- 25 9月, 2017 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Ingo Molnar: "Another round of CR3/PCID related fixes (I think this addresses all but one of the known problems with PCID support), an objtool fix plus a Clang fix that (finally) solves all Clang quirks to build a bootable x86 kernel as-is" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Fix inline asm call constraints for Clang objtool: Handle another GCC stack pointer adjustment bug x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code x86/mm: Factor out CR3-building code
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fix from Ingo Molnar: "A clocksource driver section mismatch fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/integrator: Fix section mismatch warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Ingo Molnar: "Three irqchip driver fixes, and an affinity mask helper function bug fix affecting x86" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "genirq: Restrict effective affinity to interrupts actually using it" irqchip.mips-gic: Fix shared interrupt mask writes irqchip/gic-v4: Fix building with ancient gcc irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull address-limit checking fixes from Ingo Molnar: "This fixes a number of bugs in the address-limit (USER_DS) checks that got introduced in the merge window, (mostly) affecting the ARM and ARM64 platforms" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/syscalls: Move address limit check in loop arm/syscalls: Optimize address limit check Revert "arm/syscalls: Check address limit on user-mode return" syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_check
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull misc security layer update from James Morris: "This is the remaining 'general' change in the security tree for v4.14, following the direct merging of SELinux (+ TOMOYO), AppArmor, and seccomp. That's everything now for the security tree except IMA, which will follow shortly (I've been traveling for the past week with patchy internet)" * 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: security: fix description of values returned by cap_inode_need_killpriv
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull TPM updates from James Morris: "Here are the TPM updates from Jarkko for v4.14, which I've placed in their own branch (next-tpm). I ended up cherry-picking them as other changes had been made in Jarkko's branch after he sent me his original pull request. I plan on maintaining a separate branch for TPM (and other security subsystems) from now on. From Jarkko: 'Not much this time except a few fixes'" * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: ibmvtpm: simplify crq initialization and document crq format tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers Documentation: tpm: add powered-while-suspended binding documentation tpm: tpm_crb: constify acpi_device_id. tpm: vtpm: constify vio_device_id
-
- 24 9月, 2017 7 次提交
-
-
由 Michal Suchanek 提交于
The crq is passed in registers and is the same on BE and LE hosts. However, current implementation allocates a structure on-stack to represent the crq, initializes the members swapping them to BE, and loads the structure swapping it from BE. This is pointless and causes GCC warnings about ununitialized members. Get rid of the structure and the warnings. Signed-off-by: NMichal Suchanek <msuchanek@suse.de> Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
由 Hamza Attak 提交于
The patch simply replaces all msleep function calls with usleep_range calls in the generic drivers. Tested with an Infineon TPM 1.2, using the generic tpm-tis module, for a thousand PCR extends, we see results going from 1m57s unpatched to 40s with the new patch. We obtain similar results when using the original and patched tpm_infineon driver, which is also part of the patch. Similarly with a STM TPM 2.0, using the CRB driver, it takes about 20ms per extend unpatched and around 7ms with the new patch. Note that the PCR consistency is untouched with this patch, each TPM has been tested with 10 million extends and the aggregated PCR value is continuously verified to be correct. As an extension of this work, this could potentially and easily be applied to other vendor's drivers. Still, these changes are not included in the proposed patch as they are untested. Signed-off-by: NHamza Attak <hamza@hpe.com> Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
由 Enric Balletbo i Serra 提交于
Add a new powered-while-suspended property to control the behavior of the TPM suspend/resume. Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: NSonny Rao <sonnyrao@chromium.org> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
由 Arvind Yadav 提交于
acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 4198 608 0 4806 12c6 drivers/char/tpm/tpm_crb.o File size After adding 'const': text data bss dec hex filename 4262 520 0 4782 12ae drivers/char/tpm/tpm_crb.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
