementation complexity. Yet another option is to teach verifier that div/mod can return an integer, which however is also complex to implement as verifier would need to walk such fake 'mov r0,<code>; exit;' sequeuence and there would still be no guarantee for having propagation of this further down to the BPF caller as proper exception code. For parent prog, it is also is not distinguishable from a normal return of a constant scalar value. The approach taken here is a completely different one with little complexity and no additional overhead involved in that we make use of the fact that a div/mod by 0 is undefined behavior. Instead of bailing out, we adapt the same behavior as on some major archs like ARMv8 [0] into eBPF as well: X div 0 results in 0, and X mod 0 results in X. aarch64 and aarch32 ISA do not generate any traps or otherwise aborts of program execution for unsigned divides. I verified this also with a test program compiled by gcc and clang, and the behavior matches with the spec. Going forward we adapt the eBPF verifier to emit such rewrites once div/mod by register was seen. cBPF is not touched and will keep existing 'return 0' semantics. Given the options, it seems the most suitable from all of them, also since major archs have similar schemes in place. Given this is all in the realm of undefined behavior, we still have the option to adapt if deemed necessary and this way we would also have the option of more flexibility from LLVM code generation side (which is then fully visible to verifier). Thus, this patch i) fixes the panic seen in above program and ii) doesn't bypass the verifier observations. [0] ARM Architecture Reference Manual, ARMv8 [ARM DDI 0487B.b] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0487b.b/DDI0487B_b_armv8_arm.pdf 1) aarch64 instruction set: section C3.4.7 and C6.2.279 (UDIV) "A division by zero results in a zero being written to the destination register, without any indication that the division by zero occurred." 2) aarch32 instruction set: section F1.4.8 and F5.1.263 (UDIV) "For the SDIV and UDIV instructions, division by zero always returns a zero result." Fixes: f4d7e40a ("bpf: introduce function calls (verification)") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Recent findings by syzcaller fixed in 7891a87e ("bpf: arsh is not supported in 32 bit alu thus reject it") triggered a warning in the interpreter due to unknown opcode not being rejected by the verifier. The 'return 0' for an unknown opcode is really not optimal, since with BPF to BPF calls, this would go untracked by the verifier. Do two things here to improve the situation: i) perform basic insn sanity check early on in the verification phase and reject every non-uapi insn right there. The bpf_opcode_in_insntable() table reuses the same mapping as the jumptable in ___bpf_prog_run() sans the non-public mappings. And ii) in ___bpf_prog_run() we do need to BUG in the case where the verifier would ever create an unknown opcode due to some rewrites. Note that JITs do not have such issues since they would punt to interpreter in these situations. Moreover, the BPF_JIT_ALWAYS_ON would also help to avoid such unknown opcodes in the first place. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Given we recently had c131187d ("bpf: fix branch pruning logic") and 95a762e2 ("bpf: fix incorrect sign extension in check_alu_op()") in particular where before verifier skipped verification of the wrongly assumed dead branch, we should not just replace the dead code parts with nops (mov r0,r0). If there is a bug such as fixed in 95a762e2 in future again, where runtime could execute those insns, then one of the potential issues with the current setting would be that given the nops would be at the end of the program, we could execute out of bounds at some point. The best in such case would be to just exit the BPF program altogether and return an exception code. However, given this would require two instructions, and such a dead code gap could just be a single insn long, we would need to place 'r0 = X; ret' snippet at the very end after the user program or at the start before the program (where we'd skip that region on prog entry), and then place unconditional ja's into the dead code gap. While more complex but possible, there's still another block in the road that currently prevents from this, namely BPF to BPF calls. The issue here is that such exception could be returned from a callee, but the caller would not know that it's an exception that needs to be propagated further down. Alternative that has little complexity is to just use a ja-1 code for now which will trap the execution here instead of silently doing bad things if we ever get there due to bugs. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Daniel Borkmann 提交于
Very minor optimization; saves 1 byte per program in x86_64 JIT in cBPF prologue. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Mickaël Salaün 提交于