由 Arvind Yadav 提交于
vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
由 Stefan Berger 提交于
cap_inode_need_killpriv returns 1 if security.capability exists and has a value and inode_killpriv() is required, 0 otherwise. Fix the description of the return value to reflect this. Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: NSerge Hallyn <serge@hallyn.com> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: - Unbreak parisc bootloader by avoiding a gcc-7 optimization to convert multiple byte-accesses into one word-access. - Add missing HWPOISON page fault handler code. I completely missed that when I added HWPOISON support during this merge window and it only showed up now with the madvise07 LTP test case. - Fix backtrace unwinding to stop when stack start has been reached. - Issue warning if initrd has been loaded into memory regions with broken RAM modules. - Fix HPMC handler (parisc hardware fault handler) to comply with architecture specification. - Avoid compiler warnings about too large frame sizes. - Minor init-section fixes. * 'parisc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Unbreak bootloader due to gcc-7 optimizations parisc: Reintroduce option to gzip-compress the kernel parisc: Add HWPOISON page fault handler code parisc: Move init_per_cpu() into init section parisc: Check if initrd was loaded into broken RAM parisc: Add PDCE_CHECK instruction to HPMC handler parisc: Add wrapper for pdc_instr() firmware function parisc: Move start_parisc() into init section parisc: Stop unwinding at start of stack parisc: Fix too large frame size warnings
-
- 23 9月, 2017 27 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Doug Ledford: - Smattering of miscellanous fixes - A five patch series for i40iw that had a patch (5/5) that was larger than I would like, but I took it because it's needed for large scale users - An 8 patch series for bnxt_re that landed right as I was leaving on PTO and so had to wait until now...they are all appropriate fixes for -rc IMO * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (22 commits) bnxt_re: Don't issue cmd to delete GID for QP1 GID entry before the QP is destroyed bnxt_re: Fix memory leak in FRMR path bnxt_re: Remove RTNL lock dependency in bnxt_re_query_port bnxt_re: Fix race between the netdev register and unregister events bnxt_re: Free up devices in module_exit path bnxt_re: Fix compare and swap atomic operands bnxt_re: Stop issuing further cmds to FW once a cmd times out bnxt_re: Fix update of qplib_qp.mtu when modified i40iw: Add support for port reuse on active side connections i40iw: Add missing VLAN priority i40iw: Call i40iw_cm_disconn on modify QP to disconnect i40iw: Prevent multiple netdev event notifier registrations i40iw: Fail open if there are no available MSI-X vectors RDMA/vmw_pvrdma: Fix reporting correct opcodes for completion IB/bnxt_re: Fix frame stack compilation warning IB/mlx5: fix debugfs cleanup IB/ocrdma: fix incorrect fall-through on switch statement IB/ipoib: Suppress the retry related completion errors iw_cxgb4: remove the stid on listen create failure iw_cxgb4: drop listen destroy replies if no ep found ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix NAPI poll list corruption in enic driver, from Christian Lamparter. 2) Fix route use after free, from Eric Dumazet. 3) Fix regression in reuseaddr handling, from Josef Bacik. 4) Assert the size of control messages in compat handling since we copy it in from userspace twice. From Meng Xu. 5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.) from Ursula Braun. 6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn. 7) Don't use ARRAY_SIZE on spinlock array which might have zero entries, from Geert Uytterhoeven. 8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov Kasiviswanathan. 9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) inet: fix improper empty comparison net: use inet6_rcv_saddr to compare sockets net: set tb->fast_sk_family net: orphan frags on stand-alone ptype in dev_queue_xmit_nit MAINTAINERS: update git tree locations for ieee802154 subsystem net: prevent dst uses after free net: phy: Fix truncation of large IRQ numbers in phy_attached_print() net/smc: no close wait in case of process shut down net/smc: introduce a delay net/smc: terminate link group if out-of-sync is received net/smc: longer delay for client link group removal net/smc: adapt send request completion notification net/smc: adjust net_device refcount net/smc: take RCU read lock for routing cache lookup net/smc: add receive timeout check net/smc: add missing dev_put net: stmmac: Cocci spatch "of_table" lan78xx: Use default values loaded from EEPROM/OTP after reset lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE lan78xx: Fix for eeprom read/write when device auto suspend ...
-
由 Linus Torvalds 提交于
Merge tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor updates from John Johansen: "This is the apparmor pull request, similar to SELinux and seccomp. It's the same series that I was sent to James' security tree + one regression fix that was found after the series was sent to James and would have been sent for v4.14-rc2. Features: - in preparation for secid mapping add support for absolute root view based labels - add base infastructure for socket mediation - add mount mediation - add signal mediation minor cleanups and changes: - be defensive, ensure unconfined profiles have dfas initialized - add more debug asserts to apparmorfs - enable policy unpacking to audit different reasons for failure - cleanup conditional check for label in label_print - Redundant condition: prev_ns. in [label.c:1498] Bug Fixes: - fix regression in apparmorfs DAC access permissions - fix build failure on sparc caused by undeclared signals - fix sparse report of incorrect type assignment when freeing label proxies - fix race condition in null profile creation - Fix an error code in aafs_create() - Fix logical error in verify_header() - Fix shadowed local variable in unpack_trans_table()" * tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix apparmorfs DAC access permissions apparmor: fix build failure on sparc caused by undeclared signals apparmor: fix incorrect type assignment when freeing proxies apparmor: ensure unconfined profiles have dfas initialized apparmor: fix race condition in null profile creation apparmor: move new_null_profile to after profile lookup fns() apparmor: add base infastructure for socket mediation apparmor: add more debug asserts to apparmorfs apparmor: make policy_unpack able to audit different info messages apparmor: add support for absolute root view based labels apparmor: cleanup conditional check for label in label_print apparmor: add mount mediation apparmor: add the ability to mediate signals apparmor: Redundant condition: prev_ns. in [label.c:1498] apparmor: Fix an error code in aafs_create() apparmor: Fix logical error in verify_header() apparmor: Fix shadowed local variable in unpack_trans_table()
-
由 Josh Poimboeuf 提交于
For inline asm statements which have a CALL instruction, we list the stack pointer as a constraint to convince GCC to ensure the frame pointer is set up first: static inline void foo() { register void *__sp asm(_ASM_SP); asm("call bar" : "+r" (__sp)) } Unfortunately, that pattern causes Clang to corrupt the stack pointer. The fix is easy: convert the stack pointer register variable to a global variable. It should be noted that the end result is different based on the GCC version. With GCC 6.4, this patch has exactly the same result as before: defconfig defconfig-nofp distro distro-nofp before 9820389 9491555 8816046 8516940 after 9820389 9491555 8816046 8516940 With GCC 7.2, however, GCC's behavior has changed. It now changes its behavior based on the conversion of the register variable to a global. That somehow convinces it to *always* set up the frame pointer before inserting *any* inline asm. (Therefore, listing the variable as an output constraint is a no-op and is no longer necessary.) It's a bit overkill, but the performance impact should be negligible. And in fact, there's a nice improvement with frame pointers disabled: defconfig defconfig-nofp distro distro-nofp before 9796316 9468236 9076191 8790305 after 9796957 9464267 9076381 8785949 So in summary, while listing the stack pointer as an output constraint is no longer necessary for newer versions of GCC, it's still needed for older versions. Suggested-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: NMatthias Kaehlcke <mka@chromium.org> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Josh Poimboeuf 提交于