Do not build lib/bpf/bpf.o with this Makefile but use the one from the library directory. This avoid making a buggy bpf.o file (e.g. missing symbols). This patch is useful if some code (e.g. Landlock tests) needs both the bpf.o (from tools/lib/bpf) and the bpf_load.o (from samples/bpf). Signed-off-by: NMickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Lawrence Brakmo 提交于
Removed commented lines from test_tcpbpf_kern.c Fixes: d6d4f60c bpf: add selftest for tcpbpf Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 26 1月, 2018 14 次提交
-
-
由 Mickaël Salaün 提交于
Make the code more readable. Signed-off-by: NMickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Alexei Starovoitov 提交于
Lawrence Brakmo says: ==================== This patchset adds support for: - direct R or R/W access to many tcp_sock fields - passing up to 4 arguments to sock_ops BPF functions - tcp_sock field bpf_sock_ops_cb_flags for controlling callbacks - optionally calling sock_ops BPF program when RTO fires - optionally calling sock_ops BPF program when packet is retransmitted - optionally calling sock_ops BPF program when TCP state changes - access to tclass and sk_txhash - new selftest v2: Fixed commit message 0/11. The commit is to "bpf-next" but the patch below used "bpf" and Patchwork didn't work correctly. v3: Cleaned RTO callback as per Yuchung's comment Added BPF enum for TCP states as per Alexei's comment v4: Fixed compile warnings related to detecting changes between TCP internal states and the BPF defined states. v5: Fixed comment issues in some selftest files Fixed accesss issue with u64 fields in bpf_sock_ops struct v6: Made fixes based on comments form Eric Dumazet: The field bpf_sock_ops_cb_flags was addded in a hole on 64bit kernels Field bpf_sock_ops_cb_flags is now set through a helper function which returns an error when a BPF program tries to set bits for callbacks that are not supported in the current kernel. Added a comment indicating that when adding fields to bpf_sock_ops_kern they should be added before the field named "temp" if they need to be cleared before calling the BPF function. v7: Enfornced fields "op" and "replylong[1] .. replylong[3]" not be writable based on comments form Eric Dumazet and Alexei Starovoitov. Filled 32 bit hole in bpf_sock_ops struct with sk_txhash based on comments from Daniel Borkmann. Removed unused functions (tcp_call_bpf_1arg, tcp_call_bpf_4arg) based on comments from Daniel Borkmann. v8: Add commit message 00/12 Add Acked-by as appropriate v9: Moved the bug fix to the front of the patchset Changed RETRANS_CB so it is always called (before it was only called if the retransmit succeeded). It is now called with an extra argument, the return value of tcp_transmit_skb (0 => success). Based on comments from Yuchung Cheng. Added support for reading 2 new fields, sacked_out and lost_out, based on comments from Yuchung Cheng. v10: Moved the callback flags from include/uapi/linux/tcp.h to include/uapi/linux/bpf.h Cleaned up the test in selftest. Added a timeout so it always completes, even if the client is not communicating with the server. Made it faster by removing the sleeps. Made sure it works even when called back-to-back 20 times. Consists of the following patches: [PATCH bpf-next v10 01/12] bpf: Only reply field should be writeable [PATCH bpf-next v10 02/12] bpf: Make SOCK_OPS_GET_TCP size [PATCH bpf-next v10 03/12] bpf: Make SOCK_OPS_GET_TCP struct [PATCH bpf-next v10 04/12] bpf: Add write access to tcp_sock and sock [PATCH bpf-next v10 05/12] bpf: Support passing args to sock_ops bpf [PATCH bpf-next v10 06/12] bpf: Adds field bpf_sock_ops_cb_flags to [PATCH bpf-next v10 07/12] bpf: Add sock_ops RTO callback [PATCH bpf-next v10 08/12] bpf: Add support for reading sk_state and [PATCH bpf-next v10 09/12] bpf: Add sock_ops R/W access to tclass [PATCH bpf-next v10 10/12] bpf: Add BPF_SOCK_OPS_RETRANS_CB [PATCH bpf-next v10 11/12] bpf: Add BPF_SOCK_OPS_STATE_CB [PATCH bpf-next v10 12/12] bpf: add selftest for tcpbpf ==================== Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lawrence Brakmo 提交于
Added a selftest for tcpbpf (sock_ops) that checks that the appropriate callbacks occured and that it can access tcp_sock fields and that their values are correct. Run with command: ./test_tcpbpf_user Adding the flag "-d" will show why it did not pass. Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lawrence Brakmo 提交于
Adds support for calling sock_ops BPF program when there is a TCP state change. Two arguments are used; one for the old state and another for the new state. There is a new enum in include/uapi/linux/bpf.h that exports the TCP states that prepends BPF_ to the current TCP state names. If it is ever necessary to change the internal TCP state values (other than adding more to the end), then it will become necessary to convert from the internal TCP state value to the BPF value before calling the BPF sock_ops function. There are a set of compile checks added in tcp.c to detect if the internal and BPF values differ so we can make the necessary fixes. New op: BPF_SOCK_OPS_STATE_CB. Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lawrence Brakmo 提交于