The kbuild bot reported the following warning with GCC 4.4 and a randconfig: net/socket.o: warning: objtool: compat_sock_ioctl()+0x1083: stack state mismatch: cfa1=7+160 cfa2=-1+0 This is caused by another GCC non-optimization, where it backs up and restores the stack pointer for no apparent reason: 2f91: 48 89 e0 mov %rsp,%rax 2f94: 4c 89 e7 mov %r12,%rdi 2f97: 4c 89 f6 mov %r14,%rsi 2f9a: ba 20 00 00 00 mov $0x20,%edx 2f9f: 48 89 c4 mov %rax,%rsp This issue would have been happily ignored before the following commit: dd88a0a0 ("objtool: Handle GCC stack pointer adjustment bug") But now that objtool is paying attention to such stack pointer writes to/from a register, it needs to understand them properly. In this case that means recognizing that the "mov %rsp, %rax" instruction is potentially a backup of the stack pointer. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: dd88a0a0 ("objtool: Handle GCC stack pointer adjustment bug") Link: http://lkml.kernel.org/r/8c7aa8e9a36fbbb6655d9d8e7cea58958c912da8.1505942196.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI fixes from Rafael Wysocki: "These fix the initialization of resources in the ACPI WDAT watchdog driver, a recent regression in the ACPI device properties handling, a recent change in behavior causing the ACPI_HANDLE() macro to only work for GPL code and create a MAINTAINERS entry for ACPI PMIC drivers in order to specify the official reviewers for that code. Specifics: - Fix the initialization of resources in the ACPI WDAT watchdog driver that uses unititialized memory which causes compiler warnings to be triggered (Arnd Bergmann). - Fix a recent regression in the ACPI device properties handling that causes some device properties data to be skipped during enumeration (Sakari Ailus). - Fix a recent change in behavior that caused the ACPI_HANDLE() macro to stop working for non-GPL code which is a problem for the NVidia binary graphics driver, for example (John Hubbard). - Add a MAINTAINERS entry for the ACPI PMIC drivers to specify the official reviewers for that code (Rafael Wysocki)" * tag 'acpi-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again ACPI / watchdog: properly initialize resources ACPI / PMIC: Add code reviewers to MAINTAINERS
-
由 David S. Miller 提交于
Josef Bacik says: ==================== net: fix reuseaddr regression I introduced a regression when reworking the fastreuse port stuff that allows bind conflicts to occur once a reuseaddr successfully opens on an existing tb. The root cause is I reversed an if statement which caused us to set the tb as if there were no owners on the socket if there were, which obviously is not correct. Dave could you please queue these changes up for -stable, I've run them through the net tests and added another test to check for this problem specifically. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Josef Bacik 提交于
When doing my reuseport rework I screwed up and changed a if (hlist_empty(&tb->owners)) to if (!hlist_empty(&tb->owners)) This is obviously bad as all of the reuseport/reuse logic was reversed, which caused weird problems like allowing an ipv4 bind conflict if we opened an ipv4 only socket on a port followed by an ipv6 only socket on the same port. Fixes: b9470c27 ("inet: kill smallest_size and smallest_port") Reported-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Josef Bacik 提交于
In ipv6_rcv_saddr_equal() we need to use inet6_rcv_saddr(sk) for the ipv6 compare with the fast socket information to make sure we're doing the proper comparisons. Fixes: 637bc8bb ("inet: reset tb->fastreuseport when adding a reuseport sk") Reported-and-tested-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Josef Bacik 提交于
We need to set the tb->fast_sk_family properly so we can use the proper comparison function for all subsequent reuseport bind requests. Fixes: 637bc8bb ("inet: reset tb->fastreuseport when adding a reuseport sk") Reported-and-tested-by: NCole Robinson <crobinso@redhat.com> Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
Zerocopy skbs frags are copied when the skb is looped to a local sock. Commit 1080e512 ("net: orphan frags on receive") introduced calls to skb_orphan_frags to deliver_skb and __netif_receive_skb for this. With msg_zerocopy, these skbs can also exist in the tx path and thus loop from dev_queue_xmit_nit. This already calls deliver_skb in its loop. But it does not orphan before a separate pt_prev->func(). Add the missing skb_orphan_frags_rx. Changes v1->v2: handle skb_orphan_frags_rx failure Fixes: 1f8b977a ("sock: enable MSG_ZEROCOPY") Signed-off-by: NWillem de Bruijn <willemb@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "These fix a cpufreq regression introduced by recent changes related to the generic DT driver, an initialization time memory leak in cpuidle on ARM, a PM core bug that may cause system suspend/resume to fail on some systems, a request type validation issue in the PM QoS framework and two documentation-related issues. Specifics: - Fix a regression in cpufreq on systems using DT as the source of CPU configuration information where two different code paths attempt to create the cpufreq-dt device object (there can be only one) and fix up the "compatible" matching for some TI platforms on top of that (Viresh Kumar, Dave Gerlach). - Fix an initialization time memory leak in cpuidle on ARM which occurs if the cpuidle driver initialization fails (Stefan Wahren). - Fix a PM core function that checks whether or not there are any system suspend/resume callbacks for a device, but forgets to check legacy callbacks which then may be skipped incorrectly and the system may crash and/or the device may become unusable after a suspend-resume cycle (Rafael Wysocki). - Fix request type validation for latency tolerance PM QoS requests which may lead to unexpected behavior (Jan Schönherr). - Fix a broken link to PM documentation from a header file and a typo in a PM document (Geert Uytterhoeven, Rafael Wysocki)" * tag 'pm-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: ti-cpufreq: Support additional am43xx platforms ARM: cpuidle: Avoid memleak if init fail cpufreq: dt-platdev: Add some missing platforms to the blacklist PM: core: Fix device_pm_check_callbacks() PM: docs: Drop an excess character from devices.rst PM / QoS: Use the correct variable to check the QoS request type driver core: Fix link to device power management documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input fixes from Dmitry Torokhov: - fixes for two long standing issues (lock up and a crash) in force feedback handling in uinput driver - tweak to firmware update timing in Elan I2C touchpad driver. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - extend Flash-Write delay Input: uinput - avoid crash when sending FF request to device going away Input: uinput - avoid FF flush when destroying device
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull seccomp updates from Kees Cook: "Major additions: - sysctl and seccomp operation to discover available actions (tyhicks) - new per-filter configurable logging infrastructure and sysctl (tyhicks) - SECCOMP_RET_LOG to log allowed syscalls (tyhicks) - SECCOMP_RET_KILL_PROCESS as the new strictest possible action - self-tests for new behaviors" [ This is the seccomp part of the security pull request during the merge window that was nixed due to unrelated problems - Linus ] * tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: samples: Unrename SECCOMP_RET_KILL selftests/seccomp: Test thread vs process killing seccomp: Implement SECCOMP_RET_KILL_PROCESS action seccomp: Introduce SECCOMP_RET_KILL_PROCESS seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD seccomp: Action to log before allowing seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW seccomp: Selftest for detection of filter flag support seccomp: Sysctl to configure actions that are allowed to be logged seccomp: Operation for checking if an action is available seccomp: Sysctl to display available actions seccomp: Provide matching filter for introspection selftests/seccomp: Refactor RET_ERRNO tests selftests/seccomp: Add simple seccomp overhead benchmark selftests/seccomp: Add tests for basic ptrace actions
-
由 Linus Torvalds 提交于
Merge tag '4.14-smb3-fixes-from-recent-test-events-for-stable' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Various SMB3 fixes for stable and security improvements from the recently completed SMB3/Samba test events * tag '4.14-smb3-fixes-from-recent-test-events-for-stable' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags SMB3: handle new statx fields SMB: Validate negotiate (to protect against downgrade) even if signing off cifs: release auth_key.response for reconnect. cifs: release cifs root_cred after exit_cifs CIFS: make arrays static const, reduces object code size [SMB3] Update session and share information displayed for debugging SMB2/SMB3 cifs: show 'soft' in the mount options for hard mounts SMB3: Warn user if trying to sign connection that authenticated as guest SMB3: Fix endian warning Fix SMB3.1.1 guest authentication to Samba