Adds support for calling sock_ops BPF program when there is a retransmission. Three arguments are used; one for the sequence number, another for the number of segments retransmitted, and the last one for the return value of tcp_transmit_skb (0 => success). Does not include syn-ack retransmissions. New op: BPF_SOCK_OPS_RETRANS_CB. Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lawrence Brakmo 提交于
Adds direct write access to sk_txhash and access to tclass for ipv6 flows through getsockopt and setsockopt. Sample usage for tclass: bpf_getsockopt(skops, SOL_IPV6, IPV6_TCLASS, &v, sizeof(v)) where skops is a pointer to the ctx (struct bpf_sock_ops). Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lawrence Brakmo 提交于
Add support for reading many more tcp_sock fields state, same as sk->sk_state rtt_min same as sk->rtt_min.s[0].v (current rtt_min) snd_ssthresh rcv_nxt snd_nxt snd_una mss_cache ecn_flags rate_delivered rate_interval_us packets_out retrans_out total_retrans segs_in data_segs_in segs_out data_segs_out lost_out sacked_out sk_txhash bytes_received (__u64) bytes_acked (__u64) Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lawrence Brakmo 提交于
Adds an optional call to sock_ops BPF program based on whether the BPF_SOCK_OPS_RTO_CB_FLAG is set in bpf_sock_ops_flags. The BPF program is passed 2 arguments: icsk_retransmits and whether the RTO has expired. Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lawrence Brakmo 提交于
Adds field bpf_sock_ops_cb_flags to tcp_sock and bpf_sock_ops. Its primary use is to determine if there should be calls to sock_ops bpf program at various points in the TCP code. The field is initialized to zero, disabling the calls. A sock_ops BPF program can set it, per connection and as necessary, when the connection is established. It also adds support for reading and writting the field within a sock_ops BPF program. Reading is done by accessing the field directly. However, writing is done through the helper function bpf_sock_ops_cb_flags_set, in order to return an error if a BPF program is trying to set a callback that is not supported in the current kernel (i.e. running an older kernel). The helper function returns 0 if it was able to set all of the bits set in the argument, a positive number containing the bits that could not be set, or -EINVAL if the socket is not a full TCP socket. Examples of where one could call the bpf program: 1) When RTO fires 2) When a packet is retransmitted 3) When the connection terminates 4) When a packet is sent 5) When a packet is received Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lawrence Brakmo 提交于
Adds support for passing up to 4 arguments to sock_ops bpf functions. It reusues the reply union, so the bpf_sock_ops structures are not increased in size. Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lawrence Brakmo 提交于
This patch adds a macro, SOCK_OPS_SET_FIELD, for writing to struct tcp_sock or struct sock fields. This required adding a new field "temp" to struct bpf_sock_ops_kern for temporary storage that is used by sock_ops_convert_ctx_access. It is used to store and recover the contents of a register, so the register can be used to store the address of the sk. Since we cannot overwrite the dst_reg because it contains the pointer to ctx, nor the src_reg since it contains the value we want to store, we need an extra register to contain the address of the sk. Also adds the macro SOCK_OPS_GET_OR_SET_FIELD that calls one of the GET or SET macros depending on the value of the TYPE field. Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lawrence Brakmo 提交于
Changed SOCK_OPS_GET_TCP to SOCK_OPS_GET_FIELD and added 2 arguments so now it can also work with struct sock fields. The first argument is the name of the field in the bpf_sock_ops struct, the 2nd argument is the name of the field in the OBJ struct. Previous: SOCK_OPS_GET_TCP(FIELD_NAME) New: SOCK_OPS_GET_FIELD(BPF_FIELD, OBJ_FIELD, OBJ) Where OBJ is either "struct tcp_sock" or "struct sock" (without quotation). BPF_FIELD is the name of the field in the bpf_sock_ops struct and OBJ_FIELD is the name of the field in the OBJ struct. Although the field names are currently the same, the kernel struct names could change in the future and this change makes it easier to support that. Note that adding access to tcp_sock fields in sock_ops programs does not preclude the tcp_sock fields from being removed as long as we are willing to do one of the following: 1) Return a fixed value (e.x. 0 or 0xffffffff), or 2) Make the verifier fail if that field is accessed (i.e. program fails to load) so the user will know that field is no longer supported. Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lawrence Brakmo 提交于