-
git://github.com/ceph/ceph-client由 Linus Torvalds 提交于
Pull ceph fixes from Ilya Dryomov: "Two small but important fixes: RADOS semantic change in upcoming v12.2.1 release and a rare NULL dereference in create_session_open_msg()" * tag 'ceph-for-4.14-rc2' of git://github.com/ceph/ceph-client: ceph: avoid panic in create_session_open_msg() if utsname() returns NULL libceph: don't allow bidirectional swap of pg-upmap-items
-
由 Stefan Schmidt 提交于
Patches for ieee802154 will go through my new trees towards netdev from now on. The 6LoWPAN subsystem will stay as is (shared between ieee802154 and bluetooth) and go through the bluetooth tree as usual. Signed-off-by: NStefan Schmidt <stefan@osg.samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steve French 提交于
Signed-off-by: NSteve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com> Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: - fix endpoint "end of test" interrupt issue (introduced in v4.14-rc1) (John Keeping) - fix MIPS use-after-free map_irq() issue (introduced in v4.14-rc1) (Lorenzo Pieralisi) * tag 'pci-v4.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: endpoint: Use correct "end of test" interrupt MIPS: PCI: Move map_irq() hooks out of initdata
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU fixes from Joerg Roedel: - two Kconfig fixes to fix dependencies that cause compile failures when they are not fulfilled. - a section mismatch fix for Intel VT-d - a fix for PCI topology detection in ARM device-tree code * tag 'iommu-fixes-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/of: Remove PCI host bridge node check iommu/qcom: Depend on HAS_DMA to fix compile error iommu/vt-d: Fix harmless section mismatch warning iommu: Add missing dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull arch/tile fixes from Chris Metcalf: "These are a code cleanup and config cleanup, respectively" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: array underflow in setup_maxnodemem() tile: defconfig: Cleanup from old Kconfig options
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - #ifdef CONFIG_EFI around __efi_fpsimd_begin/end - Assembly code alignment reduced to 4 bytes from 16 - Ensure the kernel is compiled for LP64 (there are some arm64 compilers around defaulting to ILP32) - Fix arm_pmu_acpi memory leak on the error path * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: drivers/perf: arm_pmu_acpi: Release memory obtained by kasprintf arm64: ensure the kernel is compiled for LP64 arm64: relax assembly code alignment from 16 byte to 4 byte arm64: efi: Don't include EFI fpsimd save/restore code in non-EFI kernels
-
由 Steve French 提交于
We weren't returning the creation time or the two easily supported attributes (ENCRYPTED or COMPRESSED) for the getattr call to allow statx to return these fields. Signed-off-by: NSteve French <smfrench@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>\ Acked-by: NJeff Layton <jlayton@poochiereds.net> CC: Stable <stable@vger.kernel.org> Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
-
由 Tobias Klauser 提交于
Some architectures define the no-op macros/functions copy_segments, release_segments and forget_segments. These are used nowhere in the tree, so removed them. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: Vineet Gupta <vgupta@synopsys.com> [for arch/arc] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
* acpi-pmic: ACPI / PMIC: Add code reviewers to MAINTAINERS * acpi-bus: ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again * acpi-wdat: ACPI / watchdog: properly initialize resources * acpi-properties: ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly
-
由 Rafael J. Wysocki 提交于
* pm-cpufreq: cpufreq: ti-cpufreq: Support additional am43xx platforms cpufreq: dt-platdev: Add some missing platforms to the blacklist * pm-cpuidle: ARM: cpuidle: Avoid memleak if init fail
-
由 Rafael J. Wysocki 提交于
* pm-core: PM: core: Fix device_pm_check_callbacks() * pm-qos: PM / QoS: Use the correct variable to check the QoS request type * pm-docs: PM: docs: Drop an excess character from devices.rst driver core: Fix link to device power management documentation
-