Make SOCK_OPS_GET_TCP helper macro size independent (before only worked with 4-byte fields. Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
由 Lawrence Brakmo 提交于
Currently, a sock_ops BPF program can write the op field and all the reply fields (reply and replylong). This is a bug. The op field should not have been writeable and there is currently no way to use replylong field for indices >= 1. This patch enforces that only the reply field (which equals replylong[0]) is writeable. Fixes: 40304b2a ("bpf: BPF support for sock_ops") Signed-off-by: NLawrence Brakmo <brakmo@fb.com> Acked-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
-
- 24 1月, 2018 15 次提交
-
-
由 Wang YanQing 提交于
If we then OR this with 0x40, then the value of 6th bit (0th is first bit) become known, so the right mask is 0xbf instead of 0xcf. Signed-off-by: NWang YanQing <udknight@gmail.com> Acked-by: NEdward Cree <ecree@solarflare.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Daniel Borkmann 提交于
John Fastabend says: ==================== The sockmap sample is pretty simple at the moment. All it does is open a few sockets attach BPF programs/sockmaps and sends a few packets. However, for testing and debugging I wanted to have more control over the sendmsg format and data than provided by tools like iperf3/netperf, etc. The reason is for testing BPF programs and stream parser it is helpful to be able submit multiple sendmsg calls with different msg layouts. For example lots of 1B iovs or a single large MB of data, etc. Additionally, my current test setup requires an entire orchestration layer (cilium) to run. As well as lighttpd and http traffic generators or for kafka testing brokers and clients. This makes it a bit more difficult when doing performance optimizations to incrementally test small changes and come up with performance delta's and perf numbers. By adding a few more options and an additional few tests the sockmap sample program can show a more complete example and do some of the above. Because the sample program is self contained it doesn't require additional infrastructure to run either. This series, although still fairly crude, does provide some nice additions. They are - a new sendmsg tests with a sender and recv threads - a new base tests so we can get metrics/data without BPF - multiple GBps of throughput on base and sendmsg tests - automatically set rlimit and common variables That said the UI is still primitive, more features could be added, more tests might be useful, the reporting is bare bones, etc. But, IMO lets push this now rather than sit on it for weeks until I get time to do the above improvements. Additional patches can address the other limitations/issues. Another thing I am considering is moving this into selftests, after a few more fixes so we avoid false failures, so that we get more sockmap testing. v2: removed bogus file added by patch 3/7 v3: 1/7 replace goto out with returns, remove sighandler update, 2/7 free iov in error cases 3/7 fix bogus makefile change, bail out early on errors v4: add Martin's "nits" and ACKs along with fixes to 2/7 iov free also pointed out by Martin. Thanks Daniel and Martin for the reviews! ==================== Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 John Fastabend 提交于
Avoid extra step of setting limit from cmdline and do it directly in the program. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 John Fastabend 提交于
Put client sockets in blocking mode otherwise with sendmsg tests its easy to overrun the socket buffers which results in the test being aborted. The original non-blocking was added to handle listen/accept with a single thread the client/accepted sockets do not need to be non-blocking. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 John Fastabend 提交于
Add a base test that does not use BPF hooks to test baseline case. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 John Fastabend 提交于
Report bytes/sec sent as well as total bytes. Useful to get rough idea how different configurations and usage patterns perform with sockmap. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 John Fastabend 提交于
Currently for SENDMSG tests first send completes then recv runs. This does not work well for large data sizes and/or many iterations. So fork the recv and send handler so that we run both send and recv. In the future we can add a parameter to do more than a single fork of tx/rx. With this we can get many GBps of data which helps exercise the sockmap code. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 John Fastabend 提交于
When testing BPF programs using sockmap I often want to have more control over how sendmsg is exercised. This becomes even more useful as new sockmap program types are added. This adds a test type option to select type of test to run. Currently, only "ping" and "sendmsg" are supported, but more can be added as needed. The new help argument gives the following, Usage: ./sockmap --cgroup <cgroup_path> options: --help -h --cgroup -c --rate -r --verbose -v --iov_count -i --length -l --test -t Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 John Fastabend 提交于
sockmap sample program takes arguments from cmd line but it reads them in using offsets into the array. Because we want to add more arguments in the future lets do proper argument handling. Also refactor code to pull apart sock init and ping/pong test. This allows us to add new tests in the future. Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NMartin KaFai Lau <kafai@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Alexei Starovoitov 提交于
mostly revert the previous workaround and make 'dubious pointer arithmetic' test useful again. Use (ptr - ptr) << const instead of ptr << const to generate large scalar. The rest stays as before commit 2b36047e. Fixes: 2b36047e ("selftests/bpf: fix test_align") Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Prashant Bhole 提交于
Bug: BPF programs and maps related to sockmaps test exist in memory even after test_maps ends. This patch fixes it as a short term workaround (sockmap kernel side needs real fixing) by empyting sockmaps when test ends. Fixes: 6f6d33f3 ("bpf: selftests add sockmap tests") Signed-off-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> [ daniel: Note on workaround. ] Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Alexei Starovoitov 提交于
The test incorrectly doing mkdir /mnt/cgroup-test-work-dirtest-bpf-based-device-cgroup instead of mkdir /mnt/cgroup-test-work-dir/test-bpf-based-device-cgroup somehow such mkdir succeeds and new directory appears: /mnt/cgroup-test-work-dir/cgroup-test-work-dirtest-bpf-based-device-cgroup Later cleanup via nftw("/mnt/cgroup-test-work-dir", ...); doesn't walk this directory. "rmdir /mnt/cgroup-test-work-dir" succeeds, but bpf program and dangling cgroup stays in memory. That's a separate issue on a cgroup side. For now fix the test. Fixes: 37f1ba09 ("selftests/bpf: add a test for device cgroup controller") Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Alexei Starovoitov 提交于
test_hashmap_walk takes very long time on debug kernel with kasan on. Reduce the number of iterations in this test without sacrificing test coverage. Also add printfs as progress indicator. Signed-off-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Yonghong Song 提交于
Commit 111e6b45 ("selftests/bpf: make test_verifier run most programs") enables tools/testing/selftests/bpf/test_verifier unit cases to run via bpf_prog_test_run command. With the latest code base, test_verifier had one test case failure: ... #473/p check deducing bounds from const, 2 FAIL retval 1 != 0 0: (b7) r0 = 1 1: (75) if r0 s>= 0x1 goto pc+1 R0=inv1 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 2: (95) exit from 1 to 3: R0=inv1 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 3: (d5) if r0 s<= 0x1 goto pc+1 R0=inv1 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 4: (95) exit from 3 to 5: R0=inv1 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_-1 5: (1f) r1 -= r0 6: (95) exit processed 7 insns (limit 131072), stack depth 0 ... The test case does not set return value in the test structure and hence the return value from the prog run is assumed to be 0. However, the actual return value is 1. As a result, the test failed. The fix is to correctly set the return value in the test structure. Fixes: 111e6b45 ("selftests/bpf: make test_verifier run most programs") Signed-off-by: NYonghong Song <yhs@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Yonghong Song 提交于
In commit b471f2f1 ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map"), the implemented MAP_GET_NEXT_KEY callback function is guarded with rcu read lock. In the function body, "kmalloc(size, GFP_USER | __GFP_NOWARN)" is used which may sleep and violate rcu read lock region requirements. This patch fixed the issue by using GFP_ATOMIC instead to avoid blocking kmalloc. Tested with CONFIG_DEBUG_ATOMIC_SLEEP=y as suggested by Eric Dumazet. Fixes: b471f2f1 ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map") Signed-off-by: NYonghong Song <yhs@fb.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
- 23 1月, 2018 2 次提交
-
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c:50:34: warning: symbol 'hw_atl_boards' was not declared. Should it be static? Fixes: 4948293f ("net: aquantia: Introduce new AQC devices and capabilities") Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Acked-by: NIgor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fix to return error code -ENOMEM from the aq_ndev_alloc() error handling case instead of 0, as done elsewhere in this function. Fixes: 23ee07ad ("net: aquantia: Cleanup pci functions module") Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Acked-by: NIgor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-